Workspace - planning issue.
HI,
I have issue with logging into workspace and opening a planning application.
I am able to login into workspace without an issue .
Before that . I have configured using IIS ( instead of apache ) on port number 80 and with weblogic 45000.
Now, i am able to open it on both 80 and 45000, and I see the following error in both the cases.
The errors are :
1. Invalid or could not find module configuration.
2. Required application module HyperionPlanning.planning is not configured. Please contact your administrator.
3. Communication Error
I have seen the errors in other posts of the forum. but In my case it does not work both on 80 and 45000.
pls help.
Hi,
If you can't access planning through http://<planning machine>/HyperionPlanning/ then IIS set up must not of been successful.
By default it uses a isapi redirect filter to redirect from IIS to the correct port of say planning.
It is picked up from \Hyperion\common\appServers\Tomcat\5.0.28\isapi\isapi_redirect-1.2.14.dll
If you go into IIS management and select properties for your web server, under the ISAPI filters tab you should see the status of the filter.
It is configured using the property files :- uriworkermap.properties and workers.properties
Cheers
John
http://john-goodwin.blogspot.com/
Similar Messages
-
InDesign CS5 ME - Workspace/Toolbars issue
hi all
i bought new computer with win 7 ultimate 64 bit
and i try to install indesign cs5 middle east (ME) and after i finnish it i get : Window -> Workspace" dropdown there are no available Workspaces to choose from
The Workspace settings are set to "untitled" and, while you can manually set them back to normal, upon reloading InDesign 5, it has reset and you are back to no toolbars.
and i dont get :
For example, Re: InDesign CS5 - Workspace/Toolbars issue.. permissions? Re: InDesign CS5 - Workspace/Toolbars issue.. permissions? Re: InDesign CS5 - Workspace/Toolbars issue.. permissions? .... etc are not there, only the options to "Reset Untitled" and "New Workspace...".
in my old computer and in my leptop i dont have this problem
do you have any solution for me.
thanks
hananOk sure,
When loading up InDesign CS5 (v7.0.2) on either a Dell XPS 720, or a Dell Precision T3400, the toolbars don't appear. The Workspace settings are set to "untitled" and, while you can manually set them back to normal, upon reloading InDesign 5, it has reset and you are back to no toolbars.
After some troubleshooting, under the "Window -> Workspace" dropdown there are no available Workspaces to choose from. For example, .... etc are not there, only the options to "Reset Untitled" and "New Workspace..."
It seems as though the program is having trouble loading the Workspace defaults into CS5 ID...
However, when you run the program as either a local admin or set the compatibility to Windows 2000, it loads up just fine, toolbars/workspaces and all.
Hope this clarifies the situation, again thanks for your help thus far.
Adam -
Hi,
We are usig REM scenario. We require a report which shows the actual issues & planned issues for the components & the variance. Actual issues ca be obtained from table MSEG through movement types. How to get planned issues considering that a component may be used in many BOM's.
Matter very critical.
regards,
Mohit GoyalThanks Srikanth for promp reply.
But i am not looking for PIR data. I need standard issues of the component as per the BOM.
For example a component is used in 5 BOM's. Now corresponding to actual issue of the component , planned/standard issue is required for the component. This way we can further calculate the variance.
Hopefully the requirement is clear.
regards,
Mohit Goyal -
LoadBalancer and BIG IP Setting for Workspace/Planning
Hi,
I recently migrated our Planning applications from System 9.3.1 to System 11.1.2.1 successfully. One of the things we setup in this process was a virtual IP Address to which two server IPs were assigned as well as the 19000 port. This was done to divert reduce the load of logins on one server as well as prepare for a server crash.
The virtual IP address was created successfully and the loadbalancer is able to divert multiple connections to a default algorithm set on the loadbalancer hardware.
However, when i login to the Workspace via my IE. I see that under Navigate->Planning->Application, there is a long string that is displayed instead of "Planning". I was asked to ensure "Persistence" is setup on the loadbalancer and it was confirmed that indeed "cookie persistence" was setup. However, the issue still exists.
I also tried to change a few files residing in the Oracle Folder on the Planning server and the issue still exists. Lastly, i changed the "cookie persistence" to "IP Persistence" with "Source address"persistence as the default setting. The issue still exists.
I have asked Oracle for any documentation that recommends the proper setting and unfortunately there is one and it is for "EPMA" and not for Planning (As i assume the issue is with the "Planning" label.
Anyone else who has come across this issue and what is the best way to resolve this?Hi,
we had also some difficulties with that buttons and now we solved it with a command bar with different buttons and menus coded in vba.
Was a bit tricky but its was the best way to have a lot of functions on a single workbook.
We used the standard analyzer buttons to do maintain the sequences on a hiden sheet and in vba we connected the buttons/menu entries with vba:
For generatig a command bar in vba but in a module:
Set sb = CommandBars.Add("NAME_OF_COMMANDBAR")
With sb
.Visible = True
.Top = 400
.Left = 400
End With
Set TopMenu = CommandBars("NAME_OF_COMMANDBAR")
With TopMenu
.Controls.Add(Type:=msoControlButton, before:=1).Caption = "SAVE" '4
.Controls("Sichern").FaceId = 270
.Controls("Sichern").OnAction = "Tabelle4.BUTTON_11_Click"
End With
Best Regards,
Thomas -
Registration with Shared Services failed for EAS, APS, Workspace & Planning
Hi All,
I have installed 11.1.1.3 hyperion suite with OAS as web application server.
The architecture is
Server 1: Shared Services
Server 2: Workspace
Server 3: Planning
Server 4: EAS & APS
Server 5: FR & Web Analysis.
Registration of Planning, EAS, APS & Workspace with shared services failed. Configtool_err.log says:
(May 23, 2011, 05:36:52 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(May 23, 2011, 05:36:52 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
Error Code: -1
com.hyperion.css.common.configuration.CSSConfigurationException: 20:3008:Failed to connect to native directory. Error Code: 9
at com.hyperion.css.spi.CSSManager.getProviderInstance(Unknown Source)
at com.hyperion.css.spi.CSSManager.initProviders(Unknown Source)
at com.hyperion.css.spi.CSSManager.initialize(Unknown Source)
at com.hyperion.css.spi.CSSManager.<init>(Unknown Source)
at com.hyperion.css.spi.CSSManager.getInstance(Unknown Source)
at com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
at com.hyperion.css.CSSSystem.getInstance(Unknown Source)
at com.hyperion.cis.config.CmsRegistrationUtil.getStandAloneCSS(CmsRegistrationUtil.java:440)
at com.hyperion.cis.config.CmsRegistrationUtil.<init>(CmsRegistrationUtil.java:82)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:422)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(May 23, 2011, 05:36:53 PM), com.hyperion.planning.HspDBConfigurator, ERROR, Error happened: null
(May 23, 2011, 05:36:53 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
at com.hyperion.planning.HspDBConfigurator.configure(HspDBConfigurator.java:209)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDbConfigTask(RunAllTasksWizardAction.java:658)
at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:202)
at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
I tried to telnet port 7777 & 28089 of server 1 from each server. The connection failed. I have asked the network team to open the required hyperion ports
Can anybody help me on this.
