Work center reporting

Hi,
In our system in transaction OP4A lot of ‘Shift definations’, ‘shift sequences’ are maintained unnecessary. We want to clean this data (Remove unwanted).
Is there any report available for work center like 'where used' function to identify shift pattern, sequences used in system so that I can remove other data.
Regards,

Hi Caetano,
Thank you for your help, as you suggested I can check 'Shift Sequence' at table level.
Still the problem is we have to remove unnecessary shifts defined in system and it is possible to assign defined shifts to work center intervals directly means without giving 'Shift sequence' as input.
Is there any table available where I can get the 'Shifts' assigned to work centers?
Regards,

Similar Messages

  • Standard PP work center reports in ECC or BI

    Hi All,
    I am new to PP so need your help urgently.
    Do we have standard PP workcenter reports available?  Can anyone please share the link for the same?
    Thanks!

    Dear,
    Production report daily/monthly- MCPM
    Order anlysis - COOIS
    Work center capacity - CM01/CM02
    Path SAP menu -->Logistics --->Production --> Shop Floor Control -->Information System Our use T code SAP1.
    Please check queries available in PP module for BI
    http://help.sap.com/saphelp_nw70/helpdata/en/a1/2d708759fc49ec90f309888b0bdb48/frameset.htm
    Regards,
    R.Brahmankar

  • Work center report

    Hello every one,
    I am looking for a report which can tell me on the basis of work center that how many employees are deployed on that. For further clearance client want a report in which they can see at any given point of time that on a particular work center how many workers are deployed. Kindly help me in this.
    Regards
    Abhishek

    Hi chandrasekhar,
    Which standard report i can use for this purpose. With abap query also i m not getting how to get how many ppl deployed on work center currently. How we can get this...... Kindly help me in this.
    Regards
    Abhshek

  • Reports-Work Center

    Hi,
    Please suggest relevant Work center reports that can be used in SAP HR other than S_AHR_61016514 - Existing Work Centers
    Please Help.
    Regards,
    Ghanapriya

    Hi,
    kindly find the below reports for Work Centre:-
    S_AHR_61016515 - Work Centers per Organizational Unit
    S_AHR_61016516 - Authorities and Resources
    S_AHR_61016517 - Planned Labor Costs
    S_AHR_61016518 - Work Centers with Restrictions Along Organizational Structure
    S_AHR_61016519 - Single Work Centers with Restrictions
    S_AHR_61016520 - Work Centers Requiring Health Examinations Along Org.Structure
    S_AHR_61016521 - Single Work Centers Requiring Health Examinations
    Thanks and Regards
    Kiran

  • Work center wise production order infomation report

    Hi all,
    i have a requirement that workcenter wise (with date) production order information with quantity details (plan and actual).
    Eg: My production order quantity - 40 nos. (it takes 4 days to finish).
          i have three operation in production order.
          my order scheduled start date - todays date.
    In standard, when enter my first operation work center, system showing production order and its quantity (40 nos) . but i need to split that order quantity in report.. means on todays date for particular production order - order quantity = 10 nos.
    Clent want like that (with quantity break) report..
    Any standard report ???
    If customization.... How it can be mapped in SAP.??
    Thanks in advance

