Workflow bulider changed ,still the same workflow triggered for older requ

On applyig leave request a workflow is triggered and notification is sent to the
Manager he approves it
Everything is fine
Now I have changed the workflow builder
That after the approval, a task(Step) has to be performed.so I added a step for that
Now I have 3 cases
On applying for leave request the manager has approved and the step is executed after that
But my problem is now
There are a few prior requests which wernt approved yet
On approving them the workflow builder which is called is previous one and not the current one
And the step is not executed after the approval ,How to resolve the issue
Please advice
Thanks in advance

Hi,
If your workflow is a Event Based workflow, you can start the new workflow by raising the event manually again using SWUE. For this you need to know BO and triggering event , key of the object for your case.
If it is not a Event based workflow, you can start workflow by SWUS , providing all the mandatory and required container element values.
However, before starting you can delete/complete the existing workflow. To delete the existing workitems from user inboxes, you can use SWWL. If you also want to set the status of this workflow instance , then probably you need to execute few FM's to set the status to COMPLETED.
Hope this helps you !!
Regards
Krishna Mohan

Similar Messages

Fife days App Store not give it to me the verify code, I made I lot email adress, changed and create the new, still the same problem, and this is second one iPad that I bought this month, if not help me I don't know how to deal, thank you in advance

Fife days App Store not give it to me the verify code, I made I lot email adress, changed and created the new, still the same problem, and this is second iPad that I bought this month, if not help me I don't know how to deal, thank you in advance, maybe I will go to shop and want my money back

Do you have a technical question for us volunteer users?

Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

Mail app quits when opened after installing Mavericks. I reinstalled and still the same. I noticed the mail app icon has not changed to the new icon in Mavericks. Any suggestions?

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

HT4009 I can buy apps in the store but when i try to purchase in app purchase.. I cant buy it i try change my cc any anything still the same..

I can buy apps in the store... But when i try to buy in app purchases then i cant.. I have no restirction on it and i wonder why... I bought it before it was ok... But now even i try change my cc but still the same.. I can buy apps in the store but not in app.nit always tell me to contact itune support to complete the transaction.
I try create a new id to use itune giftcard.. I could buy the in app in the first try.. Then i rdeem more money into it afterthat i cant buy it anmore.. Same as when i use cc...
Anyone experience this ?

Yes I did. but still they dont know much. i just provide more information to them and i'm still waiting for the reply....
one thing.. i register a new account and use itune giftcard it in... i could purchase the inapp... after that i decided to buy more itune card. then after i redeemed it, i can't buy it again just like when i use my cc with my old account. it keep asking me to contact the itune support/ = ="

Hello..... i updated my iphone 3g (version 3.1.3) to ios4 (version 4.1) but i cannot change my background it is still the same black one!!! how can i change my background??????

hello..... i updated my iphone 3g (version 3.1.3) to ios4 (version 4.1) but i cannot change my background it is still the same black one!!! how can i change my background??????

You cannot. This is not a featue of the iphone 3G.
iPhone: Which iOS 4 software features does my iPhone support?

I receive a message indicating that my Apple ID is disabled . Although I've changed my password still the same problem exists.

I receive a message indicating that my Apple ID is disabled . Although I've changed my password still the same problem exists.

Mehrak88 wrote:
I receive a message indicating that my Apple ID is disabled . Although I've changed my password still the same problem exists.
Mehrak,
Messages like that are almost always phishing, and are not actually from Apple. Changing password does not affect it, since they can still send you the same email.
See this document:
Identifying fraudulent "phishing" email
Does it fit the description, or is it something else?

I'm trying to activate icloud. It asks me to verify my e-mail address by entering my username and password. It keeps refusing to accept my password. I've have changed the password twice now. Still the same result. What do I do?

I'm trying to activate icloud. It asks me to verify my e-mail address by entering my username and password. It keeps refusing to accept my password. I've have changed the password twice now. Still the same result. It did however accepted my password to join Apple Support Communites just now. What do I do?

