Workspace customized dashboards: Error in the operation

Hello
i'm trying to figure out more about what can be done with the workspace dashboards and while i try to configure new graphics, after aplying the changes i sometimes see a popup:
"Error:
Error in the operation"
(or something like that, the software is installed in portuguese). This is all the popup message says.
This mesage also occurs when, from a graphic in one of the pannels, i try to communicate with a process list. I have the communication configured, but when i click in one area of the graphic pie it returns this very same error instead of drilling down the process on the list for me.
Where can i find more detailed information about the real error?
Thank you in advance.
Edited by: user1997568 on 21/10/2010 09:42

Download the patch from Oracle support..

Similar Messages

Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message "The operation can't be completed because an item with the name .DS_Store already exists"

Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message "The operation can't be completed because an item with the name .DS_Store already exists".
The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
All file types are susceptible
the HDs are all Mac OS X formatted, no foreign file formats involved
the HDs are all journal-enabled, OS X extended formats
have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
any ideas anyone?
would appreciate any thoughts or sugestions, this has got me beat
the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
many thanks for any suggestions

This is definitively a nuisance. When copying large amounts of files between volumes try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
gunnars-mac-mini-i7:Volumes gunnar$ man ditto
NAME
 ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
 ditto [-v] [-V] [-X] [<options>] src ... dst_directory
 ditto [-v] [-V] [<options>] src_file dst_file
 ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
 ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
 ditto -h | --help

Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

This is what is happening after installing 2010 on to a computer that was running 2007 Outlook. Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
error. Then a pop up dialog box comes up with the following error
Receiving reported error (0x80004005): The operation failed
Does anyone know how to fix this
Nexusxox

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing. Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

IMovie error message "The operation could not be completed"

I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
Any suggestions?
Thanks

My problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder. Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with.

Error (23317) The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks. Recommended Action The operation Change properties of virtual machine is not permitted on a virtual machine that h

Experts !
Error (23317)
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Recommended Action
The operation Change properties of virtual machine is not permitted on a virtual machine that has shared virtual hard disks.
Is this limitation by design? If we have a shared VHDX between two VMs, then I am not able to change the VM properties from SCVMM.
SCVMM 2012 R2 with Windows Server 2012 R2 Hyper-V.
Appreciate any help !
Optimism is the faith that leads to achievement. Nothing can be done without hope and confidence.
InsideVirtualization.com

Hello,
that is a VMM issue.
If you did not deploy your virtual cluster from a VMM service template, VMM doesn't recognize the configuration.
Until MS got it fixed, you could use the workaround from system center central:
http://www.systemcentercentral.com/tag/shared-vhdx/
This posting is provided >AS IS< with no warranties.

Bridge Crashing: Error message "The operation could not be completed. The file is Locked

Bridge is acting real funny lately: It won't close, so I have to force quite, then I get the error message: "The operation could not be completed. The file is Locked"

