Working with buttons and movies

hi guys, amd fairly new to flash web design and have been
trying to create my portfolio.However, i hv created thumbnails
which i want 2 act as buttons and when click to ,i would like the
main image to appear in the centre with others on the
sides.something similar to the gallery of
http://oviedofoto.com/. However,
i have tried it out a million times and have failed.
Pliz help.thanx

Try this tutorial:
http://www.flash-creations.com/notes/dynamic_slidingviewer.php

Similar Messages

Working with AVCHD and MOV files

I am just learning on FCP 7 and have very limited experience thus far. I have been using AVCHD files via L&T with no problem and also MOV files simply by importing them. However, when I am using both file types within the same sequence (L&T AVCHD and converting to ProRes and importing MOV), I need to immediately render one of the file types (the one I bring in last). This is also true for any change I make to that particular clip. This would be extremely time inefficient if I were to proceed with this process using several clips from both formats in order to put something together.
I would appreciate any advice or suggestions in how I can best work with these two file types and by reducing the rendering time (without compromising quality). Is there a way to convert the MOV files to a ProRes? This doesn't seem to be an option with the L&T feature.
Thanks

Thank you for the reply, David!
Sorry, it is an H.264 codec.
So does this mean that there is really no workaround within FCP to work with the two different formats ....other than rendering each clip I drop into the timeline? I was hoping to avoid having to use another application, but if I really don't have a choice....then perhaps I will try compressor or MPEG streamclip as you suggested. Are there any loss of quality issues when using either of these two programs?
Thank you

Apple Tv does not work with youtube and movies on iphone or ipad

I am on my 2nd generation apple TV. Always worked with Youtube, my iphones and ipads and Netflix.
I think it started about a month ago. I can only use Netflix.
If I try YouTube and select a video (even if small) it just keep spinning and never starts.
The same thing happens with my video from iphone 5S, 5, and ipad 2.
Than I went to my sons house with a Apple TV 3rd generation and different wifi,
same thing happens, I can not show a video from my iPhone 5S.
What is going on, did Apple TV change something?
Is this a update that went wrong?
(I have auto update and also checked manually to make sure have latest apple TV FW)
(All iphone and ipads are latest FW).

Hi pcorsaro,
You may need to restore your Apple TV and see if the issue is resolved after that process:
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/ht4367
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

ATV doesn't work with mp4 and mov files

Apple TV doesn't play the mp4 or mov files that are in my iTunes Library.
ATV plays only m4v video.
How can I do?
Thanks,
Lud

Thanks Rudegar and Churchill for your answer and sorry if I answer so late.
I didn't create such files... I only downloded them from internet...
I have tried to convert them with "Any video converter" bought on App Store. If I tried to convert the files in a ATV format the software creates a m4v file, but offen the audio is out of sync...

Working with XML and Button

Hi,
How are all of you. Well I am new to Flex. But I have started
building simple applications. One of the top most problem I am
facing is working with XML and Button. Can you please assist me in
this. I am explaining my problem:
I have an external XML file like this:
<Menu>
<button>
<idnt>0</idnt>
<label>General Health</label>
<text>General Health pages is currently under
construction</text>
</button>
<button>
<idnt>1</idnt>
<label>Mental Health</label>
<text>Mental Health pages is currently under
construction</text>
</button>
</Menu>
Now I want to generate Buttons Dynamically from this XML. And
the second thing which is the most problematic is that how I code
it so that when I press the Button labled "General Health", it will
show the same text as in the XML tag coresponding to tag
"<label>General Health</label>" ?
I badly need this. I am realy confused on this. Kindly help
me.
Regards
..::DeX

Let's assume that variable "node" contains one element of the
XML. For example,
<button>
<idnt>0</idnt>
<label>General Health</label>
<text>General Health pages is currently under
construction</text>
</button>
such that node.label would be "General Health", node.idnt
would be 0, etc.
You can build a Button like this:
var b:Button = new Button();
b.label = node.label;
b.data = node; // more on this later
b.width = 60;
b.height = 26;
addChild(b); // critical - adds the button to the display
list so you can see it
b.addEventHandler( MouseEvent.CLICK, handleClick );
You must set the button's width and height unless the button
will be in a container that will size its own children (like Tile).
Every Flex component has a data property. You can set it to
whatever you like. For your needs it makes sense to set each
Button's data property to the node it relates to.
Now suppose that code above is in a function, createButton:
private function createButton( node:XML ) : void {
// code from above
Here's how to make all the buttons where "menu" is a variable
that contains your XML:
for(var k:int=0; k < menu.button; k++) { // menu.button is
an XMLList
createButton( menu.button[k] );
Now to handle the event:
private function handleEvent( event:MouseEvent ) : void
var b:Button = event.currentTarget as Button;
trace( b.data.text);
When a button is picked, the description element will print
in the debug console. Replace the trace with whatever code you
need.

HT4437 The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Does anyone know what I could be doing wrong? Thanks!!

