Work item is not opening while clicking in POWL Task under MSS Portal

Hi ,
I have created custom Iview on portal for POWL. I can see my Powl application but when I select work item which contains all task ...and select any one of them it should open WD abap application but its not opening application and giving error.
There is no iView available for system "": object "SWF_WIOBN" "
Please see attached screen shot .
Can any one tell me what is missing.
Regards,
Vijay

Hi Guru,
Any input..its urgent!.
Regards,
Vijay

Similar Messages

HCM Processes and Forms: Work Item is not opening

Hi,
We are implementaing HCM processes and forms using NWBC (EHP7 - HR Renewal 2.0 FP1) and after using configuration of POWL inbox for MSS and HR Admin, We are not able to launch the Work Item.
1) In MSS Work Book, while launching, we are getting message -
Failed to resolve Object Based Navigation target ".MSS_WL.NAVIGATE_FORM_WD". Use transaction PFCG to define this OBN target in a role or contact your system administrator to assign a role with the relevant OBN entries to your user.
2) For HR Admin, we are getting message - Work Item can only be open using Portal and UWL. and it is displaying back end transaction SWNWIEX.
Detail configuration steps are shown as below -
Workflow Task used in configurations -
1) Entries in IBO_C_WF_TA_P_SC (Assign Task ID’s to POWL Types)
2) IBO_C_WF_ACC configuration - (Define Tasks and Actions)
3) IBO_C_WF_APC configuration (Provide Details of navigation parameters)
4) IBO_V_WF_TTAC (Assignment of Actions to the Tasks)
5) IBO_C_WF_TAC (Specify Default Action)
Error -
1) MSS -
2)HR Admin -

Hi Guru,
Any input..its urgent!.
Regards,
Vijay

When i double click on and item in the firefox downloads window the item dosn't open, left clicking on the item still dose not give me the choice to "open". how to fix this problem thanks

When i double click on an item in the firefox dowloads window the item dos'nt open.Left clicking on the item dose not give me the choice to "open" the item.
the downloaded item is a pdf file of 59 kb, and was downloaded using adobe acrobat version 5

I have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

PO Response approval Work item is not executing from approver inbox.

Hi,
PO Response approval Work item is not executing from approver inbox. After click the approve button system is not showing any error and also work item is not clearing from user inbox. When we checked the status of the work item in SWI1 Transaction is still READY.
Standard Task: TS14508055 - Transfer purchase order response data to purchase order
Business Object: BUS2209
Scenario:
1. Create PO in SRM System, Vendor belongs to SUS System Vendor
2. SUS Vendor creates the PO Response SUS system, POR Value is greater Than PO Value
3. Approval Work item will go to Buyers of purchasing group
4. Buyer trying to approving The PO Response from his approval inbox
Regards,
Surya Sankar

what all buttons do you see when you open the workitem in the approval inbox.
as far as i know , there will only button 'transfer response to purchase order'..
what happens if you click the above button.

I upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues

i upgraded my iphone 4 OS yesterday to ios 5, today morning my phone is not working, i am not able to click any button and also its not allowing me to switch off the phone and restart. Anyone having similar issues?

From my post on what seems like the same issue (found here: https://discussions.apple.com/message/21087892#21087892)
Take the following steps:
1) while connected to wifi, toggle off then back on the Show All Music and iTunes Match options shown in my original post. Important: I did this step before, but wasn't connected to wifi, and my music disappeared. Subsequently, I connected to wifi and turned off and then back on those options and everything came back though it was grayed out and my only option was to download music.
2) To get streaming over cellular back, go into Settings>General>Cellular and scroll down to the "Use Cellular Data for:" options and make sure the iTunes option is set to 'On'
The above steps will bring back the streaming capability which seemed to go away when you update to 6.1. It didn't ACTUALLY go away, but something about the update toggled off the iTunes option in step 2 above.
I did a final test by turning off wifi, opening Music app and selecting a song. It played successfully without downloading! Crossing my fingers, but I think I'm good to go!
Hope this helps!

