Work around for audio and music?

What are schools doing as a work around to no being able to sync music and audibooks when using Configurator? We have permission to put our Read 180 books on the iPods and they are being managed by configurator. Has anyone done this yet?

I don't think slideshows (or the iPhoto library itself) is backwards compatible with earlier versions of iPhoto, but I'm not sure. If that's a concern, exporting the slideshow as a QuickTime movie might be the best option, but that's getting off the subject of the thread, so if you have further questions about that, you might want to take it up in the iPhoto forum where people more familiar with iPhoto will be able to help.
Regards.

Similar Messages

Work around for iSync and k800i calendars

Hi all,
I am using OS X 10.4.9 and iSync 2.4. On my Mac, I have to use Entourage to be able to use the email server here, so I sync my Entourage calendar with iCal by having 1 calendar in iCal called Entourage.
I have just bought a new SE k800i and when I first tried to sync, the contacts worked fine, however no calendars went across. I made sure the right calendar, in fact the only calendar, was selected in the iSync preferences but no joy.
I have no events that repeat further than June,so I'm not sure if that's the issue. Does anyone know of any work arounds for this?
Also, what's the best way to Sync, would it be via bluetooth or can I do it via USB?
Thanks for any advice.

I don't think slideshows (or the iPhoto library itself) is backwards compatible with earlier versions of iPhoto, but I'm not sure. If that's a concern, exporting the slideshow as a QuickTime movie might be the best option, but that's getting off the subject of the thread, so if you have further questions about that, you might want to take it up in the iPhoto forum where people more familiar with iPhoto will be able to help.
Regards.

PP CC and OS 10.9.3 work around for crashing and rendering

A very nice guy named Anand at customer service walked me through it. I have had 35 crashes today and that has been building for days, it really got on my nerves. Deadlines and client pressure but Anand stuck with me.
First take care of Disk permissions
Second boot up secure then Go>Go to ~/Library/Caches and delete all files. Do not secure delete trash, some files are needed and you will just say continue.
Then and this is the big one know one else has told me is go to File in Premier Pro then Project Settings then General and change Rendering to Software Only. I have a 12 Core new Mac Pro since Jan and have been running CPU Acceleration (Open CL) since then but I guess the new OS 10.9.3 will not work with that.
So I have to say a big I AM SORRY TO ADOBE!! since it was not them but Apple and the firmware for the graphics card.
Well at least now I am back working and making money.
Thank you Anand you deserve a raise

Frustrating is not the word but I would get kicked off here if I used the right words. How about Adobe gives us back all the money that we pay in while this is happening. I have lost $1,000's of dollars and one client. And are we getting answers. Big corporate is not really caring about the small guy.
I have to not use warp stabilizer because you can't, I can not have dissolves or any transitions overlap which makes a lot of my editing not possible, and that is why I lost a client.
10-15-20 hard crashes a day and another 10-15 where I have to force quit. The hard crashes I have to stop the Mac Pro, go in restart, then trash preferences, then clear cache. Now do that 100 times a week and see how frustrating you get.
Come on Adobe, talk to us and please fix the problem. I had a video editor from a major university ask if they should go PP CC and I said, NO, stick with FCP.

After i upgrade to a new phone, will my old 4s still continue to work on wifi for apps and music? or do I need phone service?

after i upgrade to a new phone, will my old 4s continue to work on wifi for apps and music only? to be used like an ipod?

The support article referenced says to insert the SIM Card from my new phone in the old phone. That won't work since I have an iPhone 5 and the iPhone 4S uses a different size SIM card.
What do I need to do to get past the "Insert a SIM card" message when I don't have the right size card lying around?

