Workbook with 2 BEX queries

Hi all!,
I need to edit a new workbook with 2 querries.
Mi issue is when I change the parameter selection of the workbook, the result area of the first query does not adat itself to the new result and so there is spaces betwwen the 1st and the second query.
How can I define in the workbook to adapt automaticly the space for the query according to its result from the BEX?
Thank;s a lot!
Laurent.

I use the Version 7

Similar Messages

  • Create a View with two BEx Queries in BEx

    Hi Experts,
    I have got a scenario where in I have to create a single view on two BEx queries. Can any one give me the necessary steps to create the View?
    Awaiting for your reply,
    Thanks in advance,
    With kind regards,
    Shreeem

    Hi Shreem,
      I think that can be easily done. Check the below thread
    WAD - Integration of multiple queries
    Also see If you can include the two queries in a workbook and maybe later you can try creating a view on it?
    Thanks

  • Crystal Report with multiple BEX queries

    I have a Crystal Report that uses 6 different BEX queries.  The report needs to display the results from each query, there is no need to join these queries.  The Crystal Report is using subreports and displaying the data one BEX query after another.
    The issue I have is that these BEX queries all have the same mandatory variable.  This is causing Crystal to prompt the user to enter the same variable filter once per BEX query.  
    If we change the BEX queries so only the first BEX query has a variable and use Crystal to filter the other 5, the performance is unacceptable.  My guess is the other 5 queries are experiencing client side filtering instead of the filter being passed down to BW.
    Is there a way to have multiple BW queries with the same variable and have Crystal only prompt the user to enter input one time?
    Thanks,
    Andy

    Hi Andy,
    My understanding of the issue is :
    --You have 6 Bex queries and are displying on after the other becaused you have inserted all these queries as sub report.
    --All your Bex queries are having same parameter / prompt / variable which will take user input and filter the data.
    --Now the report is prompting the user to enter prompt / variable 6 times.  You are looking for an option to proimpt only ones insted of 6 tiems.
    If I understood correctly follow the method to link sub reports to grab the parameter value form main report parameter :
    Right click on sub report go in Change Subreport Links, select main reort prompt / varieable and then select sub report prompt / parameter / variable.
    Do the same for all your sub reports.  This will eliminate asking / prompting the same parameter value several times.
    Thanks,
    Sastry

  • Chart from data with two bex queries in crystal reports 4.0 for enterprise

    Hi,
    I'm fairly new to crystal reports and I have a requirement to show the data from 2 bex queries in one single cross table. is it possible ?
    after getting it i should be able to create chart with that data
    Eg: my table would be something like below :
                   calendar day
    Input     : 12      34     50     60
    Output  :  09     23     19     57
    Input Data will be coming from one bex query
    Out put data comes from another bex query
    is it possible to merge the dimensions and then work on ????         
    any help is much appreciated

    Hi Tanveer,
    The only way you can add two BEx queries in a report is using a Subreport. The First BEx query goes in the Main Report and the second one goes in the Subreport.
    You'll not be able to add the dimensions and measures from these two BEx queries in a Crosstab anyway. Perhaps, you could create a mock crosstab and send values (all rows) from the Main Report to the Subreport as a string however, I can see that it's going to get complex.
    -Abhilash

  • BW BEX Queries and Analysis Authorizations

    Hello....
    Have an opportunity with BW BEX queries and Analysis Authorization...would like to see if anyone has had the same experience and if so is there a answer....
    1) given a query....
    2) given a analysis authorization with a info-object that has intervals defined to be both single values and ranged values
    the following happens...
    after the query is fired the starter screen appears...the info-object in question appears with the defined single values only....if....the window is opened....again only the single values appear...the range values do not appear...once the query is executed the only results given are those for the single values...
    also if you re-fire the query and manually enter a valid value for the info-object that falls with-in any of the range values no result is given...even if there is data for it....the reponse given is no data found....
    NOW...if the single values, for the given info-object, are removed from the Analysis Authoriization then the range values appear and work....
    Is this a problem within in the query...or...is this a "feature" of the query...and thus must be "lived" with...
    Terry
    PS...this problem currently only happens if the window for the info-object allows for multi-selection....this problem does not occurr when the window only allows for one selection...

