Work Items are not pulled from SRM into SAP Fiori

Hi Friends,
We are using Application controlled workflow in SAP SRM. As Fiori won't support application controlled workflow, I have followed the guide to configure the task as custom workflow in scenario definition. But its not pulling the work item from SRM in Fiori tile. My tile shows 0.
When I  click on the same to go in, I am getting the below error.
A problem occurred while reading the data
Check the URL parameters and the scenario definition. To check the scenario definition, go to customizing for SAP NetWeaver Gateway and choose SAP NetWeaver -> Gateway Service Enablement -> Content -> Task Gateway Service -> Scenario Definition. 
Tags edited by: Michael Appleby

Hi Sasi,
It would not be possible to use application controlled workflow with SAP Fiori approve shopping cart app. Please refer note 1962663 for more details on SAP Fiori approve shopping cart app.
Regards,
Amrutha

Similar Messages

  • PO Response approval Work item is not executing from approver inbox.

    Hi,
    PO Response approval Work item is not executing from approver inbox. After click the approve button system is not showing any error and also work item is not clearing from user inbox. When we checked the status of the work item in SWI1 Transaction is still READY.
    Standard Task: TS14508055 - Transfer purchase order response data to purchase order
    Business Object: BUS2209
    Scenario:
    1. Create PO in SRM System, Vendor belongs to SUS System Vendor
    2. SUS Vendor creates the PO Response SUS system, POR Value is greater Than PO Value
    3. Approval Work item will go to Buyers of purchasing group
    4. Buyer trying to approving The PO Response from his approval inbox
    Regards,
    Surya Sankar

    what all buttons do you see when you open the workitem in the approval inbox.
    as far as i know , there will only button 'transfer response to purchase order'..
    what happens if you click the above button.

  • LeaveRequest Work Items are not shows in SBWP TCODE workplace under outbox

    Hi
    Friends
    I used work flow 12300111 for leave request process and I activated that work flow.
    I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
    and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
    Manger Approve the leave request has been approved successfully.
    can I check whether leave request is processed in R/3.
    in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
    But in r/3 i execute the Tcode SBWP...
    here is no work items are not showing in outbox..
    Please help me
    Rafi Shaik

    HI
    Sidhu
    Tanks For Ur Replay
    i am doing as for u r note..
    AFTER DEBUGGING....
    function module-- SWK_LOCAL_OUTBOX_GET-under THERE IS NO table->SWW_OUTBOX
    PARAMETER NAMES ARE THERE(AVAILABLE)..BUT THIS  (SWW_OUTBOX) IS NOT THERE IN TABLES OPTION
    WI_LIST_S
    WI_LIST_E
    WI_LIST_F
    STATUSFILTER
    TASK_FILTER
    yes it wont be shown in sbwp outbox as it is java wd after completion you ll only see for approval in his inbox use swi5...
    IN SWI5 TCODE>COMPLETED WORK ITEMS BY AGENT AND TASK-UNDER SHOWING MY LEAVE REQUEST(GOOD)..
    CAN PLEASE HELP ME
    HOW CAN I GET THE LEAVE WORK ITEMS UNDER SBWP(OUTBOX)
    TANKS
    RAFI SHAIK

  • Leave Request work items are not showing in SBWP TCODE under OUTBOX .

    Hi
    Friends
    I used work flow 12300111 for leave request process and I activated that work flow.
    I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
    and I got  Leave request(work items) Managers in box(uwl in Manager Login in portal).
    Manger Approve the leave request has been approved successfully.
    can I check whether leave request is processed in R/3.
    in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
    But in r/3 i execute the Tcode SBWP...
    here is no work items are not showing in outbox..
    Please help me
    Rafi Shaik

    it wont be shown in outbox of SBWP
    you need to check via SWIA or rptarqdbview or SWI5 for the user
    these are java based tasks so will be done in UWL. you can see only the tasks but after approval they are disappeared.
    The outbox shows the last 30 days by default. This default cannot be
    changed. This 30 days selection period is always set when you enter
    the outbox. However, the user can change the selection period by
    clicking the button 'Change selection period' on top of the grid
    control but this as you know will be reset once you log out.
    This is how the mapping from the
    backend workplace folders to the UWL tabs should work:
    UWL tab                        Backend folder
    Notifications                  Deadline Messages
    Tasks-> Completed Tasks        Outbox -> Workitems executed by me
    Tracking -> My Requests        Outbox -> Started Workflows
    Tracking -> Forwarded          Outbox -> Forwarded workitems
    Edited by: Siddharth Rajora on Aug 5, 2011 10:04 AM

