Wrong values for Total stock - Inventory managment ( negative values)

Hi,
I loaded inventory management load
2LIS_03_BF INIT 01.06.2009 - 06.7.2009 No Marker Update (compressed with check)
2LIS_03_UM INIT 01.06.2009 - 06.7.2009 No Marker Update (compressed with check)
the first quantity received is from 11.06.2009 and 0RECTOTSTCK is showing 300 which is correct.
on 10.06.2009 it is showing -300 for 0TOTALSTCK when it should be 0 since there hasn't been any data.
whats the right way to compress my cube if I don't want to load BX and how can I resolve this.
thanks

Hi,
The standard process to get correct values in report is
1. First u have to do init laod from 2LIS_03_BX and u have to compress the request with 'no marker update' chk box unselected.
2. Next u have to do init load from 2LIS_03_BF and u have to compress the request with 'no marker update' chk box selected.
3. Next u have to do init load from 2LIS_03_UM and u have to compress the request with 'no marker update' chk box selected.
4. Normally u can run delta loads from BX and BF data sources. ( Compression is not mandatory. Even if u compress it will improve the performance)
Regards,
Thilak

Similar Messages

Inventory Management Negative Values

Hello Experts -
I'm working on an inventory management report and we're in BI 7.0.
In the report, the valuated stock quantity is a non-cumulative key figure with inflow as receipt stock qty and outflow as issue stock qty.
In my transformation, I'm taking care of the process keys and multiplying by -1 when the keys are 100, 101, 104, 105, 106, 110. I'm doing that for qty as well as for $ figures.
But when I look into valuated stock qty in my report, I'm seeing negative values for movement type 602 which is a return. Earlier this was a positive value.
For movement type 601 which is a sales, I'm seeing positive values which used to be a negative value.
Basically, the figures got reversed even though I'm multiplying by -1 only on one set of process keys such as 100, 101, 104, 105, 106, 110.
Is it ok to have negative figures when dealing with movement types?
Any help would be greatly appreciated.
As always, points will be granted.
Thanks!

Hi,
Check these threads.
Negative Val Stock
Inventory Report with negative stock
Regards.

Issue with Negative Value for Total valuated stock 0VALSTCKQTY.

Hi Experts,
we loaded the Cube with datasources 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM.
We mapped the quanity field from 2LIS_03_BF in transformation either into Key figures "Quantity issued from valuated stock" (0ISSVALSTCK) or "Quantity received into valuated stock" (0RECVALSTCK ) of the cube.
For obtaining the Total Valuated stock, we used the Key figure 0VALSTCKQTY. This key figure is having the Inflow and Out flow values as 0RECVALSTCK and 0ISSVALSTCK. When i tried to check the content of 0VALSTCKQTY, the key figure 0VALSTCKQTY is not present in the infoCube content. I understood that the value for this key figure would be calculated at the time of query execution with the formula
{ Last obtained Valuated stock + (Received Valuated Stock u2013 Issued Valuated Stock ) }.
The issue is the first records in the query is obtained with negative value for the total valuated stock 0VALSTCKQTY even though the values of Received Valuated Stock and Issued Valuated Stock are with Zero. Could any one please help me on how the first record in the query is with a negative value eventhough the inflow and out flow fields of it are with Zero.
Many Thanks in advance.
Jeswanth

Hi Srini,
I observed an interresting reason for the stock being with negative in the first record.
Issue : While executing the BEx report, we have the first record with a negative value.
Let me explain with an example
Material : XYZ
Plant      : A
Date of Stock Initialization for data source 2LIS_03_BX -
> 12th April 2009.
So on 12 Th April 2009 consider that we have a stock in store with a value of 2640.
Then we have loaded wih Data source 2LIS_03_BF for all Historic Movement types.
At the time of query execution we will have the first record with a negative of available stock present on the day of initialization .
So, as we have initilized the data source 2LIS_03_BX on 12 th April 2009, we have at that time a stock of 2640 in availability.
Exactly with the same value of 2640, we are having a negative value i.e. -2640.
and also one more point to be noted is ...as we have initialized the data source 2LIS_03_BX on 12 th APril 2009...it has created a
opening balance of 2640 on the day of initiailization i.e on 12 th April 2009 in infocube....(which is an extra record...)...so if the previous record of 12,04,2009 is having some value in it..then it will get added to 2640 EA..which will give incorrect stock
So in the query the records will appear in the below following manner
Calendar Day     Total stock                                                                Received stock                                          Issued Stock
28.12.2005 ---> - 2640 EA
29.12.2005 --->    2000 EA                                                                       640 EA                                                        0
10.04.2009 --->      0                                                                                0                                                               2000 EA
11.04.2009 -
>    0                                                                                0                                                                0
                             (For making
                              the earlier record of initilization to 0 a negative value -2640 EA is created in the first record )
12.04.2009 (Initializtion day) ---> 2640 EA                                                 0                                                                0
13.04.2009
the day before initialization the total stock will be 0 due to the negative effect introduced by the first record and from the day of initialization the records will be the accurate values... On 12 th april 2009 we can see that a stock of 2640 is brought into the total stock. In fact if there is no negative value i.e. -2640 in the first record then ...the value on 11.04.2009 will be 2640 Ea and this will get summed up with the Opening balance of 2640 EA created by 2LIS_03_BX on the day of intitialization. So on 12 .04. 2009 the total stock will be shown as 5280 EA...so in order to prevent the double value only we observed that the first record is created with the negative of available stock present on the initialization ...to make the record before the day of initialization i.e. 11.04.2009...to be 0...so that from 12 th April 2009 ..will start to see the actual total stock in the query result...
This is happening only if we use both the data sources 2LIS_03_BX and 2LIS_03_BF for loading into BW.....
If we load alone by 2LIS_03_BF ...then as 2LIS_03_BX is ruled out in the loading...then no negative of available stock will be created ...because there will be bno opening balance created on the day of initialization.....and the opeing balance available will be flowing into consecutive records due to the movement types and 12 th April 2009 will be shown with avaialable total stock of 2640 EA.
Kindly let us know your opinions on this...
Thanks.
regards,
Jeswanth

