Would like to automate the process of hyperlinking pdf documents
I've been tasked with finding a solution to the following problem:
A need has arisen where I work where large PDF files (commonly > 2000 pages) need to be hyper-linked. The PDF files are in fact Brief's of Evidence (prosecution files) and are generally in a particular format and order. Generally, the order is as follows: 1. Various index documents, 2. Witness statements and 3. Exhibit documents. Usually there are many more exhibit documents than there are witness statements.
In each witness statement, the witness may refer to an many exhibit documents and it's this reference that needs to be hyper-linked to the particular exhibit document (located many pages away). As a standard each exhibit is allocated an exhibit number, commencing at 1 but displayed as "0001". The filename of the individual exhibit is accordingly named, "0001.pdf" Using Adobe Professional (version 7) these files are merged and as a consequence bookmarks are automatically created.
What tools from Adobe are available that will assist with programmatically or automatically scanning (checking) each witness statement (a pdf document) and where relevant predetermined (however that's done or achieved) areas (exhibit references) are required to be hyperlinked to their respective document many pages away.
Is this doable? Are there developer kits available?
Any advice appreciated.
Regards,
Steven Taylor
Acrobat can't do what you want out of the box. It needs a plug-in that can do that. Have a look at this third party plug-in for Acrobat: AutoBookmark Plug-in for Adobe® Acrobat® / Create and Manage PDF Bookmarks, Links and Destinations It has a trial version so you can test it to see if it meets your needs.
Similar Messages
-
I would like to add a watermark on my pdf document I have adobe acrobat XI standard
I would like to add a watermark on my pdf document I have adobe acrobat XI standard
You should have that option under Tools - Pages - Watermark...
-
I would like to automate the installation of FireFox to an alternate directory.
I am trying to automate the installation of FireFox to my servers drive "F:" but I have not found a way to script this option. Typical Windows installations would use the INSTALLDIR= option, but this does not work. I have seen several different spins on setting options (like the home page) but none of these scripts seem to address my issue.
When you download the installer, you can specify the install location. Once installed, any updates should also install in that location.
-
Automate the process of saving Framemaker documents (*.fm) as Xml Files
Hi,
I am new to framemaker. We have a list of Framemaker document files (*.fm files) coming into a folder. We need to pick up these files and convert to xml format (same as the saveAs opertion from the File menu).
I have written the follwing function to Save fm files to xml
Code to Save fm files to xml files
function saveAsXml (doc) {
// Get required parameters for the save function.
var params = GetSaveDefaultParams();
var returnParamsp = new PropVals();
// Replace the .fm extension with .mif.
var saveName = doc.Name.replace (/\.[^\.\\]+$/,".xml");
var i = GetPropIndex(params, Constants.FS_FileType);
params[i].propVal.ival = Constants.FV_SaveFmtXml;
// Save the document as XML.
doc.Save(saveName, params, returnParamsp);
How to automate this process so that code checks -
1) New fm files in the folder
2) Saves the fm file as xml
3) Moves the saved fm file to a different folder
Thanks,
GC
[Message moved to Scripting Forum by moderator]Have a look at the sample script below. The "while" loop waits for the specified number of milliseconds, then reads the contents of a directory and processes every individual file in the directory. In my example, it just prints the file path to the console. You would replace this part with your Open / Save as / Move sequence.
For more file system commands, refer to Adobe's Javascript Tools Guide, "File object functions".
var stop = false;
while( stop==false ) {
// Wait for 20.000 ms
$.sleep(20000);
var fld = new Folder("c:/incoming");
var filesInFld = fld.getFiles("*.fm");
for(var f=0; f < filesInFld.length; f++) {
// process the individual file
$.writeln(filesInFld[f]);
// Exit the loop after 19:00
var time = new Date();
if( time.getHours() > 19 ) stop = true; -
I would like to duplicate the folders and apps that I have set up on my iPhone to my iPad. Is there a quick way of doing this without going through the whole process again manually?
You can restore your iPad with your iPhone backup but items that are iPhone only will not transfer. It should recreate all your folders. It can't hurt anything to try.