Thread 7:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 com.adobe.bridge5 0x0000000100671cf8 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 83992
2 com.adobe.bridge5 0x00000001006ae71e boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 332350
3 com.adobe.bridge5 0x00000001004d2c99 start + 5045481
4 com.apple.CoreServices.CarbonCore 0x000000010b28c8dc PrivateMPEntryPoint + 58
5 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
6 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
7 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 8:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 com.adobe.bridge5 0x0000000100671cf8 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 83992
2 com.adobe.bridge5 0x000000010066b372 boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 56978
3 com.adobe.bridge5 0x000000010066939d boost::exception_detail::error_info_injector<boost::thread_resource_error>::~error_info_i njector() + 48829
4 com.adobe.bridge5 0x00000001004d2c99 start + 5045481
5 com.apple.CoreServices.CarbonCore 0x000000010b28c8dc PrivateMPEntryPoint + 58
6 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
7 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
8 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 9:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 SwitchBoardClient 0x000000011ebce948 void boost::condition_variable_any::wait<boost::unique_lock<boost::mutex> >(boost::unique_lock<boost::mutex>&) + 80
2 SwitchBoardClient 0x000000011ebc2cc8 adobe::switchboard::ConnectionQueue::run() + 300
3 SwitchBoardClient 0x000000011ebc78a3 boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>::operator()(adobe::switchboard::ConnectionQueue*) const + 97
4 SwitchBoardClient 0x000000011ebc7911 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>&, boost::_bi::list0&, int) + 65
5 SwitchBoardClient 0x000000011ebc794e boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> > >::operator()() + 54
6 SwitchBoardClient 0x000000011ebc796c boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::ConnectionQueue>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::ConnectionQueue*> > > >::run() + 28
7 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
8 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
9 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
10 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 10:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 SwitchBoardClient 0x000000011eb66a41 boost::condition_variable::wait(boost::unique_lock<boost::mutex>&) + 59
2 SwitchBoardClient 0x000000011eb89433 adobe::switchboard::Client::run() + 111
3 SwitchBoardClient 0x000000011eb91e05 boost::_mfi::mf0<void, adobe::switchboard::Client>::operator()(adobe::switchboard::Client*) const + 97
4 SwitchBoardClient 0x000000011eb91e49 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Client>&, boost::_bi::list0&, int) + 65
5 SwitchBoardClient 0x000000011eb91e86 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> > >::operator()() + 54
6 SwitchBoardClient 0x000000011eb91ea4 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Client>, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Client*> > > >::run() + 28
7 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
8 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
9 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
10 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 11:
0 libsystem_kernel.dylib 0x000000010a98e36a __recvmsg + 10
1 SwitchBoardClient 0x000000011eba0b93 unsigned long boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::receive<boost::asio::mutable_buffers_1>(boost::asio::detail::reactive_socket_service >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 537
2 SwitchBoardClient 0x000000011eba0d08 unsigned long boost::asio::stream_socket_service<boost::asio::ip::tcp>::receive<boost::asio::mutable_bu ffers_1>(boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 58
3 SwitchBoardClient 0x000000011eba0d42 unsigned long boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> >::read_some<boost::asio::mutable_buffers_1>(boost::asio::mutable_buffers_1 const&, boost::system::error_code&) + 56
4 SwitchBoardClient 0x000000011eba1dbb adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::runOne(boost::shared_ptr<adobe::switchboard::Connection<boost::asio::basic_stream_sock et<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&) + 185
5 SwitchBoardClient 0x000000011eba2063 adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::run() + 69
6 SwitchBoardClient 0x000000011eb91cd5 boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >::operator()(adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio ::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*) const + 97
7 SwitchBoardClient 0x000000011eb91d19 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&, boost::_bi::list0&, int) + 65
