Workprocesses not connecting to message server
Hi all,
the sapinstance is not comming up after restart.
the problems are
1.R3trance -d return code =0000
2.At SQL prompt> ORA-12154 error coming .
3. trace file for dispatcher.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC6
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, optimized
pid 4072
Mon Sep 15 12:28:59 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4072) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Sep 15 12:29:04 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >H2SEC6_EC6_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05DE0040, size: 4930904)
DpShMCreate: allocated sys_adm at 05DE0040
DpShMCreate: allocated wp_adm at 05DE2090
DpShMCreate: allocated tm_adm_list at 05DE6980
DpShMCreate: allocated tm_adm at 05DE69B0
DpShMCreate: allocated wp_ca_adm at 061F94B0
DpShMCreate: allocated appc_ca_adm at 061FF270
DpShMCreate: allocated comm_adm at 062011B0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06282070
DpShMCreate: allocated gw_adm at 062820B0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 062820E0
DpShMCreate: allocated wall_adm at 062820E8
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
ERROR => DpAsCreate: CreateProcess (3: No such process) [dpntdisp.c 467]
***LOG Q0I=> DpAsCreate, CreateProcess ( CreateProcess 3) [dpntdisp.c 469]
Memory diagnostic *
Systeminformation
Processor-Typ : Intel Pentium Pro
Processor-Count : 8
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 1
NT Pagefile Informations
Config. minimum size : 8388608 K
Config. maximum size : 12582912 K
Avail. maximum size : 12582912 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
8388608 K
12582912 K
12582912 K
8372224 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 0
Commit Charge Total : 5845420 K
Commit Charge Limit : 12382576 K
Commit Charge Peak : 5845452 K
Phys.Memory Total : 54 K
Phys.Memory Available : 92263112 K
File Cache : 17376774 K
Kernel Memory Total : 2084091208 K
Kernel Memory Paged : 0 K
Kernel Memory Nonpaged : 92263140 K
Memory usage of current process
Total virt.address space : 2097024 K
Avail.virt.address space : 735836 K
Private Pages : 0 K
Total heap size : 12947 K
Virtual memory regions : 0 K
Uncommitted heap memory : 6068 K
Allocated heap memory : 6748 K
Moveable heap memory : 0 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
592
sapstartsrv.exe
16188 K
16204 K
19096 K
19120 K
4
3832
msg_server.EXE
[MS] EC6_01
7752 K
7752 K
10316 K
10316 K
1
984
enserver.EXE
[**] EC6_01
13644 K
13644 K
53448 K
53448 K
3
1484
msg_server.EXE
[MS] EC6_00
8160 K
8160 K
10696 K
10696 K
2
4072
disp+work.EXE
31972 K
32032 K
67548 K
67652 K
7
1860
igswd.EXE
[**] EC6_00
2612 K
2860 K
1484 K
1756 K
0
Sum
80328 K
162588 K
DP_FATAL_ERROR => Gateway could not be started - I better exit now
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 12:29:14 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Sep 15 06:59:14 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA -1 Run no 0 0 0
1 DIA -1 Run no 0 0 0
2 DIA -1 Run no 0 0 0
3 DIA -1 Run no 0 0 0
4 DIA -1 Run no 0 0 0
5 DIA -1 Run no 0 0 0
6 UPD -1 Run no 0 0 0
7 ENQ -1 Run no 0 0 0
8 BTC -1 Run no 0 0 0
9 BTC -1 Run no 0 0 0
10 BTC -1 Run no 0 0 0
11 SPO -1 Run no 0 0 0
12 UP2 -1 Run no 0 0 0
Dispatcher Queue Statistics Mon Sep 15 06:59:14 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Mon Sep 15 06:59:14 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Sep 15 06:59:14 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 12:29:19 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >H2SEC6_EC6_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
[DpWpDied] W0 handle not set (PID:-1)
[DpWpDied] W1 handle not set (PID:-1)
[DpWpDied] W2 handle not set (PID:-1)
[DpWpDied] W3 handle not set (PID:-1)
[DpWpDied] W4 handle not set (PID:-1)
[DpWpDied] W5 handle not set (PID:-1)
[DpWpDied] W6 handle not set (PID:-1)
[DpWpDied] W7 handle not set (PID:-1)
[DpWpDied] W8 handle not set (PID:-1)
[DpWpDied] W9 handle not set (PID:-1)
[DpWpDied] W10 handle not set (PID:-1)
[DpWpDied] W11 handle not set (PID:-1)
[DpWpDied] W12 handle not set (PID:-1)
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4072) [dpxxdisp.c 10421]
Good Bye .....
