WPA-Enterprise radius through IPSEC

Hi
I have a WRVS4400N and I want to use WPA-Enterprise. The Radius server is accessed through IPSEC VPN. I can connect to the radius server from clients behind the WRVS4400N, but I cannot ping the radius server from the WRVS4400N itself. Is this configuration possible?
Regards,
Hein Gustavsen

It is forgetting the network everytime the iPad sleeps - even when it doesn't require an unlock passwod.

Similar Messages

Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise. We have service through Charter cable.

Setting up iPad, don't know what to select for security; WEP, WPA, WPA2, WPA Enterprise or WPA2 Enterprise. We have service through Charter cable.
Thanks for your help!

Choose the strongest security available on your router, preferably WPA2 using AES encryption and a long complex passphrase with at least 14 characters (the maximum is 63 characters).

802.1x or WPA-Enterprise or Radius

I have seen a lot of posts mentioning compatibility with WPA encrypted networks. However, all these are WPA-Personal (or WPA-PSK), meaning they have a pre-shared key, or password, for authentication.
My question is whether 802.1x is supported on the iPhone. Many businesses, schools, etc., require this (sometimes called WPA-Enterprise) for authentication, in which a username and password must be entered rather than a shared-key.
Can any of you savvy new iPhone users answer this question? It would save me a trip to the store...
Thank you!
Various Macs and PC's Mac OS X (10.4)

No details on specific encryption support in the user manual, but I found this:
http://www.utexas.edu/its/alerts/announcements/iphonecompatibility_on_the_ut_wirelessnetwork/
"The iPhone does not support the WPA Enterprise protocol, the industry standard used to support user login on the UT network."
Powerbook G4 Mac OS X (10.4.10)

Extend WPA Enterprise

Does anyone know if there is any way I can connect my Time Capsule to my University wireless network?
I live right opposite my university and if I put my laptop on my window sill I can connect to the wireless, but can't connect from my desk... I was wanting to put my time capsule on my window sill, use that to connect to the Uni wireless and thus extend the connection into my room...
Does anyone know a way to achieve this? My Uni uses WPA Enterprise encryption...
Many thanks.
Andrew.

One possible option, with your existing equipment, would be to reconfigure your Mac as a "software" router by employing OS X's Internet Sharing feature. In this case you would be sharing the Mac's wireless Internet connection through its Ethernet port. Theoretically, you could then connect the TC to the Mac's Ethernet port; reconfigure the TC as a bridge, and then connect clients to the TC.
Personally I haven't tried this to verify that it would work. Mainly because using a Mac as a software router is extremely limited as far as features that this would provide.

Connecting MBA to domain using WPA Enterprise

Hi guys!
I'm having "the usual" new MBA WiFi-problems, meaning my MBA keeps dropping the WiFi connection occasionally, but that's going on in another thread.
I don't know whether this is a related problem, but I can't seem to connect the MBA to the WiFi network at the office at all. The network connection dialog tells me my connection needs WPA Enterprise credentials, but no matter what I write, I won't get connected.
So I'll start with the basics. This works for every other device I have (PC laptop, iPhone, iPads and so on):
Username: \\MyDomain\MyUserName
Password: MyPassword
But not for the MBA. For the domain/username, I've tried single \´s and /´s and just about any combination just in case this is a "Mac syntax thing" (this is my first Mac laptop), with and without the MyDomain part, lowercase, uppercase, quotation marks around the password (as I saw mentioned in some thread in the case of alphanumeric WEP, or some such), but nothing works. I don't remember the exact error message, but it has to do with the authentication server perhaps not being available.
Apparently others have had problems with the WPA Enterprise connections as well, but could somebody just confirm that the \\MyDomain\MyUsename -syntax I'm using is indeed correct.
Cheers,
Kim

Marc,
I'm suprised that WPA works over WDS. I had thought that because WPA cycles the encryption key with each message transmission that the two Airport devices would quickly get out of sync.
But I do respect Alan's opinion, so I'd give in to his statement that it does work, I'll be searching through the update readme's to see when it started working.
You could always drop back to WEP encryption. Unless you have the FBI next door listening in and analysing all your network traffic, it's not going to be broken.
WPA changes the encryption key with each wireless message, WEP doesn't. So in theory, with WEP, someone could analyse all your network traffic, looking for patterns. You can work out just how hard that is.
If you choose an obvious password (like from a dictionary) it won't matter if you're on WPA instead of WEP, the Feds / hackers will be in in a short time.