    Hi,
    You can use the FM COIS_SELECT_ORDER_DATA_READ.
    CALL FUNCTION 'COIS_SELECT_ORDER_DATA_READ'
          EXPORTING
            iv_prod_order_sel       = lv_prod_order_sel
            iv_proc_order_sel       = lv_proc_order_sel
            iv_planned_order_sel    = lv_planned_order_sel
            iv_rem_objects_only_sel = lv_rem_objects_only_sel
            is_objects_to_read      = ls_objects_to_read
            it_parameter            = lt_parameter  "General Structure for PARAMETERS and SELECT-OPTIONS
            it_status_hdr           = lt_status_hdr
            it_status_opr           = lt_status_opr
            it_status_cmp           = lt_status_cmp
          TABLES
            ct_ioheader             = lt_ioheader
            ct_ioitem               = lt_ioitem
            ct_iodocl               = lt_iodocl
            ct_ioopdocl             = lt_ioopdocl
            ct_iomamo               = lt_iomamo
            ct_ioconf               = lt_ioconf
            ct_ioopconf             = lt_ioopconf
            ct_iosoconf             = lt_iosoconf
            ct_iogomo               = lt_iogomo
            ct_ioopgomo             = lt_ioopgomo
            ct_iosogomo             = lt_iosogomo
            ct_iogmer               = lt_iogmer
            ct_ioopgmer             = lt_ioopgmer
            ct_iosogmer             = lt_iosogmer
            ct_iosequen             = lt_iosequen
            ct_iooper               = lt_iooper
            ct_iosoper              = lt_iosoper
            ct_ioopcomp             = lt_ioopcomp
            ct_iooppreq             = lt_iooppreq
            ct_iosopreq             = lt_iosopreq
            ct_iooppord             = lt_iooppord
            ct_iosopord             = lt_iosopord
            ct_ioopmst              = lt_ioopmst
            ct_ioopprt              = lt_ioopprt
            ct_ioopcap              = lt_ioopcap
            ct_ioopscap             = lt_ioopscap
            ct_iosocap              = lt_iosocap
            ct_iososcap             = lt_iososcap
            ct_ioopsccf             = lt_ioopsccf
            ct_iososccf             = lt_iososccf
            ct_ioprodlist           = lt_ioprodlist
            ct_iomatver             = lt_iomatver.
    This FM get data from the report used by transaction COOIS. If you needed the header data then you can use lt_ioheader table and seperate the data with the date. If you need at operation basis the you can use lt_iosoper table. You can use this FM to create custom report even with the checks like material availability, PRT availability, capacity requirement etc.
    Thanks and regards,
    Pradip
    Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
    Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
    Edited by: Pradip Ray on Aug 26, 2009 8:26 AM
    Edited by: Pradip Ray on Aug 26, 2009 8:27 AM

  • In the report level user wants two persons against each work center.

    Hi Experts,
    Please let me know the solution, I have provided scenario below.
    check the query which the user is referring to report:
    Example
    Work center     Person
    KNE33102     44003850
    According to the user, the names for the Work centers should be as follows:
    Work center          Person
    KNE33102         44003850,
    KNE33102        44003603
    I have check the data in T-code-CR03, each work center getting two persons, as can be shown below.
    Work center        Person
    KNE33102           44003850,
    KNE33102           44003603
    In RSA3 it can be seen that both the records are being extracted
    Work center     Start date     End date     Person
    KNE33102     09.02.2009     31.12.2009     44003850
    KNE33102     09.02.2009     31.12.2009     44003603
    In BI , when checking in PSA, it can be seen that the data is also being loaded to BI (Two persons loaded against Work center-KNE33102)
    Work center     Start date     End date     Person
    KNE33102     09.02.2009     31.12.2009     44003850
    KNE33102     09.02.2009     31.12.2009     44003603
    But when loading to the Info Object, one person has deleted. Because of this, in the report level displaying one person.
    Note:-Please let me know what is the procedure, in the report level user wants two persons against each work center.

    Hi,
    As you said in your post the data has mentioned up to 2009. can you try execute the query till to date .
    Regards
    sivaraju

  • How to find the reporting for work center machine wise

    hi gurus
    My question is . In one work center machine capacity category 2 machines are used. Client is asking the report machine wise. i.e as 2 machines are available .What is the capacity utilisation for each machine.Provide me the information for this. Thanks in advance
    kalyan

    Hi Kalyan
    you have to make some settings in production order & work center first.
    In work center capacity header ,you have to make indiovidual capacities as 2.
    In the same capacity header screen by going through the menu Goto--->individual capacitities  define these different individual machines.
    In the production order operation detail screen goto " capacity reqmt assignment " assign the quantities for different work centers.
    Adfter this in the confirmation CO11N you have to fill the split field accordingly& confirm different wortk centers seoperatley.
    Then you can the report in the CO14 for diferent work centers.
    you try this.
    Regards
    YMREDDY

  • Production performance report against work center.

