\work directory not found

Hi there,
We r running Windows 2003 with ERP 6.0. I had to move the instance folder from drive R: to drive C:, so I changed the Windows Service to point to the new drive and changed the entries in registry I could find, plus made changes in the SAP instance profiles. But now that I want to start up the service, it fails with an error in the Windows Event Viewer: "Unable to change to diretory R:\usr\sap\.......\work". Obviously, the work folder now sits under C:, but I couldn't find anywhere in the registry or profiles a pointer to this folder. Does anyone know how to change something to point to the new path for the work folder?

Hi,
Try to check profile parameter DIR_HOME in RZ10.
Regards,
Olivier

Similar Messages

  • Breadcumbs don't work online: '404 - File or directory not found'

    Breadcrumbs all work fine when testing my AirHelp application offline on my Windows 7 pc, (or if I access it as online browser based help). However, when I try to test the online Airhelp most of the breadcrumbs return a '404 - File or directory not found' error.
    My RoboHelp Project has been created as follows:
    1. There is a homepage created inside of RoboHelp
    2. Then I have linked a number of framemaker books, for each of which the FM table of contents is being converted to create a new associated TOC.
    3. In the master TOC I have added a New TOC Book for each framemaker book (making it a book with a link to a htm), under the New TOC Book I have inserted a TOC placeholder for the appropriate associated TOC.
    When the Online AirHelp version is run, the breadcrumbs can only be used to navigate to the homepage and to the New TOC Books at the level immediately beneath the home page. The links to these pages seem to make sense, being of the form:
    Breadcrumb
    Link
    Home
    event:homepage.htm
    Home/User Guide
    event:../../../User_Guide.htm
    Where it goes wrong is for the breadcrumbs futher down the path which have links similar to those shown below:
    Breadcrumb
    Link
    Home/User Guide/Introduction
    event:introduction.htm
    Home/Handbook/Sign_Conventions
    event:Sign_Conventions.htm
    In both of the above the URL request that is being passed to the online server is not the full path, (it seems to be a relative path?) Is this the reason why the breadcrumbs don't work, and if so can you suggest what I need to do to get them working?
    I am up against a deadline, and at the moment the only way forward I have is to abandon the converted Framemaker TOCs and have RoboHelp autocreate a TOC for the whole project for me, however this is not a practical solution because the folder structure is not the same when I do this and would require a great deal of manual editing each time it is rebuilt.
    Hoping somebody out there can please assist?
    Thanks.

    Thanks TP,
    I have many public IP's available. Do I need to install the RD Web access role on the DMZ server that has the RD Gateway role even if i have spare public IP's available? 
    I've basically have this setup "3.1. RD Gateway without AD DS in perimeter network deployment:"
    On the below link
    http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
    currently there's an CNAME record in DNS for remote.external.com which points to Server3.internal.pri
    which holds the RD
    Connection Broker, RD Licensing and RD Web Access roles
    Are you saying to create an A record and point it to Server3.internal.pri
    internal IP? I'm not getting certificate errors (yet) so do i have to run the script? i ask this as the error message i'm getting (404 - File or directory not found) doesn't seem to be related to certificates, i'm making changes to a production environment
    so i have to be extra carefull!
    Cheers!

  • Can anyone answer why in logic pro X I keep getting a window popping up that says Directory not found, result code= -120, followed by another window saying, Fade update failed, (error -120)?

    Can anyone answer, why in Logic Pro X I keep on getting a window popping up saying, Directory not found, result code = -120. Followed by another window saying, Fade update failed, (error -120)?
    I am running the latest version 10.0.5 through a Macbook Pro that has just been upgraded to 16GB Ram and a 960GB SSD which has made it as fast as ****. I upgraded because I was experiencing problems before and it was suggested that I didn't have enough Ram?
    I am using a Focusrite scarlett 2i4 and an Alesis Q61 midi controller. Weirdly, just trying to put a bass line down on a track using the Alesis, the bass sound goes out of tune with the track during recording only. This is very frustrating! I surely can't be the only one experiencing this?
    Many thanks
    Rob.

    Hi
    Time lost could be a problem, but.....
    Sadly, I don't think that there are any Apple docs relating to networked storgae issues with Logic. Other than a 'school' or 'business' setup, NAS/OD/AD setups are not usual circumstances for audio.
    If the issue is one of data backup & security, it may be enough to automatically backup the students local work folders to the NAS.
    If the issue is one of the Users being able to work from any Mac and pick up their files from the server, you are not likely to resolve this problem, without copying the files to the Local Mac.
    CCT

  • LSO Content Player  Error - HTTP Error 404 - File or directory not found

    Hi All
    Please could you assist.
    I have published a course to my ISS CMS and configured the links in both ECC and J2EE lsm/mediator.
    Result
    Username='username', SystemName='HRD', Client='030', Host='22.22.22.22', Language='EN', SystemNumber='00', EnablePoolSharing='true', MaxConnection=50, AbapDebug=false:
    CPCFG.RSURL = http://iiscmshost.domain/LSO600/Content/
    CPCFG.REPUS = username
    ServerURL=http://iiscmshost.domain/LSO600/Content/  ok!
    I was able to successfully publish the course from the Authoring Environment to the CMS server.
    When selecting the starting the course from the portal with content player i get the following error.
    HTTP Error 404 - File or directory not found
    But the URL is referring to - http://iiscmshost.domain/lms/mediator/courseview?sid=8685627505550088697845288091101&language=EN&sys=HRD&client=030&sap-accessibility=X
    How does directory http://iiscmshost.domain/lms/mediator get created when the content is in http://iiscmshost.domain/LSO600/Content ??
    Secondly can I change this reference to my LSO600/Content directory.
    Please advise with any information. Point will be awarded.
    Regards
    Maahir

