WRT54G V.6 - Swedish/Danish/Norwegian type Language in setup.... DRIVING ME NUTS!!!

I was wondering how I can fix this. My brother had this router and never had any problems... he's since lost the install cd and I've inherited the router which I'm attempting to set up with a D-Link 3420 Wireless G gaming router (Xbox 360 Live).
When I go in to configure it, everything is in a different language. I managed to flash it to the latest version and reset it, but still the same problems. Does anyone know how to remedy this? I'm also not sure what language this is either.. it might be Dutch.
Thanks.

Hi!
I have the same problem, I've solve that before, and need to do it right now but I need a language file that comes in the router installation CD which I lost , If you have the original CD-ROM for WRT54G V.6.0  I will thank you if you can send me the following file from the CD  ( :\language\en_lang.bin) that will make me very happy
Before you begin the updating process please put your router configuration cd-rom in your pc drive but don't use any autorun application and connect your pc to your router (wired)
steps:
1) log into your router, if your router IP address is 192.168.1.1  then type in your browser http://192.168.1.1/language.html
you´ll get a Multilanguage page 
2) select the appropriate language, let's say english in the combo dropdown list
3) click the "upgrade button" below the "langpack version" information
you´ll get a pop up window
4) select "english"  in the "upgrade country" dropdown list
5) in the "language file to upgrade" section, click the browse combo
a standard windows file select window will pop up
6) if your cd-rom unit is identified with letter "D:" please look for the following file "D:\language\en_lang.bin"  (in not sure if the directory name is language or languageS) and select it
7) click the buttom below that says something like "uppgradera"
...wait until the router  upgrades and reboots
8) D O N E !
IMPORTANT NOTES:
Don't execute this process via wireless, please connect your pc directly to the router with an appropriate UTP patch cord
Do not turn off, reboot your router or PC while the upgrading proccess is taking place,
Do not unplug your PC from the router while the proccess is running
If you are executing this process from a LAPTOP computer, be sure that is not running on battery or the battery is fully charged before starting the upgrade proccess
If you are executing this process from a LAPTOP computer, avoid it to turn into standby mode while the upgrade situation
any of the above conditions will interrupt the upgrade proccess with unpredictable results and a recovery proccess could be necessary, such proccesses are not so simple to be explain in a forum, so be careful
I hope this message would be useful for you.  And , if you have the file I asked you for, please send it to me via e.mail or a download server like rapidshare; Thanks in advance!
Best regards
Ventech
Message Edited by ventech on 01-07-2009 07:29 PM
Message Edited by ventech on 01-07-2009 07:31 PM

Similar Messages

  • Danish/Norwegian/International sort orders

    I am submitting this in both a Java JDBC and in a Microsoft SQL Server 2000 forum else where:
    Scenario:
    We have varcahr fields in SQLServer 2000 database at 8.00.760 that are getting some odd/different results:
    Value we are trying to find is ZXYAA001
    FIrst: SELECT * FROM objecttable where name like 'ZXY%'
    Second: SELECT * FROM objecttable where name like 'ZXYA%'
    Third SELECT * FROM objecttable where name like 'ZXYAA%
    Collation sequence is Danish_Norwegian_CI_AS
    When we do the search using JDBC we get returned:
    In First we find ZXYAA001 as part of list..
    In Second we do not find ZXYAA001 as part of list
    In Third we find ZXYAA001 as part of list
    We believe this is so because in Danish Norwegian the AA is treated as A with a ring over which I believe is described as A Ring and not as two A so when looking for LIKE ZXYA% it doesn't recognize the AA as being met by the ZXYA%
    Is this what someone would expect.. Our users report it as an error but I am not sure that it is wrong based on the database language settings.
    Does anyone know of anyway I can construct that to let it find the AA as really two AA without changing database languages/code tables. Is it that we are using the % and should be using something else.
    I realize that this is probably going to be an issue for the SQL Server people and not JDBC but just thought I would take a chance... Any validation of above theories would be appreciated and definitely and solution.
    What we are wondering is there someway to change this behavior with the query or some setting in JDBC.
    Paul

    Have you tried using a prepared statement and the setString() with SQL that looks like the following?
    ....where name like ?

  • Want to buy a iphone 4 in asia, can i get swedish meny and lett, want to buy a iphone 4 in asia, can i get swedish meny and type board, want to buy a iphone 4 in asia, can i get swedish meny and type board

    want to buy a iphone 4 in asia, can i get swedish meny and lett, want to buy a iphone 4 in asia, can i get swedish meny and type board, want to buy a iphone 4 in asia, can i get swedish meny and dash board

    Why are you repeating over and over?
    Nobody can understand what you are looking for.
    Now. I assume you are looking to buy a factory unlocked iphone? You can easily to go U.K and get it from there.