8 SwitchBoardClient 0x000000011eb91d56 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > >::operator()() + 54
9 SwitchBoardClient 0x000000011eb91d74 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > > >::run() + 28
10 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
11 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
12 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
13 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 12:
0 libsystem_kernel.dylib 0x000000010a98e36a __recvmsg + 10
1 SwitchBoardClient 0x000000011eba0b93 unsigned long boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::receive<boost::asio::mutable_buffers_1>(boost::asio::detail::reactive_socket_service >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 537
2 SwitchBoardClient 0x000000011eba0d08 unsigned long boost::asio::stream_socket_service<boost::asio::ip::tcp>::receive<boost::asio::mutable_bu ffers_1>(boost::asio::detail::reactive_socket_service<boost::asio::ip::tcp, boost::asio::detail::kqueue_reactor<false> >::implementation_type&, boost::asio::mutable_buffers_1 const&, int, boost::system::error_code&) + 58
3 SwitchBoardClient 0x000000011eba0d42 unsigned long boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> >::read_some<boost::asio::mutable_buffers_1>(boost::asio::mutable_buffers_1 const&, boost::system::error_code&) + 56
4 SwitchBoardClient 0x000000011eba1dbb adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::runOne(boost::shared_ptr<adobe::switchboard::Connection<boost::asio::basic_stream_sock et<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&) + 185
5 SwitchBoardClient 0x000000011eba2063 adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >::run() + 69
6 SwitchBoardClient 0x000000011eb91cd5 boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >::operator()(adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio ::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*) const + 97
7 SwitchBoardClient 0x000000011eb91d19 void boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> >::operator()<boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list0>(boost::_bi::type<void>, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >&, boost::_bi::list0&, int) + 65
8 SwitchBoardClient 0x000000011eb91d56 boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > >::operator()() + 54
9 SwitchBoardClient 0x000000011eb91d74 boost::detail::thread_data<boost::_bi::bind_t<void, boost::_mfi::mf0<void, adobe::switchboard::Connection<boost::asio::basic_stream_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > > >, boost::_bi::list1<boost::_bi::value<adobe::switchboard::Connection<boost::asio::basic_str eam_socket<boost::asio::ip::tcp, boost::asio::stream_socket_service<boost::asio::ip::tcp> > >*> > > >::run() + 28
10 SwitchBoardClient 0x000000011eb632be thread_proxy + 89
11 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
12 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
13 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 13:
0 libsystem_kernel.dylib 0x000000010a98e136 __psynch_cvwait + 10
1 MultiProcessor Support 0x00000001165ac113 boost::condition_variable::wait(boost::unique_lock<boost::mutex>&) + 139
2 MultiProcessor Support 0x00000001165ac1d0 ThreadFunctor::operator()() + 92
3 MultiProcessor Support 0x00000001165c8f70 thread_proxy + 160
4 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
5 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
6 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 14:
0 libsystem_kernel.dylib 0x000000010a9894de mach_msg_trap + 10
1 libsystem_kernel.dylib 0x000000010a98864f mach_msg + 55
2 com.apple.CoreFoundation 0x0000000106e8fb34 __CFRunLoopServiceMachPort + 212
3 com.apple.CoreFoundation 0x0000000106e8effb __CFRunLoopRun + 1371
4 com.apple.CoreFoundation 0x0000000106e8e858 CFRunLoopRunSpecific + 296
5 com.apple.AppKit 0x0000000101fac33b _NSEventThread + 137
6 libsystem_pthread.dylib 0x000000010aaa3268 _pthread_body + 131
7 libsystem_pthread.dylib 0x000000010aaa31e5 _pthread_start + 176
8 libsystem_pthread.dylib 0x000000010aaa141d thread_start + 13
Thread 15:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 16:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 17:
0 libsystem_kernel.dylib 0x000000010a98e94a __workq_kernreturn + 10
1 libsystem_pthread.dylib 0x000000010aaa140d start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000001 rbx: 0x0000000123d20ff0 rcx: 0x0000000023d20000 rdx: 0x0000000000000000
rdi: 0x0000000000000000 rsi: 0x0000000000000067 rbp: 0x00007fff5fbff880 rsp: 0x00007fff5fbff870
 r8: 0x0000000111d0da00 r9: 0x0000000000000600 r10: 0x0000000012e3bdbc r11: 0x0000000000000000
r12: 0x0000000000000000 r13: 0x00000000000000ce r14: 0x0000000000000067 r15: 0x0000608000018700
rip: 0x000000010495a94d rfl: 0x0000000000010202 cr2: 0x000000000000003c