I had the same promblem using my ipad2, I thought i was going crazy, then I noticed once when I put my user name in and checked it was right, one time it dropped the last letter of my U/N as went to hit submit so i went back put the deleted "m" back into ".com", hit enter, put in my password multiple times, tripple checked, no joy. So I hit remote on my iphone4s did the same UN/PW and it worked first time! I had the same promblem with accessing YouTube - I know I was putting the right UN/PW in but it wouldn't let me in, then miraculously one time it did... could be a letter dropping bug...

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated.

I updated Firefox and now it will not open at all. The hourglass shows that it's working but then nothing. I went to add/remove and removed mozilla and reinstalled it and still the same thing. It worked fine before I updated. Now I can't even remove the program at all. Why is this happening?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Still the same bugs?! (Ovi Maps, N8)

Hi!
I'm using Ovi maps lately quite a lot but I have some problems with this software, especially with the usability. When searching the net for bugfixes/help I found an older bug report on Nokia BetaLabs: http://betalabs.nokia.com/apps/ovi-maps-for-mobile-v3-06/bugreport/23781/top-10-bugs-in-ovi-maps-v-3... and my problems are still the same but Ovi Suite says that I have the latest version (v3.06, Map version 0.2.42.122 on N8-00)
My problems are:
1.) When searching for an accurate address (Street name, No., ZIP, City name) there is no hit for offline navigation, Ovi maps needs an online search. If I leave the house number out the offline navigation finds the street - Why aren't there the house numbers stored for offline navigation? There is mostly no sense in only finding a street but not the accurate address. As long as I only use the navigation inland that isn't a big problem as I have internet connection included in my phone rate - but it's a problem abroad because of high roaming rates ...
2.) So I have always internet connection on Ovi maps - problem is that sometimes when the UMTS-connection is lost (e.g.. in tunnels) there is a pop-up if I want Ovi maps to connect to the internet. If I choose "Yes" there is some seconds later a new pop-up where I need to choose the connection - That's very annoying! I can't find a setting like "always allow Ovi maps to connect to the internet". There is only a setting if I only want offline navigation (which doesn't work, see 1.).
3.) If there is more than one result I can't figure out what is the difference between the results (except the distance) because the exact address isn't scrolling and the results are only like "Country, State, ...." - I don't see the differences because there is only "...".
4.) I can't scroll through the map once the navigation has started. There is only this mode where I can scroll threw the turns/junctions. Sometimes I like to see where the navigation takes me before I start driving, that is hardly possible without a 'free-map-scroll-mode'.
One last point is the search-process: It is more comfortable to have a step-by-step search for the destination like all major satnavs have (TomTom, Garmin, ...) and bigger on-screen-keyboard because with this tiny letters it is quite impossible to add/change the address while driving.

AUTxRemoteC wrote:Now to the points from my first post:
1.) I've downloaded the maps via Ovi Suite on my mobile. Internet connection is only used for the search, but not everytime, it's only some kB but abroad some kB could be very expensive ;-)
2.) Thanks for this hint but everything was/is configured right as you said. This is more or less a general problem of my phone, maybe it has also something to do with my provider. Not only Maps asks regularly for the connection to use, other applications like the AR-Apps Wikitude and LiveView (from BetaLabs) but also some games are doing the same.
1. Maybe I misunderstand your question but I have no problem with searches right down to numbers in streets with the phone offline i.e the country, town, street, street number is found and the cursor sits over that exact address on the map. Perhaps it is a problem with your country's maps? In the countries I use the geo data is readily available right down to the individually surveyed plots of land in towns and cities (and hence to numbers in streets).
I often find it quicker to do a search for the country first if it is another country you are searching for the address in, then do the city, street number and name search.
2. I suspect that you have not barred such connections somewhere in the set up of your phone generally or else for for some app, or perhaps, as you have games, etc loaded, one or more of them insists on "phoning home" as some do and as they have opened a connection Maps asks to use it.
That with Maps 3.08 on an N8 but I do not recall any problems on earlier versions either.

HT1212 itunes error 0XE8000068 tried re install itunes still the same. laptop is brand new w windows 8

I bought a brand new laptop with windows 8 for OS. Downloaded & installed itunes but gives me error 0XE8000068 when I attached my iphone 5. windows is up to date. as well as iphone 5. Tried changing cables & restarting laptop, still the same. Uninstalled itunes & reinstalled again but nothing changed. Still the same error.
How can I fix this???

