WRT54G not working with Satellite internet

Please help!
I purchased the Linksys WRT54G a few months ago, set up my home network (laptop with wireless running XP, desktop hard wired to router running 2000, and desktop wireless running XP) everything worked great!
I got the internet installed. We ( the installer and I ) got the internet to work on my laptop, and he left, said the rest is up to me! I did not think it would be to bad, but I am stuck!!
My laptop no longer connects to the network! - I can ping the WRT54G but can not see any thing else. I can connect to the internet only if I plug directly into my laptop, if I go into the Linksys it will not work from any computer! My other two computers still see the network and can talk to one another but not to the laptop. I can no longer print from the laptop (which I could do before) the printer is off of the 2000 destop, used to work great!
I have tried some things that I seen here on the forms, "cloned the Mac address" "updated the firmware" and "power cycled" until I am blue in the face, but to no avail!
Additional info - There is a Linksys 8 port 10/100 Switch placed after the Satellite modem, to connect some other hard wired pc's in the house.
It goes Satellite modem - Switch - (some computers attached here) - Router - (rest of the PC's attach here).
I hope you can understand my ramblings!
Any help is greatly appreciated!
Thanks
Message Edited by samsom on 06-17-200706:36 AM
Message Edited by samsom on 06-17-200706:37 AM

Satellite modem: LAN side set to 192.168.1.1 (assumed)
  dhcp enabled: range: 192.168.1.20-200
Switch: if this is an intelligent switch set it to 192.168.1.2
  dhcp: disabled
Router: set to 192.168.1.3
  dhcp: disabled
If the satellite modem using a different base setting (ie. 192.168.222.1) you must adjust all other values(222) to match.
samsom wrote:
It goes Satellite modem - Switch - (some computers attached here) - Router - (rest of the PC's attach here).

Similar Messages

300N Router/Adapter not working with Satellite internet

I had previously SRX200 router and it was working fine with Satellite but recently I bought again 300N router and adapter but it's not working. It give the strong signal for few seconds and drops it rightway. Please let me know if there is something I need to do with settings.
Thanks
Paul

Paul make sure that the firmware of this router is upgraded to the latest version 1.03.0, it resolves a lot of issue.

WRT54G not working with cable internet access - request for help

Good evening!
At least that's the time when I write this.
I have a PC running Vista 64-bit version.
Until yesterday, I was connected to the internet using my WRT54G and a cable modem. There was a power outage (or blackout) and I lost my internet connection. I was not home when this happened. I got home and found the circuit breaker off. Since then, I can not access the internet anymore when I use the router.
If I connect the computer to the cable model directly, I can access the internet without a problem (hence I'm able to post this).
If I connect the computer to port 1 in the router, and connect the cable modem to the internet port in the router, I am not able to connect to the internet.
I have already:
- updated the firmware to the latest version (it was already installed)
- reset the router pressing the "reset" button for 30 seconds, unplugging it, and reconnecting power still pressing the "reset" button for 30 seconds.
- power cycled the devices
- tested 3 differnet patch cables that I know are good and they work
- reset the modem via a soft-reset remote request sent from the cable operator
None of these options have helped me restore my router's connection to the internet.
I know the router is working because I can print using my wireless printer and I can see my shared drives in the other PC I have connected to it, but none of them are able to connect to the internet!
Does anyone have any additional ideas on how I can fix this, before I go out and buy a new router?
Thanks in advance!
Pablo

As you have mentioned in your previous post, that you have resetted your router and you are still able to Print from your Wireless Printer, I Feel that your Router is not getting Resetted properly, whenever you reset your router your router goes to Factory default mode, and it will change the wireless network name to "linksys" and your Network will be unsecured. Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable.
Once you reconnect the power to the Linksys router, On your computer Open IE and in the address bar type (http://192.168.1.1) and hit enter, when prompted for username and password, Leave the username blank and in password type "admin" and click Ok. Below the Setup tab you will find MTU, So change it to "Manual" and change the size from 1500 to 1365 and Click on Save Settings. Then Below the Setup Tab you will find the Sub tab "MAC address Clone" click on it and "Enable" and click on "Clone your PC's MAC" and click on Save Settings. Now you can Unplug the Power from Router and Unplug the Power for Modem. Wait for 30 seconds, and 1st connect the Power to your Modem and wait till all the lights goes Stable then you can connect the power to Linksys router and once all the lights are sold. On your computer Open IE and check if you are Online.

External subwoofer not working with Satellite C55t-A5222

When I plug in an external speaker system into my laptop, the speakers work, but the subwoofer does not. I have tried two different speaker systems and have the same problem. I know the subwoofer works, because when I connect an ipod or iphone to the speakers through bluetooth, the sound is great. How can I get the same sound when the speakers are connected directly to my Satellite C55t-A5222 laptop? I have verified that I have the latest driver for my sound.