    Hi PP Gurus,
    There is a requirement to develop a production line (work center) performance report in BI which is comprising of Planned setup time, Actual setup time and their variance against a production plant and work center. Input parameters will be Material, Plant, Work center, Date/Week/Month. The scenario is PP Discrete Manufacturing.
    Could anyone please tell me how to fetch data from different tables and how to interlink them?
    Thanks & Regards,
    Abu Arbab

    Hi Brijesh,
    Thanks for reply
    As I told in my first post that I need tables,fields/infostructure that should contain Planned setup time, Actual setup time. I got some infostructure like S022, S024, S281, S282, but I'm not getting exact link between one of them related to input criteria.
    If anybody worked on such requirement please reply
    Thanks & Regards,
    Abu Arbab

  • How to add SAP BI or BEx Reports on Reports Work center link in WEB UI

    Hello All,
    I have question, How to add SAP BI Reports on Reports Work center link in WEB UI? I found an article on SDN but could not understand. Please provide all steps in detail.
    Thanks,
    BMW

    Hi BMW325ci (I hope you have the latest model )
    Here are the steps:
    1. have the BI team create a webversion of the report. (not required when calling a query directly
    2. create in SPRO --> CRM --> UI Framework --> UI Framework Definition --> Display SAP NetWeaver BI Reports in CRM the reports you want to display
         e.g. BI Report ID         Z_DYBE_GROSS_SALES_CUST_MAT
                Long description              Revenue per customer/materialgroup
                BI Object Type                  HT Template 3.x  (depending on your BI version)
                BI Object Key                 ZWCOPALM01_PPS_REVENUE_ARTG_V2
                BI System                      (when using the webtemplate, nothing needs to be filled)
    3. create in SPRO --> CRM --> UI Framework --> Technical Role Definition --> Define Navigation Bar Profile
        a. A logical link for each BI report.
           e.g. Logical Link ID ZDB-ACC-DE
                  Type    D BI report
                  Target ID       DISPLAY
                  Parameter       Z_DYBE_GROSS_SALES_CUST_MAT
                  Parameter Class CL_CRM_GEN_UI_BI_UTIL
                  Icon Name       GC_ICON_REPORTS
                  Title           Revenue per customer/mater.
                  Description     Revenue per customer/materialgroup
       b. Include in the relevant Report Work Center Link the logical links you have created in step 3.a
          e.g. Group ID        SLS-ACC-RE
                 LogLinkID ZDB-ACC-DE position 80
       c. Make sure that your work center link is assigned to the work center
          e.g. Work Center ID  SLS-REPORT
                 GroupID  SLS-ACC-RE position 10
       d. Make sure that your work center is assigned to your navigation bar profile
    at this moment the report is linked to a standard workcenter, which can be shown on the webui.
    4. In your business role, you need to of course make sure that the flags on the workcenter entries are set on show in menu and directly.
    This should give you the complete picture.
    KR,
    Micha

  • Attendance Report based on Work Center

    Hi All,
    Do we have a standard report of getting the attendances/Abscences of an employee based on Work center.
    Either if it can be done by CATS also is fine.
    Kindly suggest.
    Thanks

    Hi,
    You can run the program RPTABS20 and in the further selection field u can add the org unit for your work cente.
    Regards,
    Kapil Kaushal

  • Work center-Machine wise report

    Hi Guys,
    I have a work center for ex CNC in which i have taken 3 machines,in capacities i define the individual capacity for each machine & iam also able to split the capacity amoung the machines,Now if i want to take a report to give to the work center supervisor -list of the operations that i have loaded in the work center,<b>is there any standard report available where i can even get the detail of the load in the machines of particular work center?</b> otherwise pls give me some workaround

    Hi vijay,
    what u need is, day or weekly wise  prodution load for each machine .. am i correct?
    u need a report containing details about  what are all materials to be produced and its all operations for  each machine.
    In that case  u have to develop some customized Zreport.
    regards
    pradeep

  • Report for work center hours , maintenance order wise for SAP 3.1i version.

    Hi Team,
    We are using older version of SAP, that is SAP 3.1i. Here we don't have any transaction code such as IW47. Is there any other way to get report of work center and work center hours-order wise.
    Please respond.
    Regards,
    Kiran

    Have a look at table AFRU
    PeteA

  • Assign a report to a work center

    Dear Experts,
    I would like to add a report view to my custom work center. Do you know why this error message appeared? What is the condition for a work center to be used for report assignment?
    Many thanks in advance
    Cheers
    Linh Hoang

    Hello Linh,
    I would suggest you the following, in order to be able to assign a report to a Work Center View you need to create stable anchors for your WoC view in the UI Designer.
    The ReportAssignment-Anchor can be added via UI designer. Plus, the work center view subtype should be "Application".
    For even more details, you might refer to help description:  Developer Desktop => Analytics => Business and Technical Background => Defining Analytics Content
    I hope it helps
    Cheers
    Tales Caron
    Support Engineer

