WRT54G not working....all lights on

Last night my router was working fine. Xbox 360 was connected to Xbox Live and I was on the Internet on my PC. Then, I lost my connection all of a sudden. Connecting PC directly to the modem works fine, so it is definitely a router issue. Now, when I plug in the router, all the lights come on (except the Internet light). Power light blinks. (I understand this may be a firmware issue, but how can I upgrade the firmware if can't connect to the Internet thru the router?) I tried resetting the router and that didn't work. Any ideas?

Sounds like its been what they call "Bricked" or dead in other words.  What version and how old?  Can you ping the router?

Similar Messages

  • Short key for copy does not work all the time now.

    After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time.  It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac.  Please help.

    I've plugged in my default mac keyboard and the short key copy still does not work.

  • Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps but the rear camera is not working, all other apps work perfectly well, how do i resolve this

    Hello, my iphone 5s fell, thereafter i tried taking a picture, the camera app just shows a black screen and hangs, the front camera works on other apps (such as facetime and skype) but the rear camera is not working, all other apps work perfectly well, how do i resolve this

    Double tap Home button and delete Camera app from multitask-list.
    Do a
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
    If problem persist, make an appointment with genius bar for evaluation.

  • Has anybody experienced the iPhone off switch not working all the time.

    I have an iPhone 5, it's about 16 months old and it has experienced an annoying issue.  The off button does not work all the time, sometimes I have to press it multiple times and other times it just works.  The worst case is when it does not work at all, very frustrating.  I didn't expect this type of issue for a phone that is not even a year and a half old.
    I did some searching on the internet and there are 2 schools of thought, the first is that this is a hardware fault and Apple know about it but won't admit it because it would cost them too much to repair/replace phones with the issue.  The second school of thought is that it is a software issue and a backup/reset/restore will fix it; I tried doing this but it did not resolve the issue.
    Further digging seemed to suggest that it was really a hardware fault and the only option was to get a refurb from Apple for a ton of money, not cool.
    Anyway, if anyone has any more information that could help me resolve this issue I would greatly appreciate it.
    //*eggbox23

    @diesel vdub, thanks for your suggestion, I setup an appointment with the Genius Bar and found out in about 5 minutes that everything I have read up on so far is true.
    Firstly the technician admitted that there is a sporadic fault on the iPhone 4s and iPhone 5 switches, something to do with the design of the switch that included a rubber element that rolls up (whatever that means) and causes the switch to fail. He then indicated that the iPhone 5s does not have the issue because the switch has been completely redesigned.
    Since I was stupid enough to not take out the extended warranty the only options he gave me were to purchase a new phone or to get a refurb for $269, not cool. Why would anyone think that a phone would not work correctly for 2 whole years when the phone only cost about $600!
    Since I have about 7-8 months left on my phone contract I am not prepared to pay for either option.  I find it amazing that a phone can develop this type of issue in such a short time and then expect the customer to pay for their failures.  Apple supposedly sells a very high quality product for a very high price, looks like they have taken a step back from this philosophy.
    I am disappointed in the options that he gave me (I don't blame the technician) but I suppose I expected more from Apple in terms of quality and service.
    //*eggbox23

  • Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7

    Help, do not work all the push notifications for iphone 4 (A1332) after the ios 7

    I have the exact same problem you have? I can occasionally getpushnotification, but only once a day fore facebook. For twitter, I get nothing and newer got. Other programs never got any notification att all.Push notification is on both under notification center and the respective programs.I have iOS 5.0.1 on iPhone 4S.

  • My optical drive on my macbook pro mid 2009 series is not working all the time.

    I have a Macbook Pro mid 2009 series and just recently my optical drive is not working all the time. At times it decides to not spin a disk that has been inserted in the drive. I am currently deployed in Afghanistan and this is one of the very few things i have to distract me from the day to day haul. This is something that just started to happen and its very fustrating since i have limited support for this.