-
large number of duplicate listings of songs. 1 (or several) is found and then 1 or more not-found with the circled "!" in col 1. I would like to automatically delete all duplicates and then all marked as not found. How do I do this without losing my one good copy?
large number of duplicate listings of songs. 1 (or several) is found and then 1 or more not-found with the circled "!" in col 1. I would like to automatically delete all duplicates and then all marked as not found. How do I do this without losing my one good copy?
-
I completed and ordered a hardcover photo book, Now I would like to order the same book but with a soft cover or wire bound cover. IPhoto doesn't seem to have a feature which just lets me change the completed book to another type of cover.
see my answer to your previous duplicate post
duplicate the book in case of issues and use the change \theme button - select the same theme and the new format - preview (in case anything has changed) and order
LN -
I would like to automate part of my workflow that involves opening stacked images as layers in Ps CS5 and running an PS action that composites the layers and processes the image. Something similar to 'Process Collection' in Bridge CS5 only with my own action instead of merge to HDR/Panorama.
Apparently this is possible with Mac 'Automator' - is there anything I can do in Windows? I don't have any experience with writing scripts, but have friends that can help. Can someone tell me if its possible and point me in the right direction please?Sorry but a script can not access Lightroom so your first step isn't possible.
Second step is Lightroom not Photoshop.
Maybe something could be done if you could work out a Photoshop Only workflow. -
I have a dilema i use a programme called Mackeeper i accidentally moved several checked files to my trash BUT i didnt delete them,i would like to put the files back where they belong but the put back option is in grey and wont work?? i have spoken to Apple and to no avail !!!
Mackeeper moved my files to my trash so i pulled them out of my trash to my desktop it has copied them to my desktop as well as kept them in my trash!!
im so confused and things are not working properly anymore such as my google chrome for example...all my book marks are gone BUT i can go to the google file which is out of place on my desktop and view all my bookmarks data...ALL of my files still exist but they are just out of place now which is making it hard for certain options on my computer to work...
the files includeAccounts,address book plug-ins,addressbook,Adobe,AIM,Alfred,Anquet Maps,Apple,Asramsoftware,Audio,Automatically add to itunes,facebook,facebook 15-53-13-329,faxfresh,five details,flipping book photo album, font collections, fonts, forismatic,Garageband,Gimp,Google,Google 15-53-13-344,icloud,icons,idocument lite,ilife media browser,ilifepage layout,internet plug-ins,ip scanner,itext express,itunes,iweb,Keyboard layouts,Keychains,launch agents,Librarian,limit point software,logs,mail,mail 15-53-13-895,messages,metadata,mobile documents,mobiscope,moso,movie effects,mozilla,MPlayerx,mywebcamBroadcaster,Native instruments,Skype and LOADS more......
HOW do i get this stuff back to where it is supposed to go so that these programmes work properly again???? i also used delete and command but that did not work either,like i said i have not emptied my trash and ALL the info is there its just totally out of place and the put back option will not work sor some reason!!??? im running 10.8.5 imac someone PLEASE help me!!
i have not set up time machine either but i do back up to a site called backupblaze...Step 1
Remove "MacKeeper" as follows.
"MacKeeper" has only one useful feature: it deletes itself.
Note: These instructions apply to the version of the product that I downloaded and tested in early 2012. I can't be sure that they apply to other versions.
IMPORTANT: "MacKeeper" has what the developer calls an “encryption” feature. In my tests, I didn't try to verify what this feature really does. If you used it to “encrypt” any of your files, “decrypt” them before you uninstall, or (preferably) restore the files from backups made before they were “encrypted.” As the developer is not trustworthy, you should assume that the "decrypted" files are corrupt unless proven otherwise.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A. The "MacKeeper" application is in the folder that opens. Quit it if it's running, then drag it to the Trash. You'll be prompted for your login password. Click the Uninstall MacKeeper button in the dialog that appears. All the functional components of the software will be deleted. Reboot.
Failure to remove MacKeeper will result from neglecting any one of these points:
Quit MacKeeper before dragging it to the Trash.
Don't empty the Trash after dragging the application to it. Let MacKeeper delete itself.
Don't try to drag the MacKeeper icon in the Dock to the Trash.
Here are some general suggestions. If you want your computer to be usable, don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
The only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Never install any third-party software unless you know how to uninstall it.
Step 2
Restore from the last backup that predates the unwanted changes. -
I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.
I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.
-
I made a photo book in iPhoto and would like to transfer the book to my iPhoto on other macs and iPad. How is this done and can it be synced between devices like photo stream?
