Workflow for transaction FV50 is not working

Hi All,
I am new to Work flows. I need to trigger workflow when ever an document is posted/saved using the transaction FV50.
I habe created workflow with business object FIPP. But i am not getting any mail for the same. So can u please let me know do i need any configurations for the same.
even i am not getting some icon which we get for Va02 when a workflow is triggered. Can anybody guide me how to do the same.
Thanks in advance.
sagar.
Edited by: VidysSagar Reddy Sannala on Apr 20, 2009 9:43 AM

Hello,
1. Please check if you have Used the Event "Posted" of the object FIPP in the header of Workflow.
2. Also check if the binding is active.
You can also activate the bindings from T-code SWETYPV.
You can check whether the corresponding event is triggered or not from T-code SWEL (Event Trace).
Also you can try creating events using SWUE T-code.
Hope this helps.
Thanks,
Sowmya.

Similar Messages

  • HT1947 Remote for ipad landscape orientation not working in ios 7

    Remote for ipad landscape orientation not working in ios 7

    See this thread: remote app rotation locked in portrait orientation after iOS 7 upgrade
    It is a discussion only - no helpful hints.  Appears to be a bug for sure.

  • My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

    My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

    Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

  • I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

    I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...Re-Sync your Content
    Note:
    To remove a forgotten Restrictions passcode you will need to  Restore the Device as New...
    OR... From a Backup created Before the Restrictions Code was set....

  • Auto To working for one material and not working for other material

    Hi,
    Hope everybody is doing fine.
    I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
    I didn't setup the back ground processing job. Is that is affecting it?
    thanks for any help.
    regrads,
    KHAN

    Thnaks,
    You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
    Appreciate your time charlie

  • My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad.  I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

    My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad.  I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

    Hi there Lizabethfromaz,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Link for territory mgmt is not working

    Hi All,
    We have territory management configured for three custom attributes.
    Link for territory management is not working for territory assignment block on account overview screen.
    Any hint how we can solve this issue?
    Thanks and Regards,
    Gauri.

    How are you resetting the password?
    Resetting User Password in Lion, Mountain Lion & Mavericks
    Boot into your Recovery Partition by hold down the Command and R keys whilst booting.
    When the Recovery screen appears, go to the Utilities menu and open Terminal.
    In Terminal, type:
    resetpassword
    ...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
    Good luck,
    Clinton

  • Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi  ?p

    can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi  ?

    The problem is I cannot turn on wireless setting.  The "sign in to icloud  -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again.  If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work.  Vicious circle.

  • Valuation Basis for Different Payment (BWGRL) not working in 2010

    Hi
    We have a commission wagetype which we entered in IT 2010 in Number/Unit field. 
    Since we don't have premium id available, we used "Valuation Basis for Different Payment (BWGRL)"  to enter the RATE.
    This RATE is not working during our payroll run, however when we are using the wagetype with premium ID it is working fine.
    My question is- What could be the reason that the Valuation Basis for different payment is not working ? 
    I checked the wagetype in V_512W_B table and it has the following configuration-
    Current wage type
    Valuation Basis = BLANK
    Statement/WT = BLANK
    %Rate = 100
    1st derived wage type
    Valuation Basis = BLANK
    Statement/WT = BLANK
    %Rate = BLANK
    2nd derived wage type
    Valuation Basis = BLANK
    Statement/WT = BLANK
    %Rate = BLANK
    Would appreciate if the the fix could be provided.
    Saurabh Garg

    Hello,
    I think in your case for commision wagetype you need to modify rule $930 to process the override rate from Infotype 2010 BWGRL field in case you are using the US standard schema.
    The valuation basis table V_512W_D and rule $930 together will determine the valuation basis.
    The default valuation basis comes from table V_512W_D.In case you want to override the valuation basis rate defined in this table,you need to maintain override rate in It2010 and accordingly have the logic defined in rule $930 for that particular wagetype .
    Following is the sample rule definition for a similar scenario.
    ****(commision wagetype)
      NUM= ANZHL Set
      RTE= BWGRL Set
      RTE?0      Comparison
          MULTI NRA  Multipl.amt/no/rate
          SETIN X=NX Set variable split
          ADDWT *    OT   Output table
        =
          VALBS0     Eval.0.WT in 512W
          MULTI NRA  Multipl.amt/no/rate
          SETIN X=NX Set variable split
          ADDWT *    OT   Output table
    Regards,
    Malathi V.

  • Posting keys for account determination for transaction EXC do not exist

    hi
    i am doing Sales order for 1 month,no error i have got
    but now i am getting error
    Posting keys for account determination for transaction EXD do not exist
    HELP

    There will not be any such postings called FI side / SD Side.
    Positng always done in Financial perspective only into Certain G/L accounts depends on configuration we did.
    As we know,
    To post Invoice Conditions in G/L accounts , we configure Account Determination . These tables will be communicated through Account keys maintained in Pricing procedure & in Account determination tables.
    To account the stock in Inventory, will configure the same in OBYC - FI/MM Account Determination.- this will be triggered through Movement type - Transaction key / General modifier / Valuation calss / Valution group code n other factors.
    In your issue,
              Which Postings you are referring to?
    In SO creation, Controlling documents will be created ( Ref: COPA - Controlling & Profitablity Analysis Customization)
    After PGI in Delivery: Inventory will accounted through OBYC settings
    After releasing invoice to Accounting, G/L accounts posted through VKOA settings.
    Hope ,now you provide exact information related to your query