    Another help source (if you haven't already done so).
    Go to your OS Help Menu.  In the search field type dvd
    Click on all the troubleshooting topics & Support Articles that pertain to  your issue.
    You can also do the same in Disk Utility.  Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    ===============
    Try a different brand.  Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim
    DVDs
    Maxell
    Verbatim
    ==============
    Apple's Disc Burning Quick Assist
    http://support.apple.com/kb/HT2801 Apple Portables: Troubleshooting the slot load optical disc drive
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://support.apple.com/kb/TS2000 Mac doesn't start up from install disc
    http://support.apple.com/kb/HT2801 Apple Computers: Troubleshooting the slot-loading SuperDrive
    *** Your drive may need cleaning.  Cleaning kits can be purchased from any store that sells CD/DVDs. ***

  • Home button is not working all the time

    I have started to notice that when I press the home button on my iPhone 4 it does not work all the time. This problems has only started to occur and was first noticed around three months back, however I did not make a big fuss out of this because it was not as often as it is now.
    Sometimes i find this extremely frustrating as it occurs even when the phone is locked and you are trying to bring up the unlock menu (which I know this can be done by using the wake up/ lock botton located on the top of the phone)
    but this also is a pain when it happens, whilst using an app e.g. playing a game and trying to text someone.  Because of the faulty this also makes multi tasking sometimes impossible.

    Try calibrating the Home button.
    1. Open a pre-installed app, such as Contacts
    2. Press and hold the sleep/wake button until the red slider appears
    3. Immediately release the sleep/wake button; press and hold the Home button.
    4. Hold until the red slider disappears.

  • Since updating my 4s with the new 7.0.2 my front camera is not working, all I see is blurred colors. Anyone know how I can fix this?

    since updating my 4s with the new 7.0.2 my front camera is not working, all I see is blurred colors. Anyone know how I can fix this?

    Yes... remove your finger from the camera lense.

  • TS3367 my face time will not work all i see is a green light and thats it

    My face time or photo booth or anything that has to do with the camera will not work i see either a green or red light and thats it ?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • WRT54G not working with Satellite internet

    Please help!
    I purchased the Linksys WRT54G a few months ago, set up my home network (laptop with wireless running XP, desktop hard wired to router running 2000, and desktop wireless running XP) everything worked great!
    I got the internet installed.  We ( the installer and I ) got the internet to work on my laptop, and he left, said the rest is up to me!  I did not think it would be to bad, but I am stuck!!
    My laptop no longer connects to the network! - I can ping the WRT54G but can not see any thing else.  I can connect to the internet only if I plug directly into my laptop, if I go into the Linksys it will not work from any computer!  My other two computers still see the network and can talk to one another but not to the laptop.  I can no longer print from the laptop (which I could do before) the printer is off of the 2000 destop, used to work great!
    I have tried some things that I seen here on the forms, "cloned the Mac address" "updated the firmware" and "power cycled" until I am blue in the face, but to no avail!
    Additional info - There is a Linksys 8 port 10/100 Switch placed after the Satellite modem, to connect some other hard wired pc's in the house.
    It goes Satellite modem - Switch - (some computers attached here) - Router - (rest of the PC's attach here).
    I hope you can understand my ramblings!
    Any help is greatly appreciated!
    Thanks  
    Message Edited by samsom on 06-17-200706:36 AM
    Message Edited by samsom on 06-17-200706:37 AM

    Satellite modem: LAN side set to 192.168.1.1 (assumed)
      dhcp enabled: range: 192.168.1.20-200
    Switch: if this is an intelligent switch set it to 192.168.1.2
      dhcp: disabled
    Router: set to 192.168.1.3
      dhcp: disabled
    If the satellite modem using a different base setting (ie. 192.168.222.1) you must adjust all other values(222) to match.
    samsom wrote:
    It goes Satellite modem - Switch - (some computers attached here) - Router - (rest of the PC's attach here).

  • WRT54GS Not Working.

    Ok,so i have a Cable modem & my wireless router,everything was fine & then a fuse blew & turned both my modem & the router off,i fixed the fuse. My modem was messed up abit,i called support & fixed it,then when i tried to connect my router to the modem & get online through it wired it would not work nor will wireless,the signals show up but no net connection. I called Linksys,they told me a few things to do,none worked,plus the 2 year warranty is up,so i could not really get any help. The Router itself seems fine,solid power light,& all the other lights work & blink,showing some sort of activity. The only way i can get online is direct through my modem,but that is no good,i have other users who need to get online wireless style,as well as i needing to get online through use of the router wired connection. Im not sure what else to do,ive tried a bunch of different resets & configs,any idea's? Ide really appreciate it.

    1)ensure the modem is connected to the router's internet port and the computer to the router's port#1
    2)access the router using http://192.168.1.1 . the default password is admin
    3)on th ui, click on the "mac add clone" subtab , enable it and click clone
    4)save the settings and do a power cycle
    5)check whether you can go online now ..