10.4.2 and WPA Enterprise NOT working

Dears,
I have 2 machines configured in this way:
- 10.3.9 with Airport card (no Extreme) and latest Airport drivers;
- 10.4.2 with Airport Extreme card and latest Airport drivers;
I try to connect to our WPA Enterprise wireless network and i got 2 different results:
- 10.3.9 connects and works;
- 10.4.2 returns an error, the logs show the following:
2005-08-18 13:23:17.601 SystemUIServer[380] EAPOLControlCopyStateAndStatus failed for "en1" (err = 6)
There was an error trying to get authentication status: 6
com.apple.network.EAPOLController not active
Before upgrading to 10.4.2 the same machine with 10.4.1 was able to connect to WPA Enterprise.
I further investigated on this, seems that under 10.4.2 the folder /System/Library/SystemConfiguration/EAPOLController.bundle is empty, while under 10.4.1 it contained some files (oh yes, I have the disk image of the workstation when it had 10.4.1).
Maybe the guru guys from Apple can see if the 10.4.2 updater deleted those files in error.. bye !

Hi Rick,
I did the following:
- Re-install 10.4.2 upgrade;
- Re-install Airport 4.2 upgrade;
- Repair permissions;
- Check Keychain.
I still got those errors in the logs:
2005-08-19 16:01:07.966 Internet Connect[280] EAPOLControlCopyStateAndStatus failed for "en1" (err = 6)
There was an error trying to get authentication status: 6
com.apple.network.EAPOLController not active
2005-08-19 16:01:07.971 Internet Connect[280] EAPOLControlCopyStateAndStatus err = 6
com.apple.network.EAPOLController not active
Using Internet Connect I can see our wireless network, that is correctly identified as being encrypted with "WPA Enterprise" but after I entered user/password I got the following error:
"WPA Authentication failed. There was an error trying to get authentication status: 6"
I double checked username/password, mac address, base station configuration (Cisco AP-1131) and Radius server, are all ok (the other mac, with 10.3.9 joins our WPA network succesfully).
I'm stuck here..

WPA-Enterprise WIFI dropping after IOS 6 Upgrade

We use WPA-Enterprise authentication for our WIFI and since upgrading to IOS 6 the connection needs to be reautenticated everytime the iPad is unlocked. This is a major inconveience. With IOS 5 you only autenticated one time and whenever you unlocked your iPad you were already connected.
These are the required settings which IOS 6 still automatically navigates, but it doesn't maintain the login name and password (which autheticates to a RADIUS server):
Network Authentication: WPA-Enterprise
Data Encryption: AES or TKIP
EAP method: PEAP
Inner EAP method: MS-CHAP v2
Check Use Windows user name and password
Uncheck Validate Server certificate

It is forgetting the network everytime the iPad sleeps - even when it doesn't require an unlock passwod.

WPA Enterprise Not working in MAC

I have install the Cisco 1131 ap with acs 5.0
I have configured AP with WPA with Radius Authenticationable
All Windows 7 & XP user connected
MAC user is not connected
there are two option wpa enterprise & wpa2 enterprise

hello
on your ACS 5 access policy for wireless, check that EAP-GTC is allowed under "allow PEAP" in the "allowed protocols" section.
hth
andy

WVC210 and WPA-enterprise

I bought a WVC210 and want to configure it with WPA Enterprise. Regarding to http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6918/ps9692/ps9944/ps9948/data_sheet_c78-504108.pdf it should be an option, but it isn't in the admin config pages. I've tried updating the firmware (1.0.0).
Why doesn't it work? Any help is appricated

Hi!
The firmware is now out and I have the options in the web interface! But, I can't get it to work. We have Cisco Aironet APs with WAP-EAP against a MS IAS (via RADIUS) with certificates configured. I've tried to upload the certificate to the cam but it doesn't work. The webinterface doesn't offer much help. Is there any guide or something like that?
Thank you!
Andreas

WPA-Enterprise: WRT54GL or WAP54G or...?

Hi!
I'm planning to implement a WPA-Enterprise network with WPA encryption and 802.1x authentification through a FreeRADIUS server.
It's a requirement that all clients recieve their IP from our central DHCP server.
I'm considering both a WAP54G AP and a WRT54GL (since it's very versatilie with option for 3rd party linux OS and the difference in price is minimal) for this setup, although I'm open to other suggestions.
Anyone have experience in setting up a WPA-Enterprise and FreeRADIUS network, who've perhaps experienced either success or problems with it?
In regard to the WRT54GL I obviously need to disable the builtin DHCP server, but is it possible to achieve the DHCP passthrough while maintaining a IP on the router's WAN port for remote administration?
Kindly,
Thomas

Thanks for that info - I was thinking we had to plug the WAN cable into a LAN port, which I feared might screw around with the connection to the 802.1x authentication service.
Additional question:
Anyone know if roaming between AP's works (flawlessly?) when you're authenticated through 802.1x?

