Word forward & backward reverse
i have problem in most word files "its happen in word 2007,2010,2013" when I press forward arrow go backward or when press backward arrow go forward. I don't know how to fix it.
Are you using the arrow keys to move the insertion point in text? Or are you doing something else?
Does the problem occur only in Word? Have you tried a different keyboard?
Stefan Blom, Microsoft Word MVP
only with keyboard and only happen in Word.my keyboard is working fine.by the way its happen even when create new file of word.
its happen in most of versions of Office but now i'm using Office 2013 64bits.
Similar Messages
-
Forward and Reverse Pricing Calculations in the Same Pricing procedure
Hello,
I have a requirement where the Pricing has to set up to do the forward as reverse calculations in the same pricing procedure,For example:
There is :
PR00-Base Price
Less
K004:Discount(%)
will give
ZN00:Net Price
Less Cost
EK02
will give the Profit Margin-ZMAR
Forward calculation is possible as per SAP standard but the requirement is also to do reverse calculation such as
By entering Profit Margin-,The system should do a backward(Reverse calculation) and arrive on the Net price from the Net Price(ZN00) it should calculate the Duscount automatically.
Your inputs on this would be most helpful.
Regards
Mohammed Roshanhi,
In Sale Order / Billing, in normal circumstances, tax will be calculated on the base price. On the other hand, if you want the system to reverse calculate, you can achieve the same.
In normal circumstances, system will calculate as follows:-,
you maintained the PR00 of a material as Rs 200.00
and Discount Rs. 25.00
Net Value Rs.175.00
If you want to reverse calculate which means your invoice value itself should be Rs.200.00 which is inclusive of Discount. Then your Discount condition type (or in case there is tax, any tax condition type - MWST / UTXJ) have the Calculation Type as u201CHu201D
With the above settings, your actual PR00 value would be 225.00 only, though you maintained Rs.200.00 for PR00. -
How do I make my Timeline play forward or reverse depending on its current location?
I'm attempting to make a side scrolling site. I have a wide div set up in the main timeline that animates 1000px at a time on the x-coordinate between the labels I have set for each "page".
I would like to click a button and go to the associated label and stop. I am faced with 2 problems:
1. Sometimes this would require the playhead to move in reverse rather than forward.
2. I originally had stop triggers on the timeline under the labels but if I am able to get my first problem fixed these triggers would stop the animatin before reaching the label.
I'm just learning java so I'm guessing I need an if statement and a function.
Example of what I'm trying to figure out:
I want to press work button and play to label "work".
If I'm at label "home" I need to play(); and stop at label "work". If I were at label "blog" I would need to playReverse(); to label "work".
Please help! I've been going looney trying to figure it out!Thank you for your reply!
My post may have been a little misleading...
I have a navigation bar with 5 items. Home, work, blog, about, contact. My main timeline has a symbol that is 6000px wide. Inside that symbol are individual symbols that make each of these "pages" which are 1000px each. My timeline has animations that last 1.5 secs each and animate the main symbol 1000px on the x dimension to stop on the main stage which is 1000px. Essentially it creates a 5 "page" side scrolling layout. I have the five labels on the timeline starting at 0s with "home", 1.5s labeled "work", 3s labeled "blog"... etc.
I wish to be able to click blog and travel forward or reverse on the timeline and then stop on "blog". Then If you click home you should reverse along the timeline and stop on "home". If I have any stop(); triggers on the timeline it would stop in transition to my target label without reaching it. In addition a generic play(); or playReverse(); doesnt target a specific label which is whats required for my navigation bar.
I need to play forward or reverse from the current location on the timeline and stop when it reaches a specific label. Visually you would be sliding back and forth across the pages as you use the navigation.
Is there a way to do this with variables?
I'm going to try triggers on the timeline like this sym.setVariable("pageValue", "home"); when on the "home" label. sym.setVariable("pageValue", "work"); when on the "work" label.
but then how would I tie that to my buttons?