The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Can someone help me to get things working? Thanks!

As an IT person, I can put my hands up to the same difficulty. Then on double clicking on Home button, find AirTV symbol amongst Music control
Solved my problem having spent hours looking for a complicated answer. Well done Apple for hiding it so well.
Brian

NB200 Windows 7 Fn key not working with ESC and F1 to F8 keys

I recently bought a Toshiba NB200-136 and everything worked fine.
Flash cards on top/bottom of the screen work with Space, ESC and F1 to F8 keys, the rest of function buttons work without showing the cards. Lately the cards stopped showing and I cannot use the Fn + Space, ESC, F1-F8 keys (there's just no reaction), though the rest of buttons work with Fn and the LED is always lit when the Fn is pressed.
I reset Flash Cards, checked and changed their settings few times and they work only if I choose 'Allow the mouse to bring up the cards' option. Even then they don't appear when I press Fn and the functions work only when I click one of the cards.
The problem appeared after (though I'm not sure if immediately) such situation:
I clicked Start -> Shut down and closed the lid. When I opened it the next morning I saw an empty list of programs that wouldn't shut down (it happens quite often, but it's off top). I clicked 'Cancel' or 'Force shut down' but it didn't work so I pressed the Power Button for 5 secs to turn the computer off. I noticed the Fn problem after turning it on and it didn't disappear after resets.
I think the problem appeared before but disappeared after reset so I ignored it.
I'll be thankful for your help.

Any time that you force Windows to stop instead of letting it shut down normally (sometimes you have to shut it off), you may have lost clusters of data that interfere with the proper operation of Windows. So I suggest you start up and run scandisk and make sure you check the box for fixing problems. The other box doesn't need to be checked unless you suspect bad sectors on the hard drive and it takes a long time so I recommend only checking the one box for finding and fixing errors.
Let us know if this worked and the problem is fixed.
Good luck.

How to work with DTR and CBS?

Hi
I have designed one web dynpro application. Now I want to work on this application through DTR. Means i want to do versioning and all. How to work with DTR..? I have gone through lot of blogs and help available in SDN but i am unable to understand how to work with it.
One more thing how to work with CBS. How to configure CBS. I have NWDS latest version 7.0.7. In window perspective i am unable to find JDI. can any one please explain me if u have worked on this with example
If possible can any one send me the screen shots how to work with these ?
Best Regards
Ravi Shankar B

Hi Ravi
For you to work with DTR and CBS, firstly u will have to configure JDI on server.
To configure the NWDI, please go through the links given below:
http://help.sap.com/saphelp_nw2004s/helpdata/en/07/f6bc3d42f46c33e10000000a11405a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/71/0369404c65587ee10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/26b84d6c823f66e10000000a11466f/frameset.htm
In Nutshell, following steps will be performed:
1) logon to Portal Devinf.
2) click on CMS
3) Go to landscape configurator
4) create domain
5) create tracks and add Software components in that track
6) runtime systems ( dev/qa etc are configured
7) in the transport studio, all the files listed are checked in through check - in tab.
8) they move to developement tab.
Once all these things are done, in your NWDS:
1) Setting the devbox host name and server port in Window -> Preferences -> SAP
J2EE Engine
2) Setting Portal URL in Window -> Preferences -> JDI -> DC Pool and ping server,
to check whether server is getting accessed from NWDS.
3) Once server is set, login to DTR and go to DTR perspective. Create a client there, by doing a right click and filling up the required details.
4) In the DC perspective, in the Local DCs view, perform import configuration.
5) the dev track is not configured
6) Under this, after logging into DTR, now you can create your project, check them in and create new versions.
Thanks & regards,
Anupreet

FaceTime no longer working with Yosemite and IOS 8.1

I have used FaceTime flawlessly for some time with no issue.
After I upgraded to Yosemite on my MacBookAir and IOS8.1 on 5S and iPad air, I've had a problem connecting.
When I get a call, all the devices ring (as they should) but it will not connect on the first device I pick up on. It says connecting
but all the other devices keep ringing and finally it says I have a missed call. The connection does not happen. If I turn off
all devices except one, it will work...... do we have a bug here??

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Hi ron1098,
Try my application Dates to iCal. it runs on the Mac, but you can sync the calendar to your iOS device.
See more about Dates to iCal here. It is £4 shareware with a 2 week demo.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Handoff not working with Yosemite and iOS 8

I have three Macbook Pros in my household. Two are mid 2012 models and the other a late 2012 model. Each is supposed to support the handoff feature of Yosemite and ios8. Everything seems to work properly between my daughter's late 2012 MBP and her iPhone 6. But on the other two MBPs in our family the continuity feature does not work on either of them. Receiving and sending calls works fine. But the continuity does not work even though all three MBPs and all three iPhone 6 are on the same wifi network.
I've tried all the suggestions that I could find. Toggling off and on the various settings on the MBPs and the iPhones.
John

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Working with buttons and movies

Similar Messages

Maybe you are looking for