TIAJust out of interest why have you used OAS as it is pretty much dead product now and is not used in future releases.
Anyway I am not sure why you have closed ports between those servers, you will end up spending a lot of time trying to open all the required ports between the servers.
Can you not get all the ports open for a time just to check it definitely is a ports issue.
It is probably also worth checking the following spreadsheet out - http://www.oracle.com/technetwork/middleware/bi-foundation/epm-components-communications-fd-11-128629.xls
It highlights the ports used in communication.
Cheers
John
http://john-goodwin.blogspot.com/ -
Hi All,
Need your help.
One User cannot login to workspace.Once he has entered the username and password the page is stuck at loading.
History:
There are 6 sites for the client. 4 sites are fully functioning and have no problem.
Management had decided that the remaining 2 sites need to have access to Hyperion Applications.We have suggested the IT support team to give the same access to the ports as of the 4 sites to access Hyperion applications .
Only two Users-one from each site. Provisioned the Users to the group and cost centers as mentioned by the client.
1.One user from one site has no problem-can access all applications.
2.Problem with the other site :*User can login to Hyperion planning applicaiton but cannot login to Workspace--no error msg displayed-stuck at loading the page.*
Can you please help me in this regard.
Many Thanks.
Regards
TSIt sounds like a issue with FireFox and Workspace.
LiveCycle Workspace 9.0 - End User Issues
** New for LiveCycle ES2 SP1 ** Problem logging into Workspace 9.0 using Firefox 3.6.x in Windows
When you log into Workspace 9.0 using the Firefox 3.6.x web browser in Windows, you are unable to enter text in the User ID or Password fields. The current workaround is to select another window (or empty area on the desktop), reselect the web browser to reset the focus, and then enter text in the User ID or Password fields.
You can see it in the release notes at http://help.adobe.com/en_US/livecycle/9.0/releasenotes.html#EndUserIssues.
Hope that helps!
...Gil -
I installed IR services and workspace connected with oracle database.
EPM system version is 11.1.1.3
When I created a new user provisioned with IR administrator role, I could only login once.
If I log off and relogin, workspace prompt that "adf.jsp" error "CDS.mode not found".
Anyone who can help me? Thanks.
I found that when I logined with a new user, a user perference file has been created in security, when relogin next time following error prompted.
Error Loading Adf 'http://hyperion:19000/workspace/browse/dyn?page=/modules/com/hyperion/tools/cds/repository/bpm/mode/Adf.jsp&instance=16&serverName=Workspace&bpmDesignerInstallerRelativeUri=%2Fwebstart%2Fstartup.jsp&jawsScriptInstallerRelativeUri=%2FAccessibilityIRScripts%2FAccessibilityIRScriptsSetup.exe&resizeContentInterval=2000' for module with id : cds.mode
There was some communication error. Response is : http://hyperion:19000/workspace/browse/dyn <?xml version="1.0" encoding="UTF-8"?>
<Application>
<BpmModule id="cds.mode">
<BpmContent/>
</BpmModule>
<Resources>
<Script><![CDATA[
BpmImport("com.hyperion.tools.cds.HSRoleVars");
var rRoleVars = com.hyperion.tools.cds.HSRoleVars;
rRoleVars.addRole(0, false);
rRoleVars.addRole(1, false);
rRoleVars.addRole(2, false);
rRoleVars.addRole(3, false);
rRoleVars.addRole(4, true);
rRoleVars.addRole(5, true);
rRoleVars.addRole(6, false);
rRoleVars.addRole(7, false);
rRoleVars.addRole(8, false);
rRoleVars.addRole(9, false);
rRoleVars.addRole(10, false);
rRoleVars.addRole(11, true);
rRoleVars.addRole(12, true);
rRoleVars.addRole(13, true);
rRoleVars.addRole(14, true);
rRoleVars.addRole(15, false);
rRoleVars.addRole(16, false);
rRoleVars.addRole(17, false);
rRoleVars.addRole(18, false);
rRoleVars.addRole(19, false);
rRoleVars.addRole(20, false);
rRoleVars.addRole(21, true);
rRoleVars.addRole(22, true);
rRoleVars.addRole(23, true);
rRoleVars.addRole(24, true);
rRoleVars.addRole(25, true);
rRoleVars.addRole(26, false);
rRoleVars.addRole(27, false);
rRoleVars.addRole(28, false);
rRoleVars.addRole(29, true);
rRoleVars.addRole(30, true);
rRoleVars.addRole(31, true);
rRoleVars.addRole(32, false);
rRoleVars.addRole(33, true);
rRoleVars.addRole(34, true);
rRoleVars.addRole(35, false);
rRoleVars.addRole(36, false);
rRoleVars.addRole(37, false);
BpmImport("com.hyperion.tools.cds.util.HSConstants");
BpmImport("com.hyperion.tools.cds.bindows.HSBaseContainerHandler");
* Handler associated with the open Application module
com.hyperion.tools.cds.repository.bpm.mode.Handler = function()