Please help
Sudhakarareddy
Hi,
If possible to restart the server and check it.
some times buffer not clear.
Regards,
Anil
Similar Messages
-
Dispatcher running but not connected to message server :( please help .
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid DEV
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3744
Mon Oct 26 12:37:38 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3744) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Mon Oct 26 12:37:50 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0211.qqq.nxst) took 12 seconds
Mon Oct 26 12:38:06 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >noptqas_DEV_00 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 16383MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 16384MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 4095 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
Mon Oct 26 12:38:07 2009
***LOG Q0K=> DpMsAttach, mscon ( noptqas) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >noptqas_DEV_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
Mon Oct 26 12:38:47 2009
ERROR => DpHdlDeadWp: W0 (pid 276) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 5532) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 3696) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 4928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 6040) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 3892) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 3860) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4564) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W8 (pid 3940) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W9 (pid 3288) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W10 (pid 5136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W11 (pid 5128) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W12 (pid 4452) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4680) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W14 (pid 5664) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W15 (pid 5540) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W16 (pid 4312) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=309
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Oct 26 12:38:57 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Oct 26 07:08:57 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 276 Ended no 1 0 0
1 DIA 5532 Ended no 1 0 0
2 DIA 3696 Ended no 1 0 0
3 DIA 4928 Ended no 1 0 0
4 DIA 6040 Ended no 1 0 0
5 DIA 3892 Ended no 1 0 0
6 DIA 3860 Ended no 1 0 0
7 DIA 4564 Ended no 1 0 0
8 DIA 3940 Ended no 1 0 0
9 DIA 3288 Ended no 1 0 0
10 UPD 5136 Ended no 1 0 0
11 ENQ 5128 Ended no 1 0 0
12 BTC 4452 Ended no 1 0 0
13 BTC 4680 Ended no 1 0 0
14 BTC 5664 Ended no 1 0 0
15 SPO 5540 Ended no 1 0 0
16 UP2 4312 Ended no 1 0 0
Dispatcher Queue Statistics Mon Oct 26 07:08:57 2009
===========================
SiSelNRemove: removed sock 196 (pos=2)
SiSelNRemove: removed sock 196
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 196
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3744) [dpxxdisp.c 10421]
Good Bye .....
Thanks in advance
Shakeel.Please check this forums subject. It is SAP Business One System Administration - dedicate to SAP Business One System only.
Close your thread and post to a proper forum. To make other members read your message easily, at least some line breaks are needed in your message.
Thanks,
Gordon -
SAP MMC Says Dispatcher running but not connected to message server
I installed the ABAP Stack Sneak Preview Netweaver.I see all the relevant NSP entries in my Services file.But when i disconnect my internet I see in SAP MMC that Disptacher says its running but not connected Message Server(turns yellow) and also the SAP gets logged off. Is Internet connection required for running NSP(ABAP System SID)??
If I want to get rid of this internet dependency what settings i need to change ??
My current Message trace file says as follows..
Trace File of Message Server
trc file: "dev_ms", trc level: 1, release: "640"
[Thr 4516] Mon Sep 26 21:51:06 2005
[Thr 4516] systemid 560 (PC with Windows NT)
[Thr 4516] relno 6400
[Thr 4516] patchlevel 0
[Thr 4516] patchno 43
[Thr 4516] intno 20020600
[Thr 4516] pid 4512
[Thr 4516] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4512) [msxxserv.c 1661]
[Thr 4516] Mon Sep 26 21:51:07 2005
[Thr 4516] MsHttpInit: full qualified hostname = sai
[Thr 4516] HTTP logging is switch off
[Thr 4516] set HTTP state to LISTEN
[Thr 4516] *** I listen to port sapmsNSP (3600) ***
[Thr 4516] *** HTTP port 8100 state LISTEN ***
[Thr 4516] CUSTOMER KEY: >K0201639721<
[Thr 4516] Mon Sep 26 21:52:46 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 4516] Mon Sep 26 21:52:50 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
Looking for your valuable solutions.. Will definitely reward good points if gets solved
Thanks
Sreeni.There is now also a Weblog about https://weblogs.sdn.sap.com/pub/wlg/2479 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken].
