WRT160N Access Restrictions

I have a WRT160N version 1 running Firmware Version: v1.02.2.  It operates very smoothly and reliability but I cannot seem to get Access Restrictions working.  I get the dropdown of 1 () through 10() for the Access policy but after I name it in the "Enter Policy Name:" field, I get an error that says: "You must input a Service Name."  I honestly don't know what it is asking.  Is there some other field that I need to fill out before Access Restrictions will work?
Just a bit more info:  I am running WEP 128 with MAC filtering.  As I said, normal operation is fine, but I need to restrict the Internet access of a single MAC address. 
Any assistance would be appreciated.
Mike

I'm going nuts with this .. The access restriction is not working on my wrt16n v2.0.02 build 015 May 26, 2009
I simply have created a policy to block msn.com .. here are the steps I did ...
1- Name the policy BlockMSN.
2- Added the MAC address in the list to be blocked ..
3- Click on Enabled
4- Type in the URL http://www.msn.com
5- Type in the key words msn. 
6- Unchecked everyday and just selected Monday.
7- Unchecked all day, and selected the time slot between 9:00AM and 9:45AM ...
8- Click on Save (it was around 9:40 AM on Monday.).
Tried to open the msn website and rightfully so it was blocked ... I Tried yahoo and cnn and they both  opened ..
However when the time changed to 9:50 AM, I expected that I would be able to open the MSN site, however that site remained blocked despite the fact I was outside the window of my policy.
What am I doing wrong ??? also this forum doesn't allow you to upload pictures (I created a screen shot of what I have done but could not upload it.) 
The

Similar Messages

  • WRT160N V3 router ignores MAC address Access Restrictions, Filtering policies

    I have added a list of 2 MAC addresses in the Access Restrictions for the access policy #1 and enabled it with Allow policy.  But one of my PC's MAC address which is not on the list of access policy #1 still can access the internet and ping websites.  I tried to add a Deny policy in 2nd policy for this PC MAC address and then it can not ping websites anymore.
    The problem is why my PC with a MAC address not on the list of Allow Policy #1 can access the internet? It seems the router Access Restrictions don't work well.

    I've already added Deny rule (blocking all LAN IPs) to all computers accessing my network in Access Restrictions Policy #1 but I leave one PC left to access the router web configuration.
    Then in Acess Restrictions Policy #2, I added an Allow rule to one of my PC's MAC addresses (and its IP too) but the PC can not access internet and ping websites. It looks like the allow rule in policy #2 doesn't overwrite the Deny rule in Policy #1.

  • Internet down 11:55 pm to midnight due to access restriction policies

    I have some policies to restrist access to certain websites during working hours.
    This is for a WRT160N though I am not sure that makes much difference as others I have checked have the same issues.
    I have 3 rules, one allowing 12 am to 8 am, one restricting 8 am to 6 pm and a third one allowing from 6 pm to 11:55.
    Of course the third rule really should go all the way to midnight but this is not allowed by the interface.
    So, every night I am working along and then I lose all internet completely for 5 minutes. It is very disruptive as I do a lot of work at this time and much of it is done remotely.
    Any thoughts, tips or advice? Are there any linsys products that don't so this.
    Thanks

    Here's what I have in mind when it comes to Access Restriction on old routers. I'm not quite sure if this one applies to newer ones like yours. But all I know is, if you don't set up a rule, everything is allowed.
    When you set "Allow" to a computer or certain sites, let's say 12am-8am, it will provide access from 12am-8am only. Beyond that time, it will automatically switch to Deny. Same goes with Deny. If you set Deny to a computer or certain sites, let's say 8am-6pm, it will not provide access within the time frame only but beyond that time, it will provide access.
    I'm saying that you really don't need too many access restriction. My suggestion is, just set one rule to Deny access to all computers or websites 8am-6pm. So starting 6:01pm to 7:59am, access is allowed without actually setting up an "Allow" rule.
    Actually I have an opposite situation. I have 3 computers at home. I want the kids to go to sleep at 8pm. And so, I setup a rule to Deny access 8pm-1155pm and another rule to Deny access 12am-6am. So there's a 5min time Allowed access. But I don't bother, they are already sleeping.
    With an old router like mine, it's kinda easy. When you set the router to Allow access, you can only create a Deny rule. And when you set the router to Deny access, you can only create an Allow rule. You can't put both at the same time unlike newer ones. However, it works the same.
    HTH

  • WRT54G2 and WRT54G locks-up (freezes) when blocking web sites using Access Restrictions