Work around for deprecated getIds() and getSession()

Hi All,
As getIds() and getSession() methods of HTTPSessionContext are deprecated I need to know some work around for them. Can anyone please help me out ?
My problem is as follows -
My application has users who can have more than one login till a maximum number. After that maximum number is reached, if same user tries to make another login system will only allow him/her to make it after removing all of his/her previous logins. As a part of that, system should also delete all the sessions associated with those previous logins. Now the methods getIds() and getSession() being deprecated, I don't know how it can be done without going to some persistent data layer (like database).
I'm using WebSphere application server and the solution need to be applicable even for a clustered environment (i.e. I may need to put both of my web tier and application tier in a clustered environment).
Any help will be really appreciated.
Regards,
Sourav

i don't know about handling the multi tier issue but you can easily put an instance into the ServletContext that keeps track of the associations between users and sessions and can react accordingly.
robert

[svn:osmf:] 11238: Cue point sample improvements and added a work around for FM-171 to the TemporalFacet class .

Revision: 11238
Author:   [email protected]
Date:     2009-10-28 12:45:35 -0700 (Wed, 28 Oct 2009)
Log Message:
Cue point sample improvements and added a work around for FM-171 to the TemporalFacet class.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-171
Modified Paths:
    osmf/trunk/apps/samples/framework/CuePointSample/src/CuePointSample.mxml
    osmf/trunk/framework/MediaFramework/org/osmf/metadata/TemporalFacet.as

Revision: 11238
Author:   [email protected]
Date:     2009-10-28 12:45:35 -0700 (Wed, 28 Oct 2009)
Log Message:
Cue point sample improvements and added a work around for FM-171 to the TemporalFacet class.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-171
Modified Paths:
    osmf/trunk/apps/samples/framework/CuePointSample/src/CuePointSample.mxml
    osmf/trunk/framework/MediaFramework/org/osmf/metadata/TemporalFacet.as

Work around for radio tuner service not working

A work around for the lack of radio tuner service that has appearently hit Itunes versions lower than 11.
We all hope that Apple will restore Radio Tuner Service for us legacy products users soon, but I've been thrown under the bus more than once by Apple in the last 25 yrs to put much hope in that (I started with an Apple III w/a Z80 card running C/PM, yeah I'm that old)
Have your iTunes and your favorite browser open.
In your browser go to http://vtuner.com/setupapp/guide/asp/BrowseStations/startpage.asp
This will give you a list of Genre's, etc of streaming internet stations.
When you select a genre you'll get a list of stations that shows station ID, what type of feed codec and data rate.
Select any of the AAC or MP3 feeds.
Select play.
This will send a small download file to your computer containing the selected feeds URL.
Your computer will ask what app to use to open the file, select iTunes.
This will automatically open a file called Internet Songs at the end of Playlists in iTunes (if you don't already have one), and will install the URL there.
All the stations you selected will now be permanently stored in Internet Songs.
Viola, your very own custom personal internet radio playlist!
GT
Dual Core 2Ghz G5, 9.22/10.4.11/10.5.8

Apperently iTunes 11 is not affected (Apple stil makes iTunes11 for the 14 yr old Microsoft XP OS, but not for anything PPCs can run. Go figure)
"Next door" to Steve was metaphoric, he lived in Los Altos, about 15 miles away, but he cast a big shadow!
On 9.2.1/10.4.11 differences, some time in the past someone selected 'save file' and checked the box 'don't ask again' on your computers dialog box. That's why you're not given a choice wih the file downloads. I would think that selection should be able to be reversed.
iTunes 9.2.1/OS10.4.11 puts those downloaded URLs into the Music Libary of iTunes, no matter if it's opened directly, or you click on the file on your desktop. You can create a new playlist, highlight the selection in the Music Libary, and drag it to your new playlist to keep alll the steaming URLs together. NOTE, this only creates an alias, the URL copied by iTunes must remain in the Music Libary. You can then delete the the files on the desktop, if you want. I did multiple stations this way in 9.2.1, they all show in either the new playlist created, or in the Music Libary, and remain after the desktop files are deleted and trash emptied.
You can switch sations by double clicking them. Another note, all the URLs were all from vtune.
I hope this helps.
PS, I forgot how clunky Tiger is compared to Leopard...