Regards
Gregor -
Disp+work.exe Running but not connected to Message server
Dear All,
I install SAP NetWeaver 7.0 ABAP Trial Version on my PC (Win XP SP2, Proc 2.4 GHZ, RAM 1 GB) installation success, but when I start the application server through mmc the dispatcher failed to start.
I've tried to restart my machine, the problem still there.....
Please help me to fix this problem...
Thanks.
EndiI got the same error, anyone can help ???
-
Cannot connect to message server
Hi,
I have integrate a BSP Application from a sap ERP system in my portal !
After I checked this BSP, my ICM from my SAP ERP system failed : Server Overload !
I tried to restart the SAP system and know I have this error in the mmc :
disp+work.exe Running but not connected to Message Server !
In my dev_disp file :
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
***LOG Q0F=> DpLoopInit, nomstry () [dpxxdisp.c 1704]
ERROR => Connection to Message Server failed - check installation [dpxxdisp.c 1705]
In my std_server0.out :
Framework started for 151840 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel March 04, 2006 16:23 GMT
>
Login :
SAP J2EE Engine Version 7.00 PatchLevel is shutting down! PatchLevel March 04, 2006 16:23 GMT
Stopping services.
Service jmsconnector stopped. (0 ms)
Service sld stopped. (0 ms)
Service com.adobe~TrustManagerService stopped. (31 ms)
Service com.adobe~DocumentServicesConfiguration stopped. (16 ms)
Service tcsecwssec~service stopped. (0 ms)
Service tc.CBS.Service stopped. (0 ms)
Service com.adobe~DocumentServicesDestProtoService stopped. (15 ms)
Service pmi stopped. (47 ms)
Service tcsecvsi~service stopped. (0 ms)
Service tcsecdestinations~service stopped. (0 ms)
Service tcsecsecurestorage~service stopped. (0 ms)
Service adminadapter stopped. (0 ms)
Service monitor stopped. (20000 ms) - Timeout expired.
Service com.adobe~LicenseService stopped. (0 ms)
In my std_dispatcher.out
Framework started for 46754 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel March 04, 2006 16:23 GMT
>
Login :[ParNew 159114K->11211K(557952K), 0.3431082 secs]
[Full GC[Unloading class sun.reflect.GeneratedMethodAccessor17]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor5]
[Unloading class sun.reflect.GeneratedMethodAccessor15]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor12]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor2]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor8]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor9]
[Unloading class sun.reflect.GeneratedMethodAccessor5]
[Unloading class sun.reflect.GeneratedMethodAccessor24]
[Unloading class sun.reflect.GeneratedMethodAccessor14]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor11]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor3]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor10]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor7]
[Unloading class sun.reflect.GeneratedMethodAccessor10]
[Unloading class sun.reflect.GeneratedMethodAccessor11]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor4]
[Unloading class sun.reflect.GeneratedMethodAccessor3]
[Unloading class sun.reflect.GeneratedMethodAccessor7]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor1]
[Unloading class sun.reflect.GeneratedMethodAccessor21]
[Unloading class sun.reflect.GeneratedMethodAccessor25]
[Unloading class sun.reflect.GeneratedMethodAccessor20]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor13]
[Unloading class sun.reflect.GeneratedMethodAccessor12]
[Unloading class sun.reflect.GeneratedMethodAccessor26]
[Unloading class sun.reflect.GeneratedMethodAccessor6]
[Unloading class sun.reflect.GeneratedMethodAccessor29]
[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor6]
[Unloading class sun.reflect.GeneratedMethodAccessor22]
[Unloading class sun.reflect.GeneratedMethodAccessor28]
[Unloading class sun.reflect.GeneratedMethodAccessor9]
[Unloading class sun.reflect.GeneratedMethodAccessor27]
[Unloading class sun.reflect.GeneratedMethodAccessor23]
[Unloading class sun.reflect.GeneratedMethodAccessor13]
[Unloading class sun.reflect.GeneratedMethodAccessor8]
[Unloading class sun.reflect.GeneratedMethodAccessor16]
11211K->10224K(557952K), 0.5038284 secs]Can you help help me, please.