    Dear Maahir,
    We are facing the same problem. We are pointing over CMS to IIS, instead of KM content of portal. We are successfully able to release and publish the course, then attach to a course participant also.
    But. When participants logs into the portal and click on Start Now. It giving 404 file not found Error. Its the same error. All our Course and content pointed to CMS IIS Server Url.
    When we did the content player config test, result is NOT OK. We have required R3 authorization and CMS user authorization also with admin rights. Content Player console is working in AE when we start up the course. Its showing the error.
    So, it seems like content player is not working properly. Bcoz we are launching course from  http://WEBDAV repository server maintained in back end system. Which is the IIS(CMS Server)for us. Do we need to maintain anything separately to launch a course from IIS Server on R3 and SAP Portal. Below sample URL from page.
    http://Sever:port/lms/mediator/courseview = xxxxxxxxxxxxxxx
    Could you please us know, how did you resolve the issue and tell me the cause of this issue.
    Thanks and Regards
    Obli

  • Ftp error: directory not found

    Am getting the following error from the Filezilla server:
    +...+
    +(000066)11/1/2010 23:39:54 PM - (not logged in) (127.0.0.1)> Connected, sending welcome message...+
    +(000066)11/1/2010 23:39:54 PM - (not logged in) (127.0.0.1)> 220-FileZilla Server version 0.9.37 beta+
    +(000066)11/1/2010 23:39:54 PM - (not logged in) (127.0.0.1)> 220-written by Tim Kosse ([email protected])+
    +(000066)11/1/2010 23:39:54 PM - (not logged in) (127.0.0.1)> 220 Please visit http://sourceforge.net/projects/filezilla/+
    +(000066)11/1/2010 23:39:54 PM - (not logged in) (127.0.0.1)> USER ftpuser+
    +(000066)11/1/2010 23:39:54 PM - (not logged in) (127.0.0.1)> 331 Password required for ftpuser+
    +(000066)11/1/2010 23:39:54 PM - (not logged in) (127.0.0.1)> PASS ******+
    +(000066)11/1/2010 23:39:54 PM - ftpuser (127.0.0.1)> 230 Logged on+
    +(000066)11/1/2010 23:39:54 PM - ftpuser (127.0.0.1)> PWD+
    +(000066)11/1/2010 23:39:54 PM - ftpuser (127.0.0.1)> 257 "/" is current directory.+
    +(000066)11/1/2010 23:39:54 PM - ftpuser (127.0.0.1)> PWD+
    +(000066)11/1/2010 23:39:54 PM - ftpuser (127.0.0.1)> 257 "/" is current directory.+
    +(000066)11/1/2010 23:39:54 PM - ftpuser (127.0.0.1)> CWD /D:\tmp+
    +(000066)11/1/2010 23:39:54 PM - ftpuser (127.0.0.1)> 550 CWD failed. "/D:/tmp": directory not found.+
    +...+
    Created a File Read adapter (opaque schema) to a mediator to a FTP file ASCII/PUT adapter (opaque schema) used a Physical directory name.
    The folder D:\tmp exists yet the error message says it does not exist.
    Using SOA 11g and JDev 11.1.1.1.0. The FTP server is Filezilla. I also installed the Filezilla client to test the server and all is well.
    The following errors are received in the WLS server:
    Invalid Output Directory.
    The value specified for the output (Physical/Logical)Directory interaction parameter or jca binding property has an invalid value "D:\tmp".
    +".+
    +The invoked JCA adapter raised a resource exception.+
    +Please examine the above error message carefully to determine a resolution.+
    +at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:427)+
    +at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeJcaReference(JCAInteractionInvoker.java:530)+
    +at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeAsyncJcaReference(JCAInteractionInvoker.java:49+
    +4)+
    +at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAEndpointInteraction.performAsynchronousInteraction(JCAEndpointInteractio+
    +n.java:463)+
    +at oracle.integration.platform.blocks.adapter.AdapterReference.post(AdapterReference.java:244)+
    +... 50 more+
    +Caused by: BINDING.JCA-11014+
    +Invalid Output Directory.+
    +Invalid Output Directory.+
    +The value specified for the output (Physical/Logical)Directory interaction parameter or jca binding property has an invalid value "D:\tmp".+
    +Ensure that the following conditions are satisfied for the output directory :+
    +1) It exists and is a directory (not a file). and+
    +2) It is writable (file write permissions). and+
    +3) If using a logical name, then ensure that the mapping from logical name<->physical directory is correctly specified in the deployment descriptor.+
    +at oracle.tip.adapter.ftp.FTPAgent.validateOutputDir(FTPAgent.java:1178)+
    +at oracle.tip.adapter.file.outbound.FileInteraction.validateDirectory(FileInteraction.java:2726)+
    +at oracle.tip.adapter.file.outbound.FileInteraction.executeFileWrite(FileInteraction.java:548)+
    +at oracle.tip.adapter.ftp.outbound.FTPInteraction.execute(FTPInteraction.java:238)+
    +at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:297)+
    +... 54 more+
    +Caused by: BINDING.JCA-11431+
    +Error changing directory in the host.+
    +Error changing directory in the host.+
    +Change working directory to /D:\tmp in the server failed.+
    +Please make sure that the directory exists.+
    +at oracle.tip.adapter.ftp.FTPClient.changeWorkingDirectory(FTPClient.java:1722)+
    +at oracle.tip.adapter.ftp.FTPAgent.validateOutputDir(FTPAgent.java:1173)+
    +... 58 more+
    +Nov 2, 2010 12:00:41 AM oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl log+
    +SEVERE: JCABinding=> FileR FileRAdapter Service FileR was unable to perform delivery of inbound message to the composite default/Project1!1+
    +.0*84c0aec5-77de-4c6a-b977-6bb1ba63dee9 due to: BINDING.JCA-12563+
    +Exception occured when binding was invoked.+
    +Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Invalid Output Director+
    y.
    Invalid Output Directory.
    The value specified for the output (Physical/Logical)Directory interaction parameter or jca binding property has an invalid value "D:\tmp".
    +".+
    +The invoked JCA adapter raised a resource exception.+
    +Please examine the above error message carefully to determine a resolution.+
    *Thanks Casey*
    Edited by: casey on Nov 1, 2010 10:08 PM

