Workflow not updated or refreshed from BPM changes

Hi all,
My BPM Workflow seem to be stuck. All changes I make to my BPM (adding steps etc..) are not reflected in the Workflow.
I've refreshed the Cache several times (Deltas and Full)...
Activated Cache Notifications that were not started yet...
Manually Activated the BPM with SXI_CACHE
Re-activated BPM itself offcourse after each change///
..all to no avail..
Anyone any ideas ??
Cheers,
Eric

If u have made any changes in IP recently, then delete it from ID and reimport it.
Regards,
Prateek

Similar Messages

Ipod will not update new songs from itunes

My ipod will not update new songs from itunes. I've purchased several songs from the music store, updated my playlists and as added some from my CD collection and they are not transfering from my library to my ipod.
I've tried numerous configurations under the preferences - ipod menue but still can't get them to transfer.
One error I occasionally get is "ipod cannot be updated because there is not enough free space to hold all of the songs in the itunes music library"
There is plenty of room on my ipod so I can't figure out why. It almost seems as if it is trying to copy all of my songs not just the new ones because all songs in my librbary are checked.

Thank you for responding.
Doesn't it have to be on either manual or auto update? What other option is there?
I will try downloading latest updates.
I know it will work if I reset it (have done it a few times already). I just hate having to restore factory settings everytime I want to put a new song onthe ipod.

HT201210 My iPhone will not update or restore from iTunes. It's frozen

My iPhone will not update or restore from iTunes. It's frozen

You may be in a recovery mode follow this article http://support.apple.com/kb/HT1808
If you have a backup you can restore your contents by following this article
http://support.apple.com/kb/HT1414
Good Luck!

I have a 2nd generation iPod touch. I have not updated the software from version 2.2.1. When I connect to iTunes to update to 4.2, I keep getting an error message. Has anyone else had this issue and figured out a way to fix it?

I have a 2nd generation iPod touch. I have not updated the software from version 2.2.1. When I connect to iTunes to update to 4.2, I keep getting an error message. Has anyone else had this issue and figured out a way to fix it?

Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
-1 error
-1 error too

Keynote document saved in icloud not updating with data from Numbers? is icloud the problem

keynote document saved in icloud not updating with data from Numbers? is icloud the problem.
If both files are held locally on the computer it looks like there is no problem however if you try and do it though icloud (ie your docs are saved on icloud) you dont get the "source" oprion besides the graph etc. Is this a but or a broken function due to the new implementation of icloud.

Hi sebnor31,
This is Visual C# forum, but your question seems not related to Visual C# language itself. It most likely related to the bluetooth message transaction protocal or with the device itself.
I'll move your question to [where is this forum for...] forum where the morderator may direct you to the correct forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

HT4623 my 2nd. generation ipod will not update the software from 2.2 to 4

my 2nd. geration ipod will not update the software from 2.2 to 4 or 6.

Are you sure you have a 2G? A 1G can only go to 2.1 via iTunes but a 1G can go as high as 3.1.3 that you get here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
Identifying iPod models
To If you do have a 2G that can go to 4.2.1 by:
iTunes: Backing up, updating, and restoring iOS software
For 4.2.1 you need iTunes version 10.X and that requires OSX 105.8 or later.
If you have 10.4.11 you can only go to iOS 4.1 since that OSX can on go to iTunes 9.X

HT1338 why can i not update my software from 10.6.8

why can i not update my software from 10.6.8?

Because there are no updates beyond OS X 10.6.8.
If you want to upgrade to a later version, you have to buy it. Mountain Lion is $19.99 US.

Does iPhoto update a gallery from the changes to the album?

When I create a web gallery I first create an album and drag photos into to. I do this in part because I also use my Apple TV to play a slideshow of albums. When I publish a web gallery of an album it uploads it just fine.
But when I add a photo to the album, it doesn't make the change in iPhoto to the gallery or online. Do I have to make the changes in both locations? That seems like extra work. Doesn't iPhoto update the galleries from the albums that created them?

