Working on the same project on different Macs

Hi everybody! Greetings from Switzerland!
I am prety new to FC pro 5 running it on a PowerMac 2,5 Dual AND on a powerBook 1,67.
The problem is that I started to cut my powerbook and now I want to continue working on the project on my Desktop. Is there a good workflow to do this?
Thanks for suggestions!
Stephan

Then get them off of there. They shouldn't be there in the first place. :^)
Seriously, never capture to your internal system drive. You are more prone to dropouts. Get yourself an external firewire drive, 7200 RPM, 8MB buffer, and copy the entire contents of the FINAL CUT PRO DOCUMENTS folder onto it. Then delete it from your internal hard drive...AFTER you confirm they are all present and working by using your G5.
Shane

Similar Messages

  • Does anyone have experience with having multiple editors work on the same project from different computers?

    Does anyone have experience with having multiple editors work on the same project from different computers?

    As much as I hate to admit it, YOU ARE RIGHT!
    I will tread lightly on this project.
    Thanks for the sanity check,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Is there a way to work on the same project from multiple macs?

    I was hoping to save a project that I was working in to the Cloud and then downlpad it to my other Mac. Can't seem to figure it out.

    Not sure what your question has to do in respect to Apple networking, but if you're asking can you use your Xbox 360 on a wireless network (regardless of the router's manufacturer) to access different Xbox Live! accounts, then the answer is yes.

  • Can two different account work on the same project?

    I work for a non-profit organization and we are think about switching platform for our website, we are looking in to Muse, our graphic designer already have a Adobe Muse account and we would like to get an other account for the organization, will it be possible for both our account to work on the same project? With an account we can only have two computer with Muse and there will be 3 working on the website.

    Hi Alexandre,
    At any given point not more than one person can work on a .muse file. Muse is not yet designed for a workflow like this. You can update the .muse file using three different accounts as long as the file is not opened at more than one end at the same time and the file needs to be shared manually in between the accounts once one person is done working on it.
    - Abhishek Maurya

  • How to work on the same project on two machines at the same time and also exchange progress seamlessly using Adobe Premiere Pro CC 2014?

    We are working on a film project on Adobe Premiere Pro CC 2014. Two editors are working on the same film project (same pproj file ) on two machines. As a result the bin structure and the file structure is exactly the same. We even bought two licenses for the respective machines to make matters simple (at least we thought it would).
    Now when we share a sequence between the two machines, every time we have to import and re-link media. Also each sequence import comes with its own set of files, which are actually already present in the project. Basically the new sequences are looking to re-link the media to the original/ source files only and are completely ignoring the file structure present in the project.
    In all editing softwares, timeline/ sequence sharing is a very common practise when working on multiple machines. Why is it so tedious in CC 2014? Every time we share a sequence between the two machines the media gets doubled and tripled in the project. As a result the project file size is increasing perpetually. Already Premiere CC 2014 is extremely laggy and slow, and this stupid bug is making it more difficult for us to finish our work on time.
    Has anybody ever faced this issue? How do we solve it? We are willing to try out any workflow that you can suggest.

    Concurrently working on the same project it requires a specific implementation in all editing programs like Avid's Unity/ ISIS shared storage. That's what you are simply not considering. none of your issues would be any problem if your projects resided on a commonly accessed server or something like that. Check respective hardware solutions.
    Mylenium

  • OSB - many developers working on the same project?

    Hi,
    I was wondering if you can see any way multiple users could be working on and publishing to the same domain?
    Now if a couple of developers is working on the same project using Eclipse (OEPE), if one publishes, any other changes by other developers will not be visible on the osb server, as they will be covered by the publish.
    Do you have any ideas?

