Workflow Notification Mailer in Non-Prod

Hi,
Does anyone have any suggestions on the best way to setup notifications in Non-Prod environments so there is not confusion with Production EBS notifications?
Thanks in advance!

Change the Message Generation configuration of Workflow notification mailer
Navigate :
System Administrator --> Workflow --> Notification Mailer --> "Stop the services" --> click "Edit" --> Click "Advanced" --> Click "Next" and go to "Message Generation"
--> change "From" (eg.) PROD Workflow Mailer to "TEST Workflow Mailer" --> Click "Finish" --> Start the Services again.
Thanks,
Narasimha Rao

Similar Messages

Workflow notification mailer not starting after APPS pwd change

Workflow notification mailer not starting after APPS pwd change
The error in the WFMAILER log is
[appprod@nalinoes04 ABPROD_nalinoes04]$ cat WFMAILER1300061.txt
wferr:
- WFXXX_DB_CONNECT CODE=1017 CONNECT=APPS
cpid=1300061, logfile=/abprod/comn/admin/log/ABPROD_nalinoes04/WFMAILER1300061.txtparams=, status=Running, debuglevel= Error Done.[appprod@nalinoes04
Can you please advice ?
EBS 11.5.10.2
DB 11.2.0.1

There is no upgrade, just a usual APPS password changeYou still need to bounce the application services.
The error you have posted above does not tell much about the issue. Please clear the log file, reproduce the issue, and check the log file then.The FNDCPGSC log file
[Oct 23, 2012 12:42:42 PM CDT]:1351014162195:Thread[BES Dispatch Thread,5,main]:0:-1:nalinoes05:172.25.80.54:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-1327162 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.76 2004/07/27 17:30:17 kkapur ship $ @16720915 {oracle.apps.fnd.profiles.ExtendedProfileStore@9980d5}],mUniqueId=SVC-GSM-WFMLRSVC-1327162,mLevel=4}, oracle.jdbc.driver.OracleConnection@76ab2f, 10006, DEACTIVATED_SYSTEM, This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=N, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:XXAB_OPEN_IBE_WF_MAIL, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_!08^@@690^6@6$$^#9^#6#!0$04868!@$^86$!!`}0$8|&%%+++|9|*@, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESSED, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, ACCOUNT=svc_oracle_mail, DISCARD=DISCARD, FROM=ACCO Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://nalinoes04.abd.ad.acco.com:8000/pls/ABPROD, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=lin-hera.na.acco.com, OUTBOUND_SSL_ENABLED=N, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, MORE_INFO_ANSWERED=WFMAIL:MORE_INFO_ANSWERED, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=5, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=Y, OUTBOUND_SERVER=nalinoes04.abd.ad.acco.com, INBOUND_SSL_ENABLED=N})
Please see these docs.
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
Thanks,
Hussein

Workflow notification mailer not working properly

Hi,
I got the following error and I have restart the services but still facing the same problem, Please advice
Definition
ID 10006 Name Workflow Notification Mailer
Startup Mode Automatic Container Type Oracle Applications GSM
Inbound Agent Workflow Notification In Queue Outbound Agent Workflow Notification Out Queue
Correlation ID
Status Information This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=Y, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=NONE, PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:OPEN_MAIL_FYI, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_@@#$@4@8$@8#0488$89668$$@98!8$6@@0#9@9 `99%@*B+#B&|8B*^&, HTTP_USER_AGENT=Mozilla/4.76, RESET_NLS=N, PROCESS=PROCESS, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, [email protected], DISCARD=DISCARD, FROM=Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=200, HTMLAGENT=http://erp.arabtecconstruction.com:8009/, INBOX=INBOX, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=mail.arabtecuae.com, OUTBOUND_