  • X1- Companion Box, NOT WORKING, FLASHING LIGHTS

    Over three days now, the second X1 box in my bedroom has not worked.  The blue power light is on, and the envelope light was on. I unplugged the box, and now all 3 lights- record, enelope, and another blink in sequence.  HELP.

    UNPLUG it and reboot it. If that doesn't help the box will need to be replaced. We have heard this issue before...
    JTY1 wrote:
    Over three days now, the second X1 box in my bedroom has not worked.  The blue power light is on, and the envelope light was on. I unplugged the box, and now all 3 lights- record, enelope, and another blink in sequence.  HELP. 

  • WRT54G Not working now

    I bought a WRT54G v5 last June and it worked perfectly for a long time, until October or so and just stopped working all of the sudden. I've tried running the setup disc several times with DHCP and PPPoE and continually get a message saying that an internet connection couldn't be detected. It connects just fine without the router(obviously) but when I reconnect the cables nothing works. The only thing that I could think of being the problem is our Norton Internet Security 2007 program, but I'm not sure what to change if anything. If anyone could help at all it would be greatly appreciated. Also, if there are any other common problems fell free to ask if I've experienced them.
    Our connection is dsl through Earthlink with a modem they provided (ZyXEL P-600 Series).

    When the modem is connected directly it auto connects (only need a log in and pass for email)
    Microsoft Windows XP [Version 5.1.2600]
    (C) Copyright 1985-2001 Microsoft Corp.
    C:\Documents and Settings\Owner>ipconfig/all
    Windows IP Configuration
           Host Name . . . . . . . . . . . . : HOME
           Primary Dns Suffix  . . . . . . . :
           Node Type . . . . . . . . . . . . : Hybrid
           IP Routing Enabled. . . . . . . . : No
           WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Local Area Connection 4:
           Connection-specific DNS Suffix  . :
           Description . . . . . . . . . . . : SiS 900-Based PCI Fast Ethernet Adap
    ter
           Physical Address. . . . . . . . . : 00-E0-18-6F-78-4A
           Dhcp Enabled. . . . . . . . . . . : Yes
           Autoconfiguration Enabled . . . . : Yes
           IP Address. . . . . . . . . . . . : 192.168.1.100
           Subnet Mask . . . . . . . . . . . : 255.255.255.0
           Default Gateway . . . . . . . . . : 192.168.1.1
           DHCP Server . . . . . . . . . . . : 192.168.1.1
           DNS Servers . . . . . . . . . . . : 192.168.1.1
           Lease Obtained. . . . . . . . . . : Tuesday, January 30, 2007 10:28:17 P
    M
           Lease Expires . . . . . . . . . . : Wednesday, January 31, 2007 10:28:17
     PM
    C:\Documents and Settings\Owner>
    Well, the ip is 192.168.1.100 so someting must be wrong. Any ideas?
    Thanks for the quick reply, btw.

  • HT202157 My apple TV is not working with light flashing after up date

    My apple TV is not working with the light flashing after an up date, what can be done?

    same here macbok air 2012 appletv 3 bugs the **** out of me
    it just stops randomly after a "while"

  • Buttons not working, all of a sudden?

    Nothing has changed, no editing was done, and all of a sudden, buttons not working.  I trued exporting from Flash again, with the same pblish settings.  Bit Action Script seems to give me a message now saying it wont export as a button.  Tried AS 2.0 and 3.0, but i made original files in 3.0
    thoughts???
    thank you!

    Either convert that symbol to a button symbol so that you can use the code you showed, or assign it an instance name and place the following code in the timeline...
    yourMCName.onRelease = function(){
         getURL("page2.html","_self","GET");
    Where yourMCName is whatever instance name you assign

  • Not working and light blinks orange?

    My Airport Express is connected to powered computer speakers and was able to receive my iTunes over the network.
    Now for some reason it is not working and the light is blinking orange?

    Hi
    Status light blinking amber means:
    AirPort Express has completed its start up sequence but has no IP connection (due to out of network range, Ethernet unplugged, no path to Internet or local router, ISP problem, set up as wireless client but not in access control list, etc.)
    I would unplug it leave it for a bit then plug it back in. If this doesn't work, then reset it.

Maybe you are looking for