  • Work items are not visible  UWL task are visible in tracking in portal

    HI
    Friends
    i  am new from sap Ess/Mss implementation project...
    i am facing an Problem " Work items are not visible under UWL in portal overview page"
    but i am configured  all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
    Requestor send an Leave through portal send it successfully......but i am facing  a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
    i am configured and also registered UWL IN PORTAL..it is good..
    in sap ecc i can assigned UWL_SERVICE user to roles
    1.SAP_BC_BMT_WFM_UWL_ADMIN    
    2.SAP_BC_BMT_WFM_UWL_END_USER
    3.SAP_BC_ADMIN_USER
    4.SAP_BC_UWL_SERVICE
    PLEASE HELP ME.
    Tanks
    Shaik Rafi

    Hi All,
    In such cases, please try to check as below :
    1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
    2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
    3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
    4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
    5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
    Revert if further help is needed with more info.
    Reward points if found useful.
    Regards,
    Shri vidya S

  • I am constantly told by Itunes that 107 items are not synching from my contacts. This is a message from the Conflict Resolver that appears whenever I synch. I try to resolve the synch and a text message pops up telling me it could not find the synch serve

    I am constantly told by Itunes that 107 items are not synching from my Ipod Touch to/from Outlook Contacts. I try to resolve the issue and eventually a message pops up saying it could not be completed because it could not find the sync server. This started after one of the updates a couple of months ago. If anyone has found a similar problem and resolved it I would appreciate any assistance.
    Thanks

    Try here:
    Advanced troubleshooting for Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
    Sync Services: Advanced troubleshooting for contact and calendar syncing

  • Work items are not dis appearing in my inbox for parked FI invoices.

    Hi,
    work items are not dis appearing in my inbox for parked FI invoices.
    We are using asynchronus method, and terminating event for this method.
    Could you please suggest, what will be the reason for this.
    Thanks & Regards
    Madhu

    Hi Karri,
    Thank you for your response.
    But the event is triggering, No error message is getting.
    Any other idea about the issue.
    Thanks & Regards
    Madhu

  • HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

    I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

    You cannot.
    You cannot use another countrys itunes store.
    You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
    The owners of the distribution rights of movies/music/etc differ by country.  These distributors decide who can sell their content in that country.
    Buy from another source if your countrys itunes store does not carry somehting that you want.

  • Work items are not visible under UWL in portal ?

    Hi,
    We are upgrading from SRM 5.0 to SRM 7.0.
    We have observed one issue here. Workitems are not visible in UWL in portal.
    But workitems are available in SAP inbox. i.e SBWP.
    Completed items we can see in UWL.
    Could you please let me know any idea on this.
    Regards
    Venkatesh P
    Edited by: Venkatesh Padarti on Dec 9, 2010 8:28 AM
    Edited by: Venkatesh Padarti on Dec 9, 2010 8:29 AM

    Hi Venkatesh,
    Can you please share the solution? Which base URL was wrong and where did you correct that?
    Your help is really appreciated.
    I had post the same question at SRM workflow - work Item is not being displayed If you want to reply there. I will definitely, reward with points too.
    Thanks,
    Bhavik

  • Quotation Items are not displayed on SRM Web

    Hi experts!
    I did a program to create a quotation based on a Bid invitation.
    My program creates the document correctly, but, when i try to show the quotation on the browser, the quotation items are not displayed.
    If I open this same quotation on the SRM Gui (TCODE = BBP_PD), the quotation items are there.
    Anybody in here already had this problem?
    Thanks in advance.
    Danilo Cardoso

    Hi.
    I got to fix my program!
    My code is like that below:
          ls_quot_item_e-src_guid        = bid_items-guid.
          ls_quot_item_e-src_object_type = 'BUS2200001'.
    The business object BUS2200001 is the BO of Items of Bid Invitation, now, my reference is complete.
    It works fine now.
    Thanks for you help.
    Regards.
    Danilo

  • Item text and item note are not transfering from SRM to ECC on to PR

    Hello Expers!!!
    Due to some requirement we added some logic in BBP_CREATE_BE_RQ_NEW to print the used ID of the shopping cart creator on PR under item text requisitioner tab. but after moving these changes to production the item text(Vendor text) and item note(internal note) which are maintained in the shopping cart are not printing on the Purchase requisition under item text and item note tabs. these two texts were printing correctly before moving our changes.
    please suggest me how this item note and item text will print on PR. Is it a standard functionlity in SRM 5.0?
    is this because of move over changes?
    suggest me to resolve the issue....
    thanks in advance...
    Regards,
    CD Reddy