    I am convinced that a few Linksys routers such as WRT54G2 and WRT54G have a major issue when blocking web sites using Access Restrictions (Internet Access Policy). After a few hours of internet access by 15 wired users the Linksys locks-up and blocks all internet web access. The only solution is to restart the power on the router.
    We are currently using a Linksys WRT54G2 v1 (firmware 1.0.04). We upgraded the WRT54G2 v1 firmware to the latest 1.0.04 version which did not resolve the issue.  NOTE: We were previosuly using a a Linksys WRT54G v1.1 (firmware 4.21.1) until the power supply blew a week after we started blocking web sites using Access Restrictions (Internet Access Policy).  
    Basically, we have a T1 internet connection and a hub connected to the Linksys router. We are trying to block several web sites such as facebook, myspace, etc. for 15 wired users. We do not use wireless connections.
    This is the 2nd time it happened with 2 different models.
    Please help ASAP.
    Thank you,
    Lance
    (Mod note: Edited post. Some parts off topic.. Thanks!)

    Also,  you have already upgrade/re-flash the firmware of your Linksys Router you need to reset and reconfigure your router from scratch. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • How to configure CLI/DNIS based access restriction in 5.3 ?

    Hi,
    does anybody have an idea how the setting
    define CLI/DNIS-based access restrictions which is defined in ACS v. 4.2
    can be configured in acs 5.3 ?
    in v. 4 for every user in a group with 40 members  a different CLI is defined for each. How can I configure that in version 5.3 ?
    any help as always much appreciated!

    The equivalebt to NAR functionality can be found at:
    Policy Elements > Session Conditions > Network Conditions > End Station Filters
    Can then define an object with a set of CLI values
    These objects can then be used in policy conditions. So can create a condition with a set of CLI values and then match in authorization policy for values that are included in this set and set authorizations accoridngly
    Not sure if this is your use case but hopefully may be a start

  • Access restrictions timing off by 1 hour

    I don't know if anyone else is experiencing this problem.  I have set access restrictions on my WRT610N router and they execute an hour earlier than set.
    I checked the time zone settings, the system clock and all seem correct. I have a rule that is supposed to turn off access to the Internet at 11:55pm. However, the rule gets executed at 10:55pm.
    This was happening on my first WRT610N which was also dropping network connections. So, I returned that unit and got a replacement.
    The new unit does not drop connections but has the same timing problem.  The only solution I have found is to change the time zone to the next one that is 1 hour behind my time zone.
    Please let me know if anyone else has experienced this same situation.

    My ISP is on the same town as I am. The information they are supplying appears to be correct as my WRT54G uses the same information and its rules execute properly.
    I think there is a problem with the WRT610N. My solution is temporary I hope that Linksys will fix this problem. 

  • WRTU54G-TM Slow Setup Page and HTML Error on Access Restrictions Page

    I have a WRTU54G-TM Wireless Router.  It has v1.00.21 firmware and I have done a reset with no solution.  Everything seems to work, except the setup pages load very, very, very slow.  Also in Internet explorer I get an HTML error on the access restrictions page. Resets don't help.  The router did not have this issue until about a month ago that I recall.  I can see on the access restrictions page the gray shading is all lined up except at the bottom on the page, like ther is some sort of issue in the html within the router.
    One more problem, after I reset the router the saved config file I made would not change the default settings back, I had an older saved config file also, it would not work either.
    Is this an issue with this firmware version?   Any one else see this?
    Message Edited by johnsonle9 on 01-24-2010 01:24 PM
    Message Edited by johnsonle9 on 01-24-2010 01:24 PM

    Are you getting the same problem with another computer...?
    Try using different computer and check if you are getting the same problem or not...If yes then,I would suggest you to re-flash/upgrade the router's firmware,reset the router and re-configure it from scratch..Do not use the save config file.

  • Access Restrictions bug of firmware 1.01.1 for WRT54G V5 V6

    I am using WRT54G V5.
    The Access Restrictions function won't work properly when using firmwares 1.01.1 and 1.01.0. Ports can't be blocked by using the "Blocked Services" in this function.
    Now I have to switch back to 1.00.9 to make the port blocking work, but there is a DHCP server issue which could only be fixed in 1.01.0 or above.... Could someone fix this BIG BUG and roll out a new firmware????
    Thanks a bunch.
    Message Edited by Dennis_Hsu on 01-08-200705:02 PM

    What is your Fragmentation and RTS threshold value? I'm not sure if I'm reading your message right, but it says as far as I can understand 30. The value should be 2304 instead for both.
    Ty changing the wireless channel also to either 1, 6 or 11.

  • Access restriction error? not sure how to fix it....

