WPC - Cannot render container

Hi experts,
We are having a problem with our WPC. The error is:
Cannot render container : An error occurred while loading the document from the resource content
The error happen quite often and normally it's back to normal after we restart the server. For your information, we are using EP 7.00 SP18.
Rgds,
Nanie

Solution:
Apply Note No. 1178294 regarding /etc repository in cluster environment.

Similar Messages

WPC Cannot render container with special characters

Hi
My portal generates error: "Cannot render container : An error occurred while loading the document from the resource content" when i Finish editing my page.
The special characters that I use are words with accents only with capital letters (used in spanish like Á, É, Í, Ó, Ú)
Any ideas on what could be causing this?
Portal 7.01 SP06
Jose Mercado

I solve my problem, with Sap Help.
They send me: check the charset settings on client & J2EE as follows
On Client side: Internet Explorer menu > Tools -> Internet Options -> Advanced
please select 'Always send URLs as UTF-8'.
On J2EE engine: . It is important to check the parameter exists for all server nodes in config tool
-Dhtmlb.useUTF8=X
-Dfile.encoding=ISO-8859-1
-Dfile.encoding=UTF8

WPC Error- Cannot render container : An error occurred while loading the do

Dear All
we are on SP13 / EP 7 ..we have created sites using WPC and when we try to trasnport with GUIDSs we got to know that SP13 does not suport GUIDs ..so i have deplyoed SP14 WPC abd the interfase looks differnt and it gives erros ..again i undeployed the SP14 WPC and deployed the SP13 WPC , after that interfase looks ok but we are getting an error in when we try to edit pages through WPC..
following messgae appera when we open up a page to edit in WPC
Cannot render container : An error occurred while loading the document from the resource content
we found this exception in error log in Server..
couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
#1.5 #00145ECC9C6700780000002500000B80000463656B4E6BC6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(142)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###Couldn't read content with ID -1. Select again...#
#1.5 #00145ECC9C6700780000002600000B80000463656B4E78E6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###couldn't retrieve contents with id -1#
#1.5 #00145ECC9C6700780000002700000B80000463656B4E812B#1235187149283#com.sapportals.wcm.WcmException#sap.com/irj#com.sapportals.wcm.WcmException.WcmException(62)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Plain###couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
     at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.getInternalStream(DBContentInputStream.java:345)
     at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.<init>(DBContentInputStream.java:50)
     at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.selectDocumentContent(BasicPersistenceDB.java:1632)
     at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:143)
     at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:95)
     at com.sapportals.wcm.repository.ContentImpl$ContentWithPrefetchedInputStream.<init>(ContentImpl.java:402)
Please tell us how to fix this error
regards
Buddhike

Need to upgarde to SP14

WPC - Custom Web Form - Cannot render container

Hello!
I've created custom web form for WPC (wpc_utg_sitelink) and gone through customizing provided in
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/2041eb17-6001-2b10-b08d-b95ce55fa9b7&overridelayout=true]
It looks fine at designtime.
In runtime i get following:
Cannot render container : Could not load stylesheet.com.sap.engine.lib.xml.util.
NestedException: Error parsing query. -> java.lang.ArrayIndexOutOfBoundsException
are there errors in my wpc_utg_sitelink.xsl file syntax?
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:wpc="com.sap.nw.wpc.km.service.linkmanager.XsltHelper">
<xsl:output method="html"/>
<xsl:template match="/">
<span>
<xsl:if test="starts-with(document/elements/element[@type='image'],'/')"></xsl:if>
<h2>
<a>
<xsl:if test="string-length(document/elements/element[@type='itemlink']/@rid)!=0">
<xsl:attribute name="href">
<xsl:value-of select="wpc:getAccessLink(string(document/elements/element[@type='itemlink']/@rid))"/>
</xsl:attribute>
<xsl:if test="document/elements/element[@type='itemlink']/@targetnew='true'">
<xsl:attribute name="target"> new </xsl:attribute>
</xsl:if>
</xsl:if>
<xsl:value-of select="document/elements/element[@type='title']" disable-output-escaping="yes"/>
</a>
<xsl:if test="document/properties/property[@type='isnew']/@value)='true'">
<span>New!</span>
</xsl:if>
</h2>
<p>
<xsl:value-of select="document/elements/element[@type='text']" disable-output-escaping="yes"/>
</p>
</span>
</xsl:template>
</xsl:stylesheet>
Or may be some problems in customizing?
Thanks!
Edited by: Ivan O. Ivanov on Sep 21, 2009 5:15 PM

solved!