Thank you.
Best regards,
Mathieu -
Logon balancing error:cannot connect to message server (rc=9)
Hi Gurus,
I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system.
I am now able to see the servers in the logon pad but not able to login .
When i try clicking the logon i am getting the below error message "
"Logon balancing error:cannot connect to message server (rc=9)"
Then further expanding the message i am getting the below message
" Error: Server '?' unknown
Tue Mar 02 11:51:05 2010
Release 710
Component NI (Network Interface), Version 39 rc =-3 , Detail NiErrSet. "
Can you please help me out in accessing the servers.
Regards
VikramCheck OSS Note : 882741
Summary
Symptom
Some users cannot longer connect SAP GUI to any SAP systems e.g. via SAP Logon, SAPShortcut etc. although they have not made any update to either SAP GUI or SAP system. The attempt to connect to the SAP system ends with error messages like this: "Logon balancing error: could not connect to message server (rc=9)", "service sapmsXXX unknown" or "service sapdp## unknown".
The detailed error information is as follows:
Error: service 'sap...' unknown
Component NI (network interface), ...
rc = -3, module ninti.c, line 463
Detail NiPGetServByName: service 'sap...' not found
System Call getservbyname
Other terms
service sapmsXXX unknown,logon balancing,service sapdp## not found error,etc/services,drivers\etc\services,getservbyname, sapdpxx
MSN Messenger 7.5,Connection Troubleshooter
Reason and Prerequisites
The reason for this malfunction is, that the datatype of the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
was changed from REG_EXPAND_SZ to REG_SZ.
The following programs are currently known to cause this registry change:
Starting MSN Messenger 7.5 "Connection Troubleshooter" (Build 7.5.0299).
Installation of MSN Messenger 7.0 or MSN Messenger 7.5 with the option automatic scanning and configuration of ports.
This modification prevents the expansion of environment variables in the value of the parameter. Therefore,
%SystemRoot%\system32\drivers\etc
is not translated to
c:\windows\system32\drivers\etc
and the services database is not found by the API function getservbyname().
If you have checked the datatype of registry value DatabasePath and it is REG_EXPAND_SZ, apply SAP Note 52959 to check the appropriate settings in the services file.
Solution
Start the registry editor and rename the registry value HKLM\System\CurrentControlSet\Services\TCPIP\Parameters\DatabasePath
Create an Expandable-String Value (REG_EXPAND_SZ) with the same name and value.
If more PCs are affected, you can export the correct value to a .reg file and import the .reg to other PCs.
If you have the same problem although you have not installed Microsoft MSN Messenger 7.5, create a customer message, collect the following information and attach it to the message according to note 541726 or upload it to sapservX (see note 40024):
Scan your workstations for spyware and viruses with up-to-date virus definitions. If you already did that what was the result ?
What software has been installed recently ? (client software, Firewall)
Create a registry export of the following key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstallon the affected and the unaffected PC respectively and attach the two .reg files to the customer message.
Are the users on the affected workstations logged on with administrative credentials (local administrator ) ?
Create an MPS Report Networking and Setup Perf of an affected workstation so that we can check if they use an software in common.
You can download the Networking MPS Reporting Tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network.exe
You can find a short description about the features of the tool at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_Network_Readme.txt
The Setup Perf MPS Reporting Tool is located at:
http://download.microsoft.com/download/b/b/1/bb139fcb-4aac-4fe5-a579-30b0bd915706/MPSRPT_SETUPPerf.EXE
Run this report too on identically configured workstations, which are not affected.
If you have already changed back the DatabasePath parameter and if after a while the value was switched back to REG_SZ perform the following steps to help us to identify the reason for this problem:
Switch the datatype back to REG_EXPAND_SZ
Download Regmon from http://www.sysinternals.com on the affected machines
Enable auditing on the affected clients
Modify the settings of the eventlog so that no important entry is deleted!
Open Regedit and highlight HKLM\System\CCS\Services\TCPIP\Parameters
Right-click on "Parameters" and choos "Permissions" and click "Advanced".
Choose "Auditing" and "Add".
Add "Everyone" and select "this key only" under "Apply onto".
Check the boxes "Set Value" and "Delete" and click "OK".