    Hi,
    This is a known problem with analysis authorization and multi selection IO selection criteria.
    When you define the analysis authorization with ranges and when you try to enter single values on the selection critera of the query, then the system shows zero data.
    You can run the query without entering any selection values for the IO in question only.
    I have tried several combinations and still encountering the same issue.
    Ravi

  • BEx Broadcaster - Using a Workbook with multiple queries on different tabs

    Hi,
    I was wondering if any has used Bex Broadcaster to broadcast a workbook that contains multiple queries on different tabs in the workbook.  I believe someone has mentioned that this was an issue in the past and I was wondering if this now a possibility with Bex Broadcaster
    If you were able to do this successfully, please let me know.
    Thanks

    Hello
    Of course it is possible.
    But, if you want to broadcast a workbook, you have to use a Precalculation Server.
    Without precalculation server, workbooks cannot be precalculated and broadcasted.
    More details, please check the note below:
    1461398          BW 7.X(7.20) Precalculation - General Info. & Limitations                              
    Best regards,
    Edward John

  • Parallel Refresh queries in a workbook with BI7.0

    Hi Experts,
    could somone tell me if is it possible to refresh IN PARALLEL all the queries in a workbook with 7.0 version? are there any differences from 3.5 Bex version from this point of view?
    This kind of option would be  very usefull for long run queries and/or big ammount of queries collected  in a workbook.
    I would be really grateful if you can give me link to documentation on this point.
    Thanks very much
    Best Regards
    Filippo Corvi

    Hi
    You are correct, if we put the big queries in a workbook it would be a performance issue.
    I have to check the option of refreshing the queries parallely.
    But you can try one option, the workbooks are also refreshed in Precalculation Server. If you can schedule that then the users would not have a problem.  May be I am wrong in this option. But it would be like refreshing the statistics before using them.
    If you can tryout, this is the help
    Note 936112 - Precalculation server help for troubleshooting
    Also this is one more option, but I had not tried out
    Schedule a Refresh of BEx Workbooks

  • Creating a workbook with seven queries- a question??

    Hi All,
             I am trying to create a workbook out of seven queries. I am also trying to keep the  title and free characteristics in the Workbook and be able to refresh with new filter values. But when I am running the query I am not seeing the free charateristics in the analyzer after running it. I think it can be done using the design mode function but need help which function to use. In a nutshell..
    1) I want this WB to have free characteristics after running the query along with title and embed six other queries into the same WB.
      How could this be done??
    Thanks for ur help.
    -Akash

    Hi Akash,
    Try using Insert navigation pane design item in each of your workbooks sheets, for the corresponding queries.
    Click on a cell where you want to place your free characteristics.
    Go to BEx Design toolbar.
    Click on insert navigation pane.
    Doble click on the cell , to define the properties of this navigation pane.
    Go to dimensions tab. Move the characteristics you want as free characteristics from available dimension to selected dimensions.
    Go to diplay tab, and allow all display check boxes
    To go back to report display, you can click on the (icon A in the design BEx toolbar), to switch off the design mode.
    Hope this is how you wanted it!
    Best regards,
    Sunmit.

  • Poor Performance 7.0 Workbook with multiple queries

    Hi all,
    I've got the following issue. Our users have workbooks which contain serveral queries on different sheets. (One on each workbook sheet)
    When a workbook contains 5 or more queries, the overall workbook performance will decrease drastically. Workbook with 8 or more queries result in time-outs and messages like unsufficient shared memory.
    Does anyone have the same kind of problems with multiple queries in a Bex 7.0 workbook? Do any one have a solution?
    Any suggestions are welcome.
    Thanks!
    Cheers,
    Ron

    Bill,
    Tried to make a workbook according to your advise. It certainly makes a difference in workbook size. The new workbook is 50% smaller than the older version based on the standard SAP template.
    However, my workbook contains 17 queries, and after 5 minutes it breaks the BW connection. So basic conclusion is that BW 7.0 workbook can't work with a large number of dataproviders/ queries.  This did work in BEx BW 3.x.
    If any one has any other suggestion, more than welcome.
    Cheers,
    Ron

  • Workbook with multiple queries on multiple tabs

    Scenario: There is a workbook with multiple queries on multiple tabs.
    In 3.x, it was possible to refresh only a select query within the WB but I'm not finding this to be the case in the NW04s BEx Analyzer. It seems that it will always refresh all queries on all tabs.
    Do any of you know a way around this?

    Hi Bigtoja (and others).
    This is not possible in BI/2004s.
    Please refer to https://websmp106.sap-ag.de/~sapidb/011000358700004483762006E page 23. It seems that it will be implemented in a stack sometime in 2008.
    BR
    Stefan

  • Workbooks with more than 12 queries

    Hi,
    I have a workbook with 11 queries.
    In each query, there is only one variable (same technical name).
    As a consequence, the whole workbook is refreshed automatically by filling only one variable screen.
    When I add 1 more query in this workbook, then 12 variable screens are displayed one after the other, with the same variable!
    Is there a known limitation with BEx 3.x / BW 3.5 that causes this problem with workbooks having more than 12 queries?
    Thanks and regards,
    John

    Hi,
    Check the below link forDisplay Duplicate Variables Only Once:
    variables:
    http://help.sap.com/saphelp_nw70/helpdata/en/54/a493f7256b43698191a2623e5a0532/content.htm
    Also check this forum:
    assigning same variable values for queries in workbook
    Hope this helps...
    Rgs,
    Ravikanth