Welcome to the Apple Discussions. Only photos added to the actual web gallery in iPhoto will be added to the online gallery when updated. The album you use to create the gallery is not connected in any way except as a convenient way to group the photos initially and start the gallery. You don't need an album to create a gallery.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Data not updated in business entity after change in architectural object

Hi,
A business entity was created from Architectural Object.
When we modify the address in the architectural object, the data is not updated in the business entity.
Is there any solution that make an automatic update for the address in business entity after a change in architectural object ?
Thx for your help.
Regards
Saad

Hi,
I have created new infopackage and ran. Now the following message I have got on the monitor.
"Data not received in PSA Table
Diagnosis
Data has not been updated in PSA Table . The request is probably still running or there was a short dump.
Procedure
In the short dump overview in BW, look for the short dump that belongs to your data request. Make sure the correct date and time are specified in the selection screen.
You can use the wizard to get to the short dump list, or follow the menu path "Environment -> Short dump -> In Data Warehouse".
Removing errors
Follow the instructions in the short dump."
Any more thoughts?
Thanks,
Rao.

Report Map Section not updating after refresh

Hi
I have created a section in my report based on employee. After executing the report for the first time the report map shows the section and each employee for which a section has been created.
The is really useful as you can use the report map to navigate directly to info for a specific employee.
When I refresh the query and select a different cost center a new list of employees is presented in the report, however the report map is not refreshed to relect this new list of employees.
Is there a separate step to get the report map to update the sections for the changed variable selection? (In this case I selected a different cost center and as a result got a new list of employees)
Thanks
Ian

A few things I would suggest you do to determine where the problem lies.
1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
Good Luck,
-John

Transparency effects are not updated on frame's content change(shardow, etc.)

Hello everyone.
I've faced the following problem:
My shape, which is based on CGraphicsFrameShape and kSplinePageItemBoss does not update it's transparency effects after changing own content.
The content is drawn by AGMImageRecord and IGraphicsPort::image. I also use IXPUtils::CreateImagePaintServer,IGraphicsPort::SetAlphaServer for drawing image with some transparecy mask ( the idea is stolen from SDK's sample "Transparency effects" ).
When user sets some transparency effects, and then changes the content of the shape - the effect (eg. shadow) presists from the previous content. It is updated (sets as a shadow for current content) only when user resizes the shape.
I tried Inval method, DrawPageItemAdornments method, InvalPageItemAdornments method, but nothing works - the shadow still gets updated only on frame's resize.
What can be done, and what guru do in such cases?

And one more moment - this happens only when display performance is set to "typical". When "high quality" is set - everything updates well.

Symbol Properties panel not updating or refreshing

Y'all,
I'm running FW CS5 under Windows 7 Pro (64-bit), and my Symbol Properties panel has stopped updating when I select a symbol to modify. I have to close and re-open the Symbol Properties panel to force it to refresh.
If I have the panel open and select a symbol on the page, the panel remains blank.
If I have edited a symbol then deselected it, that symbol's properties remain visible in the Symbol Properties panel after the symbol is deselected.
If I have edited a symbol then select another symbol, the first symbol's properties remain visible in the panel and it does not update to show the properties of the newly selected symbol.
In all cases I must close and re-open the Symbol properties panel to force it to refresh and update.
I've also noticed two other peculiar refresh problems lately - when the rulers are visible and I either zoom in / zoom out on the document or change the application window size, the top ruler often vanishes. I have to minimize then maximize the Fireworks application window to force a refresh and get the rulers to re-appear.
Finally, the little document info boxes at the lower right corner of the canvas showing document size and zoom level often go blank or vanish when I either zoom in / zoom out on the document or change the application window size. I have to minimize then maximize the Fireworks application window to force a refresh and get the info boxes to re-appear.
It seems that the problem may be related to some larger Fireworks screen refresh problem. It did not behave this way when first installed - it began happening recently, and the only thing that has changed was a minor update to all of the CS5 design tools (including FW) about the way that image metadata is handled.
Is anyone else experiencing odd refresh errors? Is it possible that an extension could cause this?
Any help and advice would be appreciated, because it has become really cumbersome to use component symbols.
Thanks,
Dave