    You have to use version control on this situation.
    We had used version control with in our project and you can save work and time.
    Rules
    1. You have to take a local copy of the project and make modification and compile and test it.
    2. If any user wants to leave for the day then, he has to comile the source code and push it in to source control. There may be some chances where you will pull out his code as well because of dependencies, when you compile it may fail. So compile and push in to the source control.
    3. There is an option where you can put a lock on the project folder where you are working.
    Note: If your team is working on common dev server, then you can think about having individual server still you should use source controlMuch more available.
    Use source control tools.
    Thanks,
    Vijay

  • Users to work on the same project

    Hello,
    I'm like know how can I to allow all users to work on the same project, but this project was only read.
    Help please,
    Thanks.

    Not sure what you mean, you should create separate usernames and register them. This is in the documentation (user guide).
    Then you can have these users work on the project.
    Jean-Pierre

  • Can TWO Editors Work On The SAME Project Separately ??

    Have Premier CS3 on XP
    We have a heavy edit this week for a film festival.
    Can one editor work on part 1 on one PC machine...and another editor work on part 2 on a mac...and then somehow... be able to transfer the mac timeline over to the PC machine for final work.
    What special gottcha tricks do I need to know???
    We can get both editors to use the same clip names. They will be on different drives...but the same structure...the same directories and filenames exactly on each drive. The Mac version would copy the master clips folder im thinking. Both machines...same raw materials.
    Im just concerned that we may forget to do an important step... and not be able to successfully bring all the edit timeline pieces over so they point correctly.
    Thanks for your critical tips and tricks
    Susan

    Should work OK, as long as you're using the same media source for both platforms/projects. In other words, you need to be working with something like DV AVIs or QT DV MOVs with both. One platform will suffer because it's not as tuned to work with the other platform's media, but it's doable. You could capture the same media to each platforms native media (DV AVI on PC, QT DV MOV on Mac), but relinking once you transfer from Mac to PC will be a nightmare. If you're working with something like P2 MXF, though, this will be a breeze--just point to the proper directory and everything will be fine. This is a major benefit of PPro's native handling of such media, IMO.
    You could also copy the media over, wholesale, from Mac to PC--I think this is what you're saying now that I'm reading your post again. I'm guessing that in this case, both machines would NOT be working with the same material originally, correct? Just note that you may have file system incompatibilities going from Mac to PC. Mac uses the HFS file system, whereas your PC is probably using NTFS. FAT32 is common to both systems (can be read/written on each) but you're limited in supported file sizes to less than 4GB. If you've got an HFS-formatted external drive you'd be moving to the PC, I recommend
    HFS Explorer. It will allow you to mount and extract data from your HFS-formatted disc on the PC. There is also MacDrive, which is more tightly integrated with PC (disks show up as native filesystems in Explorer) but it's not free. Time might be an issue, though, and MacDrive might be the better option. There is a free limited trial, I believe.
    Beyond that, just import the Mac-generated project into the PC-generated project, and relink your files. BE SURE TO DO THIS ON A COPY OF YOUR PC PROJECT, just in case the unthinkable happens. From there, the projects should be successfully merged, and you can proceed with final assembly. I would suggest keeping your additional timeline items to a minimum in the Mac project (ie. audio, graphics, titles, etc) just to eliminate possible transfer headaches. I really don't think you'll face an issue, but it could wreck your day if something goes haywire.
    Finally, and most importantly, test this out if you value your sanity. This is not something you want to simply "hope" works without any sort of field trial. This should work perfectly well, but I assume to responsibility if it does not!
    Good luck...

  • Can an editor and I work on the same project, at the same time in PPCC?

    I'm trying to figure out if two people can edit a project in live time... I'm currently struggling with the 20gb cloud limit for my projects and I think I'm just going to bring an in house editor into the mix. 
    Can he and I edit the same project from a NAS drive?
    ---Trav

    As far as I know, "regular" Premiere Pro does not have any provision for the kind of file locking/unlocking required for 2 people to edit the same project... so if YOU save an edit and your other person saves after you, your edit is going to be overwritten and lost
    Solution for networks...
    Adobe Anywhere http://www.adobe.com/products/adobeanywhere.html
    http://www.creativeimpatience.com/adobe-anywhere-enterprise-solution/

  • How do you share the same library across different mac accounts on same computer?

