Work centre wise total running time and production

Hello,
I have a requirement to show total running hours for work centres and total production quantity produced by work centres.
Is there any cube for this in PP?
Please respond.
Best Regards,
AI

Well cube 0pp_c04 provides work centre wise GR quantity. The key field is 0GR_QTY. But i need workcentre (machine) hours used to produce the material.
Got it?

Similar Messages

  • Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on sam

    Attempting to install Forms 6.0.5.0.2 (or 6.0.8.8.0) run-time and 8.1.6 client on same NT box.
    1) I attempted to install 8.1.6 client first in c:\oracle\ora81, then Forms 6 in c:\oracle\forms6. The installer (3.3.1.2.4) errors, saying forms 6 does not support a multi-home installation.
    2) Attmpted to install Forms 6 first in c:\orant. Then installed 8.1.6 client in c:\oracle\ora81. After beginning installation (application user) the following Dependency message displays and the installation is canceled: "Installation cannot continue for the follwoing reason(s). [Oracle ODBC Driver is a single Oracle home product. It is already installed in location c:\oracle\ora81. Oracle provider for OLE DB is a single oracle home product. It is already installed in location c:\oracle\ora81. Oracle objects for OLE is a .... Pracle Provider for OLE is a single home ... You can either de-install these products or install the products in the same location as the single home products."
    Click ok and the installation cancels.
    How do I install these two products on the same box?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

    We had to upgrade from 7.3.2 to 7.3.4 when we moved over to Forms
    6.0.5.0.2 and it's working fine.
    We are using Net 8 as well.
    Finn Ellebaek Nielsen (ChangeGroup ApS) (guest) wrote:
    : I have problems with Forms 6.0.5.0.2 running against an Oracle
    : 7.3.4 with Net8. When trying to insert or update records I get
    : an FRM-40508: ORACLE error: unable to INSERT record/FRM-40509:
    : ORACLE error: unable to UPDATE record. The Help | Display Error
    : menu item shows statement = "S3AVWU3wo|$6o|" (garbled
    : message), error = "ORA-12663: Services required by client not
    : available on the server" (sometimes it's "ORA-01403: no data
    : found").
    : It works fine against 8.0.5. As far as I'm aware Forms 6 is
    : certified against 7.3.4?
    : Any clues?
    : Thanks for your help.
    : Finn
    null

  • Total run time query

    Hi Gurus,
    I need to find out what is the total run time of a query in production. I browsed RSDDSTAT table in se11 but I don't know what is the name of the column to find out total run time.  Is it qruntimecategory ? Please advice .
    Thanks
    Liza

    Hi Liza,
    Goto ST03N transaction and select the expert mode and under BW system load you can check for the query you want. Here it gives the detailed view of the query. But to do this, the statistics for the cubes should have been enabled. for that, goto RSA1, tools-> BW statistics for the infoprovider and select your infoprovider and save. then run the query and you will see the result in ST03N.
    Sriram

  • Custom Installer with Inno Setup (reduce size of Run-Time and VISA RT)

    Hi,
    we are using Inno Setup to install our Application. Up to now i include the full LabView 2009 SP1 Run-Time and the full VISA-RT
    (that are 302 MB). I have also made an installer using the internal tools of LV and the setup is only 163 MB. The LV removes
    some parts of the RunTime libraries.
    We are using only these parts:
    p0 MetaUninstaller\
    p1 VC2005MSMs\
    p10 NI-RPC\
    p11 XercesDelayLoad27\
    p12 NI-ORB\
    p13 NI-DIM\
    p14 NI_TraceEngine\
    p15 NI-PAL\
    p16 NI_Logos_XT\
    p17 TDMS\
    p18 MDFSupport\
    p19 MKL_900\
    p2 VC2008MSMs\
    p20 NI_Logos\
    p21 RT\
    p3 NI_Certificates\
    p4 NI-VISA_Runtime\
    p5 LabVIEW_RT_NBFIFO_90\
    p6 Service_Locator\
    p7 LabVIEW_Web_Server_RTE_90\
    p8 LabVIEW_WebServices_RTE_90\
    p9 mDNS_Responder\
    1. Is it allows to do that also using Inno Setup? I mean, am I allowd to do that? The license from
    NI etc. are all included. I want to save disc space...
    2. Is that wise? If not, why?
    Thanks