    I am trying to use JPEGImageEncoder and i imported import com.sun.image.codec.jpeg.*; fine but i get the following error on my code:
    CODE:
    JPEGImageEncoder encoder =JPEGCodec.createJPEGEncoder(outImage);
    ERROR:
    Access restriction: The type JPEGImageEncoder is not accessible due to restriction on required library /usr/local/java/jdk1.6.0_07/jre/lib/rt.jar
    I am not sure how to fix this... anyone know what needs to be done? I am using eclipse and i see the rt.jar in my library....
    thanks!

    MikeTheBorg wrote:
    OK, I agree it's simpler for simple cases, but how do I do something like this:
              JPEGImageEncoder jie = JPEGCodec.createJPEGEncoder(os);
              JPEGEncodeParam jep = jie.getDefaultJPEGEncodeParam(bi);
              jep.setDensityUnit(JPEGEncodeParam.DENSITY_UNIT_DOTS_INCH);
              jep.setXDensity(1200);
              jep.setYDensity(1200);
              jep.setQuality(1, false);
              jie.setJPEGEncodeParam(jep);
              jie.encode(bi);
    using ImageIO?
    "Stupid" Eclipse+Maven refuse to compile this legacy code.It's an Eclipse error, not a Java/compiler error as such. To fix it, I believe you have to check your plug-in configuration -- imported packages here or exported packages there. Try adding "com.sun.image.codec.jpeg" to the imported packages. Something along those lines. Anyway, bottom line: this is not an issue with the code.
    Furthermore, lookee here: GIAD

  • WRT160Nv3 problem with blocking traffic using Access Restrictions

    Hi.
    I want something quite simple. Block Youtube. I go into "Access Restrictions", choose a name for policy 1, enable it, choose the pc from the pc list, but then...
    if a click Deny, all other options will be disabled (greyed out, can't click nor write on them).
    Therefore, I can't put the urls I want (youtube).
    I tried writing the url with "allow" and then change it to "deny" but it will block ALL traffic.
    No good.
    So, how do I make a new policy just to block this one URL?
    Is it normal that when I click and choose "Deny" everything gets disabled afterwards?
    Thanks in advance.
    Regards,
    Leo
    Solved!
    Go to Solution.

    for internet access policy DENY means to restrict internet access during specified days and hours. this will block ALL internet traffic for the said schedule. website blocking by URL, blocking by means of keyword and blocking applications would then be NOT AVAILABLE as the computers would not have internet access to begin with if you have such a policy disabled.
    for your case, you may want to try to set restriction to ALLOW internet access then specify youtube.com under Website Blocking by URL. this would allow computers to have access to the internet all the time (if you have the schedule set to EVERYDAY) or during specific days and hours but NOT have access to youtube.

  • Create access restriction in designer using script

    Hello,
    I am looking for a way to automate the creation of access restriction within universe.
    I looked in the API universe reference and it seems that there is no entries for such an object
    For information I use Business Objects XIR2 with SP3
    Thanks for any help or answer

    Creation/Modification of Universe Access Restrictions is not part of the Universe Designer SDK, but part of the BusinessObjects Enterprise SDK. 
    It requires sending requests to the CMS using the SDK to get User and UserGroup information.
    For the COM-based version of the Enterprise SDK, the object is known as Overload, and described here:
    [http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/en/BOE_SDK/boesdk_com_doc/doc/boesdk_com_doc/CrystalEnterpriseOverloadPluginLibrary.html#1351377]
    Sincerely,
    Ted Ueda

  • Access restriction in Universe

    Hi All,
    In our environment we have 2 domain (US and Europe) and most of the user have id created for both the domain. We have 2 identical databases one in US and other in Europe. US database holds US information and Europe holds Europe data. 
    In our BO environment we have set the ad groups to create new id for each user Alias i.e if the user abcd has access in both US and Europe domain BO creates 2 separate ids for each domain (bo internally creates abcd and abcd0). We have only one universe and set of reports which has connection switching based on the domain user logs into BO (access restriction at connection level). This works absolutely fine, switches database connection depending on the domain user logs in.
    Now we are hearing from our users that they can access the personal reports created under Europe login in US login (this because users has abcd and abcd0). So we decided to create enterprise id and alias the users from AD group (abcd --> alias AD abcd), if we do this the change the connection swap is not happening as the BOUSER always returns abcd as user and universe restriction is only picking the default connection.
    Thanks
    Srinivas

