Word document disappear after saving

I was working on a wrod document and after i saved the document i went to close it. After closing the document i went to submit it via email and the paper is nowhere on my computer. My recent files says i was not on word for the last 2 days! Can i fin this document? I have tried searching for the title and can't find anything.

Yes. I have searched for the name that i named it. It is not in my computer anywhere. It is not in documents, it is not in recent documents in word. My word processor says i have not been on word in 2 days.

Similar Messages

Word document disappeared after saving and letting go flat

I spent my whole day doing coursework and saved it for certain
Then I let my laptop go flat because I was going to charger it later and no longer needed it
Then once charged again I went to find the file and it was gone?
help??

Yes. I have searched for the name that i named it. It is not in my computer anywhere. It is not in documents, it is not in recent documents in word. My word processor says i have not been on word in 2 days.

Journal entry disappears after saving and not available to post

Hi Gurus
On BPC for Netweaver version 7.5 and excel 2003 i am able to save the journal entry but am not able to post it since it disappears after saving. I could see the Journal ID being generated and then the layout gets cleared . i am unable to post this journal. Also when i go to journal manager and tries to list the journals this saved journal does not show up.
I have already set the application parameter "JRN_MAXCOUNT" to 1000 so that i can see the journals that i create.
Have any of you faced such an issue?
Regards

Hi Tara,
Thank you very much for your tip. I had Datasource as one of the header fields and i moved it to the item fields to make it work. I am still not sure why does that. May be because when we create the journal template system proposes only the required fields in Header and if select additional ones its not liking it.
I cannot come up with a reasoning why we cannot incorporate a non required field in header journal template . The obvious reason that i included the datasource dimension in header itself was because it was a common value that i want to use for all my journals.
Anyway i hope SAP would either fix this or come up with a reasoning.
Thanks again..

I cant find word document that i saved on my desktop

i cant find word document that i saved on my desktop

If you are sure you saved to your desktop and have not moved it, go to Finder>View. Try all the clean up settings.

Reminders no longer work. Alert time disappears after saving.

After setting the date, time and alert the time disappears after saving.

Go to iCloud.com and check if your reminder on there has been backup. If all your remainder was backup. You can go to Settings>iCloud>Turn on Reminder
Sometimes iCloud setting should be turned on for Calendar or Reminder for it to work like to create new event on the calendar or reminder

My appleoworks drawing disappeared after saved as a microsoft document.

I saved my appleworks document as a microsoft one, closed it and when I returned to it all my drawings were gone. Is there anyway to prevent this from happening or is this just an incompatibility between microsoft and appleworks? It was so annoying the first time so I just went and used someone's windows pc to redo my work and send it out but I don't have access to a pc anymore. So how can I prevent appleworks from deleting my drawings after save it as a microsoft document?

AppleWorks does not make MS Word documents (just as MS Word does not create AppleWorks documents); it never has (nor has it ever been claimed). While you can save your text in a format that can be opened in Word, drawings and images will, more often than not, fail to be reproduced, and the document formatting may or may not be as originally intended. If a Microsoft Word document is what you need, then it will have to be created in MS Word.

MS Word document disappears

My wife was working on a couple of MS Word documents. Strangely, one of them disappeared. It hadn't been saved! I tried the Time Machine and it doesn't show on there.
Does anyone have ideas how I can retrieve this document?
Again, that document hadn't been saved yet, but it had plenty of data on it. (I reminded her of the need to backup data frequently!)

Have you tried in another user account? That will help isolate the problem to just your account or system-wide.
Have you tried in Safe Mode? That will help isolate third-party conflicts. http://support.apple.com/kb/HT1564
If the first works, there is something broken (possibly a settings file) in your user folder.
If the second works in your account, then the problem is tied to third-party software that runs at startup or login.

Imported Objects Disappear After Saving

I have been working on a project into which I've imported 4 Illustrator objects (If you look at the first image below, the objects are a lightpost, two figures, the word StoryFirst and the word Media). I saved the 4 objects as separate files in Illustrator and then imported each one as "Composition" while leaving the "Illustrator/PDF/EPS Sequence" box unchecked.
After saving the AE project last night, I reopened the project this morning and found this:
As you can see, the lightpost and figures objects are still visible in the composition pane, but the StoryFirst and Media objects have disappeared. The files are still listed in the project pane, however, and you can still select the object layers in the timeline and you will get the object wireframes in the composition pane as if they were still there, but the actual objects themselves are no longer visible. As you can see in the picture, when I select a layer of the StoryFirst object in the project pane, the mini-preview in the upper left corner doesn't even display it.
I've tried closing and reopening the project a few times as well as toggling on and off the eye switch on each layer in the timeline, both to no avail. I also tried right clicking on each layer and choosing "Replace File" and bringing everything back in again new. This makes the objects reappear at the moment I have the project open, but as soon as I save the project again, close it and reopen it, they've disappeared again! All object files are in the same place in my hard drive as they've always been. AE never prompted me with an error message that it couldn't locate files. This is a very bizarre problem I've never encountered before.
Any help in solving this mystery would be greatly appreciated! Thanks everyone!
Michael
Founder/Director, StoryFirst Media
www.storyfirstmedia.com

