Wrong Calculation of Tax Amount

Hi to All,
While making Down Payment Request (F-47) with reference capital PO, system is showing a warning message as below:
Tax entered incorrect (code FU, amount      45,766.25), correct      36,882.24 INR
Message no. FF707
Diagnosis
The system checks the tax amounts for each code on document level. However, the amounts entered deviate more from the amount calculated (using the percentage rates defined in the tax code) than is allowed considering rounding errors.
Procedure
If this message is a warning message, you can confirm that your entry is correct by pressing "Continue".
If this message is an error message, you should correct the tax amounts or the base amounts, depending on how your tax code is defined.
For more clarity: whatever the tax code is in PO same tax code giving in F-47. But in both scenarios system calculating differently.
what could be the reason? Please guide me?
Regards,
Schilukuri

Hi SDNer,
Thanks for your reply.
As you said, In PO system does not calculate tax based on the tax code,it will calculate based on the pricing procedure.
Now my doubt is whatever the tax amount is showing in PO that we need to enter in to F-47,But here system is showing
(Tax entered incorrect (code FU, amount      45,766.25), correct      36,882.24 INR).
Now what should I do? Please help me on this..
Regards,
Schilukuri

Similar Messages

  • Reg: Correction of Wrong  With holding tax  amount  Values Posted via BAPI

    Hello Experts,
    I have posted some invoices using BAPI_ACC_DOCUMENT_POST with With holding tax code and amount now the thing is that ..the document is posted successfully  with Wrong  With hoding tax amount data in TABLE WITH_ITEM due to this while executing t-code F-53 ( Outgoing payments )   its not calculating the with holding tax amount for the invoice .
    Now i wan't to correct ( Negate some values) the values in  WITH_ITEM table.....
    How am i going to do it..!
    Plz..experts help.
    Plz waiting for your input

    Dear All,
    this is not an error but the Standard System Design. Please read the note 611844. Only if You insert manually the WT amounts during the posting You will see them into the WT TAB after the posting. If You make the System to calculate the WT Aamounts automatically, no WT amounts will be reported into MIRO/MIR4. You can see them into the follow on document.
    I hope this helps.
    Mauri

  • S_ALR_87012357 / S_ALR_87012356-Wrong reporting of tax amounts on the tax reports.

    Hi,
    S_ALR_87012357 / S_ALR_87012356
    Tax amount for tax codes V9, VP and VT are calculated and
    displayed correctly in FI reporting but they are reported at a higher amount in
    the tax reports run by transactions S_ALR_87012357 / S_ALR_87012356.
    Since its a standard report , I would expect there would  be a way of correcting this wrong tax amount showing this report .
    Is there any SAP note regarding this error ?
    Appreciate your help and advise..
    Kind Regards
    Thiru

    Hi Srikanth ,
    As you mentioned it is showing the difference ...
    Please find attached screenshot ...
    Is there a way to correct this ? since its creating an issue& confusing from Finance/Accounting point of view...
    Kind regards
    Siva..

  • Calculation of Tax Amount in FB60

    Hi Guru's,
    Here Tax Procedure is TAXINN in which I have maintain Tax Code V9 as 14.42% (EXCISE+CESS) + 12.5% (VAT) in FV11. So while doing MIRO I select V9 Tax code then automatically Tax amount is calculated.
    My question is can same can done in FB60. Means can Tax amount can automatically calculated in FB60 when I selecting V9 as Tax Code which was calculated in MIRO.
    I needed for transaction without Purchase Order.
    Right answer will be rewarded.
    Regards
    Amit

    Thnks for reply.
    I have already done the customization in OB40 but when i do invoice posting in FB60 then error shows "Tax Code V9 does not exist in TAXINN".
    But since in MIRO same Tax code get posted with same vendor.
    Pls help me.
    Regards

  • Wrong calculation of Tax in miro

    Hi Experts,
    While positing MIRO i am facing the following error.
    The issue now is i maintained a Tax code in FTXP with 10% in IN:A/P LST and tick the Tax calculator in MIRO the tax is calculated with 30%.
    Eg: Invoice amount is 10000 for which tax is 10% then tax amount should be 1000 but it displaying as 3000.
    Inputs please.
    Regards,
    Nani.

