WRT54G always reseting and very slow speeds.
I don't know whats going on, I have a WRT54G router thats completely up to date with the firmware and the such. I am connected to it via Ethernet cable, and only use the wireless part for my videogame stuff, so its not just the wireless network thats messing up, its the hardwired that is losing connection. Every half hour or so the router loses its connection and I'll either have to just wait for it to reconnect or have to power down the router (and sometimes the modem, or restarting the whole computer) and power it back up for it to be able to connect again. I have tried completely reseting the routers settings and uninstalling the EasyLink Advisor and reinstalling that and reconfiguring the router but its still doing this. When I am able to connect, my internet speeds are very slow. I am used to getting 200-300k/sec but now I am getting maybe 80k/sec when downloading. Is it possibly my router thats just messed up? thanks in advance(also, when i finished typing this my internet shut down again, and I had to restart the computer multiple times and now im just plugged into the modem so i get a stable connection..) Message Edited by zechgroove on 10-17-2007 02:24 PM
Message Edited by zechgroove on 10-17-2007 02:36 PM
access the router's web interface and try changing the MTU size to 1400 / 1300 .. check whether this makes any difference..
Similar Messages
-
Why is PDF scrolling not always smooth and very slow?
With some of my adobe reader pdf's, when I scroll along, it goes super slow. Sometimes, when I stop scrolling, the document keeps moving for several seconds, so I then have to scroll back up to where I wanted to be. Why does this happen with some documents? Is there a way to fix it? Is there another reader that might help in those situations?
Aaron (first time asking a question on this or almost any forum) (email address removed by host)Although "normally" using too much memory causes these types of problems, I currently have the latest and fully loaded machine (macbook pro retina with maxed out memory....), so I did not think that was the issue, although still a helpful suggestion.
However, I have solved the problem, for anyone interested. I searched several forum discussions on this website and saw a lot of references to using "preview" rather than adobe reader, to read my longer pdf's. I followed one suggestion, changing the settings to "change all" pdf's to be opened and read through preview. OMG, what a difference! It is perfect now, an amazing difference. So, I am happy, as my digital ebooks in pdf form are now actually readable. -
Problems connecting and very slow speed
When trying to connect to my airport sometimes I've been getting an error message telling me that it can't connect. I have made no changes and moved nothign around. Also when it does finally connect it takes very long to load a page. As of right now I have just plugged an ethernet cable into my computer. Also my computer will no longer connect to the Airport automatically. Can someone please help?
Thank You
TamaraGreetings Tamara Lyke,
To set up your computer to connect Automatically to your Airport:
go to System Preferences; click on Network; Location: Automatic, Show: Network Port Configurations; Make sure Airport is Checked and make sure you click on Apply now.
this might help too.....
http://www.apple.com/support/airport/
http://docs.info.apple.com/article.html?artnum=58543
I hope this helps... -
Got a new EA4500 for X'mas
After setting up the new router I could only access youtube and google at a very slow speed, however I can not access anyother website - facebook, yahoo and etc...
it would ping yahoo and google no problem
friend told me to do a tracert some ip address and his conclusion was the router is fully functional
ISP uses PPPoE, Im sure that the username and password are correct.
upgraded to the latest firmware manually, and holy hell accessing the router with no internet access is a pain in the **bleep**!
Please help and Merry X'mastonup80 wrote:
I've made sure that both the EA4500 setting were the same as the WRT54G, did not solve the problem.
IP Address behind WRT54G is 192.168.1.103
behind modem is 202.151.XX.XX
It might be a DNS problem. Release & renew ip on the status page of your router. Just make sure you are already using the latest Linksys smart wifi firmware, reset the router & reconfigure. You can download the firmware here http://homesupport.cisco.com/en-us/support/routers/EA4500. -
Brother dcp115c printer prints at a very slow speed
after the installation of snow leopard, my printer prints at a very slow speed.
anyone got suggestions on how to improve? thanks alot
the driver version is correct.tonup80 wrote:
I've made sure that both the EA4500 setting were the same as the WRT54G, did not solve the problem.