    Hello sjunge,
    basically there should be no problem installing the software with Inno Setup as long as you do not violate the License Agreements.
    But keep in mind that there could be dependencies between the installers you install and those you don't and you may run into trouble with the software later on
    Kind regards
    Carsten

  • Total Run Time of Captivate 4 Project

    I know it has to be here somewhere . . . but, where does Captivate show you the total run time of a completed projected?  I have put together about a dozen slides with animation and narration, and I'm trying to find out how long the whole thing will take to run/view by users.
    Thanks.
    Jean

    Hi again
    That's correct. If you have created a project from scratch, everything is zero until you publish. Then it populates.
    At least that's always been my experience with it.
    Cheers... Rick
    Click here for Adobe Certified Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Work Centre wise Wastage Report

    Dear All,
    Kindly let me know if there is a standard/zreport available on net, that provides work centre wise wastage in plant.
    Regards,
    Alok.

    There are some standard reports for Work centers available like -
    MCPQ - Work Center Analysis Quantities
    MCPH - Work Center Analysis Dates
    MCPY - Work Center Analysis Lead Times
    CM01 - Work Center Analysis Load
    CM05 - Work Center Analysis Over Load
    There are many more reports.
    Hope this helps you.

  • How to know last run time and who ran the query

    Hi
    I am doing the analysis for all the queries , their last run time and who ran the query
    Since there are almost 6000 queries , is there any way to find out last run time and who ran the query
    in one step or through any transaction else It would huge effort taking task to check the data in BW statistics
    table for each query
    Regards,
    Vivek

    Hi,
    Statistics should be switched ON for all the queries first. You can check this in RSDDSTAT.
    Statistics data is stored in BW for a specific period only. This setting can be maintained in table RSADMIN (Field : TCT_KEEP_OLAP_DM_DATA_N_DAYS). If the value for the field is 30, then 30 days old statistics will be available at any point.
    Not all the queries will be ran daily. Some are ran daily, monthly and yearly depending upon User requirement.
    1. You can check in RSDDSTAT_OLAP for the details you needed.
    2. You can install the BI Technical Content and run the respective query for the details you needed.
    Hope this helps.
    Regards,
    Sunil

  • How to measure query run time and mnitor performance

    Hai All,
                   A simple question. How to measure query run time and mnitor performance? I want to see the parameters like how long it took to execute, how much space it took etc.
    Thank you.

    hi,
    some ways
    1. use transaction st03, expert mode.
    2. tables rsddstat*
    3. install bw statistics (technical content)
    there are docs on this, also bi knowledge performance center.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
    BW Performance Tuning Knowledge Center - SAP Developer Network (SDN)
    Business Intelligence Performance Tuning [original link is broken]
    also take a look
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/31b6b490-0201-0010-e4b6-a1523327025e
    Prakash's weblog on this topic..
    /people/prakash.darji/blog/2006/01/27/query-creation-checklist
    /people/prakash.darji/blog/2006/01/26/query-optimization
    oss note
    557870 'FAQ BW Query Performance'
    and 567746 'Composite note BW 3.x performance Query and Web'.

  • HT1725 Dowon loads from store never work.... wasted time and money

    Dowon loads from store never work.... wasted time and money

    Thanks for reading and thanks for the advice. Perhaps I'll ask them about it next time this problem occurs, although carrying the thing through a mall that is only about a mile away is the least of my worries. I'll do if it is both free (I don't make enough at my job to pay for such a service) and relatively speedy, although I'd hate for them to come over and for the computer to work properly (as bad as that sounds). It'd be a wasted trip and nothing would get fixed.
    I'm contemplating videotaping myself performing my "fixes" on it the next time I have this problem.

  • DSC 8.6.1 run-time and LV2009 executable are they working together ?