    hi,
    plz check in FV12, what is the record maintained there.
    regards
    jash
    Edited by: diptasya jash on Apr 30, 2009 9:25 AM

  • Disable auto-calculation of tax amount by Autoinvoices to import AR Invoice

    Hi all,
    I am using ra_interface_lines_all to do AR Invoices conversion to Oracle R12. My legacy invoices data contains tax amount and some of the invoices do not have any tax. Autoinvoice auto-calculated tax information during import even for those invoices that have no tax.
    I checked my AR interface record and made sure none of the tax-related columns (e.g. tax_code, tax_amount, etc) are populated. I also checked the AR transaction source for conversion and make sure tax-calculation flag is not set.
    Basically I need to set the tax amounts manually instead of letting the system to derive it. Some suggested to set tax_exempt_flag to "E". I tried but Autoinvoice complained that I need to have tax reason and besides I have many invoices that have tax amounts.
    Any suggestions on disable the auto-calculation of tax?
    Thanks! Mike

    Hi Mike,
    U r using transaction types to generate your distributions, right?
    Try to insert distribution info for each of your invoices in the table ra_interface_distributions_all, specifying REC, REV and TAX (tax where applicable) lines.
    Hope this will solve your prob.
    Vik

  • Reverse calculation of tax amount

    Hi Experts,
    Is it possible to calculate tax on reverse mode?
    I will enter the total invoice amount, the system will calculate the unit price  and  tax amount.
    How will it possible?
    Regards,
    Sanju M S

    closed...!

  • Wrong calculation of tax

    Hii
    The total tax is coming wrong and same is reflected in the pricing.Infact the calculation is proper but the total tax the system is picking is wrong.The system is calculating extra 100 rs.I dont know from where it is picking this 100 rs extra.Infact total tax=excise duties-discount.The system is calculating properly but the total tax is reflected wrongly in pricing procedure.This problem has to be addressed immediately.Can anybody help me out.
    Regards
    subhash kulkarni

    dear indranil
    Suppose my base value is 100 rs .total excise duties(BEDAED) - discount on taxes = total PO taxes. for e.g  500 rs (total excise duties base value)) - 100 (discount on taxes) = 400 rs (Taxes on PO). The system is calculating properly the calculation but on the header level the system is adding extra 100 rs for all tax codes i.e Net = 100 rs and Tax = 500 rs instead of 400 rs(Taxes on PO) and same amount is reflected in pricing for JEXS (Total PO value) = 500 rs instead of 400 rs which is wrong.The value of JEXS (Total PO value) must be 400 rs. I hope u get me what i m trying to explain.
    Regards
    subhash kulkarni

  • Secondary Higher Education Cess is not calculated in Tax Amount in MIRO

    Hi,
    I am facing a problem with SHECess which is implemented in recent budget changes in INDIA through SAP Notes.My problem is that when I made PO all duties and other taxes are calculated  and showing correctly in PO as well as in Print Preview in PO.
    But when I am trying to post the MIRO the system is not taking in to account the SHECess and also SHECess on CST.I checked several times but the results is the same.This is happening only for Depot Purchases for goods procured locally.
    Plz help me if any one encounters this situation and give me the solution as early as possible becz it is utmost very urgent.

    Hi,
    Check condition type for Secondary education cess is there  in following path where you specify which condition type is used for which sort of tax, if not add with tax procedure
    SPRO --> Logistics general > tax on Goods Movements> India >  Classify Condition>Condition-Based Excise Determination Types
    Also check TAX Procedure in t.code: OBYZ  & see condition type for Secondary education cess is there   with all condition types and all are placed with a logic to calculate taxes with total price.
    Regards,
    Biju K