I was having the same problem, so I called Customer Service. The Tech diagnosed the problem with the Realtek HD Audio Manager. I had upgraded to Windows 8.1 from 8.0 so some of the drivers and devices my not have installed correctly, he guessed.
He went Control Panel > Hardware and Sound
Under Devices and Printers he selected Device Manager>Sound, video and game conroller>
He seleced Realtek High Definition Audio
He went to the Driver Tab and selected 'Uninstall"
He uninstalled the Realtek Device and rebooted my laptop.
After the Reboot, he went back to Control Panel>Hardware and Sound and went all the way at the bottom selected "Realtek HD Audio Manager. I don't recall if it was there before, but I assumed it wasn't since he was not able to find it previously.
The then opened up the Realtek HD Audio Manager and selected DTS Tab and clicked the 'Launch' Button. He then selected 'External Speakers and 'Viola' My External Cyber Acoustics CA-3602 2.1 Speakers including the Sub Woofer were 'shaking' my office again! YEAH!!
He said that each time I want to use the External Speakers and Headset I might have to select it in the Realteck HD Audio Manager if it is not working! THANKS "SAM" (my Toshiba Tech Guy's psuedonym)
Hope this helps you guys

Password Manager not working with any internet browsers

I have Thinkvantage password manager installed (v. 3.20.0311.00) on my Thinkpad X201. I am running Windows 7 professional, 64 bit. Password Manager works for all programs except IE8 or Mozilla Firefox (eg. works for Outlook, works for iTunes, etc.). When browsing, the program simply never pops up. It worked previously, and I still have many saved website login details, but it never logs in for me any more and new sites do not activate the program.
I have made sure that the add-on is enabled and I have checked the box next to "enable 3rd party browser extensions" in the advanced tab of internet options. I have also tried resetting internet explorer settings. As mentioned above, this in not only a problem with IE8; it also occurs with Firefox.
Any help would be very much appreciated.
Dr_Rap

Same problem here. I just recieved mine (Win 7 pro 64 bit, X201 Multitouch) last week and password manager not working at all in ANY web browser. It recorded my .net password just fine, but i can't get it to work in IE8. Who pays this kind of money for something that doesnt work?
Fix this Lenovo!

Adobe Flash (latest) not working with any Internet browser

iMac with latest OS 10.8.3, installed Flash Player plug-in (latest). No flash videos will play in any browser (Safari, Firefox or Chrome). Based on other posts, I cleared Safari cache (deleted stored data), uninstalled Flash, and then re-installed. Still same problem.
I don't see any Preferences related to Flash plug-in in Safari or Computer Preferences.
Suggestions?

Check Adobe Support/Forums. Maybe someone else has found a fix.
Adobe Support
Adobe Forums
http://forums.adobe.com/community/flashplayer

Itunes not working with Norton Internet Security

I downloaded the new version of itunes and it only loads when I have my Norton Internet Security Disabled. How can I fix this?

hi BabySimba!
is that Norton Internet Security 2005? if so, see:
Lorraine M: NIS/itunes problem rectified
... but if it's Norton Internet Security 2006, see:
bbecker1221: Re: Itunes doesn't start up after installing upgrade :SOLUTION
love, b

Comcast Cable Internet not working with router (WRT54G), but network is fine?

My Comcast Cable Internet is not working with my router (WRT54G), but my home network is fine. The internet works without router.
I have a WRT54G Wireless-G Broadband Router from Linksys.
I was using Bellsouth DSL Internet up until two weeks ago.
I had my DSL modem connected to my router, and the router let me use the internet and share some files and printers with my laptop upstairs.
A few weeks ago we changed to Comcast cable. The technician came in and connected it himself, but only for the desktop. The internet worked perfectly, and still works perfectly on my desktop (the one downstairs). He didn't really give me any instruction or CD-roms for it.
When I tried connecting my router, the internet stopped working. It was weird because the router worked for the file sharing and printer sharing between both my computers, but the internet didn't work. Although, the light for the internet is lit on the router itself.
I even have this program called "AOL Network Magic" which shows a map of what is connected to the router, and it shows that the router and my laptop and desktop are connected, but then it has an "X" for the internet connection.
I have tried everything. I lost all of my CDs and things that came with Linksys, but I downloaded some guides from the Linksys website and it doesn't really help. I tried something called "NetSet", but after I set everything up it says my router is not compatible or something with NetSet. I read a bunch of FAQs, I tried going to comcast and seeing if they had any FAQS about it, but I can't find anything.
Maybe one of you can help me?
Also, I don't know my modem's IP address. I had it for Bellsouth, and sometimes when I would lose my connection I would go there and click on "reconnect" or something like that.
So the only way I can use the internet is to disconnect everything from my router and connect the ethernet cable directly to the modem.

