Wrong Modified Times On Remote Server MAC

Hello,
One of our graphics designers that updates our website has an issue with her Dreamweaver CS3 for MAC, that when she refreshes a newly uploaded file, the file will show an 8hr difference in the modified column. I tested this by creating a new file on her local machine and checked its created/modified time which matched the Mac's time correctly. I then uploaded the file to a random folder on the live server which by the way is on our local network. At first in Dreamweaver, the remote server shows the modified column correctly but as soon as I click refresh the newly uploaded file shows 8 hours ahead. I know this is a Dreamweaver issue cause I checked out the servers time which was our local time zone and I also connected to the live server via Filezilla and not via Dreamweaver’s FTP which shows the create modified time on it correctly. So local machine is ok, remote server in same time zone is ok, viewing remote website files via Filezilla ok, viewing the remote server via Dreamweaver wrong. Remote site is running Linux and Apache.
Thanks,
Myronl

I have this problem all the time too. It drives me crazy because I share updates with one other person and constantly get the message "there is a newer file on the remote server" which 99% is due either to the time difference - and I don't know how to adjust for this in Dreamweaver - or this bug. But I always have to cover myself by creating backups and downloading the file in case she actually uploaded a new file. And no I don't use "check in" which is a real pain. So this is all a real waste of time.
Thanks!

Similar Messages

How do I copy and paste files from a windows remote server to my mac?

How can i copy and paste files from a remote server (windows) to my mac? i have installed cord to connect to the server but now i can´t cpy the files to my mac!

Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908)

Using scp to copy files from remote server to mac from a newbie

Hi am a new poster to this forum and getting (re)acquainted with the unix world using terminal on the Mac. I am part of webteam for a large website run by a nonprofit where I have administrative access. I hope that this forum is the correct venue for my question.
The other day I used terminal tsch to logg onto a remote server where I have admin privaleges. One of the other admins and I were in the process of experimenting with using either rsync or scp to "backup" the server. We are experimenting with different backup strategies over and above those supplied by our web host. After finding out how to open port 22 on my modem and setting services in sharing to allow for remote log on, I logged on to the remote server and ran this command (suggested by another admin):
scp -r -p -v /remotefolder [email protected]:/Users/drktyler/Documents/serverBU/
Unfortunately I had severely underestimated the amount of time it would take to perform scp and needed to terminate the scp job. For example, I only got 100 MB onto my Mac in one hour (normally takes about 6 mintues to download a 100 MB file from the internet) I tried to kill the job by doing:
ctrl -z
ls ps
kill (scp pid #)
This did not work. And I forgot about trying ctrl-c <blush>
I was able to exit my session on the remote server which "exited" the scp job.
Oh, before running scp, I did try rsync and it did not work. Unfortunately, I had not set my terminal session to an unlimited buffer size, so the early part of my session rolled off the terminal screen. This means I have no idea what the error was.
This morning the other admin was performing some backups on the remote server and noticed that there was a an unexplained directory on the remote server named:
mymacuserid
It had what he called some rpms. I am not exactly sure what a rpms cache files are, but I think that rpms has some relatationship to the RPM package manager used by many linux systems. I could not account for how the mymacuserid directory got on the remote server because I did not put it there and my log in id to the remote server bears no resemblance to my Mac user id.
We don't believe that this directory did any harm to the remote server, but I sure as heck would like to know how it got there.
My question is if there was something about my scp command that
(1) created this "temporary" mymacuserid directory on the remote server
(2) did the way I ended the scp job by exiting the terminal mean that this temporary directory was not "cleaned up."?
(3) what other options might have been available to me to kill the job and clean up after the job? ctrl-c while logged onto the remote server? opening up a second terminal window and killing the ssh job?
(4) is scp normally that slow?
My Mac: Mac Mini, 1.66 GHz Intel Core Duo, Memory: 1.5 GB 667 MHz DDR2 SDRAM, Mac OS 10.4.8
Remote server: CPU AuthenticAMD, AMD Athlon(TM) XP 2600+
Version psa v8.1.1_build81070716.12 os_CentOS 4.2
OS Linux 2.6.9-55.0.2.EL {CentOS is built from Red Hat Enterprise Linux}
Respectfully yours,
treehugger from nj