  • Correct Sorting for Indices (Danish / Norwegian)

    Using InDesign 5.0.4 and generqating Index for Norwegian cities using "Danish/Norwegian" sort order.
    I now get:
    Holmestrand s.110
    Hønefoss s.111
    Horten s.111
    Jessheim s.112
    Note that æ, ø and å are distinct letters in our alphabet and comes after z, hence correct sort order is:
    Holmestrand s.110
    Horten s.111
    Hønefoss s.111
    Jessheim s.112
    As of now, å comes out right, haven't tested æ (rare letter) but ø is considered equivalent with o, it is not!
    Agnar

    Yup, this was certainly a complaint in CS3, but it isn't going to change in CS3 now that CS5.5 is the current release.
    I don't know if the problem has already been fixed in a later version or not, but perhaps one of our scandinavian users knows.

  • I added a foreign language in setup. How do I bring out its keyboard?

    I added a foreign language in setup. How do I bring out its keyboard?

    After selecting your keyboards, a globe symbol key will appear on your keyboards.
    Tap it to cycle through the keyboards you have enabled.

  • Nokia E71 Dictionary russian swedish how to type r...

    Hello.
    Nokia E71
    Application "dictionary".
    swedish>russian translation works fine.
    trying to do it vice versa russian>swedish
    Now i'm puzzled...
    How am i supposed to type the cyrillic characters in order to get the russian words translated to swedish??
    I select "russian" as a source, and "swedish" as a target, but the only languages awailable for input are: English, Suomi, Swenska.
    Please help.

    Go to Menu>Tools>Settings>General>Personalisation>Language>Phone language.
    This will show you the languages that exist for the phone interface in general. If you bought in Sweden, you would probably only have English, Finnish, Swedish, Norwegian, Danish and Icelandic.
    If you have any languages that don't use the Roman alphabet, then you'd be able to use the characters of that language by selecting it as the phone language, but not otherwise.
    The dictionary is a separate application, not an integral part of the phone software, even though it was preinstalled, so it has not affect on the performance of the phone as a whole.

  • Sales doc type language

    hi,
    can u pl explain what is the use of  OVA3 convert language for each sales doc type

    Hi,
    By default sales documents are in German language. Eg. Std sales document type in German is TA, but you can convert the same in the language you want. So, in English it is converted to OR.
    This way you convert sales doc. type in any language as per your req.
    Sagar

  • File type language issue.

    In doing a file search, I notice that my file types are not in English. Document is "Dokument", Plain text is "Alm. tekst" and Safari history item is "Emne i safaris historie". How can I correct this? Curiously how did this happen?

    Downey Drug wrote:
    Thanks a bunch. Now, why would the system do that? Just curious.
    Lots of people have reported similar things.  It's a bug in the localization system that Apple has to fix.

  • FIM 2010 R2 different type language database storage.

    Hi,
    can we store answers in turkish language in FIM 2010 R2 Database,if my database have default collation?
    Regards
    Anil Kumar

    Are you asking about password registration/reset functionality? Yes, you can. Answers are hashed during registration, so it is not a problem for a database to store it.
    I don't know exactly how turkish language is presented in ASCII, but I bet it is not a problem to whole FIM to display Turkish names and strings.
    It is not a problem for FIM Service/Portal to present polish names for example - so it is not a problem for password reset answers as well.
    If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

  • I have had Swedish as my app language, but I want to change it to English (international). I've unistalled the apps, and when I'm trying to reinstall the apps I receive error messages.

    What can I do to make it work?

    Does it only do this when plugged into the charger?  If so, unplug and see how it works.
    If not, follow the Standard Troubleshooting...
    1. Remove apps from the Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    2. Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    3. Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    4. Restore with your backup.
    5. Restore as new, i.e. without your backup. See how it runs with nothing synced to it.    You may need to try DFU mode (Google for it).
    6. If still a problem, it's likely a hardware issue.

