Work items are not visible under UWL in portal ?

Hi,
We are upgrading from SRM 5.0 to SRM 7.0.
We have observed one issue here. Workitems are not visible in UWL in portal.
But workitems are available in SAP inbox. i.e SBWP.
Completed items we can see in UWL.
Could you please let me know any idea on this.
Regards
Venkatesh P
Edited by: Venkatesh Padarti on Dec 9, 2010 8:28 AM
Edited by: Venkatesh Padarti on Dec 9, 2010 8:29 AM

Hi Venkatesh,
Can you please share the solution? Which base URL was wrong and where did you correct that?
Your help is really appreciated.
I had post the same question at SRM workflow - work Item is not being displayed If you want to reply there. I will definitely, reward with points too.
Thanks,
Bhavik

Similar Messages

  • Work items are not visible  UWL task are visible in tracking in portal

    HI
    Friends
    i  am new from sap Ess/Mss implementation project...
    i am facing an Problem " Work items are not visible under UWL in portal overview page"
    but i am configured  all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
    Requestor send an Leave through portal send it successfully......but i am facing  a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
    i am configured and also registered UWL IN PORTAL..it is good..
    in sap ecc i can assigned UWL_SERVICE user to roles
    1.SAP_BC_BMT_WFM_UWL_ADMIN    
    2.SAP_BC_BMT_WFM_UWL_END_USER
    3.SAP_BC_ADMIN_USER
    4.SAP_BC_UWL_SERVICE
    PLEASE HELP ME.
    Tanks
    Shaik Rafi

    Hi All,
    In such cases, please try to check as below :
    1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
    2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
    3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
    4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
    5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
    Revert if further help is needed with more info.
    Reward points if found useful.
    Regards,
    Shri vidya S

  • GP Work Items are not coming in UWL after refresh the cache.

    Hi All,
    We are facing strange problem. We have cleared the UWL Cache for the GP connector and after that workitems releated to GP are not showing up into the UWL.
    Any Idea.??
    Thanks
    Dheerendra

    Hi Dheerendra,
    Are you using Federation by any chance? I mean, your GP runs on one server and you are using the UWL on the other server via federation? If yes then please check if the federation has been configured correctly and is working fine.
    The other thing you can check is that the GPConnector is deactivated by mistake. If yes, then activate it.
    Another check can be done in the System Configuration of the System Alias you are using for the GPConnector. Check whther it is pointing the correct sustem configuration. check whether the connection tests to that system are successful.
    Also check whether the GPWorkItemProvider Web Service is working.
    Regards,
    Ajay

  • LeaveRequest Work Items are not shows in SBWP TCODE workplace under outbox

    Hi
    Friends
    I used work flow 12300111 for leave request process and I activated that work flow.
    I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
    and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
    Manger Approve the leave request has been approved successfully.
    can I check whether leave request is processed in R/3.
    in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
    But in r/3 i execute the Tcode SBWP...
    here is no work items are not showing in outbox..
    Please help me
    Rafi Shaik

    HI
    Sidhu
    Tanks For Ur Replay
    i am doing as for u r note..
    AFTER DEBUGGING....
    function module-- SWK_LOCAL_OUTBOX_GET-under THERE IS NO table->SWW_OUTBOX
    PARAMETER NAMES ARE THERE(AVAILABLE)..BUT THIS  (SWW_OUTBOX) IS NOT THERE IN TABLES OPTION
    WI_LIST_S
    WI_LIST_E
    WI_LIST_F
    STATUSFILTER
    TASK_FILTER
    yes it wont be shown in sbwp outbox as it is java wd after completion you ll only see for approval in his inbox use swi5...
    IN SWI5 TCODE>COMPLETED WORK ITEMS BY AGENT AND TASK-UNDER SHOWING MY LEAVE REQUEST(GOOD)..
    CAN PLEASE HELP ME
    HOW CAN I GET THE LEAVE WORK ITEMS UNDER SBWP(OUTBOX)
    TANKS
    RAFI SHAIK

  • Leave Request work items are not showing in SBWP TCODE under OUTBOX .

    Hi
    Friends
    I used work flow 12300111 for leave request process and I activated that work flow.
    I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
    and I got  Leave request(work items) Managers in box(uwl in Manager Login in portal).
    Manger Approve the leave request has been approved successfully.
    can I check whether leave request is processed in R/3.
    in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
    But in r/3 i execute the Tcode SBWP...
    here is no work items are not showing in outbox..
    Please help me
    Rafi Shaik

    it wont be shown in outbox of SBWP
    you need to check via SWIA or rptarqdbview or SWI5 for the user
    these are java based tasks so will be done in UWL. you can see only the tasks but after approval they are disappeared.
    The outbox shows the last 30 days by default. This default cannot be
    changed. This 30 days selection period is always set when you enter
    the outbox. However, the user can change the selection period by
    clicking the button 'Change selection period' on top of the grid
    control but this as you know will be reset once you log out.
    This is how the mapping from the
    backend workplace folders to the UWL tabs should work:
    UWL tab                        Backend folder
    Notifications                  Deadline Messages
    Tasks-> Completed Tasks        Outbox -> Workitems executed by me
    Tracking -> My Requests        Outbox -> Started Workflows
    Tracking -> Forwarded          Outbox -> Forwarded workitems
    Edited by: Siddharth Rajora on Aug 5, 2011 10:04 AM

  • Work items are not dis appearing in my inbox for parked FI invoices.