J.V. Thanks so much for your very helpful response!
The other admin who was trying scp over the weekend also reported that the job ran very slowly, so I suspect the slow response time may be on the remote server end. I do appreciate knowing that you have gotten 80% of your advertised DSL speed with scp.
Thank-you for being so polite and gentle in your response. No I did not know that if the remote patname has white space in it, that I need to quote the whole path and escape any white space with preceding backslashes as you showed in your rsync example.
Finally, as for the rogue elements being left on the server, I figured out that these rogue elements were left on the server the day before I did the aborted scp job because I had to quit the terminal in the middle of an active rsync job while logged onto the remote terminal. When I went onto the server this morning, I checked the timestamps on the rogue files and the timestamps match up.
The other admin has finally succeeded in doing a full server back-up (in addition to the back-up using the back-up utility provided by our web host). So, for the moment we are in pretty good shape. Of course, I'm not sure that I could replicate what he did. <shrug>
Thanks again. I'm glad I posted on this forum as I have always learned a lot by reading the apple forums I suspect that I will be posting again.
T.H.
P.S. Please forgive me for not including copies of your original message in my reply. There is probably a setting that I need to change.

Can not determine remote server time.

Can not determine remote server time.
Why isn't this fixed in a ******* patch already? I am on a
lot of machines, in various locations. I am not going to flippin
modify DW with a flippin hex editor every where I go.
Do I really need to spend billable time on hold with front
line techs at hosting companies?
What's the deal?
This should so not be a problem.

> Why isn't this fixed in a ******* patch already?
There's no evidence that it's DW that is at fault. What is
your firewall?
Where is your server? Is this true on ALL your sites hosted
on that server?
Do you have sites hosted on other servers?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"M.E. Again" <[email protected]> wrote in
message
news:fdlvt4$6tm$[email protected]..
> Can not determine remote server time.
>
> Why isn't this fixed in a ******* patch already? I am on
a lot of
> machines, in
> various locations. I am not going to flippin modify DW
with a flippin hex
> editor every where I go.
>
> Do I really need to spend billable time on hold with
front line techs at
> hosting companies?
>
> What's the deal?
>
> This should so not be a problem.
>

When saving file to remote server it saves to wrong site

I'm frustrated try to save a file to the remote server. I
connect to the server OK. Then I open an html document, make my
changes and save it. But instead of saving it where the file came
from it connects to a different on of my sites. Ack!! Even when I
try to "save as" it will connect to the one I want and then connect
to wrong one to upload the file.

have you checked your site definition to make sure you have
the correct
site specified in the remote info?
cntrysigns wrote:
>
> I'm frustrated try to save a file to the remote server.
I connect to the
> server OK. Then I open an html document, make my changes
and save it. But
> instead of saving it where the file came from it
connects to a different on of
> my sites. Ack!! Even when I try to "save as" it will
connect to the one I want
> and then connect to wrong one to upload the file.
>

My final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

Time Capsule- does it or NOT work as remote server? Not seeing benefits I was sold by the salesperson.

Hi! I'm hoping you can help eliminate my frustrations....
I purchased a macbook pro 13 inch because my other macbook 2009 was already low on memory and I thought it best to upgrade. I needed more space but wanted also the ability to access remotely and not worry about computer being stolen with all the information on it because I travel A LOT.
I asked the salesperson if I purchased the 128g MBP and the time capsule would i be able to access all my information remotely? The thought process was:
1. With over 500GB already in my previous MB i would transfer all that information from the old MBP to the time capsule where it would be at home safe
2. set up the time capsule to access all files remotely (including iphoto, itunes, videos, etc)
Because my information already was over 500Gb, buying the 2TB was going to be plenty of space. So I went with purchasing the MBP with lower space (128G) + the 2TB Time Capsule.
Now I'm trying to set everything up, was on the phone for 2.5 hours, spoke to 5 reps and finally received an answer: CAN'T DO IT. DOESN'T WORK THAT WAY.
I kept searching online and see that
1. the Time Capsule can only be used as a time machine for backups. Can't use as a remote server but others say you set up a server file and works.
2. I can't place the iphoto library or itunes library there to access remotely because I risk it being corrupted (sales person said it would run slow but worked well)
SO, the big question...can SOMEONE please help me determine if this was worth the $350 purchase because right now it feels like i'm better off sticking with my external drive from WD that i have been working with. I'm seeing ZERO value add for this device....
PLEASE...if someone knows if i can really get it to work for what I need, I would truly appreciate your advice because right now FRUSTRATION is at it's max...especially after 2.5 hours on the phone with little to no solutions.