  • Updation of tax amount via FM IDOC_INBOUND_SINGLE

    Hi All,
    I am having a requirement in which I am using a custom function module to create and post an IDOC. The program is taking data from flat file and passing it to the function module IDOC_INBOUND_SINGLE which calls a BAPI BAPI_ACC_INVOICE_RECEIPT_POST to post the IDOC.
    For posting IDOCS, IDOC type ACC_INVOICE_RECEIPT03 is being used.
    The IDOC, if posted successfully update data in BSET table. But the posting is not updating the 'Tax in local currency' (HWSTE) field in BSAT table.
    It seems it is not calculating the Tax amount.
    I am passing the tax code and the total amount to the IDOC. I wanted to know whether the FM IDOC_INBOUND_SINGLE internally calculate the tax amount (Tax code gives the tax percentage and the total amount is being passed by me)
    Also in the IDOC type ACC_INVOICE_RECEIPT03 there is no segment in which there is a field for Tax amount to be passed.
    Please help me as to how the tax amount will reflect in the BSAT table.
    Thanks in advance.
    regards,
    gaurav

    that is really weird! You can try one more thing.. See if you can create more than one Address with subty 1 ie infotype 0006 subty 1 for an employee in PA30. If the system allows it, the problem is not with the BAPI..but with the Time Constraints..
    Regards,
    Suresh Datti

  • Overrite tax amount

    hi,
    in F-02, by default, calculation of tax amount base on gross. we not able to change the tax amount to other amount.
    if we flag calculation tax base on net amount, then we able to overrite the tax code tax amount.
    may i know if this is fixed already? is there a way to change the tax amount manually when it is based on gross amount?
    thanks

    This is an set-up error in your system and no SAP system error!!!
    TC Spro
    Financial Accounting / Financial Accounting Global Settings /  Company Code / Enter Global Parameters
    Look to the field Tax base is net value:
    If you click on help you get the following help text:
    Indicator: Base amount for tax is net of discount ?
    Indicator that causes the base amount for the calculation of sales tax to be reduced by the discount share.
    Dependencies
    The rule used to determine the base amount for the calculation of sales tax is subject to the relevant country legislation. Either the company code table or the jurisdiction code table is used for control purposes.
    If the jurisdiction code is used for tax calculation, the entries in the company code table are not valid. Control then takes place at the highest level of the definition of the jurisdiction code. This method of tax calculation is used in America, for example.
    Example
    In Great Britain, the base amount for sales tax is the invoice amount less the agreed discount.
    Note
    If the tax base amount is net, the net value also has to be chosen as the discount base.
    Exception: If tax is calculated using the jurisdiction code (USA), the combination 'Net tax base' and 'Gross discount base' is also permitted, however, no tax adjustment is made for payment with a discount deduction.
    Example
    In the following an example is given for each possible combination. In each case, the material value is 100.00, the possible discount percentage 3.00 %, and the tax percentage 10.00 %.
    1) Gross tax base, Gross discount base
       Tax base 100.00       ==> Tax amount   10.00
       Possible discount amount (3.00 % of 110.00)   3.30
       Invoice amount 110.00
    2) Gross tax base, Net discount base
       Tax base 100.00       ==> Tax amount   10.00
       Possible discount amount (3.00 % of 100.00)   3.00
       Invoice amount 110.00
    3) Net tax base,  Net discount base
       Tax base  97.00       ==> Tax amount    9.70
       (Tax base = Value of goods - Possible discount = 100.00 - 3.00)
       Possible discount amount (3.00 % of 100.00)   3.00

  • Tax amounts calculating wrong

    Dear Experts,
    I am using tax code (ZS) with 10%, 2% and 1%.
    when i am posting FB60 by using this tax code its calculating tax amounts wrongly.
    For example i am posting Rs.20000/-
    when system has to calculate..
    Vendor Cr                         20,000/-
    Expense Dr                      17,940/-
    Sevice tax On OH Dr          2,000/-
    ECS on OH   Dr                     40/-
    SEC on OH   Dr                     20/-
    But Systm Calculating like below..
    Vendor Cr                         20,000.00
    Expense Dr                      18,132.37
    Sevice tax On OH               1,813.24
    ECS on OH                             36.26
    SEC on OH                            18.13
    Plese help on this issue...