If I click work and I'm on home I need it to check: var myVariable = sym.getVariable("pageValue"); and then an if or else statement I think? I'm such a noob. I'm trying really hard to grasp it
something like: if pageValue = "home" { sym.play();} else if pageValue = "blog","about","contact" {sym.playReverse} if pageValue = "work" {sym.stop();};
I know there is probably all kinds of syntax errors there but can someone understand what I'm getting at?
to make this even more tricky I am interacting with the stage with an html and css navigation bar that lays over the stage so I need this to be in function style (see code)
function goHome()
javascript:var targetComp = AdobeEdge.getComposition('EDGE-57204389');
targetComp.getStage().playReverse();
and then call it like this in html
<li><a href="javascript:goHome();" class="three-d">
Dynamic
<span class="three-d-box"><span class="front">Dynamic</span><span class="back">Artisans</span></span>
</a></li>
This works to play the stage in reverse but its not the functionality I need. Any help would be greatly appreciated and a great learning point for me and hopefully others in my situation! -
On iOS 7.0.2 everytime I unlock my phone while my music is playing, it skips. Forward, backward, and by small and large amounts of time.
Hi cowboyincognito,
Thanks for visiting Apple Support Communities.
If you don't have the option to play music by genre on your iPhone, try this step to find the Genre option:
Browse your music library.
You can browse your music by playlist, artist, or other category. For other browse options, tap More. Tap any song to play it.
To rearrange the tabs in the Music app, tap More, then tap Edit and drag a button onto the one you want to replace.
Best Regards,
Jeremy -
To extend a clip I have `Show Fine Tuning controls' turned on in my iMovie 11 preferences, but the blue forward/backward buttons don't appear. To get the orange handle bar, is there a hotkey?
That's a comment in the file. It has no effect at all.
-
Internet Explorer's forward/backward for next/previous image
In addition to right/left arrow to move to next/previous image I would like LR team to add this keyboard shortcut:
Use Internet Explorer's forward for next image.
Use Internet Explorer's backward for previous image.
Here is the reason. I have ViewSonic mouse with five buttons. Extra two buttons I use for forward/backward command within Internet Explorer. It would be nice if the same two extra buttons I could use in LR.
At the moment I have the two extra buttons programmed to function as right/left arrow. That allows me to use them to go next/previous image in LR. In order to use them as a forward/backward command within IE I have to press Alt key.
It would be nice if LR team could add IE forward/backward to the list of keyboard shortcuts.
Best regards,
Ivan KmeckoThis is a function of the mouse driver...you should be able to configure settings based on the current application so LR and IE can use the same keys but it'll mean different things in each app.
-
I can't get big forward/backward buttons
I have always customized my Firefox browser (thats why I have always loved Firefox since back in version 1.x. However I noticed that Firefox is suddenly becoming less and less customizable and more and more frustrating. I have gotten it to where I want it (almost). For some reason my forward/backward buttons are stuck on small. When they are in the "Navigation Toolbar" they are nice and big, but they shrink in the "Menu Bar". They never did this in 3.6 or prior to 3.6, they always worked fine. I tried turning "Small Icons" on and off with no success.
Here's what I mean:
http://i1202.photobucket.com/albums/bb375/murdockx/ff5.jpgIn edit mode, at concert level, select the pedal. Then in the screen control inspector, in the mappings tab, select actions>next patch.
-
Step Forward/Backward One Field
Sadly, Avid Media Composer has been my daily editing tool (my place of employment is an Avid house). I started on FCP and freelance using my FCP machine... believe me, I would very much rather be cutting on FCP. Going from FCP to Avid is... well... an interesting and frustrating experience.
However, AMC does has some useful features. One in particular is the "Step Forward/Backward 1 field."
I searched the manuals and the FCP shortcut tool, but I don't really see anything similar-- unless I'm totally missing something. Does FCP have such a feature?
Thanks a bunch.
Message was edited by: Anthony TutroneYou know what, unfortunately even that doesn't really work ... when the playhead is still FCP only ever displays the Upper Field in the Canvas +unless the canvas is set to 100%+. I once filed it as a bug but I am assured that this is how FCP was designed to work therefore it is not a bug. Go figure. If you add the Deinterlace Filter and tell it to remove the Upper Field you'll still see the upper field when the playhead is paused in the timeline, although It does correctly remove the Upper Field during playback and when rendered. The only workaround I'm aware of is to set the zoom level of the canvas window to 100%, at which point both fields are visible, and any field based effects are properly displayed.
-
Backward- Forward and Forward- Backward
Hi, all!
Can you explainfor me about +Backward- Forward and Forward- Backward+ in General Setting-> Inventory tab-> Planning.