Some of this depends on your home internet speed.. do you have a fancy 1Gbit link.. with 100Mbps uplink.. well that is faster than rest of the internet.. so you can well support some sort of home cloud device.
I would also strongly recommend business level internet accounts with static Public IP address.. not dynamic.
For most people with limited upload speed.. 1mbit is standard where I live.. and real throughput is 800Kbps. Forget it.
I would never advise anyone to depend on remote access.. for anything with 1Mbps upload.. and even 5Mbps is going to be a struggle.. Maybe 10 or 25Mbps you can function.
It is simply not the right way to do things. You are far better off carrying around a 500GB thunderbolt drive.. which weighs next to nothing and is as fast as the internal drive.. or use a standard cheap 2.5" USB hard disk which you can get up to 2TB now.
Backup to TC but not by Time Machine.. or backup to the cloud.. for sure..
You can also access some files in the cloud. That is much better than using a TC at home.. where you then have a domestic quality link to the internet.
Apple specifically say not to use iphoto on network drives.. that means any network setup.
iTunes you can use from a network drive.. but if you have a massive library and slow upload speed it will never finish loading.
The internet for the most part is just not there yet.. maybe another 20years. In Australia that will be 100years with the current bunch of Philistines running the place. And if you do international travel and depend on networks in hotels or cafes.. well forget it.. they are going to give you enough bandwidth to load your email as long as it is pure text.
Apple have a 2week return period.. just take it back if you are unhappy with it.

To upload the time data from a remote server into R/3 2011 infotype

hi all,
i have been given a task to upload the time data of the employees into the 2011 infotype from a remote time recording server, can this problem be solved with the help of a rfc which will run on that remote server, please guide me how to approach this problem.
thanks & regards,
santosh.

Hi Santosh,
You can use ALE for this. The message type is HRSM_D for upload of time data.
Reward if useful.
Regards,
Senthil

"Failed to open package file ..." when modifying job step on remote server

I have SSIS package setup on a remote SQL Server to run on schedule via SQL Server Agent. It was setup initially by remote desktop-ing to the server and connecting to it via SSMS running on the same machine where SQL Server is running. Package source is
"File System" and absolute path is specified (D:\Folder1\Package1.dtsx). There is just one step in the job - to run SSIS package. Everything works as it should.
Now I want to modify this job - change number of retry on failure attempts. I can successfully connect to this SQL Server instance via SSMS from my developer workstation. I can then go to "Advanced Settings" for this job step and change "Retry attempts"
to some other number. However, when I press "OK" I get this error message:
TITLE: SSIS Execution Properties
Failed to open package file "D:\Folder1\Package1.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can
be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
({105912C7-6345-42B4-99B4-58566291867B})
ADDITIONAL INFORMATION:
Failed to open package file "D:\Folder1\Package1.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can
be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
({105912C7-6345-42B4-99B4-58566291867B})
Interestingly enough, in spite of this error message the number of retries is successfully changed.
I understand it happens because SSMS tries to locate package on my local hard drive and the same folder doesn't exist on my development PC. It still doesn't make sense to me. Does SSMS not know I am accessing remote server? How come I don't get any errors
when I just execute this job via SSMS when SSMS runs on my development PC?

Hi, Am facing same issue, but I am trying run SSIS package via C# code, I have given full access to all the folder in which the package is available.
In the below line am getting error,
using Microsoft.SqlServer.DTS.Runtime;
Application app=new Application();
Package package=null;
package=app.LoadPackage("PackageFullPath",null) --error line
Failed to open package file "C:\SSIS\Package.dtsx" due to error 0x800C0006 "The system
cannot locate the object specified.". This occurs when loading a
package and the file cannot be opened or loaded correctly into the XML document
full access to which account? also trying to run from where? In the same machine where package resides?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Dreamweaver can't determine remote server time

I've got two websites that were working just fine last week.
Now I can connect to them, but I can't see the files/folders on the
remote server and I get the following error: "Dreamweaver can't
determine remote server time". Can anyone tell me how to fix this?

Any recent changes to your firewall or network environment?
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_14834
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"SaraML" <[email protected]> wrote in
message
news:fndp03$d6k$[email protected]..
> I've got two websites that were working just fine last
week. Now I can
> connect
> to them, but I can't see the files/folders on the remote
server and I get
> the
> following error: "Dreamweaver can't determine remote
server time". Can
> anyone
> tell me how to fix this?
>
>

Time Capsule remotely using Back To My Mac with iPhone.

I'm connecting my Time Capsule remotely using iCloud - Back To My Mac. It's possible to make the same connection using my iPad 2 or my iPhone?