    Hi All,
    In my application  I first deploy shared variables and when they all have depleoyed the main application starts. My deployment procedure is something like that:
    0. Select first library
    1. check if  library is already running on SVE
    2. if not deploy it
    3. check next library
    Most of my variables in libraries are connected to OPC variables. OPC server is located in other computer and there is a LAN network between computers. I have noticed that when I execute my application exe only few of libraries are deployed to SVE. Eg. If I remove all processes(libraries) from SVE and start my application only 7/28 libraries are deployded. If I deploy those libraries manually from LV2009 project everything is okay. 
    On my computer is installed LV2009 development and DSC 8.6.1 run-time. Our target is remove LV2009 immediately after we have edited and tested  all our variables and libraries. Is there a potential risk that application which is made on LV2009 don't work with DSC run-time 8.6.1?  Have anyone else noticed problem when deploying variables from application exe? 
    BR, Jim 

    Meg K. B. , 
    It sounds like you are experiencing Time Stamp Counter (TSC) Drift as mentioned in the KB's for the AMD Multi-Core processors. However, according to this wikipedia article on TSC's, the Intel Core 2 Duo's "time-stamp counter increments at a constant rate.......Constant TSC behavior ensures that the duration of each clock tick is
    uniform and supports the use of the TSC as a wall clock timer even if
    the processor core changes frequency." This seems to suggest that it would be not be the case that you are seeing the issue mentioned in the KBs.
    Can you provide the exact modle of the Core 2 Duo processor that you are using?
    Ben Sisney
    FlexRIO V&V Engineer
    National Instruments

  • I have a C6380, The printer works with my laptop running Vista and MacBook but not Windows 7. Why??

    I have had my C6380 for quite a while, now.  I have a personal laptop running Vista and have no problems.  I have a MacBook for work that I use with the printer with no problems.  I also have a desktop that was working well for a long time with this printer and for the last number of months (I haven't counted), I have been having a lot of problems. 
    Either the computer cannot find the driver or the computer delivers a message that the printer is off line (even though it works with the other computers).  I use the C6380 via a home wireless network.
    Reinstalling the HP Software helps for a short time, but the problem soon recurs.
    I cannot seem to find anything in any of the Trouble shooting guides on HP or MS websites.  HELP!

    If it works on one Firefox 3.6.10 installation, it should work on the other - assuming both PC's have exactly the same version of Norton installed, including that Firefox Toolbar extension. Another possibility is that Norton uses a different version of their software on WinXP than they use on Vista.
    Tools > Addons > Extensions - does the Norton Toolbar show as being incompatible?
    You could try forcing a Norton program update to see if their Firefox extension gets updated.

  • Pick a subject area at run time and create an analysis on this subject area.

    We have a requirement wherein we need to create analyses at run time. We want to give the flexibility to users to pick up a subject area on which they wish to create an analysis. This will be done through a dashboard prompt. Once the user picks up a subject area from the prompt, we will create the analyses at run time based on the selected subject area.
    The problem that we are facing at this point is how to create a dynamic 'FROM' clause for the analysis. As an example, consider the following scenario:
    1. There is a dashboard prompt called 'Select a DataStore'. The possible values are all the subject areas in the RPD. For simplicity, lets assume there are two values DS1 and DS2.
    2. If the user selects DS1, the analysis sql should be:
    select <colgroup1>, <colgroup2>
    from DS1;
    However, if the user selects DS2, the analysis sql should be:
    select <colgroup1>, <colgroup2>
    from DS2;
    Hence the requirement for a dynamic FROM clause.
    I tried using a presentation variable in the from clause but I get the sql syntax error.
    Is there a way of implementing this requirement?

    To work around the license issue, see the Microsoft Knowledge Base article LICREQST.EXE Requesting a License Key from an Object and download licreqst.exe. Run licreqst.exe and find "CWUIControlsLib.CWSlide.1" under the registered controls section and click on it. The license string at the top can be passed to Licenses.Add and then you should be able to dynamically create the Measurement Studio controls. For example:
    Private Sub Form_Load()
    Licenses.Add "CWUIControlsLib.CWSlide.1", "[Add license string from licreqst here]"
    Dim slide
    Set slide = Controls.Add("CWUIControlsLib.CWSlide.1", "slide")
    With slide
    .Top = 120
    .Width = 1215
    .Visible = True
    End With
    End Sub
    Creating controls like this would have an impact on performance since all calls are late bound. If you are using the Measurement Studio controls in a UserControl, though, you should not need to do this since the license would get compiled into the binary that contains the control. I don't think that you would have any problems creating your control since it would not be licensed.
    - Elton