    You were correct - the previous error was a Filezilla config issue. That has been corrected and I can, using the Filezilla client get into and browse d:\tmp - no problems.
    Now have another problem that I thought was fixed yesterday - server does not recoginize server username/password - see below and comments below the error message. The username/password is the same as used by the client to connect to the server
    +…+
    +... 10 more+
    Caused by: BINDING.JCA-12563
    Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error in logging in.
    Error in logging in.
    Unable to log in to the server.
    +".+
    +The invoked JCA adapter raised a resource exception.+
    +Please examine the above error message carefully to determine a resolution.+
    +at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:427)+
    +at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeJcaReference(JCAInteractionInvoker.java:530)+
    +at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.invokeAsyncJcaReference(JCAInteractionInvoker.java:49+
    +4)+
    +at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAEndpointInteraction.performAsynchronousInteraction(JCAEndpointInteractio+
    +n.java:463)+
    +at oracle.integration.platform.blocks.adapter.AdapterReference.post(AdapterReference.java:244)+
    +... 52 more+
    +Caused by: BINDING.JCA-11439+
    +Error in logging in.+
    +Error in logging in.+
    +Unable to log in to the server.+
    +Please ensure userid and password specified to login to the server is correct.+
    +at oracle.tip.adapter.ftp.FTPClient.regularLogin(FTPClient.java:1614)+
    +at oracle.tip.adapter.ftp.FTPClient.login(FTPClient.java:1561)+
    +at oracle.tip.adapter.ftp.FTPAgent.login(FTPAgent.java:1094)+
    +at oracle.tip.adapter.ftp.FTPAgent.preCall(FTPAgent.java:1515)+
    +at oracle.tip.adapter.ftp.FTPAgent.validateOutputDir(FTPAgent.java:1154)+
    +at oracle.tip.adapter.file.outbound.FileInteraction.validateDirectory(FileInteraction.java:2726)+
    +at oracle.tip.adapter.file.outbound.FileInteraction.executeFileWrite(FileInteraction.java:548)+
    +at oracle.tip.adapter.ftp.outbound.FTPInteraction.execute(FTPInteraction.java:238)+
    +at oracle.integration.platform.blocks.adapter.fw.jca.cci.JCAInteractionInvoker.executeJcaInteraction(JCAInteractionInvoker.java:297)+
    +... 56 more+
    *The EIS Username/password was configured as per the following:*
    +Outbound Connection Pool: eis/Ftp/FtpAdapter+
    +EIS Type: FTP+
    +WebLogic Server User: weblogic+
    +EIS User Name: ftpuser+
    +EIS User Password: oracle+
    +Confirm Password: oracle+
    *The composite has a file read wired to a mediator which is wired to a FTP ASCII/Put adapter. The file is read - leastwise it disappears from its specified Physical Directory (d:\temp) - but is not 'Putted' to the d:\tmp folder.*
    *Error message from mediator*
    onMessage
    Nov 2, 2010 8:53:13 AMonCase "FTPPut.Put"
    Nov 2, 2010 8:53:13 AMTransformed message part "opaque" using xsl/opaqueElement_To_opaqueElement.xsl"
    Nov 2, 2010 8:53:14 AMError during invoking 1-way operation "Put" on target service "FTPPut"
    Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error in logging in. Error in logging in. Unable to log in to the server. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    The Filezilla output is:
    +(000009)11/2/2010 9:36:59 AM - (not logged in) (127.0.0.1)> Connected, sending welcome message...+
    +(000009)11/2/2010 9:36:59 AM - (not logged in) (127.0.0.1)> 220-FileZilla Server version 0.9.37 beta+
    +(000009)11/2/2010 9:36:59 AM - (not logged in) (127.0.0.1)> 220-written by Tim Kosse ([email protected])+
    +(000009)11/2/2010 9:36:59 AM - (not logged in) (127.0.0.1)> 220 Please visit http://sourceforge.net/projects/filezilla/+
    +(000009)11/2/2010 9:36:59 AM - (not logged in) (127.0.0.1)> USER+
    +(000009)11/2/2010 9:36:59 AM - (not logged in) (127.0.0.1)> 501 Syntax error+
    +(000009)11/2/2010 9:37:38 AM - (not logged in) (127.0.0.1)> disconnected.+