You can create a Quicktime movie slideshow of the book's pages and share that. Here's how to get your book into an iPhoto slideshow and then export as a Quicktime video:
1 - While viewing the book type Command+P to start the print process.
2 - click on the PDF button and select "Save PDF to iPhoto".
Note: If you don't have any of those options go to Toad's Cellar and download these two files:
Save PDF to iPhoto 200 DPI.workflow.zip
Save PDF to iPhoto 200 DPI.workflow.zip
Unzip the files and place in the HD/Library/PDF Services folder and reboot.
3 - select either of the files above (300 dip is used for photos to be included in a book that will be ordered).
4 - in the window that comes up enter an album name or select an existing album and hit the Continue button.
That will create a 200 or 300 dpi jpeg file of the item being printed and import it into iPhoto. Immediately select all of the photos in the new album and sequentially renumber them as "Page " using the Batch Change ➙ Title to Text with the option to add a sequential number to each title. This is to let you put the pages back in the correct order in the event they get sorted incorrectly.
Now you can proceed as follows: create the slideshow in iPhoto and export it out of iPhoto as a QT movie file via the Export button in the lower toolbar. Select Size = Medium or Large (480p with iPhoto 9),
Happy New Year -
I would like to know the role of the each thread on coherence
Help me.
I would like to know the role of the each thread on coherence.
There are too many kind of threads.
Example ~
GC Slave GC Slave RUNNABLE
RMI TCP Accept-1972 RMI TCP Accept-1972 RUNNABLE
Health Center trace subscriber Health Center trace subscriber RUNNABLE
LT=0:P=342534:O=0:port=55170 LT=0:P=342534:O=0:port=55170 RUNNABLE
Attach API wait loop Attach API wait loop RUNNABLE
PacketListener1 PacketListener1 RUNNABLE
PacketListener1P PacketListener1P RUNNABLE
PacketListenerN PacketListenerN RUNNABLE
Cluster|Member(Id=1, Timestamp=2013-04-05 10:45:44.655, Address=192.168.240.157:8088, MachineId=50044, Location=site:,machine:TMTEST-PC,process:5316, Role=CoherenceServer) Cluster|Member(Id=1, Timestamp=2013-04-05 10:45:44.655, Address=192.168.240.157:8088, MachineId=50044, Location=site:,machine:TMTEST-PC,process:5316, Role=CoherenceServer) RUNNABLE
RT=0:P=342534:O=0:TCPTransportConnection[addr=192.168.240.157,port=55178,local=55170] RT=0:P=342534:O=0:TCPTransportConnection[addr=192.168.240.157,port=55178,local=55170] RUNNABLE
Finalizer thread Finalizer thread RUNNABLE
WT=10 WT=10 RUNNABLE
main main TIMED_WAITING
IpMonitor IpMonitor TIMED_WAITING
Invocation:Management:EventDispatcher Invocation:Management:EventDispatcher TIMED_WAITING
Invocation:Management Invocation:Management TIMED_WAITING
DistributedCache DistributedCache TIMED_WAITING
JMX server connection timeout 52 JMX server connection timeout 52 TIMED_WAITING
RMI Scheduler(0) RMI Scheduler(0) WAITING
Thread-6 Thread-6 WAITING
stop JMX Server on shutdown stop JMX Server on shutdown WAITING
Logger@9228429 3.7.1.7 Logger@9228429 3.7.1.7 WAITING
PacketReceiver PacketReceiver WAITING
PacketPublisher PacketPublisher WAITING
PacketSpeaker PacketSpeaker WAITING
WT=7 WT=7 WAITING
WT=9 WT=9 WAITING
-----------------------------------------------------------------------------------------------------------------------------------------------Briefly
PacketListener1 PacketListener1P PacketListenerN - listening IO threads for TCMP transport protocol
Cluster|Member(Id=1, Timestamp=2013-04-05 10:45:44.655, Address=192.168.240.157:8088, MachineId=50044, Location=site:,machine:TMTEST-PC,process:5316, Role=CoherenceServer) - main thread for cluster service (discovery, node joing / leave, etc)
IpMonitor - IP monitor, participates in death detection scheme
Invocation:Management:EventDispatcher - Event dispatch thread for distributed JMX service in Coherence
Invocation:Management - main thread for distributed JMX service in Coherence
DistributedCache - main thread for DistributedCache cache service
Logger@9228429 3.7.1.7 - Coherence async logging thread
PacketReceiver - Thread dispatching incomming network packets
PacketPublisher - Thread sending out packets via TCMP
PacketSpeaker - Thread sending out packets via TCMP (offloads some work from PacketPublisher for better core utilization) -
How to automate the process of Uploading RPD ?