Apply these settings
Start Regmon and apply the correct filter settings:
Press the "magnifying glass" button to stop the monitoring.
Press the rubber button to delete all logged entries.
Go to "Options Filter/Highlight".
Copy the following value to the include field: tcpip\parameters\databasepath and click "Apply".
Start Regmon by pressing the magnifying glass button
Verify that logging starts when you double-click the TCPIP Key in regedit!
If the datatype will be changed again, provide us the output of the monitoring tools.
Solution provided by Microsoft
This issue is said to be fixed as of build 7.5.0311 of MSN messenger. -
Dispatcher running but unable to connect to message server
Hi all,
I have installed ECC 6.0 EHP 4 on MAXDB 7.7.
After doing post steps and installing license I did local client copy, client copy stuck in between and I noticed that session hanged so I opened a new session and found that I was not able to run and t-code and and unable to login to the server although login screen appears( Login process continues but no result).
I realized the data or log directory may be filled up, so I checked and that was not the issue.
So I restarted the Server.
Now I am unable to see the login screen too and in SAP MMC dispatcher is yellow "Running but not connected to message server".
R3trans result is below
R3trans -d
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
r3trans finished (0012)
I am new to MAXDB database.
I installed database manager and checked the data folder status and find there is enough free space but log directory is 100% so i created new volume for log directory (not sure if any thing else is required to activate it, asl its still showing log directory 100% usage).
dev_ms log is as below
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 2632] Wed Sep 29 16:26:35 2010
[Thr 2632] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 562 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 11
intno 20020600
make: multithreaded, Unicode, 64 bit, optimized
pid 2788
[Thr 2632] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2788) [msxxserv.c 1853]
[Thr 2632] load acl file = D:\usr\sap\DEV\SYS\global\ms_acl_info.DAT
[Thr 2632] MsGetOwnIpAddr: my host addresses are :
[Thr 2632] 1 : [192.168.1.4] raddev (HOSTNAME)
[Thr 2632] 2 : [127.0.0.1] raddev (LOCALHOST)
[Thr 2632] MsHttpInit: full qualified hostname = raddev
[Thr 2632] HTTP logging is switch off
[Thr 2632] set HTTP state to LISTEN
[Thr 2632] ms/icf_info_server : deleted
[Thr 2632] *** I listen to port sapmsDEV (3600) ***
[Thr 2632] *** I listen to internal port 3900 (3900) ***
[Thr 2632] *** HTTP port 8100 state LISTEN ***
[Thr 2632] CUSTOMER KEY: >W0104018144<
[Thr 2632] build version=701.2008.03.06
[Thr 2632] Wed Sep 29 16:37:07 2010
[Thr 2632] *** ERROR => MsSCheckConnections: no response from client C1 (raddev_DEV_00) after 300 secs received [msxxserv.c 3205]
[Thr 2632] *** ERROR => MsSCheckConnections: disconnect now [192.168.1.4] [msxxserv.c 3209]
please reply...
Regards
VinayHi Sunil,
Here is the trans.log
4 ETW000 r3trans version 6.14 (release 701 - 26.01.09 - 12:46:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 06.10.2010 - 14:11:50
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Oct 06 14:11:50 2010 5087 0.005087
4 ETW000 [dev trc ,00000] db_con_init called 40 0.005127
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 6818 0.011945
4 ETW000 [dev trc ,00000] Loading DB library 'dbsdbslib.dll' ... 45 0.011990
4 ETW000 [dev trc ,00000] load shared library (dbsdbslib.dll), hdl 0, addr 0000000186C80000
4 ETW000 59114 0.071104
4 ETW000 [dev trc ,00000] using "D:\usr\sap\DEV\SYS\exe\uc\NTAMD64\dbsdbslib.dll"
4 ETW000 21 0.071125
4 ETW000 [dev trc ,00000] Library 'dbsdbslib.dll' loaded 17 0.071142
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dbsdbslib.dll
4 ETW000 9745 0.080887
4 ETW000 [dev trc ,00000] Wed Oct 06 14:11:51 2010 3372 0.084259
4 ETW000 [dev trc ,00000] Version of 'dbsdbslib.dll' is "700.08", patchlevel (0.24)
4 ETW000 20 0.084279
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dbsdbslib.dll
4 ETW000 22 0.084301
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dbsdbslib.dll
4 ETW000 229 0.084530
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 455 0.084985