  • RD Gateway - 404 - File or directory not found - Remote Desktop Services 2012 R2 - External users

    Hi All, 
    I’m currently deploying RDS to our network, I’ve installed and configured the RD Gateway role – accessing https://remote.external.com/RDWeb internally works fine but not externally. Externally https://remote.external.com reaches the servers default IIS page
    but once I put /RDWeb I get the error 404 – File or directory not found.
    I’m not sure what’s not configured properly but below is the setup – keep in mind that the internal domain is different to the external FQDN i.e. the server name of the GD Gateway is Server4.internal.pri and the FQDN to access RDS externally is remote.external.com 
    - Server1.internal.pri Internal Network
    RD Session Host
    - Server2.internal.pri Internal Network
    RD Session Host
    - Server3.internal.pri Internal Network
    RD Connection Broker, RD Licensing, RD Web Access
    - Server4.internal.pri DMZ Network
    RD Gateway DMZ IP/ Internal IP
    - Certificate for all servers is a wildcard *.external.com
    In the RDS Deployment Properties
    Deployment Properties> Certificates> all certificates are configured with a wildcard certificate e.g. *.external.com
    Deployment Properties> RD Web Access server= server3.internal.pri URL = https:// server3.internal.pri/RDWeb
    Deployment Properties> RD Gateway> Server name = remote.external.com – I’ve understood that this is the URL (FQDN) to access RDS and not the RD Gateway servername itself
    RD Gateway Manager Properties
    Browse and import certificate> *.external.com
    Transport Settings> IP address for HTTPS = 192.168.x.x (DMZ IP)
    Transport Settings> IP address for UDP = 192.168.x.x (DMZ IP)
    IIS
    Both the RD Gateway and the Connection Broker have https certificate as *.external.com and in the site bindings https is * for ip addresses, specifying the DMZ IP on the RD Gateway doesn’t fix the issue
    DNS, Network, Domain etc..
    remote.external.com points the Public IP in DNS with an A record – Public IP is NATed to the RD Gateways DMZ IP on the firewall – RD Gateway is joined to the domain – RD Gateway has another NIC with an internal IP
    Firewall
    Port 80, 443, 3391 is open from the internet to the RD Gateways DMZ IP, RD Gateway also has an internal IP with full access to the other RDS roles
    Errors I receive with the MS Best Practice Analyzer
    Problem:
    The Remote Desktop Gateway (RD Gateway) server Secure Sockets Layer (SSL) certificate may not have a valid certificate subject name.
    Impact:
    If the RD Gateway server is configured to use an SSL certificate with a certificate subject name that is not valid, users cannot connect to internal network resources (computers) through the RD Gateway server.
    Resolution:
    Use the RD Gateway Manager tool to select a valid SSL certificate for the RD Gateway server to use.
    Even though I did configure this… seems like it might be from the split DNS
    Other 
    I can access RDS from the RD Gateway box https://remote.external.com and client machines
    no certificate errors internally, either externally when I reach the default IIS page of the RD Gateway i.e. https://remote.external.com
    Any help is much appreciated!

    Thanks TP,
    I have many public IP's available. Do I need to install the RD Web access role on the DMZ server that has the RD Gateway role even if i have spare public IP's available? 
    I've basically have this setup "3.1. RD Gateway without AD DS in perimeter network deployment:"
    On the below link
    http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
    currently there's an CNAME record in DNS for remote.external.com which points to Server3.internal.pri
    which holds the RD
    Connection Broker, RD Licensing and RD Web Access roles
    Are you saying to create an A record and point it to Server3.internal.pri
    internal IP? I'm not getting certificate errors (yet) so do i have to run the script? i ask this as the error message i'm getting (404 - File or directory not found) doesn't seem to be related to certificates, i'm making changes to a production environment
    so i have to be extra carefull!
    Cheers!

  • Obant reports ORABPEL-00005 (collaxa library directory not found)

    Hi,
    I´m trying to deploy some tasks using obant and several build.xml´s. I´ve done this for dozen times now, but today I got an error message that says:
    build.xml:42: ORABPEL-00005
    Collaxa-Library-Verzeichnis nicht gefunden.
    Das angegebene BPM-Library-Verzeichnis "lib/" wurde nicht gefunden.
    Here a maybe-translation:
    build.xml:42: ORABPEL-00005
    Collaxa-Library-Directory not found
    The indicated BPM-Library-Directory "lib/" was not found
    Well, the funny thing is, that when I´m running "obant" from command-line everything works fine - but when I´m calling the it from another ant-script it fails. The corresponding line in build.xml points to the bpelc-task:
    <target name="main">
    <bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
    </target>
    I´ve inserted an <echo ... /> to get the values of those variables (basedir/rev/deploy) used and everything seems to be in order. Here´s how I call this build.xml.
    main/build.xml:
         <target name="deployBPELServices">
              <property name="deploy" id="deploy" value="testDomain"/>
              <ant dir="services/all" antfile="build.xml" target="all">
                   <reference refid="deploy"/>
              </ant>
         </target>
    main/services/all/build.xml:
    <property name="deploy" id="deploy" value="default"/>
    <property name="rev" value="1.0"/>
         <target name="BpelProcess1">
              <ant dir="${basedir}/../BpelProcess1/"/>
         </target>     
    <target name="all" depends="BpelProcess1"/>
    main/services/BpelProcess1/build.xml:
    <target name="main">
    <bpelc input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
    </target>
    Usualy I start the deployment by using "obant deployBPELServices", which fails. When I´m using "obant" directly from main/services/all it works flawless.
    Any ideas or suggestions?
    Thnx in advance,
    Max