After digging around and looking at what has been updated or installed on my computer since these weird refresh problems began, I may have identified a possible cause.
Adobe installs the Java runtime with the Creative Suite (I'm not sure why, but it's there), and a few weeks ago the 1.6.20 update installed itself, but it failed multiple times before installing, then Windows 7 informed me that a component was improperly installed with the incorrect privileges. Last night the 1.6.21 update installed itself without any errors, and this morning Fireworks seems to be working normally again.
I'll keep monitoring FW for weird refresh problems, and if they return I'll post an update. It is possible that the 1.6.20 update broke something that was fixed by the 1.6.21 update.
Can anyone tell me why the CS programs require Java and what it is used for?
Thanks,
Dave

Outlook 2013 - Meeting Tracking is not updated when a meeting is changed in a shared calendar

Hello,
we have troubles in our Outlook 2013 environment.
We changed from Outlook 2003 to Outlook 2013.
We have Exchange 2007 in background.
We have Outlook 2013 in Cached Mode.
Problem description:
A secretary changes a meeting in a shared calendar of one of her bosses/colleagues. The colleague (organizer of meeting) gets responses of the attendees (aceptet, tentiative, denied) in his Mailbox. When he looks into the meeting to check how many persons
have acceptet the meeting, he founds out that the tracking is not update.
I found out in my first solution steps, that this occurs, when the meeting is changed in a shared calendar. When I change th meeting in my own calendar, it works. But we need a solution for the problem, because our secretaries are managing the meetings for
some colleagues.
Thanks for help,
BR, David
David Strutzenberger

Hi,
For your situation, please try the following steps:
1. Please install the lasted update for Outlook 2013, and then check the issue.
2. Check if the AutomateProcessing calendar setting for your Microsoft Exchange Server 2007 is set to
None.
If so, please make sure the Exchange Server administrator start the Exchange Management Shell on the Exchange mailbox server.
Then, run the following command in the Exchange Management Shell:
Set-MailboxCalendarSettings username -AutomateProcessing Autoupdate
Where username is the affected user's alias.
3. Switch to Online Exchange mode to test the issue.
Best Regards,
Steve Fan
TechNet Community Support

SharePoint 2013 Workflow Not Updating on Deployment

Developing a 2013 Workflow on SharePoint 2013 using Visual Studio 2012, deploying workflow changes does not update the workflow that runs. This has already been posted on the SP 2013 dev forum, but I wanted to check here with the workflow folks. Anyone run
into this issue before and/or have tips for solving?
Thanks.
http://social.msdn.microsoft.com/Forums/en-US/sharepointdevelopment/thread/cd543a00-f3ab-4a4a-8682-b81d8330b677
http://blog.randomdust.com

This issue is reported and I'll post about it once I have an update. For now to workaround this issue, you can try these steps
Change the default deployment option to “No Activation”
Retract the solution using Visual Studio
Deploy the solution. This time feature will not be activated by default as we have changed to “No Activation”
Open the SharePoint designer and click on the “Workflow” section. You will see your workflow already present there. Delete the workflow which you have created.
Activate the feature manually.
Now you should see your updated version.
Chandrasekar Natarajan

SPD workflow not updating a Lookup Column

I have a 2 lists (Computers & Lending Library) that both have a look-up column (Item Status) pointing to a 3rd list (Item Status - Category).
Both lists are properly looking up when manually edited via the web interface. When I try to use a SPD workflow to "Update or Create List Item" and I set the column in the Lending Library (Item Status) = Current Item (Items Status) the column is not populated.
I took the same value and updated a Text column and the value is "0".
The strange thing is when setting the (Item Status) it only gives me the options:
As Integer
Lookup ID (as Integer)
Lookup Value (as Integer)
What am I missing?
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Its been a long time since I looked at this but yes we did figure it out.
Here is my Comment to myself on the lookup: "Must extract the [Item type] as a string and then lookup the corresponding List Item [ID] in the "Item Type - Category" list, use that value to update the "LendLib"[Item
Type]."
As suggested you need to reference the ID of the lookup, and I am caching that. Then when setting the [Item Type] column, by referencing the [ID] column in the Lookup list, then set your value to the Title of that lookup.
If I recall the issue was the lookup, if you don't use the [ID] then you don't actually retrieve the value from the [Title] column correctly.
My screenshots below are a bit confusing at first because my Lookup List is called "Item Type - Category" and the column in the 2nd list that is the
Lookup Column, is called "Item Type".
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Workflow not updated or refreshed from BPM changes

Similar Messages

Maybe you are looking for