Non-cumulative Values not showing in Inventory Management Queries

Hi:
Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

Found the problem. It had to do with the compression variant in the delta process chain. The compression was set to 'no marker update'. Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up. Reinitalized and the deltas are working correctly now.

SCCM 2012 Reporting Code Returns Same Value For Total Number Of Required Updates Per Computer

I'm trying to make a custom report in SCCM 2012 R2 with SQL 2012 since Microsoft took out the ability to list the number of updates needed per computer. This was in WSUS reporting but is not in SCCM reporting. I've made a custom report for this but can't
quite get it to work. The report runs but the same value for total number of updates needed shows up for every computer. I took a query from one report and am trying to get it to run inside the select statement from another report. Here is the code as it is
right now:
declare @CI_ID int; select @CI_ID=CI_ID from fn_rbac_ConfigurationItems(@UserSIDs) where CIType_ID=9 and CI_UniqueID=@AuthListID
          declare @StateID int
          select @StateID=StateID from fn_rbac_StateNames(@UserSIDs) sn where sn.StateName=@StateName and TopicType=300
          declare @RequiredUpdateCount int
          select @RequiredUpdateCount=Count(v_StateNames.Statename) from
v_StateNames,
v_Update_ComplianceStatusAll
Inner Join v_R_System On (v_R_System.ResourceID = v_Update_ComplianceStatusAll.ResourceID)
Inner Join v_UpdateInfo On (v_UpdateInfo.CI_ID = v_Update_ComplianceStatusAll.CI_ID)
where
v_StateNames.TopicType = 500 and
v_StateNames.StateID = v_Update_ComplianceStatusAll.Status and
v_StateNames.Statename = 'Update is required'
Group By v_R_System.Name0
          select
            ccm.ResourceID,
            rs.Name0+isnull('.'+rs.Resource_Domain_or_Workgr0, '') as MachineName,
            rs.User_Domain0+'\'+User_Name0 as LastLoggedOnUser,
            asite.SMS_Assigned_Sites0 as AssignedSite,
            rs.Client_Version0 as ClientVersion,
@RequiredUpdateCount as RequiredUpdates
          from fn_rbac_ClientCollectionMembers(@UserSIDs) ccm
          join fn_rbac_Update_ComplianceStatusAll(@UserSIDs) cs on cs.CI_ID=@CI_ID and cs.ResourceID=ccm.ResourceID
            and (@StateID=0 and cs.Status=0 or @StateID=1 and cs.Status in (1,3) or @StateID=2 and cs.Status=2)
          join fn_rbac_R_System(@UserSIDs) rs on rs.ResourceID = ccm.ResourceID
          left join fn_rbac_RA_System_SMSAssignedSites(@UserSIDs) asite on asite.ResourceID = ccm.ResourceID
          where ccm.CollectionID=@CollID
          order by MachineName
Ben JohnsonWY

There's plenty wrong with it. It gives you no idea of how many patches each box needs. Then you have to click on each computer, click the sort arrow by the "required" column, and count the number needed. When you have hundreds of computers to work on this
is a big deal as it's very time consuming. What's great about the view in WSUS that had this is that it listed this for you and you could sort the required column. So if have most computers needing 2 patches, you can go find the one that needs 40 and 150 (to
over exaggerate) and put the time on them needed to see why they're so far behind. The WSUS format was quick, easy, and informative. SCCM makes getting this info a royal PITA which is why I'm (and many others) so royally peeved at MicroShaft for removing this
functionality, but that's what we've all come to expect from MicroShaft--just like when then took the nice colorful themes out of Office 2010 and replaced them in Office 2013 with just white, gray, and a darker gray. That's super boring and actually hurts
my eyes.
Ben JohnsonWY