    Hi Clemens,
    Yes, the sample´s build.xml were my reference on how to set up this whole thing. I did it this the very same procedure for the last year with 26 BPEL-processes and yesterday just added a new process and this happend. Nevertheless, also if I remove the changes made to the main build.xml it doesn´t work (tested on 2 systems). Well at least, obviously this is my fault, not BPEL´s :) Whatever, I succeeed with the following:
    Instead of using
    <target name="deployBPELServices">
    <property name="deploy" id="deploy" value="testDomain"/>
    <ant dir="services/all" antfile="build.xml" target="all">
    <reference refid="deploy"/>
    </ant>
    </target>
    I´m now doing it this way:
    <target name="deployBPELServices">
    <property name="deploy" id="deploy" value="testDomain"/>
    <exec dir="services/all" executable="cmd">
    <arg line="/c ${ORABPEL}/bin/obant.bat -Ddeploy=${deploy}"/>
    </exec>
    </target>
    ${ORABPEL} points to my BPEL installation.
    Thnx anyway :)
    Greetings,
    Max

  • Calling ni845xStatusToString gives: NI-845x: Unable to decipher status code 0xfffb6528 ( errorCode ). Error -1 - Directory not found.

    Hi All,
    I'm trying to get started programming my NI-USB 8451 with the NI USB 845x driver.
    What I am trying to do is simply retrieve some of the error and warning messages from the driver. As instructed in the Hardware and Software manual for the NI USB 845x, I am making a call to
    ni845xStatusToString
    However, for any error code (valid or invalid), I get the following string back from the driver:
    NI-845x:  Unable to decipher status code 0xfffb6528 (<errorCode>). Error -1 - Directory not found.
    where I see the supplied error code in <errorCode> above.
    This makes me think that some type of dictionary or "Directory" that is external to the driver is not available on my system. Is this the case?
    I have the 64-bit driver installed on my machine. This is further consolidated by the fact that all the other functions (ni845x*) work as intended and I am able to communicate with the device.
    Can anyone help me understand why I cannot retrieve the error strings or warnings strings?
    Your response is greatly appreciated.
    Thank you!
    Sincerely,
    Ishrak Khair
    Instrument Control Toolbox
    MathWorks

    That is odd that your application has trouble with it.
    LabVIEW does not but, if you are seeing the error you reference update the driver its in the known issues resolved for 2.1.1
    Are you trying to open the error file from an additional process?  The driver is limited having no "Multi-Process Support"
    Jeff

  • 404 Error - File or Directory not found

    Hi there
    I have a simple CF page set to do a dump of the server only at this stage.
    <cfdump var="#server#">
    It works fine when I'm on the server itself and run from 127.0.0.1/mydomain/index.cfm
    When I try to run from www.mydomain.com - I get a 404 file or directory not found
    Is this a CF error or is this an error being thrown up from IIS
    How do I get around this error ?
    Thanks in advance.
    Kind regards

    Hi Nexusxox,
    In addition, To troubleshoot the winodws updates issue, please follow these methods:
    1.  You should be able to access the Windows Update website. If you can't access this site, try to use the
    Windows Update Troubleshooter to fix the problem.
    Refer to:
    http://support.microsoft.com/kb/2497281#manually
    2.  Recreate SoftwareDistribution folder:
     1) Stop the Automatic Updates and Background Intelligent Transfer Service services.
     2) Delete or rename the %windir%\SoftwareDistribution folder.
     3) Restart Automatic Updates and Background Intelligent Transfer Service services.
    3.  Reset Windows update:
    How do I reset Windows Update components?
    To do so: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added
    protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge
    Base: 322756 (http://support.microsoft.com/kb/322756/)
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Troubleshooting Lync 2010 404 - File or Directory Not Found

    Reading through several posts in this forum about 404 errors, none of the ideas have helped me with this problem
    I have a single Lync 2010 server used for IM, Video and Audio conferencing; no voice. Lync 2010 clients work just fine, getting the Web App to work with an emailed meeting link like https ://meet.mydomain.com/username/C32249V3 displays a web page with 404
    - File or Directory Not Found. Silverlight is installed, no errors in Event Viewer for Lync, iisreset has no affect.
    Open for other ideas to try and places to look at?
    AIS