  • Create a VC Model for BEx queries with Cell Editor

    Hello All,
    I am trying to create a VC Model for BEx queries with Cell Editor.
    BW Development Team has created a BEX query with complex restrictions and calculations using Cell Editor feature of BI-BEX.
    The query output in BEx analyzer is correct where all values are being calculated at each Cell level and being displayed.
    But, while creating VC model, system is not displaying the Cells.Thus, no VC Model can be created.
    I have executed below steps:
    1. Created a VC Model for BEx Query - ZQRY_XYZ
    2. Create Iview -> Create a dataService -> Provide a Table from the Output
    In the Column field system is not showing any of the Cells (present in Cell Editor)
    Please help me to solve this issue.
    Thanks,
    Siva

    Hi
    If 'Cell Editor' is been used then that query must have the structure in it. You have to select that 'structure' object in your 'VC Table'.
    If you select that then you will get the required result in the output. This structure will be the structure where 'cell reference' is used in BI query, You have to select that structures name.
    Regards
    Sandeep

  • Query not refreshing all data when run in workbook with other queries

    All,
    I have the following problem. I have a workbook that has two queries, one on each tab.
    The specific thing I notice that the company code is not showing up in the query at first until I hit refresh. Both queries use the same company code and user variables. When running the workbook I have each query set to "refresh query when running workbook". I have been able to duplicate this problem in either of the two queries, depending upon which company code variables I use. When I run the workbook, one of the two queries never updates company code variable unless I "refresh" the query directly after pulling up the workbook.
    I have changed the company code variable and used other company codes in each query, some required, some not, but ultimately a few of the key figures are not populating with current data and the company code is missing...unless I hit refresh on that query. I have tried creating new workbooks and removing and reinserting the queries, but this doesn't work either.
    And both queries run fine when executed alone.
    Again, Both queries use the same company code variable.
    Any help will be rewarded with points and is appreciated.

    Tasha,
    Remove the queries from the workbook and reinsert them. This should show the desired result.

  • Broadcasting a Excel Workbook with additional drilldowns

    I am trying to broadcast a Bex Excel Workbook by drilling down on couple of characteristics.  The Underlying workbook has already been set NOT to refer to the Queries Global Definition.
    So my problem is that when I broadcast this workbook after drilling down on the additional characteristics, it does not send it in the way I wanted, but it sends the workbook with whatever has been defined in the Bex Query (which is with no additional drilldowns). 
    I would like to know if there is way to add more drilldowns in the workbook and then distribute that workbook to the end users.

    No we don't want to save the workbook, becuase this is for the end user who wants to add a drilldown and then would like to send the output to his/her own email.   Basically end user should be able to add drilldowns to the workbook in the way he wants and wants to schedule the workbook in background using Broadcasting.

  • Marketing Segmentation Using BEx Queries

    My company wants to use the CRM Marketing Segmentation tool.  The data is coming from BW via BEx queries.  I've been able to create highly defined BEx queries that can be used by the Marketing Segmentation tool.  I'd like to create a more generic BEx query with prompts presented to the user at run time if possible.  For instance, if we need a list of Business Partners with email addresses, I want a prompt asking the user to select a specific division.  I haven't found any documentation that BEx prompts can be used within the Marketing Segmentation tool in this fashion.
    Thanks,
    Jeremy

    Hi,
    You can add multiple queries to workbook using following process:
    1. Open one of the queries in BEx Analyzer and save it as a workbook.
    2. Create additional tab in the workbook, and give it name as query2
    3. Edit the query2 tab by adding other quer. click BEx Analyzer > Tools > insert new query
    OR Go to BEx Analysis Toolbox: Tools > insert new query
    4. Chose the second query and save the workbook under appropriate role
    - Geetanjali

Maybe you are looking for

  • [JS CS2/3] where can i download ESTK 2

    I've written a script meant for ID CS2 on a PC on a mac in CS3, and now i need to do some platform specific debugging, so i need to run ESTK2 on Windows, but i can't find a download anywhere... UPDATE: OK, found it (looked at the Bridge SDK and there

  • X-Fi XtremeMusic = Headphones&Mic + Speake

    Hi out there! I need your help! Plz! I've got a Audigy X-Fi XtremeMusic installed and all works excellent! (I love the 24bit crystalizer ^_^d) But I'd like to listen to some music on my stereo and on the other hand I'd like to use some communication-

  • HT1338 Why can't I search in my toolbar anymore?

    I now have to open google up in a separate tab/window but I used to be able to just put my search straight into the toolbar. A small thing but it's driving me nuts! It seemed to happen after my son had been playing around on it.

  • Can you have different passwords for mail account and ICloud?

    Can you have different passwords for mail account and ICloud?

  • Account Verification email not received

    I have tried multiple times to log into mybestbuy.  Each time I am told I need to verify my account, and that an email has been sent.  I never receive the email.  I have already checked my spam folder. I have seen multiple other users reporting the s