    Hi,
    work items are not dis appearing in my inbox for parked FI invoices.
    We are using asynchronus method, and terminating event for this method.
    Could you please suggest, what will be the reason for this.
    Thanks & Regards
    Madhu

    Hi Karri,
    Thank you for your response.
    But the event is triggering, No error message is getting.
    Any other idea about the issue.
    Thanks & Regards
    Madhu

  • My Custom repositories are not visible under content tab of ACC

    Hi,
    My Custom repositories are not visible under content tab of ACC ,eventhough i had appended my custom repository in /atg/registry/ContentRepositories.properties to the property
    initialRepositories+=/myCustomRepository.PLEASE HELP ME.

    Kindly make sure,
    initialRepositories+=/com/training/club/tools/myCustomRepository
    I assume you have config/com/training/club/tools/myCustomRepository.properties component. /com/training/club/tools/ is your path of component from config.
    -RMisihra

  • Custom work centers are not visible in the production tenant UI after solution is deployed

    Hi Experts,
    We have deployed the solution into the production tenant. The solution is deployed successfully. But the custom business option(BAC) element which we have created is not part of proejct scoping.
    We have created a new change project in production and added the custom business option to the project.
    Under this custom business option we have fine tuning activity which is having all the custom configurable code lists.
    All these configurable code list are not visible as views. these are already assigned to WCF of one of our custom BO under asssinged objects.
    These configurable code lists are displaying like below.
    Because of this i am not able to close this fine tuning activity and i am not able merge the change project into Main project.
    Once after merging the change project into main project, I came to know the all the custom work centers will be visible. I am correct here?
    Can anybody know how to resolve this issue. Please let us know..!
    Thanks,
    Mani

    Hi Mani,
    this issue sometimes occurs. Please create an incident as soon as possible. Sometimes the BCSets / BCViews need to be regenerated in the backend. Support can correct this. Mention that you did this using the SAP Cloud Applications Studio.
    In general please ask such question here: SAP Cloud Applications Studio
    Cheers,
    Jens

  • All my sent items are not visible in outlook

    When I send email from my iphone I can't see it in sent items in my desktop pc's outlook 2013. However, all inbox items are visible. My OS is windows 8 pro.
    Thanks

    Looking at the .mac mail folder, there are no black triangles, I have inbox, drafts and sent (and trash) icons.
    I tested the .mac mail (I know I keep saying "this site" but I don't know what else to call it?), and using this one it does keep a copy of the sent items. BUT using the Mail (the stamp icon mail) copies of sent items are not saved.
    I want to use the Mail one, because you can choose fonts and all that other stuff, which is why I even purchased the year membership! (otherwise I would just stay with Yahoo mail).
    I really don't have a clue about this stuff and I appreciate you taking your time here.

  • Items are not visible in multi-select listbox in a static form

    Hi,
    I'm using adobe livecycle designer 8.0. I have a multi-select listbox, the items are hardcoded into the form. In runtime, some of the items are selected from the server side when the PDF is generated. If only one item is selected then there is no issue. When multiple items are selected, the list box is behaving as below.
    If the PDF is static,
    If the listbox is readonly, then all the selected items are visible (highlighted in red)
    If the listbix is editable, then it appears blank. If you select it using right click, then you can see all the items and the selected items. But if you click again somewhere outside the listbox, then the listbox goes blank. If you select it using left click, then the previous selections are gone and the items are visible with the item you just selected.
    If the PDF is dynamic, then the multi-select  is working fine.
    Aren't the multi-select listboxes supported in static PDFs?
    For your reference, I created 2 templates (static and dynamic) and populating the values using javascript in the docReady event. I'm using \n character as delimter to select the multiple items. Please find them at the below links.Notice the "List Box 1" in both forms. In static form, the values appear only after you right click the listbox.
    http://share1t.com/sd4huu
    http://share1t.com/hjbfr6
    Thanks
    Ram

    Hi All,
    In such cases, please try to check as below :
    1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
    2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
    3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
    4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
    5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
    Revert if further help is needed with more info.
    Reward points if found useful.
    Regards,
    Shri vidya S

  • Approved Task items are not disappearing from uwl task list

    Hi
    we have implemended Guided procedures with universal work list. For most of the users, once the any task items are approved, it suppose to disappear from the task list. But it is not disappearing from the task list. Even if i click on "refresh" under flter option. Please let me now how to get rid of this issue.
    thanks
    vijay