I don'nt understand it, can you make clealy
Thank you!Hi....
Consumption Method there are two available methods of forecast consumption
by the Sales Order:
Backward- Forward In this method, the Sales Order first goes
backwards to 'consume' the forecast which is closest to the Due Date of
the order and continues to the first day of the range if required (as
defined in Days Backward field below),
After that, if no forecast is found (or the forecast, which was consumed,
was insufficient) the Sales Order goes from the Order's due date and
forward (see an example below).
Forward- Backward - In this case the sales order goes forward to
'consume' the forecast which is closest to the Due Date of the order and
continues up to the last day of the range if needed (as defined in Days
Forward field below). After that, if no forecast is found (or the forecast,
which was consumed, was insufficient) goes from the Order's due date
and backward.
Days Backward - Defines the maximum number of days for the Sales Order to go
backwards in order to 'consume' the forecast.
Days Forward - Defines the maximum number of days for the Sales Order to go
forward in order to 'consume' the forecast.
If you are not yet understand you can search in SAP Portal a note that related to that.
Or if you want, you can send me your email address and i will send you the PDF file about MRP.
It has complete explanation for you to know.
Regards,
Lina Yuanita -
Forward / backward consumption Logic ( Macro) in DP Planning book
Hi ,
i need to have Forward / backward consumption Logic ( Macro) in DP Planning book .
For example- say i have keyfigure - A , B. Kefigure B need to consume the value of keyfigure A ( forward/ backwrd) in DP planning book .
Is there any std MACROfunctionality to do this?
If NO. how we can write macro for this requirement ?
Regrds
RajeshHi Aparna & desai,
Macro function - DEMAND_CALC( ACT_PRODUCT ; ACT_LOCATION ; ACT_VERSION ; ) will work only when we manintain product master with version and if we work in that same planning version. means every time it will go and refer product master setttings of 1) strategy 2) forward consumption days 3) backward consumtion days. So its more usful in SNP planning book.
But i am working in DP planning book and version which i am working is not involved in product master. so i hope this function will not work.
Is there any otherway to achive this with time series keyfigure . what logic i can use for macro?
Regrads
Rajesh -
Magic mouse forward backward swiping does not work from time to time
Hello...
from time to time the forward/backward swiping functionality of my magic mouse does not work (The scrolling works though). Disconnecting and reconnecting does not do the trick. So I guess it might be a software problem. Restarting the iMac does not always help at once. After a couple of times it will work though again.
Can anyone help?
Regards
Bjoernyour answer should be here.
http://discussions.apple.com/thread.jspa?threadID=2211072&start=0&tstart=0 -
How do i do a forward and reverse sweep two independent variables
Hi,
So I was looking through the post on how to do a forward and reverse sweep with a real-time x-y plot. I have a similar situation except that instead of sweeping (forward and reverse) of one variable, but instead two variables (in my case, I call it gate voltage G-S Volt and source-drain voltage S-D Volt). I understand how to do it with one variable as provided in previous posts, but I am caught when I add another variable to reverse sweep. I have attached my vi to this post. Any suggesstions is greatly appreciated. Thank you. Also, a little more details on my plot, I am plotting current vs gate voltage which forward and reverse sweepeing (gate and source-drain voltage)..
Attachments:
FET_Isd - Vg measurement_Vg_201.vi 45 KBjasonct,
It is very difficult to follow what your code is doing. It violates all of the style guide and good practice recommendation for LabVIEW code.
The diagram should fit on one screen. SubVIs can help. Generally dataflow eliminates the need for sequence structures. Stacked sequence structures in particular obscure the code. Local variables are prone to race conditions, violate dataflow, and are not needed for the uses you are making of them. Wiring should go right to left, with minimal numbers of bends. Comments documenting what you are doing are helpful to others looking at your code and to you next month when you wonder why you did it that way.
Lynn -
Asymmetric NAT rules matched for forward and reverse flows - NAT Issue
Having a problem with a VPN site trying to communicate to a subnet off my ASA 5505. The network is simple, VPN IPSEC remote site is 192.168.6.0/24 and I can ping and access hosts on 192.168.10.0/24 (called InfraNet). I am now trying to allow communications between 192.168.6.0/24 (called FD_net) to 192.168.9.0/24 (called Inside)
The Error:
5 Nov 12 2012 13:52:50 192.168.9.19 Asymmetric NAT rules matched for forward and reverse flows; Connection for icmp src outside:192.168.6.11 dst inside:192.168.9.19 (type 8, code 0) denied due to NAT reverse path failure
I understand this is a NAT issue; but I not seeing the error and could use a second set of eyes. Here's my current running configuration.