Work item could not be accepted

Hello,
I have created a simple Workflow in a 4.6C system. The first step is a User Decision step, with two possible decisions. When I assigned standard user decision task TS00008267, it works fine when I test the workflow. But since I want a custom text in the Work Item description, I have copied this task into a custom one, with the same options and everything.
Now, when I test the workflow, the Work Item is generated, but I can't see it in my Business Workplace.
I can see it using SWI1, in status Ready. If I display it and try to execute the activity, I get the message :
Work item could not be accepted (->function canceled)
Without any long text. I have searched everywhere for this, and cannot find why it does that.
Does anyone have an idea ?
Thanks in advance.
Thomas
Edited by: Thomas Debouverie on Jun 11, 2009 10:53 AM

HI,
Open your task. In that go to Additional Data --> Agent Assignment --> Maintain. Select the task. Then click on attributes & select general task there.
Save and try testing your workflow again.
Hope it works.
Regards,
Raj

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Transaltion in work item title not working consistently

Hi,
I am seeing a strange behaviour in SAP business workfplace with respect to the work item title (subject line) translation........................
- Some prelimenary info : All work item translations for title (subject) and work item body are completly maintained
- System : SAP ECC 6.0
Problem being faced
1. Workflow is trigerred by an user with English login and this generates a work item to the another users
2. The work item receipent logs in in different langiage say german...................he then starts SBPW to check this work item
3. The title of the work item appears in english while the same title which appears in the work item body also is shown in German (User log on language)..................
4. The user displays (not execute) the work item........................The work item title is shown in in German.
5. The user returns to the inbox and then the work item title changes to German language.........................
Has any one encountered this problem.......................I looked for SAP notes but could not find any note suitable for this..........................
I assume it is more a SBWP bug but want to gather some experience from this group
Thanks
Kiran

Hi,
This may happen due to the problem in language translation. Please maintain the language translation properly then test it agian.
Pleae check the table HRS1206 where OTYPE = 'TS' and OBJID= 99000031 ( task number ) whether the multiple language translation is maintained or not. If not thenyou need to maintain through transaction SE63.
Please visit below link for more details.
http://wiki.sdn.sap.com/wiki/display/ABAP/TranslatingTaskDescriptionusingSE63
Thanks and regards,
SNJY

Leave Request work items are not showing in SBWP TCODE under OUTBOX .

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

it wont be shown in outbox of SBWP
you need to check via SWIA or rptarqdbview or SWI5 for the user
these are java based tasks so will be done in UWL. you can see only the tasks but after approval they are disappeared.
The outbox shows the last 30 days by default. This default cannot be
changed. This 30 days selection period is always set when you enter
the outbox. However, the user can change the selection period by
clicking the button 'Change selection period' on top of the grid
control but this as you know will be reset once you log out.
This is how the mapping from the
backend workplace folders to the UWL tabs should work:
UWL tab                        Backend folder
Notifications                  Deadline Messages
Tasks-> Completed Tasks        Outbox -> Workitems executed by me
Tracking -> My Requests        Outbox -> Started Workflows
Tracking -> Forwarded          Outbox -> Forwarded workitems
Edited by: Siddharth Rajora on Aug 5, 2011 10:04 AM

Multi object not exported while clicking Edit Object in "Acrobat X Pro to Photoshop CS5"

Subject: Multi object not exported while clicking Edit Object in “Acrobat X Pro to Photoshop CS5”
I unable to get all selected object (images) which from Acrobat X pro to Photoshop CS5, I getting only one image.
It was working fine when used Acrobat 6 & Photoshop CS.
Also I ensured Preference setting as shown below:
Kindly let me know the solution, it should helpful.

Dear Mylenium,
Thanks for your respond on this. However the same scenario is working perfectly in "Acrobat 6" to "Photoshop CS". Could you please clarify?
Pasumalai

Book icon not opening when clicked

I have an odd problem here.
In my Contents tab on the left side, I have eight Book icons
that, when clicked, open to reveal the Help topics inside them-
just like any normal RoboHelp project would work. However, the very
last Book icon in the list does not open when clicked. I checked
the original file and all of the help topics are under the Book
like they should be. When I compile the file and do a View Primary
Layout, this last Book icon opens correctly. The problem only
occurs once the project is built into the software I'm doing the
Help for. When I move the Book icon up in the list (so it's not the
last one anymore) it works correctly. But then the Book icon that
becomes the last icon doesn't open when clicked. So whichever Book
icon is last in the list doesn't open when clicked. Anyone have any
clue what would cause this? Thanks alot.