Stock Ledger Report in Day Wise not giving correct values for Opening Stock

Dear Experts,
I m working on Sock ledger report to give the day wise data.
since yesterdays closing Stock will become opening stock of today,
To get Opening Stock,
I have restricted the stock key figure with 2 variables on calday
                              (DATE FROM var with <=(Lessthan or equal to) and offset -1
                               DATE TO      var with <=(Lessthan or equal to) and offset -1)
To get Closing Stock,
I have restricted the Stock key figure with 2 variables on calday
                              (DATE FROM var with <=(Lessthan or equal to)
                               DATE TO      var with <=(Lessthan or equal to) )
But in the output Opening stock values are not coming correctly and for given range of dates,
for last date, opening stock is showing as Zero.
Could you please tell me how can I achieve the correct values for opening stock.
Thanks in advance.

Hi Arjun,
Seems like you are making it more complicated. What is your selection screen criteria?
Ideally you should only use the offset.
You will have say Calday in rows and stock in Column
____________Opening Stock_____________Closing Stock
01/06/2009___(Closing stock of 31/05/2009)_(Stock of 01/06/2009)
02/06/2009___(Closing stock of 01/06/2009)_(Stock of 02/06/2009)
03/06/2009___(Closing stock of 02/06/2009)_(Stock of 03/06/2009)
So, from above scenario, create one RKFs and include Calday in it. Create a replacement path variable on calday and apply the offset as -1.
So, your Opening Stock will be calculated by closign stock of previous day.
- Danny

Default value for variable are not within permitted value range (precalc)

Hello BW community
Issue:
I have created a variable (Characteristic Value/ Manual input-default value) and use the precalculated value set (details-basic settings). In the further variable definition I could select the precalculated value set in 'Default values', which I have defined beforehand in the broadcaster..
The precalculated value set in the broadcaster settings is just based on a master data query on 0CUSTOMER.
Error:
The variable gets the error E991/R9E Errors: Default values for variable 'XXX' are not within permitted value range.
The detail description of the error is: You defined default values for variable 'Sold-to party precalc value set for manuel input' that are not appropriate for the variable type; for example, a range is defined as a default value for a variable that only permits a single value.
So please has someone had the same issue and found out how to solve it? It would be excelent to get good solution for this issue.
Best regards and thanks
Christian
PS-1: System BW 701 / SAPKW70105
PS-2 : there has been a SDN entry with the same topic but not resolved too.
link: /thread/980839 [original link is broken]

Hello,
Thanks for your response.
I should have mentioned that in my post. I tried this very first time. I thought that this is the place where you provide default value. But I got following exception at that time, so I thought, may be this is used for something else.
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
oracle.jbo.NameClashException: JBO-25001: Object viewAllInd of type Control Binding Definition already exists.
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)Do I need handle something else when you put the default value?
Thanks,
Jai

Need to see price for total stock value

gurus,,
please tell me how can i check total stock value price.
asap

you can check that in material master in accouting 1 view. You can check both stock and stock value in there.
Assign points if helpful

Credit note for invoice with item with negative value

Hi,
is it possible to create credit note for invoice, where in one line is negative value (its non stock item).
There exists 2 possibilities:
negative qty and positive price (its possible create only through SDK, not SBO)
positive price and negative qty
for example
itemcode 123
qty -1
price 1000
How to create credit note from this invoice?
Thanks a lot for hints.
Petr

Hello Petr Verner,
It's a standard functionality of Business one, that it is impossible to enter a negative amount in an independant credit note or in a credit note based on a invoice with negative amount.
To solve this issue:
1. For the rows with the positive Row Total, create an "independent" Credit Memo (not based on an Invoice).
2. For the rows with the negative Row Total, create another Invoice with a positive Row Total opposite to the original negative Row, and reconcile between the two rows manually via Banking => Bank Statements and Reconciliations => Reconciliation.
Hope the above helps.
Wilma Wang
SAP Business One Forums Team

Combined Report for Purchasing and Inventory Management.

Hi All,
Is there any standard SAP Report available where I can get all the information related to Purchasing and Inventory Management in one.
Like Material,Purchasing details of the material (vendor, price etc ) and Inventory Management (Stock qty and value etc.).
Regards,
kumar

I don't know any. We have one Z or if you want you can make a simple query.
Best regards.