In AI, check your layers palette and inspect the structure of your groups. There may be odd combinations of e.g. groups with empty clipping masks (that cover the entire artboard and are only there, because the graphics were imported from a legacy version of AI or another program). That could lead to misinterpretation where then AE would clip the entire artwork. Similarly, look for things like Livepaint groups or live pathfinder groups. Same for art brushes, pattern brushes, pattern fills etc. In case of doubt, always do an Object --> Expand, then select the artwork and choose "Release Clipping mask". Often a bit optimization will do wonders. Also, one thing that came to mind after I wrote my last reply, is to check your swatches. Since AE operates in RGB mode only, it may not deal correctly with spot color swatches (Pantone) and CMYK swatches...
Mylenium

Why are some of my word documents scrambled after upgrading to snow leopard?

I just upgraded my desktop to 10.6.8 and I am experiencing more troubles....
1. 4-5 computer freezes per day and I only use it for about 2 hours.
2. My word documents are empty, only showing red squiggle lines as if something is spelled wrong.
No idea how to fix. Anyone?

Maybe your PDF file is composed of pictures? Can you select any of the text
in it, or does it select the entire page as a whole? If the latter, then
you can try to run Text Recognition on it before exporting it to Word.
On Tue, Jul 29, 2014 at 6:53 PM, phantom205 <[email protected]>

How can I get Home Share to work for iTunes?? I've followed the instructions but one I have activated Home Share, there is no "Shared" heading to link to my other computer. It (the word "Shared") disappears after I turn on Home Share.

I followed the instructions, but once I turn on "Home Sharing", the word "Shared" disappears from the left hand column of the iTunes window. So, where can I link to my other computer so I can share my music??

Make sure that the iTunes version is updated on your computers that you are using for Home Sharing. Also, I think that all of the computers have to be on with iTunes pulled up while you are trying to transfer data.
You have to have Home Sharing turned on with both computers. If you do have Home Sharing turned on with all of your computers, are your 'Shared' computers all authorized under the same account? If not, they should be.
Have you checked 'Share my library on my local network' in preferences? You should have the box checked for both computers.
I hope this helps!

Word documents disappeared from iPad

Hi!
I recently downloaded Office for iPad and continued a book I am writing in Word, since I find it easy to use.
After two days of writing (before i saved a back-up), I wanted to open the document (I saved it on my iPad), but it had disappeared!
When I tried opening it from the "recently used-box" it said it had either been moved or deleted.
I have not moved or deleted the file, I saved it on my iPad, but still it's gone.
Is there a way to access this file?

To recover from the iOS device, tap the '+' to start a new document and choose 'copy from iTunes'.
To recover from iTunes, connect the device, navigate to the apps tab and scroll down to the documents section.

Scripting for Conditional Advanced Actions disappears after saving - title remains

Hi, for the third time in a 24 hour period, after painstakingly entering 14 lines of variables and actions, the contents of the conditional AA script that I saved disappeared. Yes, I saved all of them! The name I gave it remains on the list of Advanced Actions, but clicking on it yields a virginal scripting window. At this point I've wasted a couple of hours re-writing the script only to have it go blank on me again. Any ideas?

It's actually a lot more complex than that.
Here is a list of words that should NOT be used when naming objects, slides, variables or actions in Captivate because they can conflict with existing code or names in the app:
abstract
accessibilityProperties
alpha
as
blendMode
boolean
break
buttonMode
byte
cacheAsBitmap
case
cast
catch
char
class
const
constructor
contextMenu
continue
currentFrame
currentframe
currentLabel
currentLabels
currentScene
debugger
default
delete
do
double
doubleClickEnabled
dropTarget
droptarget
dynamic
each
else
enabled
enum
export
extends
false
filters
final
finally
float
focusEnabled
focusRect
focusrect
for
forceSmoothing
framesLoaded
framesloaded
function
get
goto
graphics
height
height
highquality
hitArea
if
implements
import
in
include
instanceof
interface
internal
intrinsic
is
loaderInfo
lockroot
long
mask
menu
mouseChildren
mouseEnabled
mouseX
mouseY
name
name
namespace
native
new
null
numChildren
opaqueBackground
override
package
parent
parent
private
protected
prototype
public
quality
return
root
rotation
rotation
scale9Grid
scaleX
scaleY
scenes
scrollRect
set
short
soundbuftime
soundTransform
stage
static
stop
super
switch
synchronized
tabChildren
tabEnabled
tabIndex
target
textSnapshot
this
throw
throws
to
totalFrames
totalframes
trackAsMenu
transform
transient
true
try
type
typeof
url
use
useHandCursor
var
virtual
visible
visible
void
volatile
while
width
x
xmouse
xscale
y
ymouse
yscale