Hi Scott45 and welcome to the RH community.
Have you tried deleting the book and adding it again? Also
you can open the project's .HHC file in Notepad (or something
similar) and check that the relevant TOC entry is displayed
correctly there.

Workflow error " Work item could not be found"

Hi Experts,
I used transaction SWI2_DIAG to diagnose the error and tried to restart the workitem manually .The changes were made to Org chart and now everything is fine but I am still getting error message:
Work item could not be found
Workflow 'Post with Clearing Workflow' step number 4: work item could not be created
Agent determination for step '0000000004' failed
Workflow WS93000005 no. 000004806372 activity 0000000004 role 'AC00000168': No agent found
Resolution of rule AC00000168 for task TS93000019: no agent found
Can someone explain what this error message mean and why i cant restart the workitem manually?
Thanks.

This is my message from Production:
Resolution of rule AC00000168 for task TS93000019: no agent found
Workflow WS93000005 no. 000004806372 activity 0000000004 role 'AC00000168': No agent found
Agent determination for step '0000000004' failed
Workflow 'Post with Clearing Workflow' step number 4: _work item could not be created_
This is my message from development.. I recreted the scenario and getting different message.
Workflow 'Journal Entry Approval- Approval WF' step number 36: work item could not be created
Agent determination for step '0000000036' failed
Workflow WS93000001 no. 000000986124 activity 0000000036 role 'AC93000003': No agent found
Resolution of rule AC93000003 for task TS00007914: _no agent found_
Edited by: Sergey on Nov 2, 2010 5:05 PM

In Photoshop Elements 11, the editor workspace has stopped working and will not open.

In Photoshop Elements 11, the editor workspace has stopped working and will not open.

Operating system? and how are you opening it? From a shortcut, from the welcome screen, from the organizer, from the program/application file itself?

LeaveRequest Work Items are not shows in SBWP TCODE workplace under outbox

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

HI
Sidhu
Tanks For Ur Replay
i am doing as for u r note..
AFTER DEBUGGING....
function module-- SWK_LOCAL_OUTBOX_GET-under THERE IS NO table->SWW_OUTBOX
PARAMETER NAMES ARE THERE(AVAILABLE)..BUT THIS (SWW_OUTBOX) IS NOT THERE IN TABLES OPTION
WI_LIST_S
WI_LIST_E
WI_LIST_F
STATUSFILTER
TASK_FILTER
yes it wont be shown in sbwp outbox as it is java wd after completion you ll only see for approval in his inbox use swi5...
IN SWI5 TCODE>COMPLETED WORK ITEMS BY AGENT AND TASK-UNDER SHOWING MY LEAVE REQUEST(GOOD)..
CAN PLEASE HELP ME
HOW CAN I GET THE LEAVE WORK ITEMS UNDER SBWP(OUTBOX)
TANKS
RAFI SHAIK

Work items are not visible UWL task are visible in tracking in portal

HI
Friends
i am new from sap Ess/Mss implementation project...
i am facing an Problem " Work items are not visible under UWL in portal overview page"
but i am configured all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
Requestor send an Leave through portal send it successfully......but i am facing a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
i am configured and also registered UWL IN PORTAL..it is good..
in sap ecc i can assigned UWL_SERVICE user to roles
1.SAP_BC_BMT_WFM_UWL_ADMIN
2.SAP_BC_BMT_WFM_UWL_END_USER
3.SAP_BC_ADMIN_USER
4.SAP_BC_UWL_SERVICE
PLEASE HELP ME.
Tanks
Shaik Rafi

Hi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S

Work item is not opening while clicking in POWL Task under MSS Portal

Similar Messages

Maybe you are looking for