Work around for iTunes not working with shuttle

Well, I have found a work around for the iTunes not working the the Shuttle. It is not pretty, and many of you may not choose to follow my lead. This procedure has a lot of dumb steps in it, but in the end, one can copy data/songs to a Shuttle.
It involves removing the current iTunes and replacing it with a version that also had a bug in it.( I told you it ain't pretty).
Procedure:
1. Go to this url: http://www.apple.com/downloads/macosx/apple/ipod_itunes/itunes802forwindows.html
2. Download the old 8.0 version of iTunes for Windows.
3. Remove the current iTunes from your computer. Note after you run the remove utility in Windows, you need to delete the iTune library that isn't removed.
4. Install iTunes 8.0
Here is where it gets dumb.
This version of iTunes has a bug with the USB interface, but there is an easy work around.
5. Make sure the Shuttle is not connected when you launch iTunes.
6. After iTunes comeup, attach the Shuttle.
7. iTunes should see your Shuttle.
8. Select the music you want to upload, and drag it to the Shuttle.
9. iTunes will just sit there, so you need to get its attention. To get its attention you must disconnect and reconnect one of your USB devices, just not the Shuttle. Some folks do their mouse, one used a USB drive, and another on used is GPS because he was working from a laptop and did not have a mouse.
10. In a few moments, iTunes will do its thing and copy your data to the Shuttle. You must do this routine for each copy, so if you develop a Play List, you only have to do step 9 once.
The getting the old copy of iTunes was my idea, but a gentleman from a year ago figured out the mouse step.
I am now a happy camper, my Shuttle is full of music again.
However, I hope Apple finds a fix for the 8.2 problem soon.
Take care all.

I stand corrected on the name. By the time I figured out how to copy the songs I had a few other names in mind.
One of the first things I tried was the Reset utility. After the iTunes restore did not work, I went looking for something else. After using the utility, I connected the iPod and resynced. I had left the Autofill box checked. iTunes autofilled the iPod. I deleted those songs and tried to put a different play list in. It would not copy the songs, iTunes said there was no room even though the play list for the shuffle was empty. I looked at the settings screen and it said the iPod was full. I synced the iPod to my Mac, and that got rid of the "full" indication. That is when I started looking for an older version of iTunes, unfortunately all I could find is a version with the USB bug.

Is there a work around for my Akai Pro EIE Pro interface to work with mountain lion

Does anyone have a work around for the Akai EIE Pro Audio interface that just stopped working after the mountain lion upgrade. Akai has no response currently.

Yep,
They say they're working on it.
It ***** though
effo

Got error message with web based application that it would only work on MS Explorer 6.0 or newer. Any work around for this?

When accessing a web based program I got a message that it could only be accessed using MS Explorer 6.0 or newer. Is there a work around for this?

There is a way to do this.
But it works or not, I have no idea.
Enable "Develop menu".
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click the Develop menu and select "User Agent"
There are choices. Do not forget to make Safari default again afterwards.

Work Around For Numbers Crashing

Work Around For Numbers Users:
For those of us who have numbers and have had problems with it crashing when scrolling across sheets that have checkboxes try this: Double select a cell, and use the expanding group to navigate the sheet. It seems to be stable when doing this.
3 weeks after the os8 release and still no fix for this? Pathetic.

If anyone has been having trouble with upgrading the domain file and iWeb crashes, here is the fix that worked for me:
http://discussions.apple.com/message.jspa?messageID=5100025#5100025
*MAKE SURE YOU BACKUP YOUR DOMAIN FILES FIRST!*

Work around for User ID 32 character limitation in CCX Agent?

Are there any kind of creative work arounds for getting past the ridiculous 32 character limit when logging into the CCX Agent?
We are moving toward using the User Principal Name (UPN) in CUCM LDAP which means that the domain is now tacked onto the end of their existing User IDs. We are doing this so that users from multiple domains can authenticate to various Cisco tools and apps. It works very well, except when firing up the Agent!
I've already been playing around with UPN suffixes, and while I can get them to show up in CUCM (and subsequently), I can't seem to get them to authenticate.
I shouldn't even have to get this creative, just remove the 32 character limit, Cisco!
We are running CCX 8.5 and CUCM 8.6