: Saved
ASA Version 8.3(2)
hostname fw1
domain-name xxxxxxxx.xxx
enable password <removed>
passwd <removed>
names
interface Vlan1
description Town Internal Network
nameif inside
security-level 100
ip address 192.168.9.1 255.255.255.0
interface Vlan2
description Public Internet
nameif outside
security-level 0
ip address 173.xxx.xxx.xxx 255.255.255.248
interface Vlan3
description DMZ (CaTV)
nameif dmz
security-level 50
ip address 192.168.2.1 255.255.255.0
interface Vlan10
description Infrastructure Network
nameif InfraNet
security-level 100
ip address 192.168.10.1 255.255.255.0
interface Vlan13
description Guest Wireless
nameif Wireless-Guest
security-level 25
ip address 192.168.1.1 255.255.255.0
interface Vlan23
nameif StateNet
security-level 75
ip address 10.63.198.2 255.255.255.0
interface Vlan33
description Police Subnet
shutdown
nameif PDNet
security-level 90
ip address 192.168.0.1 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport trunk allowed vlan 1,5,10,13
switchport trunk native vlan 1
switchport mode trunk
speed 100
duplex full
interface Ethernet0/2
switchport access vlan 3
interface Ethernet0/3
interface Ethernet0/4
switchport trunk allowed vlan 1,10,13
switchport trunk native vlan 1
switchport mode trunk
interface Ethernet0/5
switchport access vlan 23
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport trunk allowed vlan 1
switchport trunk native vlan 1
switchport mode trunk
shutdown
banner exec Access Restricted to Personnel Only
banner login Access Restricted to Personnel Only
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
dns server-group DefaultDNS
domain-name xxxxxxx.xxx
same-security-traffic permit inter-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object service IMAPoverSSL
service tcp destination eq 993
description IMAP over SSL
object service POPoverSSL
service tcp destination eq 995
description POP3 over SSL
object service SMTPwTLS
service tcp destination eq 465
description SMTP with TLS
object network obj-192.168.9.20
host 192.168.9.20
object network obj-claggett-https
host 192.168.9.20
object network obj-claggett-imap4
host 192.168.9.20
object network obj-claggett-pop3
host 192.168.9.20
object network obj-claggett-smtp
host 192.168.9.20
object network obj-claggett-imapoverssl
host 192.168.9.20
object network obj-claggett-popoverssl
host 192.168.9.20
object network obj-claggett-smtpwTLS
host 192.168.9.20
object network obj-192.168.9.120
host 192.168.9.120
object network obj-192.168.9.119
host 192.168.9.119
object network obj-192.168.9.121
host 192.168.9.121
object network obj-wirelessnet
subnet 192.168.1.0 255.255.255.0
object network WirelessClients
subnet 192.168.1.0 255.255.255.0
object network obj-dmznetwork
subnet 192.168.2.0 255.255.255.0
object network FD_Firewall
host 74.94.142.229
object network FD_Net
subnet 192.168.6.0 255.255.255.0
object network NETWORK_OBJ_192.168.10.0_24
subnet 192.168.10.0 255.255.255.0
object network obj-TownHallNet
subnet 192.168.9.0 255.255.255.0
object network obj_InfraNet
subnet 192.168.10.0 255.255.255.0
object-group service EmailServices
description Normal Email/Exchange Services
service-object object IMAPoverSSL
service-object object POPoverSSL
service-object object SMTPwTLS
service-object tcp destination eq https
service-object tcp destination eq imap4
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_1
service-object object IMAPoverSSL
service-object object POPoverSSL
service-object object SMTPwTLS
service-object tcp destination eq pop3
service-object tcp destination eq https
service-object tcp destination eq smtp
object-group service DM_INLINE_SERVICE_2
service-object object IMAPoverSSL
service-object object POPoverSSL
service-object object SMTPwTLS
service-object tcp destination eq https
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group network obj_clerkpc
description Clerk's PCs
network-object object obj-192.168.9.119
network-object object obj-192.168.9.120
network-object object obj-192.168.9.121
object-group network TownHall_Nets
network-object 192.168.10.0 255.255.255.0