Hi All,
I am on 11.1.1.6.0 and Windows server 2008. What I am wanting to do is to automate the process of uploading the repository on my development server and restarting the server automatically. And I want this to happen 3 times a day at specified intervals. For ex, I want that automatically, at 6:00 AM, 3:00 PM and 6:00 PM everyday my MUD repository should be uploaded to my development BI server without any manual intervention whatsover.
I know this can be done using the wlst sctipts. I have couple of questions around that will appreciate if anybody can answer both of them.
1. I don't know and understand the language which wlst scripts use. And even if somebody gives a ready script I should be able to understand that. So the question is from where can I learn that language. Like for BIP, we can learn xslt from w3 schools. How can i do for wlst tool/ scripts?
2. Lets say I learned the language and created a script abc.py which uploads the repository. But How will that be automatically called or run on my Development Server? By a windows batch script? If yes, then who will run that windows batch script ? Do I need to manually run that? Or running of Windows Batch script can also be automated and can be run at specified intervals as I want?
I'll appreciate if somebody can explain me this in detail.
Thanks,
RonnyCheck this
http://ssssupport.blogspot.com/2012/10/obiee-11g-deployment-using-shell-script.html
Any updates on this :)
How you end up with this?
Edited by: Srini VEERAVALLI on Dec 28, 2012 8:21 AM
Any updates Ronny!!
Edited by: Srini VEERAVALLI on Jan 2, 2013 7:33 AM -
Need to automate the process of partial orders-deliveries
Hi experts,
I need to automate the process of partial order deliveries in VL01N.
I checked few BAPI for the above requirement.
BAPI_OUTB_DELIVERY_CHANGE
BAPI_OUTB_DELIVERY_SAVEREPLICA
BAPI_OUTB_DELIVERY_CONFIRM_DEC
But have no clue ,which would be relevent.
If any one of you have worked on any such requirement before,please let know,which BAPI i can use in this development.
Thanks in advance.
MeenakshiHi
Try with function modules WS_DELIVERY_UPDATE and RV_DELIVERY_CREATE.
Regards
Srilaxmi -
Hi,
I have a plan of gifting popular gaming app to my user base based on certain criteria.
I'm aware that you can gift the app through itunes.
What i want to know if there is any way to automate the process, like any api calls to gift the app to my user base?
Any sugestion will be most welcome
AffuHi affu_india,
If you are looking to do volume gifting of an app, you may find the following page helpful:
Apple - Business - Volume Purchase Program for Business
http://www.apple.com/business/vpp/
Regards,
- Brenden
Maybe you are looking for
-
How do I transfer purchased apps from one mac to the other?
When i want to sync my iPhone in iTunes on my new computer I will lose all of the apps that I purchased. Can someone tell me how to sync it in a way (or some other solution) so I can keep my purchased apps? I'm using the same ID as on old mac. I hav
-
Is there a known bug with the zen vision;m and usb internet adapt
i bought the zen m yesterday. i've down loaded it onto my pc. audible wont sync to it. the creative firmware updater wont update it keeps saying its not connected. Windows media player synced to it ( the only thing thats gone right so far lol ) and w
-
How to get the value of a session bean through a scriptlet
Hi, I have defined a session bean in faces-config file and now I want to acces this bean object through a scriptlet. How should I go about doing that ? eg in faces-config file I have something like this <managed-bean> <managed-bean-name>pc_DepTest</m
-
On other browsers the videos are playing. But in firefox4 I don't see the video at all. But if I click in the center of the white space the video starts to play so I hear the sound. Since this was the case I upgraded all my plugins and yet no change.
-
Getting jms queue jndi name via jmx
Hi all, I'm writing a utility that will help us migrate jms messages to new servers, stores, etc. I would like to connect to a server and programmatically discover the jndi names of all the queues and topics on that server. I know how to get all the