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=39,arg_p=0000000000000000)
4 ETW000 27 0.085012
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 189 0.085201
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=000000000202F950)
4 ETW000 26 0.085227
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 14 0.085241
4 ETW000 [dev trc ,00000] New connection 0 created 15 0.085256
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 36 0.085292
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=-1,command=10,arg_p=0000000141461DE8)
4 ETW000 34 0.085326
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 14 0.085340
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 16 0.085356
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 20 0.085376
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 40 0.085416
4 ETW000 [dev trc ,00000] { DbSlSdbConnect(con_info_p=0000000000000000) 26 0.085442
4 ETW000 [dev trc ,00000] DBSDBSLIB : version 700.08, patch 0.024 (Make PL 0.32)
4 ETW000 490 0.085932
4 ETW000 [dev trc ,00000] MAXDB shared library (dbsdbslib) patchlevels (last 10)
4 ETW000 23 0.085955
4 ETW000 [dev trc ,00000] (0.024) Default value for max. input variables is 2000 (note 655018)
4 ETW000 25 0.085980
4 ETW000 [dev trc ,00000] (0.024) Profile parameter to define max. input variables (note 655018)
4 ETW000 23 0.086003
4 ETW000 [dev trc ,00000] (0.024) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
4 ETW000 23 0.086026
4 ETW000 [dev trc ,00000] (0.024) Input parameters for SQL statements increased (note 655018)
4 ETW000 23 0.086049
4 ETW000 [dev trc ,00000] (0.018) Create index serial for MaxDB 7.6 (note 1267841)
4 ETW000 21 0.086070
4 ETW000 [dev trc ,00000] (0.018) More trace in case of packed to string conversion error (note 1262799)
4 ETW000 24 0.086094
4 ETW000 [dev trc ,00000] (0.016) R3trans export aborts with signal 6 (note 1262245)
4 ETW000 22 0.086116
4 ETW000 [dev trc ,00000] (0.009) IA64 alignment errors (note 1245982) 15 0.086131
4 ETW000 [dev trc ,00000] (0.007) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
4 ETW000 23 0.086154
4 ETW000 [dev trc ,00000] 12 0.086166
4 ETW000 [dev trc ,00000] -> init() 180 0.086346
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=14) : 0000000002678000 (30 bytes allocated)
4 ETW000 45 0.086391
4 ETW000 [dev trc ,00000] STATEMENT_CACHE_SIZE = 1000 466 0.086857
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=152000) : 0000000003E1CFD0 (152046 bytes allocated)
4 ETW000 198 0.087055
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=656000) : 0000000003E421B0 (808062 bytes allocated)
4 ETW000 30 0.087085
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=288000) : 0000000004E00080 (1096078 bytes allocated)
4 ETW000 37 0.087122
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=16144) : 0000000003EE2450 (1112238 bytes allocated)
4 ETW000 30 0.087152
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=32048) : 0000000003EE6380 (1144302 bytes allocated)
4 ETW000 29 0.087181
4 ETW000 [dev trc ,00000] -> loadClientRuntime() 515 0.087696
4 ETW000 [dev trc ,00000] Loading SQLDBC client runtime ... 18 0.087714
4 ETW000 [dev trc ,00000] SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
4 ETW000 6587 0.094301
4 ETW000 [dev trc ,00000] SQLDBC Library Version : libSQLDBC 7.6.5 BUILD 015-123-202-938
4 ETW000 55 0.094356
4 ETW000 [dev trc ,00000] SQLDBC client runtime is MaxDB 7.6.5.015 CL 202938
4 ETW000 302 0.094658
4 ETW000 [dev trc ,00000] SQLDBC supports new DECIMAL interface : 0 253 0.094911
4 ETW000 [dev trc ,00000] SQLDBC supports VARIABLE INPUT data : 1 17 0.094928
4 ETW000 [dev trc ,00000] SQLDBC supports keepAlive indicator : 0 16 0.094944
4 ETW000 [dev trc ,00000] -> getNewConnection() 14 0.094958
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=1672) : 0000000004E46750 (1145990 bytes allocated)
4 ETW000 36 0.094994
4 ETW000 [dev trc ,00000] -> sdb_malloc(size=608) : 0000000004E4ADF0 (1146614 bytes allocated)
4 ETW000 53 0.095047
4 ETW000 [dev trc ,00000] <- getNewConnection(con_hdl=0) 44 0.095091
4 ETW000 [dev trc ,00000] -> checkEnvironment(con_hdl=0) 22 0.095113
4 ETW000 [dev trc ,00000] -> connect() 200 0.095313
4 ETW000 [dev trc ,00000] INFO : SQLOPT= -I 0 -t 0 -S SAPR3 62 0.095375