Please post the details of the application release, database version and OS.
Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Please see these docs.
Unable To Make A Network Connection For IMAP Username/Password In Workflow Mailer Configuration [ID 784247.1]
Workflow Cannot Connect to IMAP Sever: "Unable to Make a Network Connection" [ID 577592.1]
Error Validation Error Has Occurred: Unable To Make A Network Connection During Mailer Setup [ID 834054.1]
How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
How to Troubleshoot 'Validation failed' Errors when Starting the Mailer [ID 463354.1]
Unable To Connect To The Mail Account. Check The Host, User Name And Password [ID 1123684.1]
Workflow Mailer Will Not Start Stays In Starting Status [ID 837893.1]
Mailer cannot Connect to IMAP Server on Oracle Applications R12.1.1 [ID 1300542.1]
Java Mailer not Starting Error in Handling Component Event [ID 297725.1]
Inbound Processing Is Not Happening While Approving/Rejecting From Emails [ID 418931.1]
Unable To Start Notification Mailer After Upgrade To 10.2.0.3 [ID 725852.1]
Thanks,
Hussein

How to configure Workflow Notification Mailer for oracle alert in R12

Hi all....,
How to configure Workflow Notfication mailer for oracle Alert in R12. Please provide the complete steps.. Its urgent.. Plz help me..
Regards ,
Madhan

Duplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer

Workflow Notification Mailer error

Hi all,
I am logged in Application Manager and it shows that Mailer "Stopped with error".
Service Instances for Generic Service Component Container shown as running.
Here is what I see in Mailer Details:
Definition
     ID          10006          Name          Workflow Notification Mailer
     Startup Mode          Automatic          Container Type          Oracle Applications GSM
     Inbound Agent          Workflow Notification In Queue          Outbound Agent          Workflow Notification Out Queue
     Correlation ID
     Status Information          This automatic Service Component has been restarted the maximum of 10 times after stopping with error. Thus, it has been system deactivated -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {OUTBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, AUTOCLOSE_FYI=N, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=Y, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, TEST_ADDRESS=, EXPUNGE_ON_CLOSE=Y, PROCESSOR_OUT_THREAD_COUNT=1, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:OPEN_MAIL_FYI, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_6#986$!0# `+$!**^^A8&@^8^00@%!0&B8%B}#A*|^#, RESET_NLS=N, HTTP_USER_AGENT=Mozilla/4.76, PROCESS=Process, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, DISCARD=Discard, ACCOUNT=spi\workflow, FROM=Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://finappstest01kt.seattlepacificindustries.com:8001/pls/SPIUAT, INBOX=Inbox, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=10.0.4.44, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, INLINE_ATTACHMENT=N, OPEN_INVALI
Where do I need to look for a resolution?
Thanks,
Eugene

Hi,
Have a look at the following documents.
Note: 463354.1 - How to troubleshoot 'Validation failed' errors when starting mailer
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=463354.1
Note: 753845.1 - How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer Issues
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=753845.1
Note: 257723.1 - Error SvcComponentContainer
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=257723.1
Regards,
Hussein

Problem :Workflow Notification Mailer

i couldn't start the workflow Mailer Services.
Querying
SELECT component_name, component_status
FROM fnd_svc_components
WHERE component_type = 'WF_MAILER';
COMPONENT_NAME
COMPONENT_STATUS
Workflow Notification Mailer
STOPPED_ERROR
Finally after 10 automatic retry attempt ,the Status changes to Deactivated by system
The log file data
[Aug 2, 2013 7:14:45 PM GMT+05:30]:1375451085517:Thread[BES Dispatch Thread,5,main]:0:-1:ibmapps:10.36.0.13:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-4383432-10040 : oracle.apps.fnd.cp.gsc.SvcComponent.start(int, SvcComponentContainerInterface)]:Validation failed for the following parameters -> {INBOUND_SERVER=Unable to make a network connection., TEST_ADDRESS=The test address can not be the same as the Reply-To address}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, AUTOCLOSE_FYI=N, INBOUND_PROTOCOL=IMAP, PROCESSOR_READ_TIMEOUT_CLOSE=Y, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, [email protected], EXPUNGE_ON_CLOSE=Y, PROCESSOR_OUT_THREAD_COUNT=1, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:OPEN_MAIL_FYI, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=, RESET_NLS=N, HTTP_USER_AGENT=Mozilla/4.76, PROCESS=PROCESS, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, DISCARD=DISCARD, ACCOUNT=utta.muk1989, FROM=Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://ibmapps.appsibm:8010/pls/DVP, INBOX=INBOX, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, INBOUND_SERVER=imap.gmail.com, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=4, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=N, OUTBOUND_SERVER=ibmapps.appsibm}
How to configure of INBOUND Server