network-object object obj-TownHallNet
object-group network DM_INLINE_NETWORK_1
network-object 192.168.10.0 255.255.255.0
network-object 192.168.9.0 255.255.255.0
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_2 any interface outside
access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 any host 192.168.9.20
access-list StateNet_access_in extended permit ip object-group obj_clerkpc any
access-list outside_2_cryptomap extended permit ip object-group DM_INLINE_NETWORK_1 object FD_Net
pager lines 24
logging enable
logging asdm debugging
logging mail errors
logging from-address hostmaster@xxxxxxxxx
logging recipient-address john@xxxxxxxxx level errors
mtu inside 1500
mtu outside 1500
mtu dmz 1500
mtu Wireless-Guest 1500
mtu StateNet 1500
mtu InfraNet 1500
mtu PDNet 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-635.bin
no asdm history enable
arp timeout 14400
nat (InfraNet,outside) source static TownHall_Nets TownHall_Nets destination static FD_Net FD_Net
nat (inside,outside) source static TownHall_Nets TownHall_Nets destination static FD_Net FD_Net
object network obj_any
nat (inside,outside) static interface
object network obj-claggett-https
nat (inside,outside) static interface service tcp https https
object network obj-claggett-imap4
nat (inside,outside) static interface service tcp imap4 imap4
object network obj-claggett-pop3
nat (inside,outside) static interface service tcp pop3 pop3
object network obj-claggett-smtp
nat (inside,outside) static interface service tcp smtp smtp
object network obj-claggett-imapoverssl
nat (inside,outside) static interface service tcp 993 993
object network obj-claggett-popoverssl
nat (inside,outside) static interface service tcp 995 995
object network obj-claggett-smtpwTLS
nat (inside,outside) static interface service tcp 465 465
object network obj-192.168.9.120
nat (inside,StateNet) static 10.63.198.12
object network obj-192.168.9.119
nat (any,StateNet) static 10.63.198.10
object network obj-192.168.9.121
nat (any,StateNet) static 10.63.198.11
object network obj-wirelessnet
nat (Wireless-Guest,outside) static interface
object network obj-dmznetwork
nat (any,outside) static interface
object network obj_InfraNet
nat (InfraNet,outside) static interface
access-group outside_access_in in interface outside
access-group StateNet_access_in in interface StateNet
route outside 0.0.0.0 0.0.0.0 173.166.117.190 1
route StateNet 10.0.0.0 255.0.0.0 10.63.198.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable 5443
http 192.168.9.0 255.255.255.0 inside
http 74.xxx.xxx.xxx 255.255.255.255 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 2 match address outside_2_cryptomap
crypto map outside_map 2 set pfs
crypto map outside_map 2 set peer 173.xxx.xxx.xxx
crypto map outside_map 2 set transform-set ESP-3DES-SHA
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.9.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.9.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd dns 208.67.222.222 208.67.220.220
dhcpd lease 10800
dhcpd auto_config outside
dhcpd address 192.168.2.100-192.168.2.254 dmz
dhcpd dns 8.8.8.8 8.8.4.4 interface dmz
dhcpd enable dmz
dhcpd address 192.168.1.100-192.168.1.254 Wireless-Guest
dhcpd enable Wireless-Guest
threat-detection basic-threat
threat-detection statistics host number-of-rate 2
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server 63.240.161.99 source outside prefer
ntp server 207.171.30.106 source outside prefer
ntp server 70.86.250.6 source outside prefer
webvpn
group-policy FDIPSECTunnel internal
group-policy FDIPSECTunnel attributes
vpn-idle-timeout none
vpn-tunnel-protocol IPSec l2tp-ipsec
username support password <removed> privilege 15
tunnel-group 173.xxx.xxx.xxx type ipsec-l2l
tunnel-group 173.xxx.xxx.xxx general-attributes
default-group-policy FDIPSECTunnel
tunnel-group 173.xxx.xxx.xxx ipsec-attributes
pre-shared-key *****
smtp-server 192.168.9.20
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:e4dc3cef0de15123f11439822880a2c7
: end
Any ideas would be appreciated.