    Hi,
    As you have mentioned in the post that OS is solaris. so for Solaris LAFix has been released by PG for this issue.Below are the details:
    VERSION:     XIR3.0 LAFix0.18
    PLATFORMS:       Solaris Solaris 10
    LANGUAGES:       English
    ADAPT ID:      ADAPT01099598
    Synopsis:     Universe connection override does not work u2013 Error WIS 10901
    WARNING: This LAFix has not been through a full regression test cycle but it has been deemed to fix the problem reported by the customer.  Inadvertent introduction of an unforeseen issue can however not be fully excluded. Before providing this LAFix to the customer, Customer Assurance must perform their own tests to confirm customer issue is solved.
    ADDITIONAL INFORMATION
           Installation Instructions :
    1.     Stop all BO Enterprise services, e.g <BOE_DIR>/bobje/stopservers
    2.     Gunzip and Untar  XI3.0_RHEL_LAFix0.18.tar.gz
    3.     Change directory to <EXTRACTED_LOCATION>/LAFix0.13/DISK_1
    4.     Run install.sh
    5.     Re-start all BOE services, e.g ./startservers
           Uninstall Instructions :
    2. Run uninstallpatch.sh from your system.
         New Behavior :
                The above issue is now resolved.
         Limitations :
                No known limitations
         Component(s):
          libuum.so
    Note: LAFix is released on top of XI 3.0
    To download the or get the LAFix you need to contact to your Sales Account Manager of BusinessObjects.
    Cheers,
    Deepti Bajpai

  • Session and Access Restriction

    Hi:
    I have this problem with access restriction. I was trying to build a "secure" site with sessions where users are able to login and access secure webpages upon successful login. And these webpages are not available as soon as the user session expires or terminated. However, from time to time, these web pages are still accessible after logging out by pressing "back" button on the browser or book-marking these pages.
    I noticed that Hotmail and old Yahoo mail system have the same problem as the one that I have just described.
    I am not using https or virtual host or anythind like that, because I didn't have the resource. It is supposed to be a Basic Authentication (login/password) scheme.
    Could any one light me some fresh ideas?
    Thanks
    Tian Lei Xia ":)

    To avoid the bookmarking problem, set a session attribute with the login details.
    Once they login:
    if(request.getParameter("username")!=null)
         session.setAttribute("username","personA");
    if(session.getAttribute("username")==null)
         //don't display the page
    else
         //show them the pageThis is a very basic technique and there are other ways of doing this. As for logging out then the session should just be invalidated.
    An alternative would be to use the security features of the web deployment descriptor and get the web container to handle the sessions for you (See servlet API specs 2.3 for more details).
    Good luck,
    Anthony

  • Problem with access restriction

    I have about 50 to 80 users under my internet connection and i used the router 2500 and make there repeater of the single connection but i want to restrict many of the user on interner and some on timely but is not possible with this version of product, what can i do house, or what software do you suggest for me to use with this to restrict the internet access on this network. 
    Again, i try to use switch sf100-24 becos of the numbers of the cable to use that is more than 4 as we have only 4 port on the router for ethernet but if i connect it after few second it will make all the connection saying 'unidentify network' and it will not function again what can i do to solve this problem too please!!! help me house

    Hi, you might perhaps consider getting a gigabit switch in order for those devices to be able to work with access restriction.

  • Access Restriction tab is missing on e3000 web interface

    I am quite sure that this tab has been there before but now its missing - could it be because I have activated  Parent Control on Cisco Connect ?
    If so - how do I 'get It back'
    (I thing parent control in Cisco connect is too limited)
    Regards
    Fleohans
    Solved!
    Go to Solution.

    Yes, the Access Restrictions tab goes away when the Parental Controls section is activated. According to the faqs, a hard reset is the only way to restore it.

Maybe you are looking for

  • Cannot open pictures in iphoto

    I went to download pictures to iphoto on my MacBook Pro and all i get is the hour glass circle.  The iphoto menu does not come up either. 

  • QM control key functions?

    Dear SAPIENTS, I would like to know the details description of QM control key in material master. I have defined control key 0007 in which Release required, Invoice block is selected. Now at the time creating Po for this material following error is c

  • Could some one please tell me how to take screen shot?

    I was prompted once by the computer to take a screen shot. Now I can't figure out how to do it again.

  • PDF Display INSIDE a SWING app.

    Is there a way to display PDF inside a JPanel (or whatever ;-) ? I know Adobe made a Bean but no support was added since two years (if i am right). PDFGo could be a solution but it seems slow and not really nice... Other solutions ? Anyone has alread

  • ITunes U Publishing Profile in Camtasia Relay

    I work for UMass Boston and am in the process of trying to set up a publishing profile in Camtasia Relay to our iTunes U site. My issues is with the site URL as it exceeds the character limit set in the iTunes U profile creator in Camtasia. I was won