Working with colours in a Gauge UI Element In VC

Hi all,
Iam working with a Gauge UI Element in my model in VC....iam displaying arc rate ( which is a percentage) using a Gauge UI Element...Can i know whether we can change the colour of needle to depending on the value of arc rate...i.e...
.if arc rate is less than 30 ...display the needle as green
if arc rate is between 30 and 60  ...Yellow Colour
if the arc rate is > 60 .......Red
Or the other way is display the sector covering the value as  red or green or yellow depending on the value ?
If any of this is possible ...please let me know the procedure.
Thanks & regards,
P.Navakanth.

Hi,
Unfortunatly, currently the gauge cannot be dynamically styled like that.
Regards

Similar Messages

  • Working with converted .mov files in Premiere Elements 2

    I recently got a digital camera that records .mov clips with H.264 technology. I use it for back up when Im having problems with my regular camcorder. Of course I can work with these .mov files in QuickTime Pro with no problem. But in order to work with them in Premiere Elements 2, it appears I have to export it into the .avi format first. After exporting in QuickTime Pro, when I bring the new .avi file up into Premiere Elements, the color quality is retained, but much of the resolution is lost. Its very pixelated. I understand that .avi and .mov work differently in the way information is stored avi in chunks and mov in streams, but Im wondering if there is a way I can work around this. The reason why I got QuickTime Pro initially was to be able to convert my finished .avi videos made in Premiere Elements 2 into MPEG-4 files using the H.264 codec for better quality. And Im doing that all the time now with no problem. So I am wondering if when I reconvert the .mov clip thats been converted into .avi back into mpeg-4, will the resolution be restored? That is part of my question. The other part is regarding the initial conversion process. Are there settings in QuickTime Pro for converting .mov to .avi with as little loss in resolution as possible? The manual doesnt address this issue specifically. Any ideas or suggestions? OS is Windows XP Media Center edition, computer Sony Vaio dual processor. Thanks, Judy

    Hi again Steve. I'm so embarrassed. After my initial reply to your message I went to the Adobe site to see if they even made Premiere for Mac and learned they don't. I also read a review in Wired that says Premiere 6 is just as good if not better than iMovie which they say has actually been downgraded. I'm using Premiere 2, so I thought I might consider upgrading. Then I watched "Steve's Story" and realized it was you. (Your daughter is a cutie! Adobe must love you.) So my question is this: Would my problem be solved by simply upgrading to Premiere 4? If I do that, would it be compatible with regard to catalog integration with Photoshop Elements 4 or would I have to upgrade to Elements 6? If I upgraded the whole package would my current Photoshop Elements 4 catalog transfer with all tags intact? This is vital for me to know because I rely on them heavily. I realize that I would be skipping a version in the upgrade. Is that possible? Does that matter? Please read my reply to Bill because it explains why I want to use those particular .mov files. Another question for you. I use your excellent book a lot. If I upgrade will it become useless? Finally, since you're the expert, let me tell you what I'm really aiming for and get your advice. I need to start composing my own musical soundtracks to my videos. I want to do it as I'm viewing the timeline. Therefore, I know I need to invest in a midi-capable keyboard or controller and software. The problem is that there are few controllers compatible with Windows XP Media Center Edition. I am told I would need to disable the XP Media Center registry keys for anything to work which wouldn't matter because I don't use Media Center features anyway (like TV hookup, media player, etc.). But messing with the registry sounds a little complex and dangerous to me. There's got to be an easier way. Do you have any advice or recommendations? Can you point me to any helpful resources? Now you see why I want a Mac? Everyone says all this kind of stuff would be so much easier with a Mac. Problem is I have a limited budget and would like to make the most with what I have. I hope I haven't overtaxed you with my questions. Thanks for your patience! Judy

  • Working with Raw Files in Adobe Photoshop Elements 11

    I shoot in Raw format with a Canon EOS 60D, when I import raw files into Elements it first loads Adobe Camera Raw. After working on an image & then opening the file in Elements 11  ( Expert tab ) it offers a variety of options to enhance the image. It seems to be doubling up OR ... my question is , can I import the file directly into Elements 11 & work on it without using Adobe Camera Raw ?
    Thank You
    Phil
    Classic Directories

    Thank you for your reply, I use Adobe Camera Raw to edit most of my photos & then convert to tif. I bought a book called " The Photoshop Elements Book " with tutorials for Elements 11 wich seems to confuse. I have sucessfully imported raw files directly into Elements 11 & worked on them. By doubling up, I meant how much work should I do in Adobe Camera Raw, as it seems everything you need to edit/enhance/convert is in Elements 11.