What is the exact model of your modem?
Do you use pppoe authentication in the modem.. If so you can just bridge it and use pppoe in the TC without any issues.
Apple cannot be expected to fix every modem and every ISP out there. Unfortunately networking is done is so many ways that it is impossible.. the ISP is actually the one who should help but they generally are useless.. or want you to pay for support.
Yes, send pics of the configuration.
Are you getting a public IP from your ISP? If not then none of this will work.
How are you testing access? You cannot test from inside the LAN .. you must use a Mac computer from internet access that is not firewalled.
Remember this is a two way street.. both ends have to have full access.
If the BTMM approaches doesn't work do try it manually..
There is clear instructions on the web to setup access.
See http://gigaom.com/2009/05/14/access-your-time-capsule-over-the-internet/
You don't need to do the fancy scripting.. just setup your modem router to forward port 548 to the TC.
You don't give wan access in this case... you are accessing on LAN.
But you do need to use some more security than normal TC password.. ie use disk password.
This is proof of concept.. if this works then BTMM should work if you get all the settings right.

Connecting to remote server failed - WinRM client cannot complete the operation within the time specified

Exchange 2010 SP2 Active DAG Node. Cannot cannot to Exchange Admin Console with the following errors and these errors change from time to time ... and some times it works ...
attempt to connect to http://DAGNODE.domain.com/powershell using "kerberos" authentication failed: connecting to remote server failed with the following message: The WinRM Client cannot complete the operation
within the time specified. Check if the machine name is valid and is reachable over the network and firewall exception for windows remote management service is enabled.
thanks,

Hi,Philip,
Are you running the DAG on Windows server 2008 R2?If so check the following KB to see if they apply to your issue
http://support.microsoft.com/kb/976839
http://support.microsoft.com/kb/2294243
And you can check if the solutions in these old threads with similar error message do the trick for you.
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/54af902c-d718-4656-8a25-7c150e4b0e81/
http://social.technet.microsoft.com/Forums/en-US/exchangesvradminlegacy/thread/baa1af25-001a-432d-86a0-25c05655e63c/
Regards,
Sharon
Sharon Shen
TechNet Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question.

Remote Server returned '550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found'

Hi all,
having the following issue that started today,everything been working fine until now.
When Office 365 users send e-mail to some on premise users they get the following error in Return.
Remote
Server returned '550 5.1.1 RESOLVER.ADR.ExRecipNotFound; not found'
On premis users (Exchange 2013) can send to the same contact just fine.So for 365 users that failed we have tested the following:
Using OWA,says recepient cannot be found.
All 365 users fails to same recepients,for now a dosen People.
Address that fail,mailboxes are spread accross different databases.
Cannot see any error in event Viewer related to this.
Any tips?
thanks!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Hi Ed,
thanks for reply and sorry for late reply,been alot to do lately With lots if migrations and errors.
YEs you are correct that the problem is caused by useraccount was in wrong OU and was not sync to the "Cloud".
Move users Object to correct OU and all was working fine.Strange this is that it have worked before,so does it mean that if user is not in the OU defined to synced,it will be removed from the cloud?
Br
Ill put it as resolved :)
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Off2work

Upgrade to Windows 8.1 Pro from Windows 8 Pro causing issues with Remote Server Administration Tools