    Hi, you can check before with a Ps command like
    $cred1 = Get-Credential "litwareinc\kenmyer"
    $cred2 = Get-Credential "litwareinc\pilar"
    Test-CsWebApp -TargetFqdn atl-cs-001.litwareinc.com -UserSipAddress "sip:[email protected]" -UserCredential $cred1 -User2SipAddress "sip:[email protected]" -User2Credential $cred2
    $cred1 = Get-Credential "litwareinc\kenmyer"
    $cred2 = Get-Credential "litwareinc\pilar"
    Test-CsWebApp -TargetFqdn atl-cs-001.litwareinc.com -UserSipAddress "sip:[email protected]" -UserCredential $cred1 -User2SipAddress "sip:[email protected]" -User2Credential $cred2
    TechNet Link
    regards Holger Technical Specialist UC

  • 404 - File or directory not found - HFM WORKSPACE

    Hello All,
    We are seeing the error below when a user logs onto an HFM app.
    *"404 - File or directory not found.*
    *The resource you are looking for might have been removed, had its name changed, or temporarily unavailable."*
    When they click on Administration -> and any menu items, the error goes away and they are able to go to that navigation page.
    Could anyone suggest how to prevent this from happening?
    Thanks in advance,
    Regards,
    SM

    Ok.
    Things to check:
    #1 - If it is a default startup item from workspace, you can go to the preferences menu item and change that. (File --> Preferences --> General --> Default Startup Options)
    #2 - If the default item is in the reports explorer, check preferences as well. (File --> Preferences --> Explore --> Default Folder
    #3 - If none of that works, you can try clearing out the user preferences for the user by looking at the HFM database. Go to the following table : <app name>_USERPARAMS and pull all records that match the username (DB field = username) in question.  You can remove those rows from the table and it will reset that user's preferences.  I THINK HsvSystemInfo_LastContentSrc points to the last item they were using and deleting that might be sufficient, but I haven't had to do this in a while so I cannot say for sure.....

  • 404 - File Or Directory Not Found Upon Intersection Check Report Display

    In FDM 11.1.2.1, when there are intersection check errors, instead of the intersection check report automatically opening in a new tab, I get a "File Download" message box with Open and Save buttons. If I choose Open, I get the "404 - File or directory not found" error. If I choose Save and save the file to a local path, I never get the option to open the file and the "Processing. Please wait..." message runs forever.
    FDM is running on virtual Windows Server 2008 R2 64-bit, IIS 7, Excel 2007, with SQL Server 2008 R2 64-bit and IE 7 web client.

    Tony, thanks, I'd like to give your work around a shot. We've tried all of Oracle's recommendations with no luck. I have temporarily unhidden my e-mail address in my user profile. Please let me know if you need anything else.

  • 404 -File or directory not found error

    We have had several users report the following error message that appears inside the Rich Text Editor that is used for Instructions on the Process Steps of Formulation specs, in 6.1.0.1.32.
    +404 -File or directory not found. The resource you are looking for mighthave been removed, had its name changed, or is temporarily unavailable.+
    Here's the scenario. They are in edit mode on the Formulation Spec.
    They go to the Process tab.
    Click A Step, and see that there are several blank lines at the end of the instructions, and they want to clean up this blank space.
    So they click the Instructions link, and the Instructions pop-up in a rich text editor.
    They click in the editor near the bottom to get a prompt on the last blank line.
    They then hit the backspace key to delete the blank lines.
    As soon as they hit the backspace key the error is thrown in the editor; Not in an error message popup and no error log is recorded in the event logs.
    And to make it even more interesting it doesnt happen all the time!
    Has anyone else seen this behavior within Formulation specs?
    P.S. Its not the IE pop-up blocker either.

    Trey, i just did a quick test and was able to duplicate with the following steps:
    1. open instructions
    2. instead of clicking in the edit textbox, click below the edit textbox (ie. b/w the textbox and keywords)
    3. hit backspace
    404
    my guess is, users are working quickly, think they click in the textbox, but accidently click outside the textbox. backspace is then trying to register a previous page command.
    However, we changed the rich text control in 6.1.1, and it looks like this issue has been corrected.
    if you find a different set of steps to recreate that triggers the 404, let us know.
    thanks,
    -M

  • Project directory not found

    I recently upgraded Final Cut Pro and everything is working...except Color. When I try to launch it I get the error "Project directory not found" and have to force quit the program.
    Any suggestions?

    Just went through a very long and elaborate troubleshoot that was eventually solved by an OS specialist and it involved a trash preferences in FCP and I mean really trash them and empty the trash...
    Not my system, it was somebody else's but it was a root level problem that sounded somewhat similar.
    jPo

  • Ncmpcpp "Directory not found"

    Hi guys
    I recently installed mpd+ncmpcpp, and i seems to work, but when i go into ncmpcpp with terminal
    $ ncmpcpp
    and go in tab "Browse" it says "Directory not found". What can i do here?
    Thanks