As you have given the INBOUND_SERVER value as 'imap.gmail.com' you should specify the GMail user name and password for Inbound account say(eg:abc) and password field.
The replyToAddress and TestAddress should not be same. You need to provide the GMail email address here foe eg: [email protected]
The server 'imap.gmail.com' is SSL enabled you need to instal the corresponding certificate in the instance concurrent and web tier nodes.

How to enable workflow notification mailer and how can it help me?

Hello
I am on 12.0.6
I want to know how to enablke workflow notification mailer and how it can help me?
Do i need to seperately license it?
is there any patch that i have to apply in order to use it
Please advice and help me with my query

Hi,
I want to know how to enablke workflow notification mailer and how it can help me?See the documents referenced in this thread.
Workflow Configuration and Troubleshoot
Workflow Configuration and Troubleshoot
Do i need to seperately license it?No.
is there any patch that i have to apply in order to use itSee the thread referenced above.
Regards,
Hussein

Workflow Notification Mails Are Not Being Sent

Hi
we are running 11.5.10.2 version , some times Workflow Notification Mails Are Not Being Sent , so how should i start diagnose this issue.
Regards

Dear Hussein
thanks for your reply, below are the log messages from the todays file FNDCPGSC6854.txt
[May 12, 2009 1:21:12 PM AST]:1242123672450:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2LXZhNin2K0g2LXYp9mE2K0g2LnYrNmE2Kf
Zhg==?= <[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for client input
[May 12, 2009 1:21:12 PM AST]:1242123672451:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 2:03:48 PM AST]:1242126228129:Thread[inboundThreadGroup1,5,inboundThreadGroup]:0:-1:DAREB
S:172.30.2.45:-1:-1:UNEXPECTED:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.IMAPInboundProc
essor.moveMessage(Message, String)]:Unable to move message {null} -> javax.mail.StoreClosedException: *
BYE Microsoft Exchange Server 2003 IMAP4rev1 server version 6.5.7638.1 closing connection due to timeo
ut.
[May 12, 2009 2:17:01 PM AST]:1242127021657:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2YXYp9ix2KrZhiDZgdmG2YrYsg==?= <mvi
[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for client input
[May 12, 2009 2:17:01 PM AST]:1242127021658:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 3:49:02 PM AST]:1242132542705:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProces
sor.send(Message)]:Problem encountered when sending to {[[=?UTF-8?B?2KfYtNix2YEg2KfZhNiz2YrYryDYp9it2YX
YryDYtNio2YQ=?= <[email protected]>]]} -> javax.mail.MessagingException: 451 Timeout waiting for clie
nt input
[May 12, 2009 3:49:02 PM AST]:1242132542705:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:ERROR:[SVC-GSM-WFMLRSVC-6854-10006 : oracle.apps.fnd.wf.mailer.SMTPMessageHandler
.sendMessages(String)]:MessagingException -> javax.mail.MessagingException: 451 Timeout waiting for cli
ent input
[May 12, 2009 4:03:08 PM AST]:1242133388437:Thread[outboundThreadGroup1,5,outboundThreadGroup]:0:-1:DAR
EBS:172.30.2.45:-1:-1:UNEXPECTED:[fnd.wf.mailer.URLMIMETagListener]:oracle.apps.fnd.wf.mailer.URLMIMETa
gListener.editStyleRef(HTMLTagEvent, String) Making a connection to {http://oracle.kannon.com:8000/OA_
HTML/cabo/images/cache/cmbts.gif)} returned {404 - Not Found}. Leaving as a reference

