Workflow giving unknown error in production

Hi Experts,
I had workflow working fine in dev and qa . But its not working in production .
I tried to execute the workflow directly through swdd.
It is telling 'Workflow cannot be activated' after executing .
When i tried to display the workflow log it says Unknown err(v1)
Kindly guide me in proceeding further .

Hi Martina,
I understand your problem.
Ok, while transporting make sure you transport first the workbench requests and then the Customizing requests.
Follow the procedure as below:
1. Go to t-code SCC1 in prod.
2. Select the transport request number and enter the source system as quality system (client)
3. Click on 'Including Request Subtasks.
4. Click on button 'Start immediately'
Do make sure before transporting that the TR includes all the tasks required for execution of the workflow.
After the TRs are transported go to SWDD and check if the workflow is in 'Active, Saved' status.
Regards,
Saumya

Similar Messages

Workflow giving 'unknown error' while executing in swdd in production

Hi Experts,
I had workflow working fine in dev and qa . But its not working in production .
I tried to execute the workflow directly through swdd.
It is telling 'Workflow cannot be activated' after executing .
When i tried to display the workflow log it says Unknown err(v1)
Kindly guide me in proceeding further .

This is waht i get ...i acnt get a clue from this .
   Execution of programs after import (XPRA)
   Transport request   : ND1K905351
   System              : NP1
   tp path             : tp
   Version and release: 372.04.04 700
   Post-import methods for change/transport request: ND1K905351
      on the application server: PROD
   Post-import method RH_ACTIVATE_WFOBJECT_AFTER_IMP started for PDWS L, date and time: 20090225145727
   Object requested is currently locked by user NC02
   Errors occurred during post-handling RH_ACTIVATE_WFOBJECT_AFTER_IMP for PDWS L
   RH_ACTIVATE_WFOBJECT_AFTER_IMP belongs to package SP00
   The errors affect the following components:
      BC-BMT-OM (Organizational Management)
   Post-import method RH_ACTIVATE_WFOBJECT_AFTER_IMP completed for PDWS L, date and time: 20090225145732
   Post-import methods of change/transport request ND1K905351 completed
        Start of subsequent processing ... 20090225145727
        End of subsequent processing... 20090225145732
   Execute reports for change/transport request: ND1K905351
      on the application server: PROD
   Reports for change/transport request ND1K905351 have been executed
        Start of................ 20090225145732
        End of.................. 20090225145732

HT201210 I have tried to restore my i phone via itunes after doing the update and it keeps giving unknown error occurred (3194) please help

I have tried to restore my i phone via itunes after doing the update and it keeps giving unknown error occurred (3194) please help

Hello Sam-marchesi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Best of luck,
Mario

HT1212 it is giving ,unknown error (3194), what should i do?

hi, My Iphone is giving , "iphone is disabled connect to itune.
i tryied all solutions mentioned and still is giving an error message "unknown error (3194).
so could i do? to solve this problem?Thx

Read here under Additional error codes and resolutions>Unable to contact the iOS update software server:
http://support.apple.com/kb/TS3694#error3194

Program giving syntax error in Production client

Hi Experts,
            I have moved an object into testing client its working fine there,but when it was moved from testing to production client.
            they are getting the error as "program ZSIOPCN contains syntax errors", when they are trying to create a variant in SE80 for this program from menu goto-->variants.
            Can anyone give any idea why this error comes, when the program is working fine in Quality client. Please give me suggestions,why it may happen.
all answers will be rewarded, Thanks in advance.
Thanks & Regards,
Poorna.

hi Rodrigo Paisante,
           i didn't understand the point "one or more objects wold be moved too", means moving the same object many times.
           we generally move the workbench requests in a sequence, in which they released. This transport sequence is follwed in the same sequence when moving from one client to another client.
           can you eloborate the solution and possible cause for this problem. i am getting message error DB: 242.
Thanks,
Poorna

Workflow giving "Suspended" Error on Calculated Columns- Sending Reminder Emails on List Due Date