if (_biInPrototype)
return;
com.hyperion.tools.cds.bindows.HSBaseContainerHandler.call(this);
BpmImport("com.hyperion.tools.cds.util.HSCallback");
BpmImport("com.hyperion.tools.cds.data.HSNetwork");
BpmImport("com.hyperion.tools.cds.data.HSNode");
BpmImport("com.hyperion.tools.cds.data.HSNodeType");
BpmImport("com.hyperion.tools.cds.CDSCommand");
BpmImport("com.hyperion.tools.cds.repository.HSFileDialog");
BpmExtend(com.hyperion.tools.cds.repository.bpm.mode.Handler, com.hyperion.tools.cds.bindows.HSBaseContainerHandler, "com.hyperion.tools.cds.repository.bpm.mode.Handler");
c.ENUMERATEDAPPS_LIST = new Array();
c.ENUMERATEDAPPS_MENUDATA = new Array();
c.NAVIGATEID_MAPPINGS = {'exploreanotation':'bpm.mnit_ToolsViewerAnotationExplorer','answers':'bpm.mnit_ToolsViewerAnswers','dashboards':'bpm.mnit_ToolsViewerDashboards','delivers':'bpm.mnit_ToolsViewerDelivers','publisher':'bpm.mnit_ToolsViewerPublisher','scorecards':'bpm.mnit_ToolsViewerScorecards','metrics':'bpm.mnit_ToolsViewerMetrics','adminGeneral':'bpm.mnit_ToolsAdministerGeneral','adminAuthProperties':'bpm.mnit_ToolsAdministerAuthProperties','adminUserManagement':'bpm.mnit_ToolsAdministerUserManagement','adminPhysicalResources':'bpm.mnit_ToolsAdministerPhysicalResources','adminMimeTypes':'bpm.mnit_ToolsAdministerMimeTypes','adminNotifications':'bpm.mnit_ToolsAdministerNotifications','adminSmartcuts':'bpm.mnit_ToolsAdministerSmartcuts','adminRowLevelSecurity':'bpm.mnit_ToolsAdministerRowLevelSecurity','adminUsageTracking':'bpm.mnit_ToolsAdministerUsageTracking','adminEventTracking':'bpm.mnit_ToolsAdministerEventTracking','adminDimLibrary':'bpm.mnit_ToolsAdministerDimLibrary','adminAppLibrary':'bpm.mnit_ToolsAdministerAppLibrary','adminDataSync':'bpm.mnit_ToolsAdministerDataSync','adminAppUpgrade':'bpm.mnit_ToolsAdministerAppUpgrade','batchScheduler':'bpm.mnit_ToolsScheduleBatchScheduler','viewjob':'bpm.mnit_ToolsScheduleViewJobStatus','viewjob':'bpm.mnit_ToolsScheduleViewJobStatus','manageevents':'bpm.mnit_ToolsScheduleManageEvents','showparameters':'bpm.mnit_ToolsScheduleShowParameters','jobnotifications':'bpm.mnit_ToolsScheduleJobNotifications','jobqueue':'bpm.mnit_ToolsScheduleJobQueue','consolidate':'bpm.mnit_ToolsScheduleConsolidatedJobStatusList','schedJobConsole':'bpm.mnit_ToolsScheduleJobConsole','syncMetadata':'bpm.mnit_ToolsChangeManagementSynchronizeMetadata','datamodelUpdates':'bpm.mnit_ToolsChangeManagementDataModelUpdates','javascriptUpdates':'bpm.mnit_ToolsChangeManagementJavascriptUpdates','genericUpdates':'bpm.mnit_ToolsChangeManagementGenericUpdates','showTaskList':'bpm.mnit_ToolsChangeManagementShowTaskList','taskStatus':'bpm.mnit_ToolsChangeManagementShowTaskStatus','ioc':'bpm.mnit_ToolsChangeManagementShowImpactOfChange','adminConsolidationSystemMessages':'bpm.mnit_AdminConsolidationSystemMessages','adminConsolidationUsersOnSystem':'bpm.mnit_AdminConsolidationUsersOnSystem','adminConsolidationManageServersAndApp':'bpm.mnit_AdminConsolidationManageServersAndApp','adminClassicAppsConsolidation':'bpm.mnit_AdminClassicAppsConsolidation','adminClassicAppsPlanning':'bpm.mnit_AdminClassicAppsPlanning','adminChangeOwner':'bpm.mnit_ToolsAdministerChangeOwner'} ;
* Initialize default values for member variables.
p.initializeDefaults = function()
com.hyperion.tools.cds.bindows.HSBaseContainerHandler.prototype._initializeDefaults.call(this);
if (0)
this._rstTabAlignment = bpm.common.StartupContainerHandler.TAB_ALIGNMENT_TOP;
else
this._rstTabAlignment = bpm.common.StartupContainerHandler.TAB_ALIGNMENT_BOTTOM;
this._iResizeContentInterval =
2000;
var rstContextPath = gContextManager.getContext(this.getModule().getContext()).getPath();
// Remove last backslash.
this._rstContextPath = rstContextPath.substring(0, rstContextPath.length - 1);
this._rCdsStringBundle = BpmStringBundle.getStringBundle("cds");
this.newDocCount = 0;
if (false)
this.getModule().getConfig()['bpm.logoff'] = 'false';
bpm.common.Utils.setUser("test");
com.hyperion.tools.cds.rNetwork = new com.hyperion.tools.cds.data.HSNetwork();
com.hyperion.tools.cds.rNetwork.addServer(
"Workspace",
gModuleManager.getStartupContextPath(),
null,
new com.hyperion.tools.cds.util.HSCallback(
function(rThrowable)
bpm.common.MessageDialog.showDetailsDialog(
rThrowable.getMessageChain(),
rThrowable.getDetailChain(),
null,
BiOptionPane.getImageFromOptionType("error"));
null,
null),
new com.hyperion.tools.cds.util.HSCallback(
function(rstMessage, rLogger)
if (rLogger.isDebug())
rLogger.debug(rstMessage);
null,
bpm.common.Logger.getLogger("com.hyperion.tools.cds.data")));
this._rstSelectedTheme = "BpmTadpole";
* Initialize default values for member variables.