JohnI don't see any inspection-commands in your config. Is there a reason for not using any of them?
If your problem is only with ICMP, then you should enable at least icmp-inspection. You can do that easiely with the legacy command " fixup protocol icmp"
Sent from Cisco Technical Support iPad App -
Hi,
I have an ASA5510 running version 8.2(5). I have set up a new network on interface Ethernet0/1.777 of the fwl. The firewall works perfectly with remote access VPNs but has now given me the error with the new network that has been set up:
%ASA-5-305013: Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src outside:10.159.159.3/49204 dst tru777:10.1.34.19/3389 denied due to NAT reverse path failure
The difference between the other networks and the new one that I have set up is that this is the first one using a private addressing scheme. I understand that NAT is not allowing something along the way but I cant figure out what needs to change in order to get it to work. My config is as follows:
interface Ethernet0/1.777
description TRU 777
vlan 777
nameif tru777
security-level 50
ip address 10.1.34.17 255.255.255.240 standby 10.1.34.18
access-list acl_tru777 remark * ALLOW ALL OUTBOUND *
access-list acl_tru777 extended permit ip any any
access-list RA-VPN extended permit ip 10.1.34.16 255.255.255.240 10.159.159.0 255.255.255.0
access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 10.0.0.0 255.0.0.0
access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 172.16.0.0 255.240.0.0
access-list acl_no-nat extended permit ip 10.1.34.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list acl_ra-lock-tru777 extended permit ip 10.1.34.16 255.255.255.240 10.159.159.0 255.255.255.0
access-list acl_ra-lock-tru777 extended permit ip 10.159.159.0 255.255.255.0 10.1.34.16 255.255.255.240
ip local pool ra-pool 10.159.159.0-10.159.159.254 mask 255.255.255.0
nat (tru777) 4 access-list acl_no-nat
nat (tru777) 2 10.1.34.16 255.255.255.240
global (outside) 2 x.x.x.x
crypto isakmp nat-traversal 20
I think that is everything you should need, if not please just ask.
Thank you very much in advance,
ChrisHi Julio,
Here you go:
FWL01# sh nameif
Interface Name Security
Ethernet0/0 outside 0
Ethernet0/1 CLIENTS 50
Ethernet0/1.314 tru01 50
Ethernet0/1.313 dmz01 50
Ethernet0/1.316 tru02 50
Ethernet0/1.776 dmz776 50
Ethernet0/1.777 tru777 50
Management0/0 management 100
FWL01# sh run nat
nat (tru02) 1 192.168.3.0 255.255.255.240
nat (tru777) 4 access-list acl_no-nat
nat (tru777) 2 10.1.34.16 255.255.255.240
FWL01# sh run glob
global (outside) 1 interface
global (outside) 2 x.x.x.x
Thanks,
Chris -
Keystroke for going forward/ backwards?
Is there a Keystroke for going forward/ backwards?
Press the Command and left arrow key to go to the previous page, or the right arrow for the next page.
(49581)
Maybe you are looking for
-
How can I display char if a variable is null
Hi All, How can I display char if a variable is null in sap business object item name Office Visits Non-Emergency ED Utilization Non-Preferred Pharmacy above items are value and they are populating for this month but form next month "Inpatient Stays
-
How do I create on-line PDFs which will read them to visually impared customers?
I have seen a handful of unanswered questions about getting Adobe Reader to read aloud, on-line or downloaded PDF content to people who are visually impaired. None of them seem to answer the questions about Acrobat X.1 or backward compatibility. Befo
-
I installed the Business Objects explorer, I'm trying to make the settings required to use this feature but I can not. The procedure was realized the following: I downloaded the file in service.sap.com / swdc 'SAP BusinessObjects XI 3.1 SP1 WINDOWS E
-
Kuler panel availability in CS5.5 French editions?
Hi there, Do you know if Kuler panel will be available within Photoshop CS5.5, French editions? For now, panel is not delivered (see Kuler Panel page from Photoshop CS5 online help), and that's really annoying. Thanks for you feedback, el' ~
-
Beehive Installation Failed - BeehiveServer20100
I am trying to install Oracle Beehive mail server on a 32-bit RHEL 5 box with 4GB RAM and 200GB HDD. The database is installed in a separate windos XP box with 3GB RAM. There is no firewall between the two, and the two machines can pretty much talk w