Workflow message - No administrator for this task

Hello:
I got message " No administrator found for  this task"  when I double click workflow e-mail.
Please advise.

Hello,
If you execute a work item (And finish execution) then this work item
should no longer be in your inbox (Unless it is an asynchronous task
and it hasn't received its terminating event yet) and you should not
the option to Repleace. If it is an asynchronopus work item and
is still in your inbox and you try to reaplace then the message
5W 141 is correct.
Also check SAP note 1103387.
Regards,
David

Similar Messages

  • Releasing Mass Change Worklist-Error Message No Administrator for this task

    Using transaction AR01 we create a Worklist and assign it to the Substitution Rule.  When we use Transaction AR31 and try to Release the Worklist so that the actual Mass Change can take place, we get the following error message.  "No Administrator for this task".  We've tried a user id with SAPALL and still get this error message.
    Does anyone know what this means and how we can get around this message?

    We have this working in our Test system without having to set up any workflow tasks for Fixed Assets.  I'm wondering if this has to do with the Productive client settings.  We had to make some changes so that we could use transaction OA02 in a Productive client.
    Any suggestions would be greatly appreciated.

  • Error msg - not enough memory available for this task - chm file

    Hi All
    I am using RoboHelp for HTML 8.0 and creating chm file.  I am using context sensitive help and the F1 key functionality.  I have in the past created some map ID's with F1 and they have worked properly with our company software application.  Now, I have a different database with our company and a larger help file and it is not working.  I am told that the database should work.  I also have lots of memory.  I am working off of my hard drive which is where the .exe is for the company application and my chm file.  I can open my .chm file.  When I go into the application and press F1 where I created the map ID;s I get the message, not enough memory available for this task and also topic not available. Quit one or more programs to increase memory.
    I have lots of memory and my file is only 598kb.  I also only have RoboHelp and the application running.  When I did a search, I found an article for a fix from 2004 from Adobe - Rb_46124 - not sure if this is the fix but the steps dont match since it is old.
    Please help me.
    Thanks
    Caryn

    Hi there
    Actually, if you were to use FlashHelp output, you might find that the problems are compounded, as now you have the Flash Player and all its idiosyncrasies in the mix.
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

    My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

    Lynne130,
    to figure out which users have administrative privileges, open the Users & Groups pane of System Preferences; each user other than the Guest User will be shown with a description of either “Admin” or “Standard”. It’s typical for the first user created on a Mac to be an administrative user.

  • Mac OS X 10.7 drivers for HP LaserJet 1300: installation at the "Add Printer" process ended, every time, with message "Currently drivers for this printer are UNavailable..."!   PLEASE HELP?

    APPLE [see Apple Support's Article HT 3669] says Mac OS X 10.7 (Lion) has drivers for this Printer. 
    But, every time I've tried installing it to my Mac Book Pro (which came with OS X 10.7), it does recognize that the Printer (connected via USB cable) is HP LaserJet 1300 -- in fact, right below, this statement appears: "The drivers for this Printer are available...".  But, when it comes to the actual process of downloading, the "Add Printer" window -- after 20+ minutes of its "searching" for the drivers -- always ends with the message: "Currently drivers for this printer are UNavailable... contact the manufacturer."!!!  (Can you imagine? Apple says it's available... but its own "Add Printer" process says it's UNavailable!)
    I went to HP's support site, and it, too, says that drivers for this Printer are available!  -- see the 2 links:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&lc=en&cc=us&dlc=en &product=4152639
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02915680&tmp_track_link=ot_ faqs/top_issues/en_us/c02915680/loc:4&cc=us&dlc=en&lc=en&product=4152639#N507
    Can somebody help me?  Would very much appreciate it.

    You haven't installed any of the Photoshop updates for CS5.
    Go download and install the updates.

  • I am running CS6 on a 2014 21" IMac version 10.9.5.  I have an earlier version of Illustrator on CS4.  When launching the CS$ Illustrator the message says "License for this product has stopped working".  What can I do to get this to work?

    I am running CS6 on a 2014 21" IMac version 10.9.5.  I have an earlier version of Illustrator on CS4.  When launching the CS4 Illustrator the message says "License for this product has stopped working".  What can I do to get this to work?

    Mylenium,
    Before downloading CS4 again, how do I uninstall the versions that are currently on my Mac?
    Many thanks for your help!

  • How do you fix error message "data rate for this file is too high for DVD.  You must replace this file with one of a lower data rate".

    When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD.  You must replace this file with one of a lower data rate".  We need help to correct this so we can complete burning to DVD. 

    What did you export from Premiere?
    Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

  • I have uninstalled and reinstalled iTunes multiple times.  When I connect my iPod Classic I get the following message:  The software for this iPod is not installed correctly.  Please reinstall iTunes to install the required software.  Any ideas?

    I have uninstalled and reinstalled iTunes multiple times.  When I connect my iPod Classic I get the following message:  The software for this iPod is not installed correctly.  Please reinstall iTunes to install the required software.  Any ideas?

    Assuming you have windows, try uninstalling iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes.  You must follow this guide exactly or it will not be successful.  Note: uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.