Something here might be able to help you: http://support.apple.com/kb/TS3221

My macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?

my macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Random Number being changed to the same number for all rows

hello all,
first of all I want to mention that this problem start happening after 2.14 instalation of Power Query.
I'm creating new column in my query and setting all values to random numbers. The problem is that next step (doesn't matter what it do itself) somehow changes all those random numbers to the same random number for all lines.
here's code sample:
InsertedCustom = Table.AddColumn(RemovedColumns3, "Random Number", each Number.Random()),
InsertedCustom2 = Table.AddColumn(InsertedCustom, "Analyst Full Name", each [Analyst First Name]&" "&[Analyst Last Name]),
when I'm checking step by step, InsertedCustom creates new column and all values are being set randomly for all lines BUT when going to the next step (InsertedCustom2) all values in the column "Random Number" are being changed to the
same number (no matter that InsertedCustom2 itself should not be doing anything to column named "Random Number") . I even tried moving InsertedCustom step to the bottom of my code but it didn't help and still facing this issue.
p.s. updated my PQ to 2.15 - didn't help

This is a known issue. Power Query assumes that functions are idempotent (given the same arguments, they produce the same result), which isn't true for Number.Random. Our optimization pipeline is turning Number.Random() into a constant in the scenario you
encountered, which results in all rows having the same value.
There's been some discussion of how to fix this, but that won't help you in the near term. Can you describe a bit more about your scenario and what you're trying to accomplish? Perhaps we can help you find a workaround.
Ehren

The signal still the same!!!!

I have the linksys wireless-G range expander model WRE54G, I setup every thing correct but the signal still the same no change what should I do to make it expanded

Try this -
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Expander, wait for 30 seconds and re-connect the power cable...
1. Connect your Expander to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on Ok button to Save and Click on "Close" on main Properties window...
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.240.
Leave the Username blank & in Password use admin in lower case...It should open your Expander set-up...
3. Once you get to the set-up page you can follow this link to change the Expander Settings...
4. While changing the Expander settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(Router and Expander)...Also make sure to change the Expander's default IP to match your network and Gateway Address should be your Router's address...ex. Expander's IP Address : 192.168.1.240(assuming your router's default IP Address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1...
5. After configuring the Expander you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Expander from the computer and power cycle both the devices(Expander and Router)...Your Expander should be configured...
In case if you don't get the Expander set-up just leave it connected to your computer and reset it for 30 seconds and follow Step 2, Step 3, Step 4 & Step 5...
Hope this helps.

My iphone 4s is not charging using wall charger. I can only charge it through my laptop and a desktop. I tried so many chargers already but it is still the same. Can somebody help me please...

My iphone 4s is not charging using wall charger. I can only charge it through my laptop and a desktop. I tried so many chargers already but it is still the same. Can somebody help me please...
My current ios is 6.1.3
I tried so many chargers thinking that my wall charger is defective. But still my phone is not charging. Its always through laptop and desktop only that i can do charging...help me please....
Thank you

Hello Regina0117
If you already try other chargers and still not working, the best advise is for you to contact apple support, if you still in warranty they will change it for you for free.
Start you case here:
http://www.apple.com/support/contact/
And contact apple support
Cheers, Lima

IPAD 4 screen flicker in App store as well as browsing via safari and vdownloader. I tried restore and reset, but still the same...

Hi everyone,
I just have my new Ipad4 last January 27, I noticed that while downloading a certain Apps in App Store then scrolling to look for more application, my screen would flicker like flashing or something blinking on it. I don't know what happened, why is it like that? Is it somewhat connected with hardware problem or does Ios 6 version still have a bug? I've tried using safari and other video downloader like vdownloader and I tried searching in youtube, still the same dilemma, it flicker also while browsing some video. Is it hardware problem? I already reset and restore my IPAD thou its a new one still the same dilemma happened again. What should I do? It was a gift for me and I'm really worried about it. Hope you could help me regarding it. Thank you so much.

Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Workflow bulider changed ,still the same workflow triggered for older requ

Similar Messages

Maybe you are looking for