    Okay i've made some changes.
    # An example configuration file for MPD
    # See the mpd.conf man page for a more detailed description of each parameter.
    # Files and directories #######################################################
    # This setting controls the top directory which MPD will search to discover the
    # available audio files and add them to the daemon's online database. This
    # setting defaults to the XDG directory, otherwise the music directory will be
    # be disabled and audio files will only be accepted over ipc socket (using
    # file:// protocol) or streaming files over an accepted protocol.
    music_directory "/home/niclas/music"
    # This setting sets the MPD internal playlist directory. The purpose of this
    # directory is storage for playlists created by MPD. The server will use
    # playlist files not created by the server but only if they are in the MPD
    # format. This setting defaults to playlist saving being disabled.
    playlist_directory "/var/lib/mpd/playlists"
    # This setting sets the location of the MPD database. This file is used to
    # load the database at server start up and store the database while the
    # server is not up. This setting defaults to disabled which will allow
    # MPD to accept files over ipc socket (using file:// protocol) or streaming
    # files over an accepted protocol.
    db_file "/var/lib/mpd/mpd.db"
    # These settings are the locations for the daemon log files for the daemon.
    # These logs are great for troubleshooting, depending on your log_level
    # settings.
    # The special value "syslog" makes MPD use the local syslog daemon. This
    # setting defaults to logging to syslog, otherwise logging is disabled.
    log_file "/var/log/mpd/mpd.log"
    # This setting sets the location of the file which stores the process ID
    # for use of mpd --kill and some init scripts. This setting is disabled by
    # default and the pid file will not be stored.
    pid_file "/var/run/mpd/mpd.pid"
    # This setting sets the location of the file which contains information about
    # most variables to get MPD back into the same general shape it was in before
    # it was brought down. This setting is disabled by default and the server
    # state will be reset on server start up.
    state_file "/var/lib/mpd/mpdstate"
    # General music daemon options ################################################
    # This setting specifies the user that MPD will run as. MPD should never run as
    # root and you may use this setting to make MPD change its user ID after
    # initialization. This setting is disabled by default and MPD is run as the
    # current user.
    user "mpd"
    # This setting sets the address for the daemon to listen on. Careful attention
    # should be paid if this is assigned to anything other then the default, any.
    # This setting can deny access to control of the daemon.
    # For network
    bind_to_address "any"
    # And for Unix Socket
    bind_to_address "~/.mpd/socket"
    # This setting is the TCP port that is desired for the daemon to get assigned
    # to.
    port "6600"
    # This setting controls the type of information which is logged. Available
    # setting arguments are "default", "secure" or "verbose". The "verbose" setting
    # argument is recommended for troubleshooting, though can quickly stretch
    # available resources on limited hardware storage.
    log_level "default"
    # If you have a problem with your MP3s ending abruptly it is recommended that
    # you set this argument to "no" to attempt to fix the problem. If this solves
    # the problem, it is highly recommended to fix the MP3 files with vbrfix
    # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
    # point gapless MP3 playback can be enabled.
    gapless_mp3_playback "yes"
    # This setting enables MPD to create playlists in a format usable by other
    # music players.
    save_absolute_paths_in_playlists "no"
    # This setting defines a list of tag types that will be extracted during the
    # audio file discovery process. Optionally, 'comment' can be added to this
    # list.
    metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
    # Symbolic link behavior ######################################################
    # If this setting is set to "yes", MPD will discover audio files by following
    # symbolic links outside of the configured music_directory.
    follow_outside_symlinks "yes"
    # If this setting is set to "yes", MPD will discover audio files by following
    # symbolic links inside of the configured music_directory.
    follow_inside_symlinks "yes"
    # Zeroconf / Avahi Service Discovery ##########################################
    # If this setting is set to "yes", service information will be published with
    # Zeroconf / Avahi.
    #zeroconf_enabled "yes"
    # The argument to this setting will be the Zeroconf / Avahi unique name for
    # this MPD server on the network.
    #zeroconf_name "Music Player"
    # Permissions #################################################################
    # If this setting is set, MPD will require password authorization. The password
    # can setting can be specified multiple times for different password profiles.
    #password "password@read,add,control,admin"
    # This setting specifies the permissions a user has who has not yet logged in.
    #default_permissions "read,add,control,admin"
    # Input #######################################################################
    input {
    plugin "curl"
    # proxy "proxy.isp.com:8080"
    # proxy_user "user"
    # proxy_password "password"
    # Audio Output ################################################################
    # MPD supports various audio output types, as well as playing through multiple
    # audio outputs at the same time, through multiple audio_output settings
    # blocks. Setting this block is optional, though the server will only attempt
    # autodetection for one sound card.
    # See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
    # other audio outputs.
    # An example of an ALSA output:
    audio_output {
    type "alsa"
    name "My ALSA Device"
    device "hw:0,0" # optional
    format "44100:16:2" # optional
    mixer_device "default" # optional
    mixer_control "PCM" # optional
    mixer_index "0" # optional
    # An example of an OSS output:
    #audio_output {
    # type "oss"
    # name "My OSS Device"
    ## device "/dev/dsp" # optional
    ## format "44100:16:2" # optional
    ## mixer_device "/dev/mixer" # optional
    ## mixer_control "PCM" # optional
    # An example of a shout output (for streaming to Icecast):
    #audio_output {