  • Message submission rate for this client has exceeded the configured limit

    Hi,
    I got the below error when user try to send an email to more than 1 users from their application.
    host Exchange[exchange] said: 421 4.4.2 Message submission rate for this client has exceeded the configured limit (in reply to MAIL FROM command) <*@gibsonins.com>: lost connection with exchange[exchange] while sending RCPT TO .
    Please let me know the solution for this issue.
    Regards,
    Hakim.B
    Hakim

    Hi All,
    I have recently migrated my server from exchange 2010 to exchange 2013 and I am facing same issue here and have set message rate limit to unlimited and also checked the CPU.
    All looks normal then also the issue is there.
    I have tested the scenario on my system. Tried to send 10 mails in 1 minute and while sending the email at 9th one it gives error.
    "An error occurred while sending mail. The mail server responded:  4.4.2 Message submission rate for this client has exceeded the configured limit.  Please verify that your email address is correct in your Mail preferences and try again."
    Can anyone help me on this.
    Thanks,
    Ganesh Prajapati

  • I have windows xp. I downloaded quick time no problem still can't get itunes to install. Still get same message (a program for this install to complete could not be run).

    I have windows xp. I downloaded quick time no problem still can't get itunes to install. Still get same message (a program for this install to complete could not be run).

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Message too large for this organization.

    Ok this is driving me a little crazy.
    Organization Configuration -> Hub transport -> Global Settings -> Transport Settings -> Maximum Receive is set for 26MB (26624KB)
    Organization Configuration -> Hub transport -> Global Settings -> Transport Settings -> Maximum send is set for 20MB (21480KB)
    All  Receive connectors are set for 26MB
    Recipient User is unlimited.
    I am still getting the below error on an inbound from the internet message just under the 26MB limit
    RecipientStatus        
    : {550 5.2.3 RESOLVER.RST.SendSizeLimit.Org; message too large for this organization}
    TotalBytes             
    : 26325981

    Hi,
    I noticed that the error "550 5.2.3 RESOLVER.RST.SendSizeLimit.Org; message too large for this organization" is related to SendSizeLimit. Please change the Maximum send value to 26MB and check whether the issue persists.
    Organization Configuration -> Hub transport -> Global Settings -> Transport Settings ->
    Maximum send is set for 26MB (26624KB)
    Regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Winnie Liang
    TechNet Community Support

  • Keynote is in iTunes , the message is not for this type iPad . Will not download in either Macpro or iPad.  I thought I was buying product for MacPro?

    Keynote is in iTunes , the message is not for this type iPad . Will not download in either Macpro or iPad.  I thought I was buying product for MacPro? 

    To buy or install Keynote on a Mac, use the  Mac App Store application in the applications folder.
    If you have bought a new Mac, from October 2013 onwards, all the iWork applications are now free.

  • No Administrator for the TASK

    Hi All,
    Could you help me to resolve workflow issue. We have a workflow for PO release strategy. The agents are maintained in customized table. Now when I am adding a new agent in that customized table, the workflow is picking up the agent correctly but the he is not able to approve it as it gives the error "No administrator found for the task".
    Can somebody help me to resolve this issue.
    Thanks for your help.
    Regards
    Hema

    Hi Hema,
    It might be authorization problem. after displaying this message run transaction /NSU53 and check any authorization are missing. if yes then contact basis team and if message display like 'all authorization checks have so far been successful' then run transaction SWU_OBUF and press synchronize(shift + f1) then try again.
    Hope these helps.
    Regards,
    Parag

  • How to trigger a workflow message through EXIT_SAPLCOBT_001 for PP Ord Chg

    Hi Friends,
    Pls advise me here, heard that through Exit 'EXIT_SAPLCOBT_001' (PPCO0001) we can inform an MRP controller or a Workflow message when a production order is changed. I've tried with that but none am getting it.
    Pls help me how to use this exit and is there any other way to do a notification in my SWBP -Workflow?
    for order changes.
    regards
    Sankar.
    Edited by: sankar babu on Apr 10, 2009 9:03 AM
    Edited by: sankar babu on Apr 17, 2009 7:29 AM

    Hello,
    please check this :
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMPP/BCBMTWFMPP.pdf
    Regards,
    Martin

  • Officejet Pro 8600 Premium error message The drivers for this device are not installed. Code 28

    Printer : Officejet Pro 8600 Premium. model CN577A
    OS : Microsoft Windows 7 Home
    Basic 64
    How is your product connected to your PC? : Network
    Problem description : In Device Manager I've got an error message with the
    Officejet pro 8600 icon - "The drivers for this device are not installed.
    (Code 28)
    There is no driver selected for the device information set or element." I
    have uninstalled and re-installed the driver to no effect. The printer
    appears to be functioning properly.
    This question was solved.
    View Solution.

    Hello, 
    Yes, i too would suggest a clean re-installation of the software.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

Maybe you are looking for

  • Profit centre filter by factor description

    Dear All, We are using 2005 B PL 43. We have created a profit centre such as Code           Description BR001         Mumbai BR002         Chennai etc While using this option in JE  in Find text box if we type Chennai (ie., factor description) it is

  • Closing or cancelling series of purchase orders

    Hello Forum, I need to cancel or close lots of purchase orders. I was thinking of using dtw, but in the templates it doesn't seem to be possible to change a documents status? How to solve this? Thanks Chan

  • Printing reports using fop

    Hi: My java application creates reports using fop and xml. Currently, I am printing the reports to pdf files. Is it possible to send the report straight to the printer instead of first creating the pdf file and then printing the report? If it is, can

  • Masking Issue

    Hi,           I am trying to load a colour image and then it is changed to black and white image. Here I am using a mask. But it is not getting worked. The code that i am using for this purpose is attached following: import flash.filters.ColorMatrixF

  • OAS 10.1.3 isn't detecting /WEB-INF/lib jar files within WAR file

    Hello, I have been developing and testing a simple non-EJB web application on Tomcat 5.5 with no class loading difficulties for the past several months. All of the needed JARs for my app are located under the WEB-INF/lib directory. My next task is to