    I have 3 accounts on the same Mac and want to share the library (or parts) across all 3.  Home sharing does not seem to work -- I've activated it but there are no shared libraries showing up on itunes.  thanks.

    iTunes: How to share music between different accounts on a single computer

  • Working on an iWeb project from different macs?

    I have created and iWeb page with my G5 and am going out of town for 10 days. I would like to continue updating my site with my iBook G4. But I can't find the iWeb project files to transfer to my iBook. There surely has to be a way to do this.
    iBook G4 & iMac G5   Mac OS X (10.4.5)   iWeb 1.1.2

    Hi Jason,
    First off you want to backup your iweb sites. Go to the HD, your home folder (with the house icon) library - application support - iweb. Inside this folder you will find a domain file, back this up to another HD. Once you have it backed up you can make a copy of this file. Put this file in the same folder on your ibook and you will have your sites there to work on. Good lucke

  • Is it possible to share sequences between people working on the same project?

    We have the same media in the same bins.  Yet when I copy a sequence from his project, load my project, and paste that sequence into my project, Premiere creates a Recovered Clips bin with duplicate references to most (not all) of the media already in the project.  I do not want to have duplicates (triplicates+) for our project.  Is there any way to prevent this or merge duplicates into the nice media structure I spent many hours setting up?

    Thank you Kevin!  I remember hearing something about this in the new version notes... or an Adobe promo video.  I can browse elements of my colleagues project without actually loading it (he's using Premiere 8.0.1).  I'm using Premiere 8.1.  I was able to browse his project and move the sequence into my root bin and no duplicates were made (at least that I can see).    Thank you!

  • How to work with the same Object in different computers?

    I'm working with Players, and I have to pass them to the server from the client..how can I meke that?
    Thanks

    Just to clarify, the OP is talking about "javax.media.Player".
    (He previously discussed the question on a different forum).

  • Can multiple people work on the same project at the same time with Creative Cloud for Teams?

    We have a project we are working on, and since it needs to be done in record time, multiple people need to be able to access the most current version. Is there a way to work on one project concurrently, like on Google docs?

    The only link I have is to manage your team account http://forums.adobe.com/thread/1460939?tstart=0
    The only Adobe program/process for team work that I know of is Adobe Anywhere, but that requires a very different process
    Adobe Anywhere http://www.adobe.com/products/adobeanywhere.html
    http://www.creativeimpatience.com/adobe-anywhere-enterprise-solution/

  • Can two different members of Creative Cloud, to share the same project?

    I work with a partner who also has a Creative Cloud account. If we need work in the same project, how can she access to my web accounts from her computer  and viceversa?

    Yep,
    Two ways, you can either add the other person as a user or contact support and they can add the other account to your site.

Maybe you are looking for

  • Problem with call form built_in - SOLVED

    Hi all. I'm on devsuite 10g. I would know where local on my machine I must put the *.fmx files of two forms; I have a form A that calls a form B using call_form('B'); statement. But I receive an error FRM-40010: Cannot read form B. I have got both fo

  • To wait for 5 seconds

    How do I make a program to "stop" 5 seconds and then execute again? I dont want to use the Timer Class or the thread's wait() method since they are over-complicated in my case.

  • A different AVCHD Capture Issue - It works but cuts off the clip

    I have 6.0.1 up and running fine. I have an 8:15:24 length clip I am trying to log and transfer. It t recognizes the camera and I import the clip. Even though it appears to go to the end the resulting clip is only 4:33 long. Any ideas? I went to iMov

  • MB51-Report with GL information

    Hi Gurus, My clients wants a report like MB51 along with GL code and GL description during the production entries. Can we do this, if possible what tables i need to consider for this. Regards Sreenivas.P

  • Install License without a Floppy Drive

    I just ran a new server installation and I can't install the licenses because my server doesn't have a floppy drive. Is there another way to install the license?