I have created a list that has our reporting due dates plus calculated columns for 5 and 10 day reminders.
Example:
Due Date: 3/7/2014 1:00 PM
5 Day Reminder (Calculated Column= [Due Date] – 5): 3/2/2014 1:00 PM
10 Day Reminder (Calculated Column= [Due Date] -10): 2/25/2014 1:00 PM
As you can see in the list, it calculates the (5 and 10 day) reminder dates correctly in the list…
However, what I am wanting to happen is to build a workflow that will automatically trigger and send these reminder emails.
In SP 2013 Designer, I have my conditions set as:
I can go in on the list and set the workflow but once the due date/time comes up… The status changes from "Started" to "Suspended"-- I never receive a reminder email and I get the following error:
"RequestorId: ff5dac1d-ccee-ba1b-0000-000000000000. Details: RequestorId: ff5dac1d-ccee-ba1b-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP
500 {"error":{"code":"-1, System.FormatException","message":{"lang":"en-US","value":"String was not recognized as a valid DateTime."}}} {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["33"],"SPRequestGuid":["ff5dac1d-ccee-ba1b-8934-5a9d0c69d3c4"],"request-id":["ff5dac1d-ccee-ba1b-8934-5a9d0c69d3c4"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Tue, 25 Feb 2014 18:49:09 GMT"],"Server":["Microsoft-IIS\/8.0"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor
executor, BookmarkManager bookmarkManager, Location resultLocation)"
The string I have set up within SP Designer for the dates is:
If Current Item:Due Date
equals Today
If Current Item:5 Day Reminder
equals
Today
If Current Item:10 Day Reminder
equals
Today
Any ideas as to what I am missing?
Thank you in advance!
Amanda

Hi,
To start the workflow, we have three options:
If you select the “start the workflow automatically when an item is created” or “start the workflow automatically when an item is changed”, the workflow can be started automatically.
If you don’t, your workflow will never run, and therefore never wait till the date specified.
The “Pause Until Date” action causes a workflow to pause executing until a specified date and time.
If current day is equal to the specified date, it will execute the next step.
More information:
Workflow actions quick reference (SharePoint 2013 Workflow platform)
http://msdn.microsoft.com/en-us/library/jj164026.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

HT1692 iPod keeps giving the error "unknown error" when trying to sign in.Why?

iPod keeps giving "unknown error" when signing in. Why?

Signing into what?
Is "unknown error" the complete error number?

Media Encoder: "Unknown Error" : one solution

Queued encoding out of Premiere CS5.02 into the Adobe-updated Media Encoder 5.0.1 was giving "Unknown Error" messages (not particularly helpful) and failing to encode properly.
I re-installed the 5.0.0.402 version off my install disc (chose Premiere, then unchecked everything except Media Encoder) and that ran the queue again- no changes to compression settings, file settings or anything. Identical files, just earlier version of Media Encoder.
All 6 queued files compressed without error.
Except that now the sound was out of sync. Checked Premiere, and somehow, despite me being absolutely sure I only ticked "Encoder" on the re-install, it had reverted to 5.0 with its AIFF sync bug.
I then ran the DOWNLOADED 5.02 Premiere patch (NOT the Adobe Updater one which causes my Premiere to lose its extra compression settings and be unable to open previously saved CS5 projects- see here for more info).
Things now function fine.
This for me so far is the standout feature of my CS5 upgrade: bugs, flaky updaters, horrendous support, and a need to either revert updates or apply them in particular ways.
I wish you all better times.

Can you clarify what your problem is?
Is it that you need the 5.02 update to fix the AIFF sync issue, but that then breaks Media Encoder?
If so, you'll need to re-install Media Encoder. For me, this was choosing Premiere on my CS5 installer and deselecting everything except Media Encoder, but it seemed still to revert Premiere to v5.0 so I then had to run the *downloaded* Premiere 5.02 update.
Do not allow the Adobe Updater to update Media Encoder or you'll hit the same problem again.
If your issue was actually something else, then let me know!

Unknown error -50 (aperture photo sync issue)

OK.
iPod touch 16Gb connected to MB Pro. Aperture 1.5.x (latest).
The following happened:
1) In aperture I changed my preview for other apps jpeg quality from 6 to 10.
2) Next two times itunes tried to sync images to the touch it crashed (gave the unexpected error - report to apple crashreporter) in the "preparing images for the ipod" stage.
3) After that - it started giving unknown error -36.
So - I did a factory reset. Full reset to 1.1.2.
First sync after that it gave the "Cannot be synced - unknown error -50" at sync of photos.
Now - each time I try to sync it instantly gives the same unknown -50 error.
Now - the cable etc is OK - it all syncs fine if I turn off photo sync.
So - I am guessing that something somewhere in some disk cache or similar is probably screwed - the prepared photos - but - I have no idea where to look on disk.