You may open the web setup utility page of the router by typing its IP address on your browser's address bar. By default, it is 192.168.1.1. When you're asked for username, you may leave it blank. For password, its "admin". If in case that does not work, reset your router at the back for 30 secs and do a power cycle again, see if it becomes accessible after that...
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

WRT54G v6 not working with new Motorola SB6141 on Comcast (IPv4 and IPv6)

My WRT54G v6 not working with a new Motorola SB6141 Cable Modem on Comcast (IPv4 and IPv6).
Yesterday, I had my old DOCSIS 1.1 cable modem and the WRT54G had been working just fine for the past 8 years.
Last night, I swap in the DOCSIS 3.0 SB6141 cable modem, and now the WRT54G keeps losing the internet connection. When I go into the status page for the WRT54G, I often do not see DNS servers and sometimes do not even see an IP address.
If I connect a PC directly to the SB6141 cable modem, I have no problems whatsoever. But whenever I connect through the WRT54G and power cycle both devices, then I have internet connectivity for about an hour before it drops out. I have noticed my gateway IP address and DNS servers change at that time as well. I can also force the Linksys to lose connectivity by doing a DHCP release/renew on the Linksys status page.
Is this behavior because of the dual stack (IPv4 and IPv6) coming through the cable modem from Comcast now? Is there any way I can keep using my WRT54G v6 now that I have the SB6141 cable modem?

You just have to install it correctly.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&login=1&app=search&vw=1&articleid=3686

The expand on Youtube is not working with many Youtube sites and they work on Internet Explorer

On many of the sites on Youtube the expand does not work with Mozilla Firefox 4. I have gone to Internet Explorer and they work there. When I come back from Internet Explorer strange enough the expand on Firefox works. Obviously its picking up programming from Internet Explorer, unfortunately it does not last long. I've tried plug ins, reloading flash player after I deleted it and re-installed it, the problem still exist. Also on the expand screens that do work on the right side there is a very thin white line coming down the border. I'm not the only one with this problem. please help with this problem.

Indeed, this is a bug in HTTPS-everywhere which you can see here : https://trac.torproject.org/projects/tor/ticket/4032

We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?

We live in motel but my iMac is not connecting with the internet but my cousin has hp laptop that works perfectly fine in my room. So can you help me with this situation?

Joining an encrypted WEP or WPA Wi-Fi network

Not working with Internet Explorer?

Not sure y, but all of a sudden, a few days back, my website is not working with IE. I use Firefox and it works fine. Others I know can't view it and they click on something and it takes them to some Mac error page. Any thoughts on this? I had my wife even update her IE to 8 and restart her windows machine. nada! cheers!

I am having the same issue.
I have website for my 7th Grade class. Over the weekend, I updated to iWeb'09. Today, when my students (using IE7 tried to access the site, I noticed loading pages takes much longer and the tech guy tells me that IE doesn't work with Mobile.Me.
http://web.me.com/socialstudies8/SullivanClasswebsite/MrSullivansWebSite.html
Are there really issues with IE and Mobile.Me servers?

Satellite A215-S7444 built-in webcam not working with MSN / Skype

Hi, I've just bought my laptop and right after installing the newest MSN and Skype, the video is not working with these programs. I tried to configure the video settings inside MSN and it told that "windows cannot connect to this webcam. It's in currently in use or not plugged in". The webcam is built-in, a Chicony USB 2.0.
Any hints ??

Hi there,
maybe you should download the webcam software for your machine from the toshiba driver download site and install it. The webcam works but the software sometimes behaves really weird so you just have to reinstall it. Maybe its an good idea to uninstall the old software before...
Greetings

Satellite A300-1G2 does not work with 3GB or 4GB of memory

Does not work with 3GB or 4 GB memory, only 2 GB!
And if I plug one memory module of 2 GB in bank1 (bank0 is empty) - it's does not work too!
It's happened with 3 notebooks. (Sorry, my English is not good :) )

Did you think about one fact that the notebook doesnt support 3GB or 4GB RAM?
No?
Maybe you should check the user manual firstly which is preinstalled on the notebook.
I think you would find very important info.
Notebooks with Intel Mobile GL960 chipset supports max memory capacity of 2GB!!!
As Im not mistaken your notebook was equipped with the Intel Mobile GL960 chipset so the case must be clear now. or not?
Additionally is important to know that you have to use always first memory bank/slot (bank0) if you are using ONLY one memory module!!
Bye
I think you can assign 10 points ;)

Flash player does not work with Ie or Firefox with win 8.1?

Flash player does not work with Ie or Firefox with win 8.1 64, If i try and play a video I get the message to install Flashplayer.
If I try and install it it says it is already installed. Your onsite installer says it is not applicable to my machine.
I have followed all the normal steps re enabling addons and active filters etc.
all to no avail Pc is Dell 6 months old, Flashplayer has never worked on this machine. Last MS update mid Dec 2014.
Version of flashplayer is 15....03.......

Flash Player is a built-in component of Internet Explorer. There's nothing separate to download or install.
Firefox requires a different version of Flash Player (the NPAPI plug-in), which will be served to you if you go here: http://get.adobe.com/flashplayer using Firefox; however, there are some unique stability issues related to Firefox on Win8.1, and you're probably better off using Google Chrome if you want a more optimal experience with Flash Player.
For problems where IE isn't being detected by sites that require Flash:
First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11

WRT54G not working with Satellite internet

Similar Messages

Maybe you are looking for