Stock Posting List - Negative Value when Different Currency in PO

Hi experts,
We would like your help on the following scenario.
A Purchase Goods Receipt PO and a Purchase Invoice are added in SAP 9.0, on the same date, in a different currency from the system's currency; system's is Euro and Purchase documents are added in JPY (Japanese xen), i.e. 300 JPY. When checking the "Stock Posting List" report for a number of goods that were purchased with the above documents, the report presents the line of the Goods Receipt PO with the value of 270 JPY, and the line of the Purchase Invoice with a negative value, i.e.-15 Euro.
Has anyone faced the same issue?
Thank you in advance.
Kind Regards,
Vassilis Korolis

Both queries have the default value of "Only Posted Values for Navigation".
As I was looking at this, I did realize the following though.
Remember, I mentioned that my zcurrency_mand field has a Reference Characteristic of 0currency.
Query 1: The key figure that is being converted is tied to 0currency in the back end. (this is the query that works).
Query 2: The key figure that is being converted is tied to 0inv_curr in the back end.
Both of the currency conversions are using zcurrency_mand. Should query 2 be using a new variable similar to zcurrency_mand, but with a Reference Characteristic of 0inv_curr?
If the answer is yes, I tried creating ZINV_CURR_MAND with Reference Characteristic of 0inv_curr, but am getting the following error when I try to save the changes to Query 2
[E117(BRAIN)] Errors: Variable ZINV_CURR_MAND2 is not permitted for the target currency.
Thanks,
Jennifer

Characteristic values for a stock transfer Purchase Order

Hi Experts,
We are using material variant concept. I created stock transfer purchase order for a variant material. There i'm able to give characteristic values. How to extract that characteristic values into a report.
We are getting the characteristic values from Production order and sales order based on configuration object. I'm passing that configuration object through functional module, i'm getting the values.
Functional module : VC_I_GET_CONFIGURATION_IBASE
I tried with that functional module with configuration object value for stock transfer purchase order. I'm not getting the values. How to extract the characteristic values.
Please help me.
Thanks in advance.
Naren

Hi,
Assign document type of stock transport order to supplying plant and receiving plant in the path:
SPRO-> MM-> Purchasing->Purchase Order-->Setup Stock Transport Order -
> Assign Document Type, One-Step Procedure, Underdelivery Tolerance
Here assign STO document type to your supplying plant and receiving plant & save.
Now try doing PGI.
For more check the link:
http://www.scribd.com/doc/8985938/STO-Configuration-in-ERP-SAP-ECC-6-
Regards,
Biju K

No Output/Values for valuated stock value(0VALSTCKVAL).

Hi,
I have valuated stock value(0VALSTCKVAL) in the inventory cube. This is non-cululative key figures with inflwo and outflow (0RECVS_VAL and 0ISSVS_VAL). This contains the data in the cube (atleast 0RECVS_VAL contains the data).
But to surprise 0VALSTCKVAL do not show any data in the query result (just show zero values)
I have checked the aggregation at infoobject level - it is Aggregation- sum and Exception Aggregation-last value but still do not show any data.
can some one please tell me why it happen and how to get values in the valuated stock value(0VALSTCKVAL).

Hello,
Have you loaded the data using BX, BF and UM into the cube and compressed the requests using proper marker updates?

CRMD_ORDER: how to set default values for Requester and Change Manager

Hello Folks,
how do I set default values in TA crmd_order?
I drew my organizational hierarchy using TAs bp and ppoma_crm.
When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer) to be set automatically, not manually.
Both Requester (= Key User) and Change Manager are derivable. I did not find anything in SPRO neither in the OSS neither here.
Points will be rewarded as a matter of course!
Thanx in advance!

Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason

Setting default value for a jcombobox based on the value not the index

I am trying to set the default value for my combobox to the current year. One way I thought of doing it was to get the index of the value representing the current year and then use setSelectedInex to make it the default. Any ideas?
The relevent section of code is below.
GregorianCalendar gregorianCalendar = new GregorianCalendar();
int year = gregorianCalendar.get(Calendar.YEAR);
String currentyear = year + "";
int startyears = 2000;
int numyears = 25;
JComboBox endyearcombobox = new JComboBox();
endyearcombobox.setBorder( BorderFactory.createLineBorder(Color.DARK_GRAY));
endyearcombobox.setFont(standardfont);
endyearcombobox.addActionListener( new ActionListener() {
public void actionPerformed( ActionEvent event ) {
endyearcombobox = ( JComboBox )event.getSource();
endyear = endyearcombobox.getSelectedItem();
boolean same = endyear.equals(oldItem);
oldItem = endyear;
String[] endyearlist = new String[numyears];
for(int i = startyears; i < startyears+numyears; i++){
String item = new Integer(i).toString();
endyearcombobox.addItem(item);
Thanks
Ged

Thanks mate,
That was what I was looking for. I still had a little more manipulation to do, but sent me on the right track and have got it working now. I don't know why I didn't think of it in the first place.
Ged

Wrong values for Total stock - Inventory managment ( negative values)

Similar Messages

Maybe you are looking for