    Hi,
    Have a look on my reply on the thread:
    Uwl tasks status not get updated in Portal
    Regards,
    Fabio

  • Work Items are not pulled from SRM into SAP Fiori

    Hi Friends,
    We are using Application controlled workflow in SAP SRM. As Fiori won't support application controlled workflow, I have followed the guide to configure the task as custom workflow in scenario definition. But its not pulling the work item from SRM in Fiori tile. My tile shows 0.
    When I  click on the same to go in, I am getting the below error.
    A problem occurred while reading the data
    Check the URL parameters and the scenario definition. To check the scenario definition, go to customizing for SAP NetWeaver Gateway and choose SAP NetWeaver -> Gateway Service Enablement -> Content -> Task Gateway Service -> Scenario Definition. 
    Tags edited by: Michael Appleby

    Hi Sasi,
    It would not be possible to use application controlled workflow with SAP Fiori approve shopping cart app. Please refer note 1962663 for more details on SAP Fiori approve shopping cart app.
    Regards,
    Amrutha

  • Work item text not visible in SAP inbox

    Hi All,
    I have used standard task in custom workflow.
    On triggering task, workitem text maintained for workitem is not triggered under title colum in SAP inbox.Instead, workitem name is  visible in Inbox.
    Can you please guide how workitem text would be triggered?
    Thanks.

    Hi,
    Workitem text is associated with definition of task.
    There is no need to trigger it and it will be populated in the workitem created as part of the task.
    .Instead, workitem name is visible in Inbox.
    Inbox???
    You mean UWL.
    Cheers,
    Raja.D

  • Seminar Sessions are not visible under My Calendar for Seminar Hosts

    Dear support Team,
    I have created 2 Seminar sessions but I am not able to see the sessions under My Calendar, even if I am the host of the Seminar. Last week, it was possible to display the session... Do you know if it is due to the settings?
    Thanks!
    BR,
    maria.

    The following details will display while applying for leave below the calender images
    You have selected the following leave requests:
    Type of Leave : Flexi Leave
    Date : 20.03.2008 To 20.03.2008
    Duration : 7.8 hours
    Note for approver:   Please may i have 1 day leave
    Cancel button
    once the manager approves the leave, employee can view the calender about the status.  If approved the employee can click on the date to see the note which was written by the manager.  Even manager also can view the note in MSS > Attendance > Team calender.
    You have selected the following leave requests:
    Type of Leave : Flexi Leave
    Date : 20.03.2008 To 20.03.2008
    Duration : 7.8 hours
    Previous Notes :   Your leave is approved
                               Please may i have 1 day leave
    Cancel button
    But after approving the leave, the employees and the manager are not able to view the note ie., Previous Note
    how can i make visible to both????

  • All items are not visible even with no filter

    I have a custom list and am not able to run a search the list, through the "all items" view, even with no filter set.  The list is also set to only view 50 items at a time, but I am not able to view the next batch of items.  The search
    will give no results even when the list contains the item with that specific information.

    Hi,
    1) I understand you are not able to view the 'All Items' in the list.
    Can you check the total number of items that list contains.
    Go to Site Actions-->View All site content see the number of items beside the list name( right side)
    I suspect the list might be reached the threshold value.
    2) If the number of Items are less than the threshold value then I would suggest you do a  test by creating another view by providing only the view name (Don't use any sort, Filter, Groupby ...etc) and just keep the default settings and let me
    know if you are able to see the items using the newly created view.
    ****************************************************************************************** Please remember to mark your question as answered &Vote helpful, if this solves/helps your problem.
    s p kumar

Maybe you are looking for

  • When we turn on a Macbook 2004 it only has a white screen.  Is there a way to get it to boot?

    We were trying to copy a family DVD using Disk utility.  We ejected the disk that was in the computer (the DVD player was working) and put in the new disk.  It would not read the disk.  It would not eject the disk.  When we restarted the computer, we

  • Disable preferences option to temporarily save documents (security hole?)

    Hi Adobe Community, we have a project where we want to use Adobe Acrobat X as Scan-Software for secure content. With the help of a predefined action, the scan gets directly encrypted. The problem that we have with this approach, is that there is a pr

  • Help Business Component JSP Application

    I have a problem. I already have my project with my BC4J Components and my project created using the wizard Business Component JSP Aplication. But I just created the JSP Pages for one ViewObject. I don`t know how to add the JSP Pages from another Vie

  • Spaces..... Light sensor?

    Hi. Prior to upgrading to Leopard, I ran VirtueDesktops on Tiger. VirtueDesktops was able to take advantage of the light sensor under the left side of the MacBook Pro keyboard. To switch desktops all I had to do was move my left (non-mouse) hand over

  • Deploy problem with ejb jar in WEB-INF/lib

    Please help with : StringIndexOutOfBoundsException On WL 6.1 sp2, I have one EJB jar that deploys fine in an expanded EAR structure, this has EJB jars and the web apps together running under a single JVM. But when I need to deploy the Web App to a se