FAQ web form throws - Cannot render container ERROR

Hi All,
I used FAQ web form to create a web page. In the FAQ web form i had given link to some document and also some internal links.
After saving the web form and previewing did not throw any eror. But when attached to a role and accessed the page.. getting
this ERROR " Cannot render container : An error occurred while loading the document from the resource content ".
Can somebody tell me the reason for this .??
Regards,
Archana.

Hi Archana,
I have faced the same error like you. The /etc repository is not working. Please check whether the network share used by this repository is available. You can check also SAP Note 1178294 regarding /etc repository in cluster environment. The /etc repository is used by the XML forms. In your case, you used FAQ web form to create web page and the form is built using XML form.
Good luck!!!
Regards,
Faeza
Edited by: norfaeza mat noor on Jul 9, 2009 1:59 AM

Cannot render files. The following message appears: file error; the specified file is locked

Suddenly I cannot render any project in Final Cut 6, because a message reads: file error: the specified file is locked. Any clues on what to do?

The reason we suggest searching is there are too many possible causes and unlikely answers and FCP6 was a long time ago.
bogiesan

DigiVox A/D - Cannot render audio capture

Hello, i have DigiVOX A/D. I configured it and I can watch TV. But when I try to capture it, there is a "Cannot render audio capture" message. I tried a lot of parameters changes but nothing helped. Can you please help?
Juso

So I did some more testing. Now it works this way:
I can watch TV and it works OK. When I click capture it doesn't work and it writes error message "Cannot render audio capture". I go to settings and setup to capture only audio. I try to capture. I do some more modifications. It still doesn't work. But on some point of configuration (I could't find exaxtly when) the sound stops during watching. And if I try to capture at that time, it captures OK with audio and video. It doesn't matter whether I use Mpeg 2 or Mpeg 4. Both works. So I think codecs are OK. And it works so (no audio during watching and good audio and video during capture) till I close the application. When I start it again, there is sound when watching and error when clicking capture button. And again I can do some settings modification (random) and after some config steps it start capture but stops audio while watching.

Air 3.2/3.3 with iOS 5.1.1 & 6.0 SDK Beta on iOS 6 Beta cannot render anything at all

Hi there,
I've just tried to run an air app on iOS 6 but all the vistual elements doesn't render properly, e.g. the tab view cannot render tab icons/tab bar, the action bar cannot render anything at all plus all other components...
Please let me know if you have any idea about that.
Many thanks.

Firstly the GPU issue has been fixed but the autoOrients property is still not working with the latest "AIR SDK 3.3.0.3690 SDK + iOS 6 Beta 2 SDK" on an iPhone 4S with iOS 6 Beta.
I cannot use this combination below, except I take out the second line:
<autoOrients>true</autoOrients>
<aspectRatio>portrait</aspectRatio>

"Hardware Cannot Render" Message!! ProRes footage.

Hi all,
I have a brand new G5 2 x 2.26 Quad; 12Gb Ram, and 2 graphics cards (ATI Radeo HD 4870 & NVIDIA GeForce GT120) And have just recently changed from capturing/editing HDV, to ProRes.
When editing HDV I was able to process some effects no problem, but now I am getting this Render Error message - The canvas goes completely red and message says "...The Effect "***" failed to render: Your Hardware cannot render at the requested size and depth!!"
I've tried a google search on this problem, and came across someone saying to change the 'Video Processing' tab to have "Render in 8-bit YUV" option. I did have it set to "render 10-bit YUV material in High Precision YUV" Gave that a go, and it didn't work. Have also come across someone saying that having 2 graphics card might be causing the trouble, and to take one out - but don't want to do that unless it's really necessary.
Can anyone help me clairfy what the problem is and if I can sort it?
Thanks

Hi Shane,
I don't mean to question you guys as you are undoubtedly far superior in knowledge to how this works - but I find this really hard to believe, after all, this G5 tower is only 1 month old, and I've got the only 2 graphics cards that mac currently sell on the site :
ATI Radeon HD 4870
NVIDIA GeForce GT 120
If anything, I would have thought that it could process my footage NO PROBLEM!
I hope I don't sound too cheeky in my response - as I say - I bow to your superior knowledge.
The filter in motion worked Tom, although I had to render the clip and it gone a bit sluggish (That may be to do with setting up as HDV in Motion and dragging into a Prores timeline?)