Values disappear after saving the Purchase Order and Goods Receipt PO

HI,
Our client is using SAP Business One 2007 A(8.00.181) SP 00 PL 47, When they raise Purchase Order for service item, the details and amount disappears automatically after adding the document and similar case for Good Receipt PO. But when they book directly in AP invoice the details and amount will appeared.So please help on solution for the above problem.
Best Regards,
Grayson

Dear Mr Burton,
If I understood correctly you cannot see the information inside the document you added. This made me think that it is a GUI issue.
In the second answer you specified that when you try to open it again you'll receive the error message saying that there is no total value or total and I assume there is no information in the document.
I believe the second issue is a consequence of the first one.
I was suggesting to open a message on the portal (the message that requires the S number from the partners) in order to investigate the issue better.
However, as you have an error message that pinpoints to certain fields it could be possible to see the information in the tables. Do you have this information?
Regards,
Marcella Rivi
SAP Business One Forums Team

Conrefs disappear after saving to xml

Hi all,
I'm having a weird issue with conrefs and I'm hoping someone can help.
I have 3 documents: DocA, DocB, and DocC.
I've been using conrefs to reuse rows in a table that need to be repeated in multiple files. DocA is the source file that contains the main content and DocB and DocC contain conrefs to table rows in Doc A.
When I insert the conrefs everything seems to go fine and I'm able to save all the docs as xml without error. However, after I close and reopen DocB, some of the cells are blank (e.g., in a 3 column table, some rows will still have content in column 1, but not column 2 or 3). When I look at the details for the affected rows, the conrefs seem to have disappeared.
I've tried reinserting the conrefs, and this seems to work fine until I reopen the file. When I reopen the file, the conrefs I fixed generally appear, but cells in a different row are missing. To make matters even weirder, DocC, which contains conrefs to the exact same rows, works fine and all the conrefs show up.
This problem has occured in several sets of files. I really don't know what to do. I've tried reassigning IDs to all of the source rows in DocA and rebuilding the tables in DocB and DocC, but the same problem keeps popping up (sometimes it goes away for a few days and then returns).
I've also checked the DITA Options and the "Auto-Load Conrefs On File Open" is enabled.
Has anyone run into a similar problem or know anything about this? I'm getting nervous about using conrefs at all if they can disappear without warning!
Any advice would be greatly appreciated.
Thanks!
D'Arcy

Be sure to check the console window .. this won't be an error message that pops up .. maybe you already know that, but just wanted to make sure.
I'll have to test this in FM10. I use (and make) DITA-FMx where this works fine, but will test it in default FM-DITA and see if there's a problem. Do you have the latest FM10 patches installed? I do recall some issues with table conrefs in early FM10, but think they were fixed later .. the current version is 10.0.2.419.
... testing ...
OK, just tested it and sure enough, it doesn't seem to work .. conreffing either rows or cells .. it works when you insert it, but doesn't resolve when opened. The data is still valid, but it just doesn't render in FM. When I open the files I created in FM10 (default DITA support) with DITA-FMx, the conrefs show up just fine. If you really need table conrefs, it might just be a good reason to buy DITA-FMx ..
http://leximation.com/dita-fmx/
Cheers,
...scott
Scott Prentice
Leximation, Inc.
www.leximation.com

Adobe documents disappear after opening

Using windows 7 on laptop and every time I open an adobe attachment it opens then disappears. Can anyone help please?

Hi Pat
I think it seems to have sorted itself out now although I still dont know why it was doing it. I didn't explain it very well. The documents don't disappear themselves they just close immediately after they open, ie they wont stay open.
Not sure what I did but in playing around with it earlier it seems to have stopped doing that. Just hoping it doesnt start again tommorrow!
thanks for answering though
Best Regards
Paula
[private data removed]

Word document disappear after saving

Similar Messages

Maybe you are looking for