Last night I received the Windows 8.1 update and it has caused Remote Server Administration Tools to stop working. I tried to reinstall the tools using Windows8.1-KB2693643-x64.msu but get the following error:
Windows Update Standalone Installer
Installer encountered an error: 0x8007000d
The data is invalid.
In the event log I have the following error
Windows update could not be installed because of error 2147942413 "The data is invalid." (Command line: ""C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu" ")
System
Provider
[ Name]
Microsoft-Windows-WUSA
[ Guid]
{09608C12-C1DA-4104-A6FE-B959CF57560A}
EventID
3
Version
0
Level
2
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-11-05T12:14:18.035865000Z
EventRecordID
1562
Correlation
Execution
[ ProcessID]
5224
[ ThreadID]
5132
Channel
Setup
Computer
removed
Security
[ UserID]
S-1-5-21-1644491937-764733703-854245398-1794
EventData
UpdateTitle
ErrorCode
2147942413
ErrorString
The data is invalid.
CommandLine
"C:\WINDOWS\system32\wusa.exe" "C:\RSAT\Windows8.1-KB2693643-x64.msu"
I did have the Remote Server Administration Tools installed previously when I was running windows 8 pro and everything was fine. I've tried to remove the older version but according to the below it isn't even installed and Remote Server Administration
Tools doesn't appear in Turn Windows features on or off.
c:\RSAT>dism /online /Get-Packages
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Image Version: 6.3.9600.17031
Packages listing:
Package Identity : Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~amd64~en-US~6.3.9600.16384
State : Installed
Release Type : Language Pack
Install Time : 24/09/2014 06:33
Package Identity : Microsoft-Windows-Embedded-EmbeddedLockdown-Package-TopLevel~31bf3856ad364e35~amd64~~7.3.9600.17116
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.3.9600.16384
State : Installed
Release Type : Foundation
Install Time : 22/08/2013 14:46
Package Identity : Package_for_KB2891214~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2902816~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 05/11/2014 01:39
Package Identity : Package_for_KB2919355~31bf3856ad364e35~amd64~~6.3.1.14
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2920189~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931358~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2931366~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2932046~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2934018~31bf3856ad364e35~amd64~~6.3.1.5
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937220~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2937592~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938439~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Feature Pack
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2938772~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939153~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2939576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2949621~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Hotfix
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2950153~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2954879~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2955164~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2956575~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958262~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2958263~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959626~31bf3856ad364e35~amd64~~6.3.3.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2959977~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2961072~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962140~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2962872~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2964718~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965142~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2965500~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966407~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2966870~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2967162~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2968296~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2968599~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2969817~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971203~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2971850~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2972103~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2972280~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973201~31bf3856ad364e35~amd64~~6.3.1.3
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2973351~31bf3856ad364e35~amd64~~6.3.2.0
State : Installed
Release Type : Security Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2974008~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2975061~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 07:11
Package Identity : Package_for_KB2975719~31bf3856ad364e35~amd64~~6.3.1.8
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2976978~31bf3856ad364e35~amd64~~6.3.2.1
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2977292~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2978041~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979573~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979576~31bf3856ad364e35~amd64~~6.3.1.1
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2979582~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2980654~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2987107~31bf3856ad364e35~amd64~~6.3.1.4
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2989542~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB2990532~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2993651~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Update
Install Time : 24/09/2014 10:03
Package Identity : Package_for_KB2998174~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000061~31bf3856ad364e35~amd64~~6.3.1.2
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000869~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Security Update
Install Time : 04/11/2014 17:56
Package Identity : Package_for_KB3000988~31bf3856ad364e35~amd64~~6.3.1.0
State : Installed
Release Type : Update
Install Time : 04/11/2014 17:56
The operation completed successfully.
Any help on this issue would be appreciated, if you need any further information please let me know.
Thanks

SeniorInternet,
I’ve seen this issue in the past and it occurred because the file was corrupted.
It’s possible that something went wrong when downloading it originally on your newly upgraded machine.
Try downloading
KB2693643 again from another machine and install it.
Hope this helps!
Mike
Windows Outreach Team – IT Pro
Windows for IT Pros on TechNet

SSRS 2012 with SharePoint 2010: Unable to connect to the remote server

We had originally installed SSRS 2012 with SP 2010 and I did not like how the installation was configured, so we uninstalled everything and removed the SSRS server from the SharePoint farm and uninstalled all the SQL bits (SSRS was deployed to web tier in
sharepoint mode).
I've since added a new application server to host the SSRS SharePoint Mode and Installed the reporting services add-in on the WFE. For reference, I have 1 WFE and 2 App Servers. the WFE has the Reporting Service Add-in and both App Servers have
the SharePoint mode of SSRS installed as described here: https://msdn.microsoft.com/en-us/library/hh479774(v=sql.110).aspx
I've also installed the Service Application and all seems to work well up until I make an attempt to create a report or data source on the WFE.
It looks like somewhere, the WFE is still looking to connect to the original SSRS machine we installed. I've gone through registry, config files and the SharePoint config database to see if I can see where the reference value is. Still can't
find it anywhere. None of the Reporting commandlets are helping.
Technically what is occurring;
Add Reporting service content types and create a New Reporting Data Source through UI
ULS Logs go after the url: /_layouts/ReportServer/NewSharedDataSource.rsds
Exception occurs after some time because it times out trying to connect to wrong host. Exception below:
Exception encountered for SOAP method GetSystemProperties: System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond <WRONG HOST IP>:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception) -
-- End of inner exception stack trace ---
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SetConnectionProtocol()
at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
No powershell commands or any of the settings in the service application allow me to set this. Any help would be appreciated.
20 Bay Windows Home Server (Not Vail!)
http://piroozjavan.blogspot.com/

Issue an iisreset on the WFE, and validate that SSRS Service is running on the App servers.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Wrong Modified Times On Remote Server MAC

Similar Messages

Maybe you are looking for