When I try to move files from my mac (v10.8.5) to my external harddrive I get the error message The operation can't be completed because an unexpected error occurred (error code -50).

When I try to move files from my imac (v10.8.5) to my external harddrive I get the error message "The operation can’t be completed because an unexpected error occurred (error code -50)." How can I resolve this? Thank you.

Some other things to look at.
https://www.google.com/search?btnG=1&pws=0&q=The+operation+cannot+be+completed+b ecause+an+unexpected+error+occurred+(error+code+-50

I keep getting the error message "The operation can't be completed because you don't have permission to access some of the items."

When I try and move an application to my application folder from the installer and when I try to empty the trash, I get the error message, "The operation can’t be completed because you don’t have permission to access some of the items." This has only been an issue since I upgraded to Lion. I'm using a July '07 white Macbook 2.16 Intel Core 2 Duo. In my trash I only have an older version of a software that I updated (Divy). The software I'm trying to install is Angry Birds Rio.

Always use the same websites you are having problems with so you can monitor the changes.
Try the reset for Safari:
And for Firefox:
http://www.ehow.com/how_6874158_keyboard-working-certain-websites-firefox.html
Try logging in to the guest account as well to see if you have the same problems there, it might be a logging in issue.

Creating Protection Group Fails with Error:360 The operation failed due to a virtual disk service error

Hello
I'm setting up a DPM server (2012 R2) at a remote site; everything goes well with no issues until a protection group is created, at which point I get the following error;
Create protection group: Protection Group 1 failed:
Error 360: The operation failed due to a virtual disk service error
Error details: The system cannot find the file specified
Recommended action: Retry the operation.
The environment is as follows;
- Virtual Machine Running Server 2008 R2 Fully updated
- Storage Pool is an iSCSI connection Thick Provisioned 1TB GPT and shows in Disk Management with no issues.
- Have connected to Session 0 (console)
- Error log shows The provider did not receive a Plug and Play service notification for the volume. volume=10 for the VDS Dynamic Provider
Can Anyone Help?
Thanks
.Adam Langdon

Hi,
Disk defrag is initiated when a volume shrink is attempted. See if there is any problem defragging a volume and correct any problems doing that.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

Run Disk Utility and try to verify/repair the drive to see if it reports and fixes anything.

HT1222 Update to Safari 6.0.2 gives error message "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)"

Every time I try an update I keep getting the error message
"The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)."
Once I get this error message and try to update again, I get told there are no updates. I have to cancel the first attempted update and close all message windows before it lets me try again, and guess what, same error as above.
Is anyone else having this problem, or know how to fix it.
Not sure at the moment if this is an Apple related problem or a problem with my machine, but everything else worked ok, including an earlier update to iPhoto

Use this link instead:
http://swcdn.apple.com/content/downloads/53/02/041-8081/2jwp4wjrwygtm4lc608qy4h0 n4a9yyq37g/Safari6.0.2Mountain.pkg

Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057))

We are trying to convert a physical windows 2003 R2 32 bit server to a VM using VMM 2008 R2 with all updates installed. Each time when we scan the system on VMM, it gets this message: Error (2901) The operation did not complete successfully because of
a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)). If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

Hi Sir,
>> If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
>> gets this message: Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)
Please refer to following article regarding this error :
http://blogs.technet.com/b/hugofe/archive/2010/07/09/abe.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the las

Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the last 5 hours. LR 6 has a serious bug. Anyone else experiencing this problem. Yesterday I was on tech support, waiting for 3 hours, finally they picked up and informed me there department was closing and someone else would call me on Monday. So, I'm working today and all day Sunday to make up for the down time using LR 6.
I don't know if the bug exists in the program or the "Creative Cloud.
Question: Does anyone know why if I bought Light Room 6 [NOT Light Room CC with the monthly rental], I have to enter my serial number if I want to use it?

Entering the serial number is probably part of the registration process.
Just out of curiosity, what were you doing on LR6 when the folder of images became corrupted?

Infopath has encountered an error. The operation failed. Not enough storage is available to process this command

hello,
Using INFO PATH 2013 on Windows 7 64 bit, user is getting the error "Infopath has encountered an error. The operation failed. Not enough storage is available to process this command"
We added the registy IRPStackSize and set it to max 50. This works on my test machine but not this user.
So when using infopath designer 2013, then blank form and data connection, we select Receieve Data-->Sharepoint Library or list and then enter the url to connect to and the user gets the error "Infopath has encountered an error. The operation failed.
Not enough storage is available to process this command"
We use office 365 of course with Sharepoint.
I am able to run infopath 2013 as an admin and I am able to connect fine, but not with his standard profile.
Any ideas, please let me know.
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value from
our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

side note, i am able to connect on his pc with a standard user account so something with his windows profile that's corrupted, anyone know?
Best regards, Joe C Partner Online Technical Community ----------------------------------------------------------------------------------------- We hope you get value
from our new forums platform! Tell us what you think: <a href="http://social.microsoft.com/Forums/en-US/partnerfdbk/threads">http://social.microsoft.com/Forums/en-US/partnerfdbk/threads 
</a>------------------------------------------------------------------------------------------ This posting is provided "AS IS" with no warranties, and confers no rights <hr>

Workspace customized dashboards: Error in the operation

Similar Messages

Maybe you are looking for