Wrong behavior when search for PO in status Confirmed by vendor.

Dear Experts,
We use SRM 550 and we work with POR,
The problem is that after we create POR with quantity like the PO has there are no results if we try to search PO whit the status "Confirmed by vendor"
The problem is that after we create POR with partly of the PO quantity there is no results if we try to search PO whit the status "Partly Confirmed by vendor ".
Can someone know if we need to implement a BADI or something else?
Thanks
isiaki

solevd

Similar Messages

The following error occured when searching for on-premises exchange server

I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Cara
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

Searching for a Project status = CLSD and open purchase orders?

Hi,
I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
This staus should allowed to process with open orders BUT not allowed to add new orders after setting this status.
Have somebody any idee? Or it is impossible?
Tahnk you in advanced for your Help.
Regards Baldy

Hi TV-kid,
while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
To whom shall I write?
Thanks
Cheers
Cheers

Is it just me, or is this NOT how the new iTunes store is supposed to look when searching for a song, TV show, or app?

Take a look...that's just weird! When searching movies it looks fine, but when searching for songs, TV shows, or apps, this is what you get. Notice all the DI6 and SF6? I mean I know iTunes 11 just came out and all, but THIS kind of surprised me. Wanted to see if I'm the only one seeing this or if others see it too.

Ok, Apple has fixed it now

Can't find my iweb domain file when searching for it in iweb seo tool

I am trying to get my iweb website recognized by Google. Can't seem to get the google html code to work in html snippet. So am now trying to use the iweb seo tool but can't find my iweb domain file when searching for it in iweb seo tool. My file is in user/library/applicationsupport/iweb/name.sites2
It shows in the folder but is not active, so I can't choose it.

The SEO ftp client is not what I'd recommend using. Once you add the metadata to a local copy of the files use a 3rd party ftp client like the free Cyberduck to upload the files. Much more reliable.
Google does not use keywords for it's searches although other search engines do. Create a test page on your site (leave it out of the navbar) and try adding Google Analytics to it with Wyodor's instructions. If you get it to work then all you need to do is copy and paste the HTML snippet from the test page into your site pages.
For information on visitors to your site you can also use StatCounter. It records the number of visitors and a lot more: where they are from, what browser used, which page visited and what site/page then came from for just a few. SC is easy to add to the pages as you get the code for your account, put it in an HTML snippet add the snippet to each page. Old Toad's Tutorial #13 - Adding a StatCounter as an HTML Snippet describes how to do it.
Again use a test page or a separate test site to work out the details before adding to your site pages.

Authorization check when searching for transactions

Hi all,
We have a requirement to show only those activities for which a user is authorized. A custom authorization object has been maintained and the check in CRMD_ORDER has been extended accordingly. When opening an activity, the check is executed correctly, but when searching for activities, ALL activities are still shown, so the check is not performed at that particular moment. I have tested with standard authorization objects as well, but none of them are taken into account. Does anyone of you know how we can have the authorization check executed before or during the search, so that only those activities are shown, that the user may maintain as well.
Thanks in advance!
Regards,
Joost

Hello Joost,
Check if BADI CRM_ORDER_INDEX_BADI could not map your requirement.
Regards,
Frédéric

Editor: Annoying pop-up for choosing main programs when searching for text

Hi,
We're upgrading to ECC60 and are getting frustrated when searching for text in a source code within the ABAP editor.
For every include contained in the main program you are searching in there is a pop-up asking to choose the main program for that include.
This can get crazy when searching in a standard SAP program such as SAPMV45A. You'll have to process through 30-40 of these pop-up windows before your search results appear. I each pop-up you have to scroll though dozens of main programs to find the one you are doing the search in.
Can this be turned of somehow to have the search functionality work as it did in previous version, where the Editor knows that the program you are launching the search from is the main program you want the results from?
Thanks,
Peter

HI Peter
Please check if program: <b>RPR_ABAP_SOURCE_SCAN</b> can help you...
Regards
Eswar

Error when searching for entries in secure store

Hi All,
I need to assign the certificate in the sender agreement for signature verification and decrpting. So when i search for entries, i am getting the error as " Error when searching for entries in Secure Store".
Details of the Error is showing as:
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
What is the reason for the above error and how to rectify it..?
Suggest some useful solution
Regards
Prakash

Hi All,
Can anyone suggest some ways to rectify the error, as i am not able to find solution for the error in the
forum.
Regards
Prakash

DeskTop Manager freezes when searching for apps

Have the most recent 4.6 software installed. Worked on day 1 with my new Bold, now everytime it searches for Apps, the status bar goes to what looks to be 100% then freezes. Cannot load anything? Anyone having this problem?