  • REPORTS FOR WORK CENTER EFICIENCY

    Hi All,
    I´m trying to find reports that shows work center eficiency. Anyone knows any standard report like this?
    Regards,
    Felipe Tavares

    Dear
    If you are looking for Work Centre Effiency report , then you should check the Utilisation of Work Centre in production in every months or you can compare the production actual and planned by work centre to know the effiency .
    Some of the standrd txn :
    1.MCPQ
    2.MCP7
    Customised report : http://www.onestopsap.com/sap-PM/compare.asp or with the following SAP Table :
    WERKS         LIKE  AUFK-WERKS,                     "Plant
          AUFNR    LIKE  AFKO-AUFNR,              "Prod. Order No.
          PLNBEZ   LIKE  AFKO-PLNBEZ,             "Header Material No.
          GSTRI      LIKE  AFKO-GSTRI,              "Actual Start Date
          GLTRI      LIKE  AFKO-GLTRI,              "Actual Finish Date
          GAMNG    LIKE  AFKO-GAMNG,             "Prod. Order Qty.
          AUFPL      LIKE  AFKO-AUFPL,              "Planned No. Of Operation
          AUART    LIKE  AUFK-AUART,              "Order Type
          BUKRS    LIKE  AUFK-BUKRS,              "Company Code
          OBJNR    LIKE  AUFK-OBJNR,              "Object No. For Order Status
          KDAUF    LIKE  AUFK-KDAUF,              "Sales Order No.
          KDPOS    LIKE  AUFK-KDPOS,              "Sales Order Status
          IDAT2      LIKE  AUFK-IDAT2,              "Order Completion Date
           ISM01   LIKE  AFRU-ISM01,              "Required Qty.
          VGW01    LIKE  AFVV-VGW01,              "Quantity Withdrawn
          VGE01    LIKE  AFVV-VGE01,              "Unit Of Measure
          EFFPERC  LIKE  AFVV-VGW01,              "Eficiency %age
          MAKTX    LIKE  MAKT-MAKTX,              "Material Descriptio
    Try and come back
    Regards
    JH

  • How do I create a new Work Center for the transaction launcher and links

    Hi
    The requirement here is for me to find out if I can create a new Work Center that will contain up to 6 assignment blocks and each block having either links to websites and BW reports, or triggers to R/3 applications via the transaction launcher.
    Can I do this purely through customising or do I need to create a new view using BSPs? If I can do it through customising please could I have a few pointers to what component I would need to use/copy?
    Regards
    Declan

    Hi Robert,
    Thanks again for taking the time to reply.
    Just so I understand, if I want to show a work center I need to link it to a component / view? I think this was the original query - do I need a developer to create the view that contains the 6 blocks with their links to reports, transactions and websites? I think when I talk about blocks I mean 1 viewset containing 6 views. There is no SAP standard view that would suit my requirements is there? Even if the work center had 8 views, I can always hide the two views in configuration.
    After the developer has created the view, I then reference that component in the target Id in the define logical links section of my work center.
    If my understanding is right, then it follows that it is not possible to create a user specific work center without some development.
    Is this correct?
    Cheers
    Declan

Maybe you are looking for

  • Mistakenly changed ownership/permissions to No Access on external Lacie.

    I thought I was making no access for other Users on my G5. However, after speaking with Lacie I have instructed my OS to not allow any access. I tried the following from Kappy I saw on an almost identical post: To fix this: 1. Launch Terminal, which

  • Converting XML doc to TreeNode object

    Hi, I am trying to build a Tree in Workshop 8.1 using netui:tree tag (for data in an XML file). The BEA docs say that we have to assign the TreeNode object to the 'tree' attribute in the netui:tree tag. What is the best way to translate the XML doc i

  • Service contract - Billing block

    Dear Guru's              i am doing  the service contract with standard document type  WV.But my client requirment is,he wants to block the individual line item wise in VA41 and Release in VA42 by individual line item and do billing in VF01.         

  • My safari won't let me shut down my computer and it also won't quit out of safari!

    Im trying to exit out of safari but it keeps on making a noise and won't let me close out of it or minimize. Also when I try to shut my computer down it says to quit out of safari before but it won't let me. It lets me quit out of everything else but

  • Stock transport order ("Q" stock, configuration) - cross-company code

    We tried to create stock transport order (cross-company code) and consequents documents with using "Q" stock and material configuration. Unfortunately we have got 1) message M7 146 concerning the special Q stock not supported by the movement 643., 2)