4 ETW000 [dev trc ,00000] Try to connect (DEFAULT) on connection 0 ... 63 0.095438
4 ETW000 [dbsdbsql ,00000] *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:[1] could not create comm. shared memory [5]))
4 ETW000 106621 0.202059
4 ETW000 [dev trc ,00000] -> SetSapdbCA(errcode=-10709) 20 0.202079
4 ETW000 [dev trc ,00000] -> freeConnection(con_hdl=0) 20 0.202099
4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000004E4ADF0, size=608 (1145990 bytes allocated))
4 ETW000 48 0.202147
4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000004E46750, size=1672 (1144302 bytes allocated))
4 ETW000 44 0.202191
4 ETW000 [dev trc ,00000] } DbSlSdbConnect(rc=99) 17 0.202208
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error -10709 performing CON [dblink#3 @ 431]
4 ETW000 8805 0.211013
4 ETW000 [dblink ,00431] ***LOG BY0=>Connection failed (RTE:[1] could not create comm. shared memory [5]) [dblink#3 @ 431]
4 ETW000 29 0.211042
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=41,arg_p=0000000140519908)
4 ETW000 315 0.211357
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 19 0.211376
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=14,arg_p=0000000002025EF0)
4 ETW000 24 0.211400
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 14 0.211414
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=50,arg_p=0000000002025FB0)
4 ETW000 24 0.211438
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 24 0.211462
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=13,arg_p=0000000002025F00)
4 ETW000 24 0.211486
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 19 0.211505
4 ETW000 [dev trc ,00000] { DbSlSdbControl(con_hdl=0,command=52,arg_p=0000000002025F50)
4 ETW000 24 0.211529
4 ETW000 [dev trc ,00000] } DbSlSdbControl(rc=0) 13 0.211542
2EETW169 no connect possible: "DBMS = ADABAS D --- DBNAME = ''"
4 ETW000 [dev trc ,00000] -> sdb_free(p=0000000002678000, size=14 (1144272 bytes allocated))
4 ETW000 10444 0.221986
Regards
Vinay -
IPad2- cannot open page, Safari cannot open the page because it could not connect to the server? Internet works but this message continues to pop up. My iPhone works fine and iPad has been working great until a few days ago.
Message is almost acting like a pop up.Hi
I constantly get same message. When I open up my windows laptop all works fine so I guess it's a bug that apple refuse to admit to. -
one day i loggged on and all it said was acssecing itunes store but never got there. then a message came up saying "could not connect to itunes server. check your connection and try again later". what should i do?
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Error Message: -1 Can not connect to the server is the message I get?
I am getting a -1 error message that it can not connect to the server when I am trying to use the apps on my Photosmart 6510 e-all-in-one series. If someone can please help me fix this I will greatly appreciate it.
Hi there spicygirlbowtiq,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
I cannot get email and the message says the device is not connected to the server
I cannot get email and the message says the device is not connected to the server. How can I resolve this issue?
Hey there Chen_erping,
Thank you for asking your question! It sounds like you are unable to send or recieve email from the account you setup in the Mail app on your iPad. I want to recommend the troubleshooting steps outlined in the following article:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
Messages not connecting to the server
My messages account (on a Moutain Lion Mac) is not connecting to the server or something because I am not able to sign in. I am entering the correct password but it just keeps asking me for it again. Please help!
Hello jannawbn,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Have a nice day,
Mario -
My ipad will not connect tot he server when trying to access my mail. This has been happening since last Sunday. Some have said it is due to the latest software update. I am able to connect to the internet.
I am not having this issue on iPhone.
I checked all the settings, the wireless router in my house and at work.
I have completed a hard reset of the device.
I had our IT guy at work look at it.
He said to contact Apple....
Any thoughts?
