Work items are not visible  UWL task are visible in tracking in portal

HI
Friends
i  am new from sap Ess/Mss implementation project...
i am facing an Problem " Work items are not visible under UWL in portal overview page"
but i am configured  all the ess/mss related things....and also Created for one user for Requester(send Leave Request)...and one more user for App-rover(Apporve an Leave)..
Requestor send an Leave through portal send it successfully......but i am facing  a problem in uwl under work items are not showing in overview page...but in tracking work items are (Leave request)showing.....work items are not showing in uwl TASK(VERY PROBLEM)...
i am configured and also registered UWL IN PORTAL..it is good..
in sap ecc i can assigned UWL_SERVICE user to roles
1.SAP_BC_BMT_WFM_UWL_ADMIN    
2.SAP_BC_BMT_WFM_UWL_END_USER
3.SAP_BC_ADMIN_USER
4.SAP_BC_UWL_SERVICE
PLEASE HELP ME.
Tanks
Shaik Rafi

Hi All,
In such cases, please try to check as below :
1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
Revert if further help is needed with more info.
Reward points if found useful.
Regards,
Shri vidya S

Similar Messages

  • Errors are not showing in Tasks view

    Hello,
    I dont know why errors are not showing in Tasks view after I click Save All Metada, they only show when a Rebuild de project. This start to happen after a few days, can anyone tell me how to fix this?
    Thanks

    Hi Carol,
    After rebuild all compile time dependency and syntax might be checked and something is missing then errors suppose to come.
    If you have doubt you can re install the NWDS...
    Deepak!!!

  • An hour ago, I accidentally deleted a "Bookmarks" folder, and all of subfolders and hyperlinks. The lost items are not in "Trash." Are they still retrievable? JAW

    An hour ago, I accidentally deleted a Bookmarks folder, and all of subfolders and hyperlinks. The lost items are not in "Trash." Are they still retrievable? JAW

    They don't go into the Trash. Unless you have a backup prior to the deletion time it's gone.

  • TS1368 I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.

    I want to delete a lot of things childrens stories, albums which are not used which that are on my ipad. However when I go through Itunes it wont show me most of the stuff in my library. it takes ages to delete one at a time.
    Can you help please?

    Thanks King_Penguin for taking time to read and reply. 
    I just purchased this movie on Thursday, May 15, so just a few days ago.  I have never had any trouble whatsoever since I have been in Vietnam.  I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase. 
    Sorry, I don't quite understand what you mean by studios and different versions.  Could you please explain? 
    I checked my purchased list in my purchase history under my account and there are no hidden items. 

  • Workflow error " Work item could not be found"

    Hi Experts,
    I used transaction SWI2_DIAG to diagnose the error and tried to restart the workitem manually .The changes were made to Org chart  and now everything is fine but I am still getting error message:
    Work item could not be found                                                             
    Workflow 'Post with Clearing Workflow' step number 4: work item could not be created     
    Agent determination for step '0000000004' failed                                         
    Workflow WS93000005 no. 000004806372 activity 0000000004 role 'AC00000168': No agent found
    Resolution of rule AC00000168 for task TS93000019: no agent found   
    Can someone explain what this error message mean and why i cant restart the workitem manually?
    Thanks.

    This is my message from Production:
    Resolution of rule AC00000168 for task TS93000019: no agent found                         
    Workflow WS93000005 no. 000004806372 activity 0000000004 role 'AC00000168': No agent found
    Agent determination for step '0000000004' failed                                          
    Workflow 'Post with Clearing Workflow' step number 4: _work item could not be created_      
    This is my message from development.. I recreted the scenario and getting different message.
    Workflow 'Journal Entry Approval- Approval WF' step number 36: work item could not be created 
    Agent determination for step '0000000036' failed                                              
    Workflow WS93000001 no. 000000986124 activity 0000000036 role 'AC93000003': No agent found    
    Resolution of rule AC93000003 for task TS00007914: _no agent found_
    Edited by: Sergey on Nov 2, 2010 5:05 PM

  • PO Response approval Work item is not executing from approver inbox.

    Hi,
    PO Response approval Work item is not executing from approver inbox. After click the approve button system is not showing any error and also work item is not clearing from user inbox. When we checked the status of the work item in SWI1 Transaction is still READY.
    Standard Task: TS14508055 - Transfer purchase order response data to purchase order
    Business Object: BUS2209
    Scenario:
    1. Create PO in SRM System, Vendor belongs to SUS System Vendor
    2. SUS Vendor creates the PO Response SUS system, POR Value is greater Than PO Value
    3. Approval Work item will go to Buyers of purchasing group
    4. Buyer trying to approving The PO Response from his approval inbox
    Regards,
    Surya Sankar

    what all buttons do you see when you open the workitem in the approval inbox.
    as far as i know , there will only button 'transfer response to purchase order'..
    what happens if you click the above button.

  • Work item could not be accepted

    Hello,
    I have created a simple Workflow in a 4.6C system. The first step is a User Decision step, with two possible decisions. When I assigned standard user decision task TS00008267, it works fine when I test the workflow. But since I want a custom text in the Work Item description, I have copied this task into a custom one, with the same options and everything.
    Now, when I test the workflow, the Work Item is generated, but I can't see it in my Business Workplace.
    I can see it using SWI1, in status Ready. If I display it and try to execute the activity, I get the message :
    Work item could not be accepted (->function canceled)
    Without any long text. I have searched everywhere for this, and cannot find why it does that.
    Does anyone have an idea ?
    Thanks in advance.
    Thomas
    Edited by: Thomas Debouverie on Jun 11, 2009 10:53 AM

    HI,
    Open your task. In that go to Additional Data --> Agent Assignment --> Maintain. Select the task. Then click on attributes & select general task there.
    Save and try testing your workflow again.
    Hope it works.
    Regards,
    Raj

  • For itunes 11: movie that are not purchased via itunes are loaded into and catagorized as "home videos". I want all of my movies in one spot under Movies as they always were. How can i tweak this?

    for itunes 11: movie that are not purchased via itunes are now loaded into and catagorized as "home videos". I want all of my movies in one spot under Movies as they always were. How can i tweak/resolve this?