One user not getting Workflow Notifications Mail

Hi
We are using Oracle11i (11.5.10.2) on windows 2000 server.
One of our user complaining that he is not getting any workflow notification mail to his maild id.
How can we fix and troubleshoot this issue?
Thanks
OH

Hi,
Is the issue with this specific user?
Can you find any errors in the Workflow log file?
Please see if any of these documents is applicable.
Note: 743567.1 - Email Notifications are not Sent, and Mailer Log File Shows Error "Replyto Must Be a Valid Email Address"
Note: 423405.1 - Not Receiving Workflow Email Notifications
Regards,
Hussein

Workflow Notification Mailer

Hi
Can anyone advise as to how I would set up Workflow Notification Mailer to simply send mails to a single account as opposed to EVERYONE?
I need to do this for both INBOUND and OUTBOUND notifications.
please help.
Thanks

969654 wrote:
Hi
Can anyone advise as to how I would set up Workflow Notification Mailer to simply send mails to a single account as opposed to EVERYONE?
I need to do this for both INBOUND and OUTBOUND notifications.
please help.
ThanksUse an "Override Email Address" -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Override+AND+Email&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Workflow Notification Mail

Hi All,
Can anybody tell the steps how to send Oracle Workflow notification Mail to a specified user.
I was refering [http://apps2fusion.com/apps/13-oracle-workflows/373-workflow-notification-sender-email-address] but using this only notification is going not the mail.
I need to send mail notification.
Plz help...!!!

Hi,
Plz provide your suggestions.
Below is the code which I am using to invoke the workflow. Actually I am having Start->Notification->End in my workflow.
I want to send notification mail to the user.
DECLARE
l_itemkey VARCHAR2(100);
v_role_name VARCHAR2(100) := '[email protected]';
v_role_email VARCHAR2(100) := '[email protected]';
n_count_role INTEGER := 0;
BEGIN
SELECT COUNT(*)
INTO n_count_role
FROM wf_local_roles
WHERE NAME = v_role_name;
IF n_count_role = 0
THEN
--If the sender does not exist in WF Local Roles, then create one on the fly
wf_directory.createadhocrole(role_name => v_role_name
,role_display_name => v_role_name
,role_description => v_role_name
,notification_preference => 'MAILHTML'
,email_address => v_role_email
,status => 'ACTIVE'
,expiration_date => NULL);
dbms_output.put_line('Ad Hoc Role Created');
ELSE
dbms_output.put_line('Ad Hoc Role Already Exists');
END IF;
SELECT oe_order_headers_s.NEXTVAL
INTO l_itemkey
FROM dual;
wf_engine.createprocess('XXTEST'
,l_itemkey
,'XXTEST');
wf_engine.setitemuserkey(itemtype => 'XXTEST'
,itemkey => l_itemkey
,userkey => l_itemkey);
wf_engine.setitemowner(itemtype => 'XXTEST'
,itemkey => l_itemkey
,owner => 'SYSADMIN');
wf_engine.setitemattrtext(itemtype => 'XXTEST'
,itemkey => l_itemkey
,aname => '#FROM_ROLE'
,avalue => v_role_name);
wf_engine.setitemattrtext(itemtype => 'XXTEST'
,itemkey => l_itemkey
,aname => '#WFM_FROM'
,avalue => v_role_name);
wf_engine.setitemattrtext(itemtype => 'XXTEST'
,itemkey => l_itemkey
,aname => '#WFM_REPLYTO'
,avalue => v_role_email);
wf_engine.startprocess('XXTEST'
,l_itemkey);
COMMIT;
END;
/