    # type "shout"
    # encoding "ogg" # optional
    # name "My Shout Stream"
    # host "localhost"
    # port "8000"
    # mount "/mpd.ogg"
    # password "hackme"
    # quality "5.0"
    # bitrate "128"
    # format "44100:16:1"
    ## protocol "icecast2" # optional
    ## user "source" # optional
    ## description "My Stream Description" # optional
    ## genre "jazz" # optional
    ## public "no" # optional
    ## timeout "2" # optional
    # An example of a httpd output (built-in HTTP streaming server):
    #audio_output {
    # type "httpd"
    # name "My HTTP Stream"
    # encoder "vorbis" # optional, vorbis or lame
    # port "8000"
    ## quality "5.0" # do not define if bitrate is defined
    # bitrate "128" # do not define if quality is defined
    # format "44100:16:1"
    # An example of a pulseaudio output (streaming to a remote pulseaudio server)
    #audio_output {
    # type "pulse"
    # name "My Pulse Output"
    ## server "remote_server" # optional
    ## sink "remote_server_sink" # optional
    ## Example "pipe" output:
    #audio_output {
    # type "pipe"
    # name "my pipe"
    # command "aplay -f cd 2>/dev/null"
    ## Or if you're want to use AudioCompress
    # command "AudioCompress -m | aplay -f cd 2>/dev/null"
    ## Or to send raw PCM stream through PCM:
    # command "nc example.org 8765"
    # format "44100:16:2"
    ## An example of a null output (for no audio output):
    #audio_output {
    # type "null"
    # name "My Null Output"
    # This setting will change all decoded audio to be converted to the specified
    # format before being passed to the audio outputs. By default, this setting is
    # disabled.
    #audio_output_format "44100:16:2"
    # If MPD has been compiled with libsamplerate support, this setting specifies
    # the sample rate converter to use. Possible values can be found in the
    # mpd.conf man page or the libsamplerate documentation. By default, this is
    # setting is disabled.
    #samplerate_converter "Fastest Sinc Interpolator"
    # Volume control mixer ########################################################
    # These are the global volume control settings. By default, this setting will
    # be detected to the available audio output device, with preference going to
    # hardware mixing. Hardware and software mixers for individual audio_output
    # sections cannot yet be mixed.
    # An example for controlling an ALSA, OSS or Pulseaudio mixer; If this
    # setting is used other sound applications will be affected by the volume
    # being controlled by MPD.
    #mixer_type "hardware"
    # An example for controlling all mixers through software. This will control
    # all controls, even if the mixer is not supported by the device and will not
    # affect any other sound producing applications.
    #mixer_type "software"
    # This example will not allow MPD to touch the mixer at all and will disable
    # all volume controls.
    #mixer_type "disabled"
    # Normalization automatic volume adjustments ##################################
    # This setting specifies the type of ReplayGain to use. This setting can have
    # the argument "album" or "track". See <http://www.replaygain.org> for more
    # details. This setting is disabled by default.
    replaygain "album"
    # This setting sets the pre-amp used for files that have ReplayGain tags. By
    # default this setting is disabled.
    #replaygain_preamp "0"
    # This setting enables on-the-fly normalization volume adjustment. This will
    # result in the volume of all playing audio to be adjusted so the output has
    # equal "loudness". This setting is disabled by default.
    #volume_normalization "no"
    # MPD Internal Buffering ######################################################
    # This setting adjusts the size of internal decoded audio buffering. Changing
    # this may have undesired effects. Don't change this if you don't know what you
    # are doing.
    audio_buffer_size "2048"
    # This setting controls the percentage of the buffer which is filled before
    # beginning to play. Increasing this reduces the chance of audio file skipping,
    # at the cost of increased time prior to audio playback.
    buffer_before_play "10%"
    # Resource Limitations ########################################################
    # These settings are various limitations to prevent MPD from using too many
    # resources. Generally, these settings should be minimized to prevent security
    # risks, depending on the operating resources.
    connection_timeout "60"
    max_connections "10"
    max_playlist_length "16384"
    max_command_list_size "2048"
    max_output_buffer_size "8192"
    # Character Encoding ##########################################################
    # If file or directory names do not display correctly for your locale then you
    # may need to modify this setting. After modification of this setting mpd
    # --create-db must be run to change the database.
    filesystem_charset "UTF-8"
    # This setting controls the encoding that ID3v1 tags should be converted from.
    id3v1_encoding "ISO-8859-1"
    U guys see any errors?
    Last edited by Agurken (2010-03-10 15:16:42)

Maybe you are looking for

  • Problems using Twitter.. I can't tweet in Firefox... How to solve this problem? Thank you

    Hi... My problem is as I say,can't tweet at all... I writte my comment is status bar and then I press button tweet,my status won't tweet... Thank you ,for help...

  • Discoverer List of Worksheets not displaying correctly

    We are having problems with the list of of worksheets portlet not displaying correctly every time. Sometimes the portlet displays the the list of worksheets on a white background with all the grid lines missing, other times it displays correctly. The

  • Extremely slow client view

    Hello all! I'm being able to observe the client I've set up. But the speed at which my view as server is refreshed is so slow that I can't possibly monitor what is being done on the client computer. Just to load the desktop took about 5 minutes. Both

  • I need a better Calendar App!

    Hello  I'm a long time BB user - now with the Q10.  I find the built-in Calendar app fiddley & less than terrific.  Can someone recommend a Calendar app that I could download, even if not free, that is a better business application than the built-in

  • Bridge switches to diff thumbnail when I correct images

    I have this aggravating problem on my home mac that doesn't happen on my laptop or any macs at my work. I open a thumbnail in the RAW browser in Bridge and make adjustments, then I select "done" and it goes back to the Bridge. However, the thumbnail