IP Address behind WRT54G is 192.168.1.103
behind modem is 202.151.XX.XX
It might be a DNS problem. Release & renew ip on the status page of your router. Just make sure you are already using the latest Linksys smart wifi firmware, reset the router & reconfigure. You can download the firmware here http://homesupport.cisco.com/en-us/support/routers/EA4500. -
Hi, from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
Turn the Phone On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
2.4GHZ clients very slow speeds with AP3600
5508 WLC (7.5.102)
AP36021
We currently have a test WiFi SSID setup that uses basic mac filtering on our WLC's
WLAN is configured with WPA and WPA2 L2 Security with WPA Policy and WPA2 Encryption.
For some reason we seem to be getting very slow speeds on clients with 2.4GHZ
for example speedtest.net I get 70mg upload and 65mg download on 5GHZ devices and about 1-3mg download and 1mg upload for 2.4GZ devices!
AP36021 are dual band with 4 channels (2 x 2.4Ghz and 2 x 5Ghz)
fyi - There are no dropped packets on the client stats via Prime mgmt that use 2.4GHZ
Any ideas here?Foreign Primary WLC (let me know if you need the Anchor controller ouput as well)
We have 3 ports configured as 0/12 trunked
interface GigabitEthernet0/12
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
load-interval 30
no cdp enable
channel-group 3 mode on
spanning-tree portfast
end
Building configuration...
Current configuration : 330 bytes
interface Port-channel3
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
logging event trunk-status
logging event bundle-status
load-interval 30
end
AP switch port config
Building configuration...
Current configuration : 617 bytes
interface GigabitEthernet4/32
description AP36021
switchport
switchport access vlan 30
switchport mode access
switchport voice vlan 20
load-interval 30
speed auto 10 100
wrr-queue bandwidth 5 90 5
wrr-queue queue-limit 5 80 5
wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue cos-map 2 1 0 1 2 4
wrr-queue cos-map 3 1 3 6 7
no snmp trap link-status
mls qos trust cos
no mdix auto
spanning-tree portfast
end
show wlan 4
WLAN Identifier.................................. 4
Profile Name..................................... WLKPV
Network Name (SSID).............................. WLKPV
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
--More-- or (q)uit
Number of Active Clients......................... 21
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 7200 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... hellotest
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ new-byod
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
PMIPv6 MAG Profile........................... Unconfigured
PMIPv6 Default Realm......................... Unconfigured
--More-- or (q)uit
PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
--More-- or (q)uit
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
--More-- or (q)uit
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
--More-- or (q)uit
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
--More-- or (q)uit
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
4 10.x.x.x Up
4 10.x.x.x Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled -
I was found I pad Air is not that user friendly than I pad 4 even I pad 2, as I was a TaoBao (www.taobao.com) fans and every time when I get in their link, I pad Air cannot show all the pictures on the screen and very slow. It make me very disappointed about this. Could you please help to improve this. Thank you vey much!
iPad running slow? How to speed up a slow iPad
http://appletoolbox.com/2012/07/ipad-running-slow-how-to-speed-up-a-slow-ipad/
If You Think iOS 7 Feels Slow Here’s How to Speed It Up
http://osxdaily.com/2013/09/23/ios-7-slow-speed-it-up/
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Cheers, Tom -
Cd tray opening on boot up and very slow boot up, 5 mins plus
Hello, very new to Macs, only had this a few days. G4 800 mzh 1.5 gb ram running os 10.4. Cd tray opens on boot up and very slow boot up. Tried resetting pram and fsck. No joy with either.
Any help and advice much appreciated
Thanks
JonA warm welcome to Macdom & Apple's forums!
You may need to reinstall some things, or maybe even the whole OS.
How much free space is on the HD of what size?
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! -
Short Battery Life and Very Slow Data on 4S
Short Battery Life and Very Slow Data on 4S,
anyone else noticing the slow speed of data on this phone?Yes, I measure my slow data on Sprint in kpbs, not Mpbs. Like standard is download maybe 250kpbs, upload 100kpbs (that's 0.25 Mbps and 0.1 Mbps). On the same tower my buddy who has an AT&T iPhone 4 shows 2.5Mbps download and 1.5Mbps upload (that's 2500kbps and 1500kpbs), a LOT faster. Sprint has not been much help.
-
Black&white picture and very slow working HP Truevision HD
Hello!