AP541N - WPA Enterprise - Failed to connect

Hi,
I am trying to configure an AP541N with WPA Enterprise. My RADIUS server is an MS ISA 2003 and is already working fine with other devices (I have a ASA5510 also configured to use RADIUS authentication with this server). When I try to connect, I am getting the following error message on the event log of the AP541N:
Aug 4 18:37:36
info
hostapd
wlan0: IEEE 802.11 STA 00:19:d2:9e:7a:81 deauthed from BSSID 00:21:29:01:60:e0 reason 1
Aug 4 18:37:36
info
hostapd
wlan0: STA 00:19:d2:9e:7a:81 IEEE 802.1X: Supplicant used different EAP type: 1 (Identity)
Aug 4 18:37:36
warn
hostapd
wlan0: STA 00:19:d2:9e:7a:81 IEEE 802.1X: authentication failed - identity 'MYDOMAIN\myuser' EAP type: 0 (Unknown)
Aug 4 18:37:36
info
hostapd
The wireless client with MAC address 00:19:d2:9e:7a:81 had an authentication failure.
Aug 4 18:37:36
warn
hostapd
wlan0: STA 00:19:d2:9e:7a:81 IEEE 802.1X: could not extract EAP-Message from RADIUS message
However, I do not see any error message on the ISA side. It actually tells me that the authentication happens fine. Any suggestion how I could troubleshoot this problem?
Thank you in advance for your help and have a great day,
Alex

After investigation, I found that my ISA server was not configured properly. Here is the URL I used to configure it properly: http://technet.microsoft.com/en-us/library/cc779009(WS.10).aspx

Power Mac G4 won't connect to WPA Enterprise

At the university that I work at we are updating our wireless network to use WPA Enterprise only, instead of WEP 802.1x and WPA Enterprise. The computer that I am having problems with is our test machine for writing connection documentation for the students, faculty, and staff. I can get the computer to access the network trough WEP 802.1x but not WPA Enterprise. The computer will start the connection process and then fail and not connect to the network.

First, make sure you have at least these versions of the Airport software:
107795- AirPort Card: When You Can Join a WPA Network
Then read this article about set-up, including WPA Enterprise:
107921- AirPort for Mac OS X 10.3 or later: Using different types of wireless security (WEP and WPA)
"For a school or business, WPA Enterprise can provide each user with unique credentials. WPA Enterprise uses the same security as WPA Personal, but with the added measure of individual usernames and passwords (WPA Personal uses a shared password). Each wireless base station communicates with a RADIUS server to authenticate the user's credentials."
"You may need the help of a network administrator to join an 802.1x network."

Connect to WPA using RADIUS and certificates

Hello all,
I have set up my Airport Extreme N to use WPA enterprise encryption via a freeRADIUS server using EAP. I created my own public key infrastructure using openSSL and I am able to connect to the WLAN with my Windows XP notebook using this authentification method.
Now with my macs I am kind of lost. First I installed the root certificate using the keychain app into X509Anchors and the client certificate into the login keychain.
Both certificates are marked with a red X saying that they have been signed by an unkown instance, even if I set them to Always trust in the menu.
Now I fired up my Airport Card in my iMac and tried to use the internet connection app to login into the WLAN. When I try to choose the protocol "TLS" and click Configure I cannot chose the freshly imported certificates.
Do I have to add something special to the certificates to make them work under MacOS X, or can I take the same certificate for Windows and Mac?
Thanks for your help!
Best regards
Thomas

The solution to the problem was that the certificate created with OpenSSL in the pem format has to be converted into the p12-format to make it selectable in the TLS dialog.
Now I authenticate my MacBook Pro with certificates at my AirPort Extreme (pre N-version) using a freeRADIUS server as a backend.

Does WET200 support WPA-Enterprise/TKIP?

I could not connect a WET200 (newly bought) to our WPA-enterprise/TKIP wireless network.
Can anyone tell me what was wrong? Does WET200 support WPA-enterprise? Please help!
Thanks a lot.

B**r!!!
oh well, one can only hope that there'll be an upgrade real soon now
Alex

LaserJet CP1525nw & WPA-enterprise

We bought a LaserJet CP1525nw printer because of its airprint support for printing from our iPads. Our wireless network uses WPA-enterprise security.
We are unable to connect the printer to the wireless due to the enterprise authentication. ipad is unable to find the printer.
We need printing from the iPads, ePrint does not offer. Any help would be much appreciated. Firmware 20110329.

Hello,
If you have not already, I might recommend going here and then looking at the link for iPad printing for ePrint/Airprint or ePrint Home and Biz. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

WPA-Enterprise radius through IPSEC

Similar Messages

Maybe you are looking for