p.initializeActions = function()
com.hyperion.tools.cds.bindows.HSBaseContainerHandler.prototype._initializeActions.call(this);
var rModule = this.getModule();
var rContent = rModule.getContent();
var actionBar = rModule.getActionBarDef();
actionBar.setId("cds.mode.actionBar");
var cmds = this.getModule().getCommands();
var cmdNewDoc = new BpmCommand();
cmdNewDoc.setId("cds.mode.cmdNewDoc");
cmdNewDoc.setEnabled(true);
cmdNewDoc.setParentModule(this.getModule());
cmds.add(cmdNewDoc);
var cmdNewPP = new BpmCommand();
cmdNewPP.setId("cds.mode.cmdNewPP");
cmdNewPP.setEnabled(true);
cmdNewPP.setParentModule(this.getModule());
cmds.add(cmdNewPP);
var cmdNewWP = new BpmCommand();
cmdNewWP.setId("cds.mode.cmdNewWP");
cmdNewWP.setEnabled(true);
cmdNewWP.setParentModule(this.getModule());
cmds.add(cmdNewWP);
var cmdOpenDoc = new BpmCommand();
cmdOpenDoc.setId("cds.mode.cmdOpenDoc");
cmdOpenDoc.setEnabled(true);
cmdOpenDoc.setParentModule(this.getModule());
cmds.add(cmdOpenDoc);
var cmdSubscriptions = new BpmCommand();
cmdSubscriptions.setId("cds.mode.cmdSubscriptions");
cmdSubscriptions.setEnabled(true);
cmdSubscriptions.setParentModule(this.getModule());
cmds.add(cmdSubscriptions);
var cmdManagePersonalPages = new BpmCommand();
cmdManagePersonalPages.setId("cds.mode.cmdManagePersonalPages");
cmdManagePersonalPages.setEnabled(true);
cmdManagePersonalPages.setParentModule(this.getModule());
cmds.add(cmdManagePersonalPages);
var toolBar = new BpmToolBar();
toolBar.setId("cds.mode.tlb");
this.getModule().setToolBarDef(toolBar);
var rToolBarButtonHome = new BiToolBarButton();
rToolBarButtonHome.setId("cds.mode.tlbt_Home");
rToolBarButtonHome.setToolTipText("Home");
rToolBarButtonHome.setEnabled(true);
rToolBarButtonHome.setIcon(new BiImage(this._rstContextPath + "/images/com/hyperion/tools/cds/repository/bpm/TB_Home.gif"));
toolBar.add(rToolBarButtonHome);
var newDocButton = new BiToolBarButton();
newDocButton.setId("cds.mode.tlbt_NewDoc");
newDocButton.setToolTipText("New Document");
newDocButton.setEnabled(true);
newDocButton.setIcon(new BiImage(this._rstContextPath + "/images/com/hyperion/tools/cds/repository/bpm/TB_New.gif"));
newDocButton.setCommand(cmdNewDoc);
toolBar.add(newDocButton);
var openButton = new BiToolBarButton();
openButton.setId("cds.mode.tlbt_Open");
openButton.setToolTipText("Open Document");
openButton.setEnabled(true);
openButton.setIcon(new BiImage(this._rstContextPath + "/images/com/hyperion/tools/cds/repository/bpm/TB_Open.gif"));
openButton.setCommand(cmdOpenDoc);
toolBar.add(openButton);
var explorerModeButton = new BiToolBarButton();
explorerModeButton.setId("cds.mode.tlbt_ExploreMode");
explorerModeButton.setEnabled(true);
explorerModeButton.setText("Explore");
explorerModeButton.setToolTipText("Explore");
explorerModeButton.setIcon(new BiImage(this._rstContextPath + "/images/com/hyperion/tools/cds/repository/bpm/TB_Explore.gif"));
toolBar.add(explorerModeButton);
var rstPath = gModuleManager.getStartupContextPath();var rItem = null;var rNavMenu = application.getComponentById(bpm.common.Constants.MENU_ID_NAV);var rMenuButton = null;var rMenu0=rNavMenu;rItem = new BpmMenuItem();rItem.setId('bpm.mnit_NavWorkspacePages');rItem.setText('Workspace Pages\nw');rMenu0.add(rItem);var rMenu1 = new BpmMenu();rMenu1.setId('bpm.mnu_NavWorkspacePages');rItem.setSubMenu(rMenu1);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_NavWorkspacePagesPersonal');rItem.setText('My Workspace Pages\nm');rMenu1.add(rItem);var rMenu2 = new BpmMenu();rMenu2.setId('bpm.mnu_NavWorkspacePagesPersonal');rItem.setSubMenu(rMenu2);var rNavWorkspacePagesPersonalSubMenu=rMenu2;rMenu2.addEventListener(bpm.common.Constants.EVENT_BEFORESHOW,this._buildWorkspacePagesSubMenu,this);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_NavWorkspacePagesCorporate');rItem.setText('Shared Workspace Pages\ns');rMenu1.add(rItem);var rMenu2 = new BpmMenu();rMenu2.setId('bpm.mnu_NavWorkspacePagesCorporate');rItem.setSubMenu(rMenu2);var rNavWorkspacePagesCorporateSubMenu=rMenu2;rMenu2.addEventListener(bpm.common.Constants.EVENT_BEFORESHOW,this._buildWorkspacePagesSubMenu,this);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsViewerExplorer');rItem.setText('Explore\ne');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ExploreMode.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu0.add(rItem);rItem = new BpmMenuSeparator();rItem.setId('bpm.mnit_Nav_Separator2');rMenu0.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdminister');rItem.setText('Administer\na');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerMode.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu0.add(rItem);var rMenu1 = new BpmMenu();rMenu1.setId('bpm.mnu_ToolsAdminister');rItem.setSubMenu(rMenu1);var administerSubMenu=rMenu1;rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerGeneral');rItem.setText('General\ng');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModeGeneral.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerAuthProperties');rItem.setText('Authentication\na');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModeAuthentication.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerUserManagement');rItem.setText('Shared Services Console\ns');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModeUserManagement.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);var rUserManagementMenu=rItem;rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerLaunchCMC');rItem.setText('Configuration Console\nf');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModeLaunchCMC.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsViewerAnotationExplorer');rItem.setText('Annotations\ni');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ExploreMode.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerPhysicalResources');rItem.setText('Physical Resources\nh');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModePhysicalResources.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerMimeTypes');rItem.setText('Mime Types\ny');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModeMimeTypes.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerNotifications');rItem.setText('Notifications\nn');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModeNotifications.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerRowLevelSecurity');rItem.setText('Row Level Security\nr');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModeRowLevelSecurity.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerUsageTracking');rItem.setText('Usage Tracking\nu');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModeUsageTracking.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerEventTracking');rItem.setText('Event Tracking\ne');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModeEventTracking.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerChangeOwner');rItem.setText('Change Ownership\nw');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_AdministerModeChangeOwner.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuSeparator();rItem.setId('bpm.mnit_CalcMgrSeparator');rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdministerCalculationManager');rItem.setText(BpmStringBundle.getString('calcmgr-global','MItem_CalculationManager'));rItem.setIcon(new BiImage(rstPath + '/../calcmgr/themes/common/images/CT_AdminCalcManager.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rItem.setBefore('bpm.mnit_ToolsAdministerAppUpgrade');rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsSchedule');rItem.setText('Schedule\ns');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ScheduleMode.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu0.add(rItem);var rMenu1 = new BpmMenu();rMenu1.setId('bpm.mnu_ToolsSchedule');rItem.setSubMenu(rMenu1);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsScheduleJobQueue');rItem.setText('Job Queue\nq');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ScheduleModeJobsQueue.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsScheduleJobNotifications');rItem.setText('Job Notifications\no');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ScheduleModeJobNotifications.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsScheduleShowParameters');rItem.setText('Show Parameters\ns');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ScheduleModeShowParameters.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsScheduleViewJobStatus');rItem.setText('Jobs Running\nj');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ScheduleModeJobsRunning.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsScheduleManageEvents');rItem.setText('Manage Events\na');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ScheduleModeManageEvents.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsScheduleConsolidatedJobStatusList');rItem.setText('Consolidated Job Status\nc');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ScheduleModeConsolidatedJobStatusList.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuSeparator();rItem.setId('bpm.mnit_Nav_Separator3');rMenu0.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_IManager');rItem.setText('Impact Manager\ni');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ChangeManagementMode.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rItem.setBefore('bpm.mnit_Nav_Separator3');rMenu0.add(rItem);var rMenu1 = new BpmMenu();rMenu1.setId('bpm.mnu_IManager');rItem.setSubMenu(rMenu1);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsChangeManagementSynchronizeMetadata');rItem.setText('Synchronize Metadata\ns');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ChangeManagementModeSynchronizeMetadata.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsChangeManagementDataModelUpdates');rItem.setText('Update Data Models\nd');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ChangeManagementModeDataModelUpdate.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsChangeManagementJavascriptUpdates');rItem.setText('JavaScript Update\nj');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ChangeManagementModeJavascriptUpdates.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsChangeManagementGenericUpdates');rItem.setText('Custom Update\nc');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ChangeManagementModeGenericUpdates.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsChangeManagementShowTaskStatus');rItem.setText('Show Task Status\nt');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ChangeManagementModeJobStatus.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsChangeManagementShowTaskList');rItem.setText('Manage Task List\nm');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ChangeManagementModeShowTaskList.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsChangeManagementShowImpactOfChange');rItem.setText('Show Impact of Change\ni');rItem.setIcon(new BiImage(rstPath + '/images/com/hyperion/tools/cds/repository/bpm/CT_ChangeManagementModeImpactOfChange.gif',com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_WIDTH,com.hyperion.tools.cds.repository.bpm.mode.Handler.MENU_IMAGE_HEIGHT));rMenu1.add(rItem);rMenuButton = new BpmMenuButton();rMenuButton.setId('bpm.mnbt_File');actionBar.add(rMenuButton);var rMenu0 = new BpmMenu();rMenu0.setId('bpm.mnu_File');rMenuButton.setSubMenu(rMenu0);rMenu0.addEventListener(bpm.common.Constants.EVENT_BEFORESHOW,this.displayFileNewMenu,this);rMenu0.setBefore('bpm.mnit_FileClose');rItem = new BpmMenuItem();rItem.setId('bpm.mnit_FileNew');rItem.setText('New\nn');rMenu0.add(rItem);var rMenu1 = new BpmMenu();rMenu1.setId('bpm.mnu_New');rItem.setSubMenu(rMenu1);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_FileNewDocument');rItem.setText('Document...\nd\nCtrl+N');rItem.setCommand(cmdNewDoc);rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_FileNewPP');rItem.setText('Personal Page...\np\nCtrl+Shift+P');rItem.setCommand(cmdNewPP);rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_WorkspacePage');rItem.setText('Workspace Page...\nw\nCtrl+Shift+W');rItem.setCommand(cmdNewWP);rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_FileOpen');rItem.setText('Open\no');rMenu0.add(rItem);var rMenu1 = new BpmMenu();rMenu1.setId('bpm.mnu_Open');rItem.setSubMenu(rMenu1);rMenu1.addEventListener(bpm.common.Constants.EVENT_BEFORESHOW,this.onActionFavoritesOpen,this);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_FileOpenDocument');rItem.setText('Document...\nd\nCtrl+O');rItem.setCommand(cmdOpenDoc);rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsWorkspacePages');rItem.setText('Workspace Pages\nw');rMenu1.add(rItem);var rOpenWorkspacePagesMenuItem=rItem;var rMenu2 = new BpmMenu();rMenu2.setId('bpm.mnu_ToolsWorkspacePages');rItem.setSubMenu(rMenu2);var rOpenWorkspacePagesSubMenu=rMenu2;rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsWorkspacePagesPersonal');rItem.setText('My Workspace Pages\nm');rMenu2.add(rItem);var rOpenWorkspacePagesPersonalMenuItem=rItem;var rMenu3 = new BpmMenu();rMenu3.setId('bpm.mnu_ToolsWorkspacePagesPersonal');rItem.setSubMenu(rMenu3);var rOpenWorkspacePagesPersonalSubMenu=rMenu3;rMenu3.addEventListener(bpm.common.Constants.EVENT_BEFORESHOW,this._buildWorkspacePagesSubMenu,this);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsWorkspacePagesCorporate');rItem.setText('Shared Workspace Pages\ns');rMenu2.add(rItem);var rMenu3 = new BpmMenu();rMenu3.setId('bpm.mnu_ToolsWorkspacePagesCorporate');rItem.setSubMenu(rMenu3);var rOpenWorkspacePagesCorporateSubMenu=rMenu3;rMenu3.addEventListener(bpm.common.Constants.EVENT_BEFORESHOW,this._buildWorkspacePagesSubMenu,this);rItem = new BpmMenuSeparator();rItem.setId('bpm.mnit_FileURLLauncherSeparator');rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_File_URLLauncher');rItem.setText('URL...