Workflow Notification Mailer in 11i

Hi,
I configured workflow notification mailer in 11i,
(a) only outbound Mail Configuration, I enabeld that
(b) started workflow Mailer Service Concurrent Manager
(c) started workflow agent listener service concurrent manager
Once I did the above, I am getting mails from Oracle Alerts..its nice..
But I want to know, the following configuration in workflow mailer wizard
---> Inbound Mailer Configuaration ( IMAP), Can I give same SMTP mail server name in this...
can anybody describe this, what for this configuration ( Inbound Mailer Service)....

Notification mailers can also process e-mail responses from users, using the Internet Message Access Protocol (IMAP). A notification mailer uses a Java-based e-mail parser to interpret the text of each message and create an XML representation of it.
A notification mailer uses three folders in your response mail account for response processing: one to receive incoming messages, one to store processed messages, and one to store discarded messages.
A notification mailer does the following to process response messages:
Logs into its IMAP e-mail account.
Checks the inbox folder for messages. If a message exists, the notification mailer reads the message, checking for the notification ID (NID) and node identifier in the NID line.
If the message is not a notification response, meaning it does not contain an NID line, the notification mailer moves the message to the discard folder and treats it as an unsolicited message. For the first unsolicited message from a particular e-mail address, the notification mailer also sends a warning message back to the sender of the message.
However, to avoid sending unnecessary warnings due to bounced or auto-reply messages, each mailer node stores a list of e-mail addresses from which it has received unsolicited mail, and does not send any further warning messages to those addresses. Instead, if the node receives a second unsolicited message from a particular address, the notification mailer discards the message and raises the oracle.apps.wf.mailer.unsolicited event. You can optionally define a subscription to this event if you want to perform some other action in response to the second unsolicited message. For all subsequent unsolicited messages, the notification mailer simply discards the message.
For more Info Please refer Oracle Workflow Administrator's Guide
Hope it helps!
Chetan

ORACLE WORKFLOW NOTIFICATION MAILER START 방법

제품 : MFG_IP
작성날짜 : 2003-04-22
ORACLE WORKFLOW NOTIFICATION MAILER START 방법
============================================
PURPOSE
Notification Mailer를 background에서 running 시키고,unix account의 logging out 후에도 지속적으로 running 시킬뿐 아니라 standard output 및 error message를 각각 저장할 수 있게 workflow unix user로 workflow mailer를 start 할 수 있다.
Explanation
nohup $ORACLE_HOME/bin/wfmail.snd -f <config_file>
1>mailer.log 2>mailer_err.log &
where <config_file> is $ORACLE_HOME/wf/res/wfmail.cfg
Alternatively, you can do the following to start the Notification Mailer without specifying the CONNECT parameter & value in the above step: Create Mailer Configuration file as the password parameter in the $ORACLE_HOME/wf/res/wfmail.cfg file is in clear text and poses a security problem.
nohup $ORACLE_HOME/bin/wfmail.snd -f $ORACLE_HOME/wf/res/wfmail.cfg owf_mgr/password@connect_string 1>mailer.log 2>mailer_err.log &
(Please note that even this method of running the Oracle Workflow Notification Mailer is not entirely secure in the sense that if anybody who has access to the middle-tier can always do a “/usr/ucb/ps -auxwww | grep wfmail.snd” and get the CONNECT information).
Example
Nohup $FND_TOP/bin/WFMAIL apps/apps@ 0 Y -f $FND_TOP/resource/ wfmail.cfg
1> $APPL_TOP/$APPLLOG/startwfmailer.log
2> $APPL_TOP/$APPLLOG/startwfmailer.log&
Reference Documents
-------------------