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Approved Task items are not disappearing from uwl task list

    Hi
    we have implemended Guided procedures with universal work list. For most of the users, once the any task items are approved, it suppose to disappear from the task list. But it is not disappearing from the task list. Even if i click on "refresh" under flter option. Please let me now how to get rid of this issue.
    thanks
    vijay

    Hi,
    Have a look on my reply on the thread:
    Uwl tasks status not get updated in Portal
    Regards,
    Fabio

  • GP Work Items are not coming in UWL after refresh the cache.

    Hi All,
    We are facing strange problem. We have cleared the UWL Cache for the GP connector and after that workitems releated to GP are not showing up into the UWL.
    Any Idea.??
    Thanks
    Dheerendra

    Hi Dheerendra,
    Are you using Federation by any chance? I mean, your GP runs on one server and you are using the UWL on the other server via federation? If yes then please check if the federation has been configured correctly and is working fine.
    The other thing you can check is that the GPConnector is deactivated by mistake. If yes, then activate it.
    Another check can be done in the System Configuration of the System Alias you are using for the GPConnector. Check whther it is pointing the correct sustem configuration. check whether the connection tests to that system are successful.
    Also check whether the GPWorkItemProvider Web Service is working.
    Regards,
    Ajay

  • Items are not removed from Workflow Inbox

    Hi all,
    Im having problem with our workflow. Below are the details
    SCENARIO:
    User A creates a PR. The PR is then forwarded to user B for approval. Once the PR is approved by user B, it is forwarded back to user A for notification purposes. User A then executes the PR and it is automatically forwarded to user C for processing.
    THE PROBLEM:
    When user B approves the PR, his/her inbox should be cleared once the PR is forwarded to user A. The problem  is that, out of the 45 line items present in the PR, only 38 lines were cleared from the inbox. The remaining 7 items were retained. However, when we try to view the PR from user A, there are 45 line items and they are complete.
    QUESTION:
    What causes the 7 line items to be retained in user A's inbox? How do we clear them?
    Any output will be highly appreciated.
    Thanks

    Hi,
    The user B approved the PR accessing the transaction SBWP or via PR transaction directly?
    If via PR transaction directly, then your workflow needs a Wait Event step.
    Regards,
    Kleber

  • Click to call plugin from outlook 2010 not dialing contacts which are not pulled from AD

    Hi Experts,
    we have this issue with click to call plugging from outlook 2010.
    when there is a mail from a non corporate user ( a person who is not in AD) in the inbox, and we try to make a call to that person, click to call plugging does not allow to make a call from the outlook. Even though this contact is present in the outlook contacts.
    But for corporate users ( who are in AD) there are no issues.
    Is this a limitation of click to call or a configuration error ?
    Regards
    Bejoy Thomas

    Hi Shangxin,
    If you go throught my question again, I mentioned the contact detail for this person is present in the Outlook contacts.
    That is I have saves this person's phone number in my outlook contacts.
    Please let know if you have a solution for this issue.
    Regards
    Bejoy Thomas

Maybe you are looking for

  • Which are the standard assignment blocks that should appear in SAP Product?

    Hello Guru's Currently I am creating some new products to check the fields available in every assingment block within the product, when I create my new transaction and add a new position (product) I went in the link to see the product information whi

  • Invalid objects in APEX Schemas after import.

    Hi, After importing the APEX_040100 user in the database I got several invalid objects that are causing APEX not to work. I gave up to compile them. After using all kind of tricks such as compile one schema at a time or compile all of them using the

  • How do I plug a non-USB microphone into a Mac Pro?

    Question from an audio newbie....I've got a 2009 Mac Pro desktop computer. I just bought a microphone headset. The headset has a two-pronged plug in, a green one for the headset (speakers) and a pink one for the microphone. My Mac Pro has two speaker

  • My iphoto open and  close and don't work. What can I do?

    My iphoto open and few seconds later close and don't work. What can I do?

  • Acrobat Pro crash

    After using 3d pdf file, Acrobat X Pro crashed and don't start anymore. Shutdown, restart I have tried already. No result. In win task manager there are only arcotray, and if I try to start program then acrobat.exe*32 appears only for 1 second inside