OK - turns out the cache is in a directory called
iPod photo Cache
ref:
http://docs.info.apple.com/article.html?artnum=300225
http://docs.info.apple.com/article.html?artnum=301267
and several others.
The trick for people using aperture is that this directory is inside the aperture library file (the .aplibrary file).
Having removed this directory itunes is now regenerating the optimized photos

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Hello, i just downloaded itunes on my acer laptop and its been giving me problems everytime i try to get on to the itunes store.. it gives me a message saying "itunes could not connect to the itunes store. an unknown error occurred. (310).plz help me out.

hello, i just downloaded itunes on my acer laptop and its been giving me problems everytime i try to get on to the itunes store.. it gives me a message saying "itunes could not connect to the itunes store. an unknown error occurred. (310).plz help me out. i do have the internet on but it keeps giving me the same problems .. thanks..

Hi Young Prada,
If you are having issues connecting to the iTunes Store, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
- Brenden

I can't download an app or update ,It says ( the product distribution file could not be verified) in App Store ,and in iTunes says An unknown error occurred (-50) ?

Hi:all
I can't download an app or update ,It says ( the product distribution file could not be verified) in App Store
,and in iTunes says An unknown error occurred (-50) ?
Help Please.

See this link from another similar question. It may need patience to resolve. I think Thomas Reed's suggestion is best place to start.
App Store rejects buy of Mountain Lion: Apple Support Communities

TS3694 i cant restore my iphone and it kept on giving me this infor 'the iPhone 'iPhone' could not be restored. An unknown error occurred[1015]

i cant restore my iphone and it kept on giving me this infor 'the iPhone 'iPhone' could not be restored. An unknown error occurred[1015]

It's 99% sure theat the iPhone was hacked/jailbroken to use another carrier or downgrading IOS. There's no help with this.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
Message was edited by: ckuan

My elements 9 and 13 are giving me an unknown error message when I try to publish or share a finished project.

I have a finished project that I want converted to AVI or downloaded on DVD. My elements 9 would just shut down when I attempted this so I upgraded to elements 13 in hopes this error would be fixed. In 13 I get an unknown error message and then it shuts down. I need serious help.

connermac8
Important. This is not Adobe. Rather user to user. So, we have no control over or insider contact with Adobe on how it deals with its products or support for them.
We are fairly successful in what we do to share our work with others. If you wish to continue here, we are glad for the opportunity to be of assistance.
If moving forward...mini test run....
1. Move your source file which you describe as AVCHD.mts to a Local Disc C location like Video.
2. Open a new project to the Expert workspace, and import that AVCHD.mts file into the project with the project's Add Media/Files and Folders. When the video is
in Project Assets, drag it to the Timeline Video Track 1 and Audio Track 1. Is there an orange line over that content or no colored line?
3. Up to this point, have you gotten any Unknown Error message(s)?
If you are OK up to this point, I will ask for more details to fine tune the project settings. What I am presently not on firm ground with is the details of what you are trying to
import. In one instance you talk about AVCHD.mts file as the source and in another instance you talk about converting a project to .avi or a burn to disc product.
I am not 100% sure if you mean video file (likeAVCHD.mts) when you write project (meaning to me project file..prel). The difference would affect the troubleshooting plan.
Please review and consider. We need to be firm on the properties of what you are trying to import and from where in order to gain success. So, that is why I do not want to take
anything for granted.
Thanks.
ATR

SP2013 Customize Workflow Task Form with InfoPath 2013 - Unknown error occurred

Hi everyone,
After creating "Collect data from user" workflow using SharePoint designer, I need to customize the task form. But when I open the .xsn file (SharePoint generated), without editing anything (for testing purpose), and publish it, I got the message
box: "An unknown error has occurred. The form template has been published to the server but it can only be opened in InfoPath Filler". I test the same scenario in SharePoint 2010, and it worked. It really annoys me.
No exception in the log file, and no solution after much searching around.
Please help.

Hi john_d
I got the solution to customize the Workflow task form. We cannot customize the workflow task form from InfoPath 2013, and if some how you are able to publish the task form it then when you publish your workflow then it your workflow will overwrite
the default task form to your customized one.
So the solution for it is that whatever fields you want to add to the task form you can just in "TASK FORM FIELDS" and it will display in your task form when you publish your workflow.

Workflow giving unknown error in production

Similar Messages

Maybe you are looking for