    Cdaver wrote:
    I have this issue too and want the same result, another feed suggests selecting the movie, going to get info, and changing this under options, but I suppose you have to do that movie by movie.
    You can select all the movies you want and change them at once.

  • Hi.. I got some problem  when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

    Hi.. I got some problem  when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

    Hello:
    I am not being critical, but you seem to want Safari to behave exactly like Chrome.  Every software developer has a plan.  Sometimes features in one product parallel other products - sometime not.  There might be some things available that would help you.  Do not hold your breath, however, for suggestions from people who use these forums.  Most of us use (and like) Apple products.  If you wish to make suggestions for future improvements, there is a feedback area on this web site that Apple employees read/review.
    Candidly, your approach would be akin to suggesting that Apple emulate the "features" in Windows (heaven forbid).
    I use Safari (and have for years).  I use Firefox (not a bad product) as my alternate browser.
    Sorry for what appears to be a pedantic lecture.  However, I think most of us adapt to different products if we really want to use them.
    Barry
    Message was edited by: Barry Hemphill

  • Hello, i have a problem with my macbook air. When i try to open my iPhoto i should wait about 3mins to get opened it and also in it just appeared around 57000 photos! in which i have 2000. they are not mine, the photos are pics of other people or things

    hello, i have a problem with my macbook air. When i try to open my iPhoto i should wait about 3mins to get opened it and also in it just appeared around 57000 photos! in which i have 2000. they are not mine, the photos are pics of other people or things

    If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • How can I install plugins? my files are not opening because some are missing after updating my OS

    How can I install plugins? my files are not opening because some are missing after updating my OS
    I can´t update the software because it crashes
    Thanks

    Casiii which Adobe software or service is your inquiry in reference too?

  • Invalid execution GUID. Work item could not be completed.

    Hi People,
    Lately, users have been complaining a lot of Invalid execution GUID. Work item could not be completed. What does it mean exactly, in a general sense, as I know it depends on the error. But what is the general consensus of such an occurence?

    John,
    check this link
    http://mailman.mit.edu/pipermail/sap-wug/2007-February/025056.html
    Thanks
    Bala Duvvuri

  • Work item is not opening while clicking in POWL Task under MSS Portal

    Hi ,
    I have created custom Iview on portal for POWL. I can see my Powl application but when I select work item which contains all task ...and select any one of them it should open WD abap application but its not opening application and giving error.
    There is no iView available for system "": object "SWF_WIOBN" "
    Please see attached screen shot .
    Can any one tell me what is missing.
    Regards,
    Vijay

    Hi Guru,
    Any input..its urgent!.
    Regards,
    Vijay

  • Task details are not refreshed on task selection in BPM

    Hi All,
    I have a Notification project which is generated for the human task. In the BPM, when I try to select any of the tasks, it shows the task details of only one task. These are not being refreshed even after I choose some other task. The task details seem to be those of the first task. Can someone please suggest a solution? I am totally stuck here.
    Am I missing some setting here?
    Thanks,
    Divya.

    Hi Sam,
    I think you need to create an "Empty1.jspx" with the following code inside:
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
    xmlns:f="http://java.sun.com/jsf/core"
    xmlns:h="http://java.sun.com/jsf/html"
    xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
    <jsp:directive.page contentType="text/html;charset=UTF-8"/>
    <f:view>
    <af:document id="d1">
    <af:form id="f1"></af:form>
    </af:document>
    </f:view>
    </jsp:root>
    This should... for some reason.. auto close the taskflow
    Ross
    Edited by: Ross on 07-Apr-2011 08:48

  • HCM Processes and Forms: Work Item is not opening

    Hi,
    We are implementaing HCM processes and forms using NWBC (EHP7 - HR Renewal 2.0 FP1) and after using configuration of POWL inbox for MSS and HR Admin, We are not able to launch the Work Item.
    1) In MSS Work Book, while launching, we are getting message  -
    Failed to resolve Object Based Navigation target ".MSS_WL.NAVIGATE_FORM_WD". Use transaction PFCG to define this OBN target in a role or contact your system administrator to assign a role with the relevant OBN entries to your user.
    2) For HR Admin, we are getting message - Work Item can only be open using Portal and UWL. and it is displaying back end transaction SWNWIEX.
    Detail configuration steps are shown as below -
    Workflow Task used in configurations -
    1) Entries in IBO_C_WF_TA_P_SC  (Assign Task ID’s to POWL Types)
    2) IBO_C_WF_ACC configuration - (Define Tasks and Actions)
    3) IBO_C_WF_APC configuration (Provide Details of navigation parameters)
    4) IBO_V_WF_TTAC (Assignment of Actions to the Tasks)
    5) IBO_C_WF_TAC (Specify Default Action)
    Error -
    1) MSS -
    2)HR Admin -

    Hi Guru,
    Any input..its urgent!.
    Regards,
    Vijay

Maybe you are looking for