Yeah. Check out my post here
http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
Message Edited by jmrmb80 on 11-06-2008 11:32 PM
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

TS4147 contact address not visible although data is present when searched for

I'm trying to view address information on an existing contact record but it is not showing, When searched for, it returns the relevant record but the data is still not visible. All contact info has been reduced to just phone no, email and notes.Help!

Hi Vetsrini,
Many thanks for offering to help. It has just been solved. It was a typo in the XML of the name of the column.
Doh! Obvious now that I know!
- Jenny

Creating new selection criteria when searching for PR

Hi,
Need help. i want to add selection criteria when searching for a Purchase Requisition (PR).
Currently, when u go to ME52N/ME53N, and you click on 'Other Purchase Request' then you click on F4 the following option are only available when searching for some criteria of PR.
Purchase Requisition per Asset
Purchase Requisition per Requirement Tracking Number
Purchase Requisition per Services
Purchase Requisition per Purchasing Group
Purchase Requisition per Order
Purchase Requisition per Cost Center
Purchase Requisition per Material
Purchase Requisition per Network
Purchase Requisition per Project
Purchase Requisition per Sales Document
my intention to add option perhaps like :
Purchase Requisition per Requestor (the one who created the PR)
Purchase Requition per Short Text
How can i achieve this? Thanks in advance.
She

Hi ,
Goto OS52. Press F4.
Enter thedevelopment class as ME.
Select MBAN, then Enter .
Click on Included Search Helps.
You need add your search.
Explain your requirement to ABAP team . They will help u in updating the search help.
Regards
Ramesh Ch

On iOS 8.3 there is no keyboard shown when searching for contacts on Contacts tab

I've updated my iPhone 5C to 8.3 and now I can't use the keyboard when searching for a contact from the Phone app. Using the Contacts app the keyboards works well. No 3rd party keyboards were installed. Anybody else having this issue?
Cheers,
Tamas.

Okay, several reboots solved the problem

Tab focus behavior when searching selected text

In the previous versions of Firefox, when I selected some text on a webpage, right-clicked the text to get the context menu, and clicked the "Search" option (e.g. Search Google for "my text selection") the currently focused tab would stay focused and a new tab would be launched to handle the appropriate search in the background. Ever since I updated to Firefox 13, the new tab now receives focus when I do a search on selected text.
How can I switch back to the old behavior? This change in functionality is driving me crazy. When reading a webpage, I often like to select words and phrases about which I want to learn more and launch searches to Google and/or Wikipedia via the context menu. I almost always like to finish reading the current page before going off to read the new tabs. Even if I did intend to stop reading the current page and go to the new tab, it often takes many seconds for the new tab to load and I would rather keep reading the current page and switch to the new tab manually than stare at a blank tab while I wait for it to load.
In the "Tabs" tab of the options window, there is a checkbox for "When I open a link in a new tab, switch to it immediately." Is there anything like this for new tabs launched by a context menu search?
Thanks!

hey bob, you can enter '''about:config''' into the location bar of firefox, confirm the info notification (in case it shows up), search for the preference named '''browser.search.context.loadInBackground''' & toggle it to true by double-clicking it. that should bring back the old behaviour...

When searched for, my podcast shows up with my name only.

Hello there. My buddy and I decided to make a podcast and all is going well, except when I search for it it just shows up as "Blake's Podcast" by "Blake Perdue" in the results page. No picture either. However, when you click on it the podcast itunes page itself looks completely fine, with picture and proper titles.
http://dalarandrivein.podomatic.com/rss2.xml
I don't really know what I've done wrong. Any help would be greatly appreciated. Perhaps it's just a matter of waiting?

As you say, the Store page is fine, and you can subscribe and get correct results. The feed seems to be OK.
Was your podcast previously entitled 'Blakes's Podcast' and you changed the title? Experience of other posters here suggests that for some reason the search results page can take a lot longer to update than the Store page does; so if this is the case it's just a question of waiting until it sorts itself out.
If your podcast was never entitled 'Blake's Podcast' then there is no obvious explanation, and I could only refer you to Support:
http://www.apple.com/support/itunes/store/podcast/

Short dump "Time limit exceeded" when searching for Business Transactions

Hello Experts,
We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
Number of Records:
CRMD_ORDERADM_H: 5,115,675
CRMD_ORDER_INDEX: 74,615,914
We have done these so far, but the performance is still either poor or times out.
1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
6. Searched for notes and there are no notes that could help us.
Any idea what is causing this issue and what we can do to resolve this?
Regards,
Bala

Hi Michael,
Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
Regards,
Bala

Wrong behavior when search for PO in status Confirmed by vendor.

Similar Messages

Maybe you are looking for