    Dear Anil
    Kindly note that Tax will always be created on Amount Exclusive of Tax. Let me explain with an example.
    The form of invoice would be in the following form :
    Expense of Service Recd                      20000 (Excl of Tax)
    Add : Serv Tax @10%                            2000
    Add : Ecess & SHCess                             60
    Total Invoice Amt.                                22060 (Incl of Tax)
    Thus if you enter Against Expense 20000 as net invoice amount  in FB60
    then following entry will be generated :
    Exp .....                               Dr.  20000
    Serv Tax                              Dr.    2000
    Ecess & SHcess                  Dr.      60
    To     Vendor                              22060
    But if you choose Expense 20000 as gross amount invoice in FB60
    Exp .....                               Dr.  18,132.37
    Serv Tax                              Dr.   1,813.24
    Ecess & SHcess                  Dr.      54.39
    To     Vendor                              20,000.00
    Hope it provide you better picture about Tax Calculation

  • Miro service tax amount is calculating wrongly for particular materials for import PO

    Dear All,
    I have created import PO with three vendors like foreign vendor, customs duty vendor & Clearing Agent vendor.
    After creating PO with all conditions the PO is posted and MIGO is done.
    While doing MIRO there is no problem for foreign vendor and customs duty vendor (there is no service tax applicable for both)
    While doing MIRO for Clearing agent vendor, we have to calculate service tax for 12.36 %.
    The service tax is properly maintained in the system and its calculating correctly for all other PO's except this PO.
    This particular PO has 32 materials.the values are flowing correctly from PO to MIRO but while calculating service  tax the tax value is higher than the exact value.
    When we do MIRO for same clearing agent with different material the service tax is calculating correctly. But if we use particular materials  with same clearing agent vendor the tax amount is not calculating correctly
    For example:
    for Item 10
    The value is 1062.72 & 12.36 to be calculated on this value.
    The actual tax value is 131.35 but in MIRO its showing as 171.90. The same problem is happening with all other 31 materials.
    The Info record is not maintained for all the materials. On what basis should we check for the above issue. Kindly help with your valuable inputs.
    Kindly refer the screenshot.
    Thanks & Regards
    Subbu

    Hi Ajith,
    Please find the screenshot below
    But for same vendor with different material in another PO the tax is calculating correctly
    9050* 12.36 = 1118. 58
    For this the tax is exactly calculating as 1118.58
    Regards
    Subbu.

  • Wrong calculation of Income Tax

    Hi Experts,
    We found some calculation error in SAP while calculating income tax
    for this f.y. 2010-11. We had entered Rs. 1,03,462.00 in infotype
    u201C586u201D for employee code u201C xxxx u201C . As per rule under section 80C
    maximum exempted amount is Rs.1,00,000/-, apart from this Rs.20,000/-
    will be exempted under the head u201C Infrastructure Bond u201C. When we
    process the payroll for the employee the system is calculating a sum
    of Rs. 1,12,822/- as tax exempted under chapter VI. System is
    considering the P.F. Contribution of the employee additionally.
    Can anyone guide me to solve the issue
    Nasim

    Solved by myself

  • Wrong tax amount in MIRO

    Dear All
    Scenario is explained as below :-
    Whenever there will be service tax on software in my PO VAT No Deductable will be calculated on Net Price + Service tax on Software in other case VAT wil be calculated on Net Price only.
    ZSER - Condition type for Service tax on Software
    ZVRO - VAT Non Deducatble (Copied from JVRO).
    I have made changes in tax procedure TAXINN such that ZVRO in calculated on Net Price and Service tax on S/w i.e. ZSER.
    I made a PO with net price 290 INR and used condition type [email protected]% and ZVRO@5%. In PO ZSER is  29.87 INR  and ZVRO is 15.99 INR whic is correct but at the time of MIRO, when I tick on calculate tax,tax is appearing as 14.50 INR.
    I think VAT is getting calculated on 290 INR i.e. 5% of 290 INR = 14.50 INR.
    Please suggest how to get correct tax amount in MIRO.
    Regards
    SK

    Dear SK,
    Materials Management -> Purchasing -> Conditions -> Define Price Determination Process ->Define Calculation Schema
    goto  Procedure and check the control data. how you made the calculation of VAT.
    If the Calculation is OK in PO than it should be right in MIRO.
    Regards,
    PK.

Maybe you are looking for