\nu');rMenu1.add(rItem);rMenuButton = new BpmMenuButton();rMenuButton.setId('bpm.mnbt_Favorites');rMenuButton.setText('Favorites\nr');rMenuButton.setBefore('bpm.mnbt_Help');actionBar.add(rMenuButton);var rMenu0 = new BpmMenu();rMenu0.setId('bpm.mnu_Favorites');rMenuButton.setSubMenu(rMenu0);rMenu0.addEventListener(bpm.common.Constants.EVENT_BEFORESHOW,this.onActionFavorites,this);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_FavoriteAdd');rItem.setText('Add to Favorites\na');rMenu0.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_FavoritesManager');rItem.setText('Manage Favorites...\nf');rMenu0.add(rItem);rItem = new BpmMenuSeparator();rItem.setId('bpm.sep_FavoritesManager');rMenu0.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsPersonalizeSubscriptions');rItem.setText('Show Subscribed Items\ns');rItem.setCommand(cmdSubscriptions);rMenu0.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsPersonalizeManagePages');rItem.setText('Manage Personal Pages\nm');rItem.setCommand(cmdManagePersonalPages);rMenu0.add(rItem);rItem = new BpmMenuSeparator();rItem.setId('bpm.sep_FavoritesManager2');rMenu0.add(rItem);rMenuButton = new BpmMenuButton();rMenuButton.setId('bpm.mnbt_Tools');rMenuButton.setText('Tools\nt');rMenuButton.setBefore('bpm.mnbt_Help');actionBar.add(rMenuButton);var rMenu0 = new BpmMenu();rMenu0.setId('bpm.mnu_Tools');rMenuButton.setSubMenu(rMenu0);rItem = new BpmMenuItem();rItem.setId('bpm.mnit_ToolsAdvancedSearch');rItem.setText('Advanced Search...\na');rMenu0.add(rItem);rItem = new BpmMenuSeparator();rItem.setId('bpm.mnit_ToolsLinksSeparator');rMenu0.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnu_ToolsInstall');rItem.setText('Install\ni');rMenu0.add(rItem);var rMenu1 = new BpmMenu();rMenu1.setId('bpm.mnu_ToolsInstall');rItem.setSubMenu(rMenu1);rItem = new BpmMenuItem();rItem.setId('bpm.mnu_ToolsInstallQueryAndReportingClient');rItem.setText('Interactive Reporting Web Client\ni');rMenu1.add(rItem);rItem = new BpmMenuItem();rItem.setId('bpm.mnu_ToolsInstallSmartView');rItem.setText('Smart View\ns');rMenu1.add(rItem);this._rNavAppMenuItemHashtable = new Object();this._rNavAppMenuHashtable = new Object();rNavWorkspacePagesPersonalSubMenu.setUserData(new Array(rNavWorkspacePagesPersonalSubMenu, this._loadWorkspacePagesPersonalList));rNavWorkspacePagesCorporateSubMenu.setUserData(new Array(rNavWorkspacePagesCorporateSubMenu, this._loadWorkspacePagesCorporateList));application.getAdf().getXmlResourceParser()._addObject(administerSubMenu, bpm.common.Constants.MENU_ID_TOOLS_ADMINISTER);application.getAdf().getXmlResourceParser()._addObject(rUserManagementMenu, bpm.common.Constants.MENUITEM_ID_NAV_ADMINISTER_USER_MANAGEMENT);rUserManagementMenu.setEnabled(com.hyperion.tools.cds.HSRoleVars.hasRole(com.hyperion.tools.cds.HSRoleVars.ROLE_CAN_PROVISION_USERS));rNavMenu.add(this.createOpenItemsMenuItem());this.createOpenIIt sounds like a issue with FireFox and Workspace.
LiveCycle Workspace 9.0 - End User Issues
** New for LiveCycle ES2 SP1 ** Problem logging into Workspace 9.0 using Firefox 3.6.x in Windows
When you log into Workspace 9.0 using the Firefox 3.6.x web browser in Windows, you are unable to enter text in the User ID or Password fields. The current workaround is to select another window (or empty area on the desktop), reselect the web browser to reset the focus, and then enter text in the User ID or Password fields.
You can see it in the release notes at http://help.adobe.com/en_US/livecycle/9.0/releasenotes.html#EndUserIssues.
Hope that helps!
...Gil -
Hello
I was trying to login to my BPM Console: http://localhost:8001/bpm/workspace/faces/loginPage.jspx
After logging in the page looks blank, does not show up any info in the page.
Following is the log that has got reflected @ Weblogic level:
Any issue with WIN7 OS on this.
log:
<24 Jan, 2013 2:20:35 PM IST> <Warning> <netuix> <BEA-423420> <Redirect is execu
ted in begin or refresh action. Redirect url is /console/console.portal?_nfpb=tr
ue&_pageLabel=AppApplicationOverviewPage&AppApplicationOverviewPortlethandle=com
.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DOracleBPMWorkspac
e%2CType%3DAppDeployment%22%29.>
<24 Jan, 2013 2:21:54 PM IST> <Warning> <netuix> <BEA-423420> <Redirect is execu
ted in begin or refresh action. Redirect url is /console/console.portal?_nfpb=tr
ue&_pageLabel=AppControlPages.>
Please help me out
Regards
Raj
When Searched in Oracle Support Here is the information that they specified. But This is also not working.
Service error.
Internal Error; Service error occurs in IdentityService in method lookupUser.
Refer to the log file that is configured for oracle.soa.services.identity for more details on this error and contact Oracle Support Services
at oracle.bpel.services.identity.client.AbstractIdentityServiceClient.lookupUser(AbstractIdentityServiceClient.java:195)Cannot log in to workspace( BPM 11g).
Fix
One of the reasons this issue might happen is when the application (in this case the Workspace) was not able to connect to the Identity services.
And the cause of bug was network configuration issues which prevented connection to IdentityService SOAP endpoint using the configured server hostname.
So to overcome this issue, set the ServerURL property in the soa-infra config mBean to http://127.0.0.1
This should resolve the issue.
An alternative option is to use any other valid server IP address / port.
In future the bug fix will have log messages which will post warnings in the logs if the host name used in the URL is not resolved.
How to set the MBean:
1. Login to the em console
2. Right click on soa-infra
3. Goto Administration ->SystemMBean Browser
4. Goto Application Defined MBeans
5. Find Oracle.as.soainfra.config ->Expand "Server: <your server name>"
6. Goto SoaInfraConfig -> click on soa-infra
7. Find the Property ServerURL, enter value as http://127.0.0.1
8. Click on Apply
References
BUG:9815699 - BPM 11G:NOT ABLE TO LOGIN TO WORKSPACE
Edited by: rajMS on Jan 24, 2013 4:18 PMThis is related to the authentication providers you have configured in WebLogic. Check that the providers are configured property for whatever identity store you need to use - integrated WebLogic, OID, AD, etc. - and that they are in the correct order.
-
XMonad - workspace order issue
Hi,
I'm trying to fix a minor issue/annoyance with my XMonad configuration but could use some help.
I have 3 monitors connected to the one card. Two DVI connectors and one HDMI. Xorg pretty much worked out-the-box, except the screens were logically in the wrong order in relation the their positioning. When moving the mouse, the order would be as shown below:
[2] [1*] [3]
* = denotes the middle monitor should be the primary display (HDMI).