  • Posting keys for account determination for transaction EXD do not exist

    hi
    i am doing Sales order for 1 month,no error i have got
    but now i am getting error
    Posting keys for account determination for transaction EXD do not exist
    HELP

    Hello,
    I have following suggestion to overcome this issue.
    1. In the t-code "FTXP", check for assignment of the G/L account for the posting key.
    2. Check out the SAP Note:200348.
    3. In t-code "OBCN",for the account key EXD, make sure that the value of posting indicator is 2.
    4. In t-code OBYZ, for the tax calculation procedures, change the key to EXD. The account keys in tax pricing procedures and SD pricing procedures Should be same.
    Regards,
    Sarthak

  • Posting keys for account determination for transaction ERS do not exist

    Dear All,
    When I try to create an accounting document for a billing document, the below error happened:
    Posting keys for account determination for transaction ERS do not exist.
    Could any one of you meet the issue before and give me some advice? Thanks a lot.
    Ray

    Dear,
        In your pricing procedure check whether any sales deductions / discounts condition type is maintained and against that maintain ERS account key.
    and Go to VKOA and maintain gl account against your Kofi and KOFK for  account key ERS.
    try and let us know
    regards,
    SUdhir

  • New Hunt Pilot for internal number is not working.

    Hi support, I have a problem with the new hunt pilot number that created for internal use is not working. I had create 1 internal number (1090) for the Hunt Pilot number, and there are 2 hunt group member (9382 / 9387). These number will forward all to the mobile number 9382 will forward
    all to 90176253579 9387 will forward all to 90133921295 Calling from 1941 to 1090 resulted failed but calling from 1941 to 9382 working and the call forwarded to mobile 90176253579. What might be wrong with the 1090 where i can't call that number from internal. From the DNA, it shows the call should reachable to the destination. I attached the DNA result for your reference.

    Hi Mohd Afadzal,
    Forwarding setting do no apply for Line Group members. As you mentioned that the Line group members
    (9382 / 9387) are configured to forward all calls to their respective cell phones, this will not work.
    You can use the HuntPilot's Busy or No Answer configuration to forward calls to an alternate number.
    HTH,
    Jagpreet Singh Barmi

  • Can we get reimbursed for apps that do not work

    Can I get reimbursed for apps that do not work?

    Hi...
    You can contact iTunes support here and see if they will make an exception:
    http://www.apple.com/support/itunes/contact/
    They usually respond within 24 hours.
    Hope this helps.

  • Earlier installed flash player for x64 yet still not working

    Hello:
    Over the past 6months flash player installed and it's a working program, then a update comes
    along install that then you know it program  stops working.  I just uninstalled latest version  as it was not working
    I went back to dl.flash player square "beta preview, for windows X64.  Not working.
    Where,what is a user to do? I like learning from H.P. Learning which uses flash player so I really
    need to get Adobe Flash Player working a.s.a.p.
    thanks nedt

    Hi, The Square is a beta version and still in testing. You need to Uninstall it if you want the latest released version.
    Even tho you have a 64bit OS, you need to use the 32bit browser with any Flash Player version other than Square.
    Download and SAVE to your Desktop the Uninstaller:
    http://kb2.adobe.com/cps/141/tn_14157.html
    Download and SAVE to your Desktop the Installer(s)
    http://www.adobe.com/products/flashplayer/fp_distribution3.html   Use the EXE Installer for Win/IE and Win/plugin
    Use the Administrator Account
    Close all browser windows, disable any instant messengers in the system tray
    Disable any realtime anti-virus
    Run the Uninstaller and then reboot
    Run the Installer(s) and reboot.
    Reenable any that was disabled.
    Test here with browser(s)
    http://www.adobe.com/software/flash/about/
    You can print this out to make it easier.
    eidnolb

Maybe you are looking for

  • Abap report - consignment stock

    Hi Experts, when i select special stock = 'w' at the selection screen , all stock with 'w' and with blank will appear. when i select special stock = blank , all stock with blank appear. but i dunwan it to be like this. i want it to be, when i select

  • How to format 9 or 11 digit number with dashes

    Windows Adobe Pro 9. Someone please be kind and have mercy on me, I've researched this issue for 5 hours now and cannot resolve it on my own. I have a text field where the user will enter either a 9 digit or 11 digit number separated with dashes. If

  • Internationalization in flex

    Hello Members/Greg, I was trying to implement japanese locale in one of prototype. I probably did all the things to enable internationalization according to following links http://www.chikaradev.com/blog/?p=17  [thanks for this blog greg] http://labs

  • Why is WCDMA shown in logs when I have GSM

    Been trying to troubleshoot issues on my iphone 5 myself since calling apple or seeing a genius didnt help. For two days on oct 1 and oct 2 a lil more than halfway down in my awdd diagnostic logs its shows sys_mode: SYS_MODE_WCDMA. My question is if

  • Can't open CS3 file

    Often can't open CS3 files (I'm working in CS3). Then when the sender resaves in new file, problem is fixed. Huh? Am I missing a plug-in? How do I figure out which plug-in I'm missing? Is this even the problem?