Cannot process container

Hi all
While synchronizing I am getting the following error message and Sync stops.
"Cannot process container 45F94C53051619F3E10000000A825320 for
unregistered method MI_CONFIG_INFO; ignore container"
Had anybody seen this kind of error during sync. Do I need to add any paramenters in "MobileEngine.config"?? Please let me know
Thanks
Raj

Hi Rajasekaran,
Please check if you have made the necessary settings in the table BWAFMAPP in the midleware. This is a mapping table which contains the method name coming from the client & the actual method which needs to be called.
The entries should be
MI_CONFIG_INFO -> ME_CONFIG_INFO_RECEIVE
MI_CONFIG_INFO_CHECKER -> ME_CONFIG_INFO_CHECKER
Regards,
Nameeta

When trying to render i get the error "your hardware cannot render at the requested size and depth"

when trying to render i get the error "your hardware cannot render at the requested size and depth" and does not render,, it is the first time, and happens only when i added a filter from magic bullet and won't render.

Do you have 2 graphics cards in your system?
You can check out your hardware profile using the "System Profiler" app which lives in the /Applications/Utilities folder ... you can also launch it from the Apple menu by choosing "About This Mac..." and then clicking the "More Info..." button. When the app launches you can choose Graphics/Displays from the Contents/Hardware list at left.

Cannot Render from SpeedGrade CS6

So, I'm doing some testing to see if SpeedGrade CS6 is for me or not, and honestly…I love what I've seen so far. But, I'm having an issue that's probably easy to resolve (no pun intended), but for the life of me I can't figure out why.
I put a quick sequence of 4K R3D files together in Premiere CS6, exported an EDL, opened the EDL in SpeedGrade and linked back to the footage. Everything seems to work fine. I've graded my clips, added a vignette, and now I'm trying to render/export. But the "Render" button seems permanently greyed out. No matter what combination of output options I choose, it just won't let me start a render session. I'm running the latest CS6, updated via the Adobe Updater. I'm working on a 15" MacBook Pro with Core i7 processor and plenty of RAM. The only connected peripheral is a Thunderbolt RAID setup.
Any ideas why I can't render?
Thanks!

Hello Stephen,
simple things first...
Did you set an output name?
If not, the render button will be grayed out.
Cheers
Thomas
Am 21.06.12 21:25, schrieb stephenamick:
>
Cannot Render from SpeedGrade CS6
created by stephenamick <http://forums.adobe.com/people/stephenamick> in /SpeedGrade/ - View the full discussion <http://forums.adobe.com/message/4511674#4511674

Cannot render resource resourceWrapper

running 5.4. we patched our publishing instance to the latest crx 2.2.73 and security updates and now we're getting this error:
23.10.2012 13:49:24.974 *ERROR* [127.0.0.1 [1351000164957] POST /content/usergenerated/content/sample-site/2012/submissions-test.form.html/content/sample -site/submissions/view HTTP/1.1] org.apache.sling.servlets.get.impl.DefaultGetServlet No renderer for extension html, cannot render resource ResourceWrapper, type=foundation/components/form/actions/edit, path=/content/sample-site/submissions/view/jcr:content/body/start_0, resource=[JcrNodeResource, type=foundation/components/form/start, superType=null, path=/content/sample-site/submissions/view/jcr:content/body/start_0]
this is caused by a form used only to redirect to another page...
i have it as a edit resource(s) action type with a text field that the element name is :redirect and value is './edit'
which is the way it's done in the geometrixx site
still works on our authoring instance (which is up-to date with patching) but our publishing is getting this...
if someone could shed some light on this it would be much appreciated

The bug is logged. As a temporary workaround overlay & add an empty /apps/foundation/components/form/defaults/action/cleanup.jsp to the form action.

Air 3.3 with iOS 6 cannot render anything at all

Hi there,
I've just tried to run an air app on iOS 6 but all the vistual elements doesn't render properly, e.g. the tab view cannot render tab icons/tab bar, the action bar cannot render anything at all plus all other components...
Please let me know if you have any idea about that.
Many thanks.

Hi,
I have not tried iOS6 myself, but release notes for yesterday show:
(7/11/12) Air SDK 3.3.0.3690
http://helpx.adobe.com/flash-player/release-note/developer-release-notes-11_3.html#main_Fi xed_Issues
FIXED ISSUES:
AIR on iOS apps using GPU render mode crash on iOS 6 devices. (3211902)
I don't know if this crash fix relates to the same rendering bug..
http://www.adobe.com/devnet/air/air-sdk-download.html
[edit]
oh sorry, i had not noticed Pahup already posted this...

Air 3.3 with iOS 6 cannot render well

Hi there,
I've just tried to run an air app on iOS 6 but all the vistual elements doesn't render properly, e.g. the tab view cannot render tab icons/tab bar, the action bar cannot render anything at all.
Please let me know if you have any idea about that.
Many thanks.

I just checked (http://forums.adobe.com/community/air/development/mobile) - looks fine to me. Nobody here is going to be able to help you with your AIR app.

WPC - Cannot render container

Similar Messages

Maybe you are looking for