Hi ,
I am not aware about any such workarounds.
After referring to the below guide,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851ag.pdf
On page 78, it is mentioned as,
Caution : When logging into Cisco Agent Desktop, agents use the Unified CM user ID and password. While the Unified CM limits agent IDs to 128 alphanumeric characters, the Unified CCX limits agent IDs to 31 alphanumeric characters. Be sure to abide by the 31 character-limit when configuring agents in Unified CM.
I am sure even if it works by some workarounds also, you may see some issues specially from the CAD\CSD\CDA side, which Cisco will not support it quoting the same above reason.
Hope it helps,
Anand
Please Rate helpful posts !!

Work around for 60 column limitation

All,
Does anyone know of a work around for the 60 column table limitation?
Will this be changed in a future release?
Thank you.

I also need a workaround for this. I have users that want to download data as excel files, and the built in export to csv was working great until the dynamic sql statement pushed itself to more then 60 columns. Is there some other way to provide a link to the data as csv? Can I hook into the csv functionality of HTML DB? Can I create a page template that modifies the Content-Disposition and/or Content-Type so the browser thinks the page is csv/excel so that I could dump out a clob of data I put together? Should I just have a button that provides a link to something outside HTML DB to query and dump data from the database?
As it is, the users really don't need to see the data on the screen. I just need a way to dump 60+ columns of data to the user as csv.

Work around for Excel's array formulae?

I have an Excel spreadsheet which I have built over many years to manage maintenance tasks of my boat. I would like to convert this to run on Numbers. Unfortunately I can't find a work-around for Excel's "Array Formulas".
The column headers of my spreadsheet contain maintenance tasks (plus data on how frequently by days or engine hours these jobs need to done). When I complete a maintenance task, I log the date and engine hours in a new row with an "x" to signify that the job is done. Excel then looks up the date/engine hours when each job was last done (ie the lowest "x") and then uses conditional formatting to highlight the column headers of which jobs are overdue. Is there a work around for this in Numbers?
I attach an image shot of my Excel spreadsheet which may help:

Hi Rich,
Some made-up dates.
If you have multiple x's in a column, change all but the most recent to "Done" or something other than x This approach looks for the date in Column A that matches a single x in a task column.
This example works on years. I hope you change your oil and filter more often .
One Header Row and four Footer Rows. Enter Years between services (D9) from the keyboard.
To find the date of the last service (the only x in Column D)
D10 contains this formula:
=INDEX($A,MATCH("x",D,0))
You can Fill Right to other columns.
"Years since" (D11) contains this formula:
=YEAR(TODAY())-YEAR(D10)
"Alert" (D12) contains this formula:
=IF(D11>D9,"Hey, You!", "OK")
Conditional Formatting in D12 sets the text to red if it equals "Hey, You!"
It would be best to combine these steps into one complex formula. Numbers is slowed down with each Header or Footer in a Table.
Regards,
Ian.

Work around for Excel "Array Formula" in Numbers?

I have an Excel spreadsheet which I have built over many years to manage maintenance tasks of my boat. I would like to convert this to run on Numbers. Unfortunately I can't find a work-around for Excel's "Array Formulas".
The column headers of my spreadsheet contain maintenance tasks (plus data on how frequently by days or engine hours these jobs need to done). When I complete a maintenance task, I log the date and engine hours in a new row with an "x" to signify that the job is done. Excel then looks up the date/engine hours when each job was last done (ie the lowest "x") and then uses conditional formatting to highlight the column headers of which jobs are overdue. Is there a work around for this in Numbers?

It not clear from your post, but I get the impression you are inquiring about Numbers for OSX. This is the iOS iWork forum. You may want to repost here: https://discussions.apple.com/community/iwork/numbers
If I'm wrong, and you are asking about Numbers for iOS, these links may help: http://help.apple.com/numbers/ipad/2.2/#/tan5ca02385
http://help.apple.com/functions/mac/5.0/
But Numbers for iOS does not fully support conditional text.

Work around for audio and music?

Similar Messages

Maybe you are looking for