Few days ago my webcam start working only in black&white and very slow - it's like slide-show.
Problem in any program (Skype, windows camera, youcam...).
I tried re-install drivers and even OS - nothing helps.Hi @tcheshire ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY dv7-7255dx Notebook PC and issues with the WebCam in black and White and slow moving. Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that might need updating.
When you look in the device manager do you notice anything with a yellow mark on it?
Here is a document on how to troubleshoot the Webcam and the software. It shows you how to test the Webcam.
Here is a document on how to troubleshoot and resolve issue with the Webcam.
Hope this helps you fix the WebCam.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Premiere Pro CC locking up and very slow to load bigger projects
I am having a problem with premirepro cc locking up and very slow to load bigger projects.
Windows 8 machineI am having the EXACT same issue and now we are WAY behind deadlines. We have Adobe for Teams on 3 computers, all are HPZ820, Dual Proc with Intel(R) Xeon(R) CPU E5-2650 @ 2.00GHz, 32 GB RAM, Dual Video Cards Quadro 6000 4GB, Windows 7 64 bit with all the latest patches. Everything worked on the first release of 2014 but last week there was an "update" to Premiere. Since this update, projects work for a short period. When you start a new project and add footage, you can scrub the footage and play the footage with no issue. But the more assets you add, simple Titles, it slowly starts to fail. Playing the timeline starts and stops and then finally the end result is you can't even play the timeline. The Program window is frozen. I have even tested starting a new project, adding assets one by one but no matter what, I get the same results.
-
firefox 4.0.1 is constantly freezing, having to reboot constantly, and not responding to key strokes, and very slow responses to keys strokes and to change sites. Firefox 3. (the previous incarnation of firefox) did not have such problems - this has started since "upgrading to 4.0.1 - I want to change back to the previous Firefox since this is a serious problem - need specific instructions on how to go back to the old Firefox
Do you have multiple keyboard layouts installed?
It is possible that you have switched the keyboard layout by accident.
* http://support.microsoft.com/kb/258824 - How to change your keyboard layout
Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
* http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
* Make sure that you have the Language bar visible on the Windows Taskbar
* You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
* Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
* You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application -
Beach ball and very slow to respond IMac
Each mouse click produces beachball and very slow response times -minutes, and some functions will not respond at all -Safari.
Please confirm that you are actually on OS 10.6.2?
And, which Mac model/year?
Then please check how much of your hard drive space remains empty/available.
And, lastly, check how much RAM you have installed. -
POP3 mail servers locking up and very slow!
POP3 mail servers locking up and very slow! What is the deal with this? Verizon does not monitor these situations? Residential mail a low priority. Businesses run their own servers. Now we are back to having server issues again with Verizons Email? Last time mail was being delayed and now servers connect and lock up!
FWIW I am not experiencing any slowdowns or lockups on email. I Just checked two of my Verizon email accounts and no problem. But it is almost an hour since you posted so maybe Verizon fixed something?
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248
Maybe you are looking for
-
Why did frame rate of video shot on iphone 5 change from 30 fps to 24 fps?
Why did frame rate of video shot on iphone 5 change from 30 fps to 24 fps?
-
HP Mini 110-4250 Screen replacement
Hi i was just wondering which replacement screen i purchase for: HP Mini 4250NR 10.1" P/N - B5S14UA#ABA United States Windows 7 Starter Also could you provide me with instructions on how to change it out? Thanks so much!
-
TS1398 i can't access to wifi ..... it's so weak
i can't access to wifi ..... it's so weak.... it's conncet but when i'm so close to router what's the problem ..... is it from software or hardware ??? and how i can fix it ???
-
How to Have file/camera info in jpeg copy
I have a Nikon D80. If I make a picture copy in PSD, the camera info (flash, aperature, etc.) is lost.However, the XMP/IPTC info is fine. What should I do? Changing th preferences from sidecar to database didn't help. Thanks!
-
User exit M06B0002 Changes to comm. structure for purchase requi
Hi Folks, Do any of you fine guys if there is a note to implement to get the same tables available in "M06B0002 Changes to comm. structure for purchase requisition release" as you have in "M06B0005 Changes to comm. structure for overall release of re