  • Will Premiere Elements 4 work with Windows 7?

    I am going to have to upgrade to Windows 7 from XP.  Will my Premiere Elements 4 work with Windows 7?

    Monoscope
    Premiere Elements 4 works great in Windows 7 Professional SP1 64 bit computer. I have been there and am doing that along with other versions of the program on the same computer.
    Do not go to the desktop icon for Premiere Elements 4 and set a compatibility setting in the Properties.
    Just make sure that you are running the program from a User Account with Administrative Privileges and perhaps also with a Run As Administrator (right click desktop icon, select Run As Administrator). Latest version of QuickTime remains a must.
    Does Premiere Elements 4 meet your video editing needs, feature-wise and otherwise? If so, stay with it. If not, explore the latest version 12 via a tryout from Adobe before any thoughts of purchase.
    The above is my take on your inquiry. Please let us know if you need clarification on anything written.
    Thanks.
    ATR
    Add On...If you need a computer environment with greater resources for your Premiere Elements workflows, then you need to look at specifically Premiere Elements 10, 11, or 12 specifically on Windows 7, 8, or 8.1 64 bit.

  • How can I work through the limitations of the Premiere Elements 9 trial?

    Adobe has a number of suggestions for working with the trial download of Premiere Elements 9.
    http://kb2.adobe.com/cps/870/cpsid_87080.html

    yogawithlexi,
    Welcome to the forum.
    Im also needing to just edit the photos but adding text. Nothing fancy. I just want to make some flyers.
    For editing photos, to be output to the printed page (whether by a commercial printing service, or a desktop printer), I strongly recommend Photoshop Elements (PsE).
    If you need to output to a video file, then Premiere Elements (PrE) can possibly do what you want, but not for the printed page - at least not easily, and with the ultimate results. First, Video is not dependent on DPI/LPI (Dots Per Inch, or Lines Per Inch), where printed material will be. Also, while PrE can output a Still Image, the quality, when printed, will be far less, than what one can obtain with PsE.
    Do you currently have Photoshop Elements on your computer, or only Premiere Elements?
    Good luck,
    Hunt

  • Generic Java class for working with Context Nodes

    Hi,all
    I would like to write generic Java class for working with Context Nodes:
    populating node,
    add element to node,
    update node element,
    remove node element
    Any ideas how can I do it?

    Hi,Armin
    Thanks for your answer.
    I have many nodes with the same structure,but different data.
    I don't want to work with each one of them individually.
    This is the main reason.
    Regards,
    Michael
    Any ideas?

  • Urgent! PSJ. WORKING with Logistic Data Base.

    I use PSJ. and need to get out some spp elemnts from there.
    so on the selection screen I set down spp elements "11" AND "12".  So i need to work with <b>only these</b> spp elements.
    But the command <b>GET PRPS_R</b> gives out other spp elements as well (<b>the ones that are situated upper in them hierarchy</b> ) . why is that and what can i do with it?

    >>pls any one help regarding this we need the urgent solutions .
    Then you are wasting precious time... This is an Oracle forum.

  • WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer

    All-in-one (OfficeJet or Inkjet) WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer.
    Even if colour cartridge is over, w/o replacing I can still print with black cartridge.
    Which printer is suitable.

    Since I upgraded to Firefox 19 from 18.0.2, on my Windows XP (SP3) laptop, I, too, can no longer open a new window. File-->New Window does nothing; also can no longer tear off a tab and open it in a new window (it stays where it is). Also, if I right-click on a tab and select Move to New Window, nothing happens. All of these worked fine in FF 18.0.2. All of these work fine with FF 19 on Windows 7. Only an issue on my XP laptop.
    After trying to open a new window, and not seeing the new window come up (and yes, I waited a long time), I decided to close my current window, which had multiple tabs open. Instead of just closing, it pops up the message reminding me that I'm about to close all those tabs. If I say close, and then go into the Task Manager, the Firefox application has disappeared (as expected), but the firefox (and plug-in container) processes are still running. So I have to manually kill the Firefox process to get it to quit. it's as if it thinks there is another Window open (the one I tried to open but never appeared). This happens every single time! I've restarted my laptop, and that does not resolve the problem.
    Is there a way to downgrade back to v 18.0.2 until this is fixed?