제품 : MFG_IP
작성날짜 : 2003-04-22
ORACLE WORKFLOW NOTIFICATION MAILER START 방법
============================================
PURPOSE
Notification Mailer를 background에서 running 시키고,unix account의 logging out 후에도 지속적으로 running 시킬뿐 아니라 standard output 및 error message를 각각 저장할 수 있게 workflow unix user로 workflow mailer를 start 할 수 있다.
Explanation
nohup $ORACLE_HOME/bin/wfmail.snd -f <config_file>
1>mailer.log 2>mailer_err.log &
where <config_file> is $ORACLE_HOME/wf/res/wfmail.cfg
Alternatively, you can do the following to start the Notification Mailer without specifying the CONNECT parameter & value in the above step: Create Mailer Configuration file as the password parameter in the $ORACLE_HOME/wf/res/wfmail.cfg file is in clear text and poses a security problem.
nohup $ORACLE_HOME/bin/wfmail.snd -f $ORACLE_HOME/wf/res/wfmail.cfg owf_mgr/password@connect_string 1>mailer.log 2>mailer_err.log &
(Please note that even this method of running the Oracle Workflow Notification Mailer is not entirely secure in the sense that if anybody who has access to the middle-tier can always do a “/usr/ucb/ps -auxwww | grep wfmail.snd” and get the CONNECT information).
Example
Nohup $FND_TOP/bin/WFMAIL apps/apps@ 0 Y -f $FND_TOP/resource/ wfmail.cfg
1> $APPL_TOP/$APPLLOG/startwfmailer.log
2> $APPL_TOP/$APPLLOG/startwfmailer.log&
Reference Documents
-------------------

Getting Workflow Notification Mailer SMTP Information Programatically

hi all,
I have get SMTP information that is been configured in oracle applications r12.
I need to know , how we can get it programmatically. Is there any database view?
e.g smpt.gmail.com
We have provide email intimation facility from ADF page.
Thanks
Balaganesh

Hi,
Please see FND_SVC_COMPONENTS and FND_SVC_COMP_PARAM_VALS tables (more details about the tables can be found in eTRM website).
Workflow notification mailer not sending mails
Re: Workflow notification mailer not sending mails.
Note: 415721.1 - Which tables stores the NEW test address 'set override address' ?
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=415721.1
Regards,
Hussein

Workflow Notification Mailer continues to fail with a STOPPED_ERROR component status

We are running the E-Business Suite version 12.1.3 (Standard) on Solaris Operating System (SPARC 64-bit). Multi-Org enabled. We just applied over the weekend RUP 7 patch 18004477. We have several seeded and customized workflows running (HR, BENEFITS, GRC, AP, AR etc).
The Workflow Notification Mailer continues to stop in error with this message in fnd_svc_components:
STOPPED_ERROR - Maximum number of errors (10000) have been reached for this Service Component -> oracle.apps.fnd.cp.gsc.ProcessorException: An unexpected RuntimeException or Throwable occurred -> java.lang.NullPointerException
It only runs for a few minutes before ending in error.
I attached the last Workflow Notification Mailer log entries begining around where the component exited with the error above. I suspect that one of the error messages above is the problem. I can send more of the log if necessary.
Due the error message above regarding the maximum number errors we have updated wf_notifications and wf_items table for any rows that are 'WFERROR' to CLOSED status and to a mail_status of SENT. In wf_items we set the end_date to the sysdate for the items where the item type = 'WFERROR'. Despite this we are still receiving this error with the Workflow Notification Mailer.
Does anyone have an idea what is causing the component to shut down with this message? I would greatly appreciate any help with this issue that we are having.
Thank you, Greg
Message was edited by: GregTruta

Hi Greg,
Please see:
Users Suddently Stop Receiving Email Notifications (Doc ID 467516.1)
Error in log ~ The agent could not be found: ECX_INBOUND (Doc ID 1188056.1)
Thanks,
Hussein

Workflow Notification Mailer in Non-Prod

Similar Messages

Maybe you are looking for