  • Executable not working - Looking for LabVIEW Run-Time Engine

    This has been one of those days.
    I'm trying to create my .exe file to place onto another computer. I've done this before with success. But that was then and this is now.
    I believe I have all the files I need in my LLB, and I believe I did my application distribution correctly and I believe I built the DLL correctly. But when I took the resulting .exe file and placed it on another computer and attempted to run it, it gave me the error message: "Unable to locate LabVIEW Run-Time Engine. Program requires a version 7.1 (or compatible) LabVIEW Run-Time engine. You should have already realized this, you moron."
    Anyone have any idea where I went wrong or what step I might have missed? This has been a crazy, non-stop, massive brain fart of a day and I can't seem to remember what I'm missing here.
    Amateur programmer for over 10 years!

    Hi.
    Whenever you want to use executables or .dll's created with LabVIEW you must make sure that the LabVIEW runtime engine of the SAME version as the LabVIEW version used to create the files, is installed in the target computer.
    There are basically 2 ways to get the run-time engine installed on a computer:
    1. (the one I prefer): Download the correct version of the LabVIEW run-time engine installer from www.ni.com/downloads, or more specifically from
    http://digital.ni.com/softlib.nsf/websearch/369618​104E25B08E86256F54006A4E2F?opendocument&node=13205​0_US
    for the latest one. Once you have the installer for the run-time engine, just install it in the target computer. I prefer this option because the run-time engine is installed independently, so if you then uninstall your program, the run-time engine remains.
    2. Create an installer for your program that includes the run-time engine. To include the run-time engine, when you are creating your application, go to the "installer settings" tab, click on "Advanced" and make sure there is a checkmark on "include LabVIEW run-time engine". This way when you install your program in the target computer, the run-time engine will also be installed.
    Just as a note, any computer with LabVIEW on it, will also have the run-time engine.
    Good luck.
    Alejandro

  • Is there a way to install exe of a vi on an XP machine without LV run-time and not have to restart?

    Hi,
    I need to deploy an application that reads channels from a FP module for testing purposes. The problem is, I cannot restart the system I need to install this on because it is running critical control software which cannot be interrupted. The system does not have the labview run-time engine and I know installing this requires a restart of XP probably due to registering DLLs or something.
    I'm using "Fieldpoint Network Read" to read from the module. The simple answer would be to simply install this on a machine on the same network that I can restart. However, I have no such luxury because I am connecting to the system in question over a long distance VPN connection and I need to be able to poll the data from the FP every 250ms which may be too much for the connection. 
    So basically, I need to find a way to read data from this FP in a manner similar to "FP Network Read" without restarting the system.  Is there any way to do this with labview? Alternatively, I may be able to write this app using LabWindows since I know some software is already running on that machine programmed with that.
    Solved!
    Go to Solution.

    The first thing I'd say is that a restart may not be necessary.  I have in the past installed LabVIEW development environment and when asked I said I would restart later.  Then I opened LabVIEW and started coding.  I'm not sure what it thinks it needs to restart for but it may not be required.
    The other thing I'd like to mention is that LabVIEW 7.1 and older can run EXEs without needing to install a run time engine.  So it is possible to build a EXE in 7.1, then include some files and DLLs in the same directory as the EXE, and when it is ran it will use them.  There's probably issues with talking to DAQ devices without MAX and I have no idea how you address this but it is another possibility.
    Of course you already know the best answer and that is to reboot the system when most convenient.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Open second form at run-time (and transfer variables)

    Hi,
    i'm searching for a method to open a second (maybe attached) form from an existing form at run-time.
    The goal would be to have a button in a form which runs a function as click event that opens the second form and transfer field values from the existing form to the new opened form.
    To new form should opened in a separate Adobe Reader window because the user should have the possibility to save or print the both forms separately.
    Regards

    Hi,
    check this solution.
    http://blogs.adobe.com/formfeed/2010/07/shared_data_in_packages_part_2.html

Maybe you are looking for