Thanks!iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say “Cannot Connect to Server”?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
Gmail Account Will Not Connect to Gmail Server
http://support.apple.com/kb/ts3058
Error: “Server Unavailable” when accessing Yahoo on iOS devices
https://help.yahoo.com/kb/mobile-mail/error-server-unavailable-accessing-yahoo-i os-devices-sln8834.html?impressions=true
Unable to Delete eMail Messages
http://support.apple.com/kb/TS2475
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to delete ALL mail messages from iPhone/iPad in one step
http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
How to Attach Photos and Videos to Emails on an iPhone or iPad
http://www.wikihow.com/Attach-Photos-and-Videos-to-Emails-on-an-iPhone-or-iPad
iPad Basics: Sending an Email With An Attachment
http://ipadacademy.com/2012/03/ipad-basics-sending-an-email-with-an-attachment
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Send Multiple email Attachments from your iPad or iPhone
http://ipadacademy.com/2014/03/how-to-send-multiple-email-attachments-from-your- ipad-or-iphone
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
Importing a Contact List CSV to the iPad
http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email! Mail Client with Attachments and Cloud Services
https://itunes.apple.com/app/group-email!-mail-client-attachments/id380690305?mt =8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
How to delete an email account on your iPad
http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
Cheers, Tom -
Since 29/10/2012 my iphone 4s and more recently my ipad 3 will not connect to the server when trying to access my email account. All I get is an error message saying that 'cannot get mail, connection to the server failed' I hadnt changed any settings it just happened. I have since done a complete re-boot on the ipad but to no avail. Anybody got any suggestions?
No. Everything was working fine and then it wasn't. I hadn't changed any settings or switched either one off. When the phone stopped working properly I ignored it because I always have my ipad with me but that just sopped working properly and now I am stuffed. I have tried most solutions suggested on here even wiping the ipad clean and re-booting. I did this exactly the same way as when I first got it but still no joy. The same with the phone.
-
I've set up Replication (transactional replication) between two remote servers. On the one of server that I configure Distribution & publication .another server is subscription. The subscription is all set & snapshot agent is started .but the actual
replication doesn't take place.
When viewing the Synchronization Status of the subscription, i get an error, saying "The process could not connect to Subscriber ‘Server name'."
Clicking on start, this is the error message I get:
The agent could not be started.
Additional information:
An exception while executing a Transact-SQL statement or batch.
SQL Server Agent Error: Request to run job Server1-EDUSRV-Pubs-Server2-14 (from User Server1\Administrator) refused because the job is already running from a request by User sa.
Change database context to 'EDUSRV'.(Microsoft SQL Server Error:22022)
What can i do?
Please help me.ThanksThe error The process could not connect to Subscriber 'Server name' indicates that the Distribution Agent process account does not have enough permissions to connect to the Subscriber.
If this is a push subscription, verify the Distribution Agent process account is db_owner in the distribution and subscription databases, is a member of the PAL, and has read permissions on the snapshot share.
If this is a pull subscription, verify the Distribution Agent process account is db_owner in the subscription database, is a member of the PAL, and has read permissions on the snapshot share.
The permissions required are covered in
Replication Agent Security Model.
If you have anymore questions, please let me know. I hope this helps.
Brandon Williams (blog |
linkedin)
Maybe you are looking for
-
Open Items Management for B/S Account
Hi Friends, I have a b/s account in which open items management is turned off[unchecked], We have already made postings to that account, Now when I try to turn it on, it gives me error message that balance needs to be zero to change the status of ope
-
About two years ago you clarify my doubts about diversity, but today after seeing a hyperlink patch antenna data sheet, a doubt came to my mind, what if both antennas are identical and cover the same cell but with a little difference, the polarizatio
-
Hallo, I have a question about the policy mapping in ACS 5.4. When a request matches in "Access Selection Rule" the request goes to an "Access Service". In "Access Service" there are three kinds of policy rules: - Identity: If condition match then re
-
1. What is difference between WCF REST SERVICE(and not WCF) and WebAPI? 2. When we should one over another? Deepak Talele Ph: 91-9158413830 Email: [email protected], [email protected]
-
I have an HP Pavilion running Vista Home Premium. 64 x 2 Dual Core processor 5600+, 3GB ram. I am trying to install the Creative Suite 4. When I place the first DVD in, it does not prompt me for the serial number, it instead asks what I want installe