I fixed that with the below command first. Then later with /etc/X11/xorg.conf.
xrandr --output HDMI-0 --auto --primary --output DVI-D-0 --right-of HDMI-0 --output DVI-I-1 --left-of HDMI-0
That was fine but the XMonad {w,e,r} key bindings were also in the wrong order. I fixed that with the following in my ~/.xmonad/xmonad.hs configuration.
[((m .|. mod4Mask, key), screenWorkspace sc >>= flip whenJust (windows . f))
| (key, sc) <- zip [xK_w, xK_e, xK_r] [1,0,2] -- was [0..]
, (f, m) <- [(W.view, 0), (W.shift, shiftMask)]
Now the only issue is that when XMonad starts, it defaults to use the middle monitor (which is correct) but xmobar reports the below.
[1:web1] (2:web2) (3:games)
Where the middle monitor is mapped to the [1:web1] workspace.
What I'm trying to achieve is so that it defaults to:
(1:web1) [2:web2] (3:games)
Where the middle monitor is mapped to the [2:web2] workspace.
I know all this stuff is very fluid in XMonad and so not really an issue......it's just seems a more logical way to start the session.
Surely this is possible isn't it?!You probably mean restart instead of recompile and yes the startupHook runs during every startup (see name and documentation of XConfig). I can't think of an easy way to get around that, but it'll probably be a little less annoying if you always switch to your main screen during startup (to make it independent of the screen you're on at the time you issue the restart command).
You currently specify the order twice: once for xrandr and once for the keybindings. I found http://xmonad.org/xmonad-docs/xmonad-co … reens.html, which you can use to make the keybindings follow the order specified with xrandr. Then if you reorder the monitors, you only have to adjust the xrandr command. And it gives you viewScreen to use in the startupHook instead of the stuff from CycleWS. Then you get
import XMonad.Actions.PhysicalScreens
myStartupHook = setWMName "LG3D" >> viewScreen 1
(+ the keybindings from the example in the documentation). This also shows that you can combine actions with >> (do-notation could also be used instead).
Last edited by Raynman (2014-04-08 20:59:25) -
Hi All,
Oracle v11.2.0.2
I have a SELECT query which executes in less than a second and selects few records.
Now, if I put this SELECT query in IN clause of a DELETE command, that takes ages (even when DELETE is done using its primary key).
See below query and execution plan.
Here is the SELECT query
SQL> SELECT ITEM_ID
2 FROM APP_OWNER.TABLE1
3 WHERE COLUMN1 = 'SomeValue1234'
4 OR (COLUMN1 LIKE 'SomeValue1234%'
5 AND REGEXP_LIKE (
6 COLUMN1,
7 '^SomeValue1234[A-Z]{3}[0-9]{5}$'
8 ));
ITEM_ID
74206192
1 row selected.
Elapsed: 00:00:40.87
Execution Plan
Plan hash value: 3153606419
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 2 | 38 | 7 (0)| 00:00:01 |
| 1 | CONCATENATION | | | | | |
|* 2 | INDEX RANGE SCAN | PK_TABLE1 | 1 | 19 | 4 (0)| 00:00:01 |
|* 3 | INDEX UNIQUE SCAN| PK_TABLE1 | 1 | 19 | 3 (0)| 00:00:01 |
Predicate Information (identified by operation id):
2 - access("COLUMN1" LIKE 'SomeValue1234%')
filter("COLUMN1" LIKE 'SomeValue1234%' AND REGEXP_LIKE
("COLUMN1",'^SomeValue1234[A-Z]{3}[0-9]{5}$'))
3 - access("COLUMN1"='SomeValue1234')
filter(LNNVL("COLUMN1" LIKE 'SomeValue1234%') OR LNNVL(
REGEXP_LIKE ("COLUMN1",'^SomeValue1234[A-Z]{3}[0-9]{5}$')))
Statistics
0 recursive calls
0 db block gets
8 consistent gets
0 physical reads
0 redo size
348 bytes sent via SQL*Net to client
360 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processedNow see the DELETE command. ITEM_ID is the primary key for TABLE2
SQL> delete from TABLE2 where ITEM_ID in (
2 SELECT ITEM_ID
3 FROM APP_OWNER.TABLE1
4 WHERE COLUMN1 = 'SomeValue1234'
5 OR (COLUMN1 LIKE 'SomeValue1234%'
6 AND REGEXP_LIKE (
7 COLUMN1,
8 '^SomeValue1234[A-Z]{3}[0-9]{5}$'
9 ))
10 );
1 row deleted.
Elapsed: 00:02:12.98
Execution Plan
Plan hash value: 173781921
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | DELETE STATEMENT | | 4 | 228 | 63490 (2)| 00:12:42 |
| 1 | DELETE | TABLE2 | | | | |
| 2 | NESTED LOOPS | | 4 | 228 | 63490 (2)| 00:12:42 |
| 3 | SORT UNIQUE | | 1 | 19 | 63487 (2)| 00:12:42 |
|* 4 | INDEX FAST FULL SCAN| I_TABLE1_3 | 1 | 19 | 63487 (2)| 00:12:42 |
|* 5 | INDEX RANGE SCAN | PK_TABLE2 | 7 | 266 | 3 (0)| 00:00:01 |
Predicate Information (identified by operation id):
4 - filter("COLUMN1"='SomeValue1234' OR "COLUMN1" LIKE 'SomeValue1234%' AND
REGEXP_LIKE ("COLUMN1",'^SomeValue1234[A-Z]{3}[0-9]{5}$'))
5 - access("ITEM_ID"="ITEM_ID")
Statistics
1 recursive calls
5 db block gets
227145 consistent gets
167023 physical reads
752 redo size
765 bytes sent via SQL*Net to client
1255 bytes received via SQL*Net from client
4 SQL*Net roundtrips to/from client
3 sorts (memory)
0 sorts (disk)
1 rows processedWhat can be the issue here?
I tried NO_UNNEST hint, which made difference, but still the DELETE was taking around a minute (instead of 2 minutes), but that is way more than that sub-second response.
Thanks in advancerahulras wrote:
SQL> delete from TABLE2 where ITEM_ID in (
2 SELECT ITEM_ID
3 FROM APP_OWNER.TABLE1
4 WHERE COLUMN1 = 'SomeValue1234'
5 OR (COLUMN1 LIKE 'SomeValue1234%'
6 AND REGEXP_LIKE (
7 COLUMN1,
8 '^SomeValue1234[A-Z]{3}[0-9]{5}$'
9 ))
10 );
The optimizer will transform this delete statement into something like:
delete from table2 where rowid in (
select t2.rowid
from
table2 t2,
table1 t1
where
t1.itemid = t2.itemid
and (t1.column1 = etc.... )
)With the standalone subquery against t1 the optimizer has been a little clever with the concatenation operation, but it looks as if there is something about this transformed join that makes it impossible for the concatenation mechanism to be used. I'd also have to guess that something about the way the transformation has happened has made Oracle "lose" the PK index. As I said in another thread a few minutes ago, I don't usually look at 10053 trace files to solve optimizer problems - but this is the second one today where I'd start looking at the trace if it were my problem.