  • A P Elements 3 no longer works with win 7

    A P Elements 3 no longer works with win 7, crashes when I click on preferences and no sound works in editor. So I want to upgrade but not seeing any dates with newer editions. Whats the oldest I can go to work with win 7 64 bit? Like maybe APE 10? Or maybe there is an update to fix 3?

    dfishead
    I have Premiere Elements 4 through 13 on Windows 7 64 bit, and all are working fine.
    You really do not want Premiere Elements 10 on a computer that uses a NVIDIA GeForce video card/graphics card.
    And, 13/13.1 does  not support Windows XP, Windows Vista, or OSX 10.7.
    Do check System Requirement as well as computer resources.
    How far are you getting with the Premiere Elements 3 install on Windows 7 64 bit? Depending on the answer to that question, have you been installing the 3.0.2 Update
    after the 3 install?
    Adobe - Premiere Elements : For Windows : Adobe Premiere Elements 3.0.2 update
    Have you right clicked the desktop icon for the program, if you got that far, and selected Run As Administrator?
    When you are trying to get Premiere Elements 3 on Windows 7 64 bit, are you at least doing that by ignoring the "not compatible" messages and moving onward through
    the installation dialogs as long as it will let you?
    Please review and then let us know the outcome.
    Thank you.
    ATR

  • Does Photoshop Elements work with Windows 8 Touchscreen

    Hi I'm able t use parts of the touchscreen for example, selecting a tool. But, when I try to say use the crop tool I cannot use my finger to expand or contract the crop tool.

    Photoshop Elements only specifically works with touchscreens when it comes to gestures (moving your finger(s) in a specific motion to get a special behavior). Otherwise, the touch screen should act exactly like a mouse. My guess here is that this is simply a question of precision. If you try to "click" and drag a corner of the crop interface, does the crop rectangle move or rotate instead of change size?

  • Will Elements 10 Item #65136385 work with Windows Vista?

    Will Elements 10 Item #65136385 work with Windows Vista? I found this on Amazon.com but it lists operatingsystems only for Windows 7 and I have Vista 64 bit. Can I use this as an upgrade from Elements 7?
    Thnaks.

    Here is the version that does not list Vista as one of it's compatible operating systems
    http://www.amazon.com/Adobe-65136385-Photoshop-Elements-10/dp/B005MMMT6E
    Am I understanding it right....all versions on PSE 10 should work on Vista (as an upgrade frome PSE 7)?
    Thanks.

  • Does photoshop elements 13 work with windows vista?

    I have V10 and a Windows Vista PC that is fast and paid for,
    Thinking of purchasing new software from Adobe.
    Does photoshop elements 13 work with Windows Vista?

    No. Windows 7 or Windows 8.x only.
    System requirements | Adobe Photoshop Elements

  • How do I get my Mac version of Elements 12 work with my epson printer/scanner

    HELP
    How do I get my Mac version of Elements 12 to work with my Epson XP-510 in scanner mode using the get photo's function.
    It does not show the scanner being available even though the scanner works with other programmes and will print direct from organiser to the printer.
    Ron Steele

    You must install the TWAIN driver:
    http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html
    However, it may still not work, since some scanners are not compatible with the 64-bit PSE 12. Epsons have the most problems, unfortunately.

  • I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

    I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

    velma Monreal wrote:
    I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
    Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

  • Lightroom 5.6 "Edit in" with merge won't work with Photoshop Elements 13

    I just installed Photoshop Elements 13 to edit photos from Lightroom. A single file will via "Edit in" will work, but all action on multiple files end in "could not start editor", even though the editor does start, it just won't open up any photos. Photomerge will work from files opened in Photoshop Elements, but i really don't want to organize my catalogue in both programs.
    All combinations of export settings result in the same, i also deleted my settings again and tested it with another account on my computer.

    None of my "Edit In" worked with the pictures in Lightroom for a particular folder. I expanded the 2014 folder and found that two subfolders had a "?" in front of the 2014-07-04" and another. In other words, the folder was missing. After I found the missing folders using the Lightroom "Find Missing Folder" option, I was able to use the "Edit In" menu item. The 2014 folders weren't expanded at first, so I didn't see the ? marks in front of them. With the missing folders, Lightroom's "Edit In" option was basically telling me there was no picture to "Edit In." Howerver, I have Previews and Smart Previews made when I import picture files into Lightroom. So, the "pictures" showed in the slide strip on the bottom, and also in the display in "expand," but it was actually only showing the previews I had built, not the actual missing pictures in the missing folders. I had accidentally moved some directories using Windows Explorer, and I didn't realize my "happy fingers" moved them outside of Lightroom. Of course, Lightroom has no way of knowing I moved them, and just shows the "?" before the missing folder name. After expanding the root folder, then knew what to do. Fixed it easily. It was frustrating, and took about 20 minutes to see the problem. And that fixed the greyed-out "Edit In" Photoshop CC 2014, and all the other plug-ins were greyed out too.
    Hope this fixes your problem.
    Mike

Maybe you are looking for