  • Wrt54g - no wired connection - cannot find ethernet port upon setup, cannot get wired connection

    I've had my wrt54g router for a little over 1 year.  I had to get support to set up the router initially b/c it could not find the ethernet port when I tried to set it up initially.  I am past that date and recently had to move the router and the PC.  When I tried to redo the setup same issue - i upgraded the firmware and same issue.  If i uplug the router and plug the cable directly from the cable modem into my pc, everything works well, but when i try to set up a wireless connection, the wired connection goes down, but the wireless connection works and i cannot get the wired connection back up.  i am a novice with the device, so any detailed help in trouble shooting the problem and getting me back up on both a wired and wireless basis would be appreciated. 

    As you upgraded the router's firmware,I would suggest you to reset the router for 30 seconds and configure the router from the scratch.Make sure that the Modem is connected to the router on the internet port and the computer to the router on the ethernet port.
    Also check the ip address you are getting on the computer hardwired to the router...Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
    IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
    If you get 4 replies then,try to open the setup page..

  • Creation of inspection type (mm02 insp.setup) in mass

    Hi All,
    Is there a way of creating inspection type for all materials via mass update.
    It is in the Quality management view of mm02.
    Thanks
    Venkat

    Hi
    Try to use trx MASS
    Max

  • Default PLD language in setup

    Hi,
    When Canada localisation is used, the default language for the PLD templates is French, even if the base language is indicated as English.
    Please fix this so that the PLD template language is determined by the base language selected.
    Thank you,
    Heather

    Can you take a photo of the BIOS screens and post them here?
    Otherwise, take a look at the BIOS screens and look for the word Sprache. That is the German word for language.   The word for English in German is Englisch.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Multi Language Support Setup

    Hi Gurus,
    We have currently upgraded from 11i to R12.1.2 and we have decided to USE MLS & NLS(Multi Language Support) for the very 1st time.We have 4 Languages (American,Spanish,French,Portuguese) so when we query for data in tl tables(apterms_tl,ra_terms_tl,fnd_responsibility_tl) we get four records for a single term_id because we are using 4 languages so we need to keep a language join. What I am doing is
    Select * from ap_terms_tl where agent_id = 5 and language = USERENV('LANG'); which returns only one row with US as the language. Here is a sceneario where I am struck I want to see data in a different language like Spanish or french or Portuguese so how can i achieve that. what i am trying to do is
    ALTER SESSION SET NLS_LANGUAGE = 'BRAZILIAN PORTUGUESE'; and then querying for
    Select * from ap_terms_tl where agent_id = 5 and language = USERENV('LANG'); i get data in Portuguese. How can we achieve this from user level perspective. like when we register a Canadian USER and he wants to see American and vice -verse.
    here are the profile options for NLS & MLS
    PROFILE_NAME USER_NAME
    ICX_DATE_FORMAT_MASK ICX: Date format mask
    ICX_DATE_LANGUAGE ICX: Date language
    ICX_LANGUAGE ICX: Language
    ICX_NLS_SORT ICX: NLS Sort
    ICX_NUMERIC_CHARACTERS ICX: Numeric characters
    ICX_TERRITORY ICX: Territory
    I tried setting up these profile Options but didn't work. I am struck Here(like where to set these profile options to make the MLS work).Let me explain the sceneriao
    Here is what we are trying to achieve When a user from Canada login into Oracle Applications and runs a request set or a concurrent Program he has to see the output in Canadian Language Responsibility this should be done dynamically(changing the Language). You have give me a scenario like changing the preferences and setting the session languages can we dot it dynamically like as soon as the user logs in from Canada his session Language should be set to Canada Language.
    I am just waiting for some help from the gurus.
    Help would be highly appreciated.
    Thanks & Regards
    Krishna
    Edited by: user12156300 on Mar 11, 2010 9:29 AM

    Hi Hussien,
    I able to see the languages in the tables and when i alter the session and I able to see the data in that particular Language.Even i log-in into oracle applications and click on Preferences and change the session Language Other than US i can see the screens in a different Language.Is there anything we can't do dynamically instead of user signing into Oracle Applications and change his session Language.
    Like when the user logs-in from Canada then he can automatically see his country language.
    Thanks & Regards
    Krishna.

  • I cannot get past the Language selection setup.

    I cant scroll up or down through the languages, but apparently i can reset the ipod by holding the middle button and the menu button. So i am confused on why i cant even click the middle button to choose English.

    If none of the 5 R's are able to resolve the issue, it's likely a hardware issue, meaning you'll need to have the iPod serviced/replaced either by Apple or a third party service. The clickwheel needs replacing.
    http://www.apple.com/support/ipod/five_rs
    It might help to let the iPod's battery fully drain first and then charge it back up as well before and after working through each of the 5 Rs.
    B-rock

Maybe you are looking for