You could try rewriting the query in this explicit join and select rowid form - that way you could always force the optimizer into the right path through table1. It's probably also possible to hint the original to make the expected path appear, but since the thing you hint and the thing that Oracle optimises are so different it might turn out to be a little difficult. I'd suggest raising an SR with Oracle.
Regards
Jonathan Lewis -
Hello
I am having issue where I have cancelled billing document corresponding to a contract, then also I canu2019t rebill the contract. I found in the header billing plan the status is showing is B(Partially processed) which is partially processed and for a line item it is showing C(Completely processed), though I have cancelled all the invoices. Can some one help.
DavidDavid
Try running reports SDVBUK00 and RVV05IVB to correct the status and/or billing index after carefully reading their documentation.
Hope this helps. -
hi guys,
I am facing with a problem like when i am trying to use the t.code: KP06 To use the cost center planning it is asking for a planner profile. i had tried to use the default profiles but it is giving an error like Entry does not exist in TKA50 (check entry).
Please tell me how to solve the issue.Dear,
Use Path
SPRO > Controlling > Cost Center Accounting > Planning > Manual Planning > Define User-Defined Planner Profiles.
Select the profile you want and click on General Controlling.
Select Cost ctrs: Cost element/activity inputs then click on Layout for Controlling and enter layout created by you or enter any existing one.
Once you have done all settings here go to KP06 and use SETTINGS > SET PLANNER PROFILE and enter the profile you maintained settings for.
Regards,
Chintan Joshi. -
Milestone Invoicing Plan Issue
Hi All,
We have successfully configured Milestone Invoicing Plan Scenario, but are facing one issue. We were successfully able to transfer PS invoicing plan to PO. After milestone is confirmed when we go to check PO in DISPLAY mode, block is still there. If we just switch to CHANGE mode in PO without doing anything else, the block disappears. Hence the functionality appears to be working but we have to switch to change mode and save PO once.Please let us know if anyone faced this issue earlier and what was the resolution.
Thanks in advance.Hi Ankesh,
It's the standard behavior in SAP. Contacted OSS.. no help. finally with the Help of WF and PO maintain BAPI we made that to Work -
SQL Server Maintenance Plan Issue
SQL Server Version:
Microsoft SQL Server 2005 - 9.00.5000.00 (Intel X86)
Dec 10 2010 10:56:29
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
Issue : Maintenance Plan - DB backup plan & TRN Log backup plan skipped / some times not deleting the old backup files.
Error : Failed to retrieve date for this request (Microsoft.SqlServer.SmoEnum)
Additional Informaiton
An exception occurred while executing a Transact-SQL statement or batch.
(Microsoft.SqlServer.ConnectionInfo)
A Server error occurred on the current command.
The results, if any should be discarded (Microsoft Sql Server)
Any experts can help me to resolve this issue.
Thanks
drmrpush
MRVSFLYHello,
Same issue reported here:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/601fd83c-c49f-4bf8-b69d-95431197652d/maintenance-plan-is-not-opening-on-sql-server-2005-sp2?forum=sqlkjmanageability
Please check solution on :
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3e53ba8b-ea23-4629-98db-43c80ba9888e/cannot-save-maintenance-plans?forum=sqltools
This problem occurs if some of the stored procedures while installing SP2 has not been applied successfully. So manually run the script below and it may resolve
your issue. It resolved ours and we went throught exact same process of re-installing several times.
1)
First go to the folder Install . The default location is this = “C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Install “ .
Please post back still your issue not resolves.
2)
Then in this folder find this “sysdbupg.sql” .
3)
Please open this script with a nodepad.
4)
Then copy the
whole script and then paste it in the Query window of the Management studio.
5)
Then execute this script.
6)
Once this script has been successfully executed, The issue should be resolved.
Regards, Pradyothana DP. Please Mark This As Answer if it solved your issue. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/ -
Hi ,
I am trying to configure workspace on windows server, my requirement is to refer shared servces from the
solaris server.
But confguaration fails , as it is trying to refer to shared services from windows.
I tried uninstall and re-install of workspace, it did not help.
I have also tried changing the workspaceconfig file to refer to soalris shared services , that did not help.
please suggest is there any thing else I can do to resolve this.
ThanksHi,
If you can't access planning through http://<planning machine>/HyperionPlanning/ then IIS set up must not of been successful.
By default it uses a isapi redirect filter to redirect from IIS to the correct port of say planning.
It is picked up from \Hyperion\common\appServers\Tomcat\5.0.28\isapi\isapi_redirect-1.2.14.dll
If you go into IIS management and select properties for your web server, under the ISAPI filters tab you should see the status of the filter.
It is configured using the property files :- uriworkermap.properties and workers.properties
Cheers
John
http://john-goodwin.blogspot.com/
Maybe you are looking for
-
when i try to display some special char, e.g '�' (ascii code 196 )in java it cannot display. The char is correctlly store in java. why cannot dispaly ?? could any one give my some idea ?
-
How do I clear a list of usernames which is automatically offered when I login to a site.
For example, if I want to sign into gmail, it asks for the username. As soon as I type in the first letter, it gives me a selection which it stored. Once I made a mistake and typed my password in there which also begins with the same letter. How do I
-
Nano syncronisation with Ourlook calendar
Although contacts sync well with the Nano I cannot get calendar sync to work. I get the error message "Ipod Nano cannot be updated. An unknown error occurred (50). Anyone got any ideas or had a similar problem? Other than that it is just fantastic!
-
Installing BiApps for the 1st time
Hi All, I'm brand new related the BI Apps question, but reading its documentation "Installation Guide for Oracle Business Intelligence Applications" at page 15 it's mentioned that BI Apps has prerequisites such as OBIEE and ODI. However, i'll
-
Problem finding process WSDL after deployemnt to server
Using: BPM Standalone Server 10.3 (o/s Red Hat Linux 5.0) Oracle BPM Studio 10.3 (Windows XP) I have exported a BPM project and deployed it to the Server using the BPM Processes Admin console. When running the project locally, I was able to target th