WRT54G Ver 6 Internet connectivity problems

Alright so here's the deal.
I'm on Windows XP with Verizon DSL (in Orange County, CA) that uses a Westell modem (just modem, not modem and router combo).
I have the old Linksys BEFSR41 v.2 router that runs with everything fine.
I just bought the WRT54G Version 6 and connected everything up as needed.  Powered things down and then back up.  And it could not detect an Internet connection, but I could access the router via web browser.
- Ran the Setup CD and it couldn't find the internet.
- Upgraded the firmware.
- I searched the forums and did not find a successful solution.
- Called my ISP to confirm it is DHCP.
- Talked to Linksys Support via phone and he had me do all sorts of stuff.  Releasing, Renewing, Local IP Address changes, pinging, MAC, etc.  All this to try to get some sort of IP address with the internet.
- Tried it with a diff WRT54G Ver 6 (Yeah.  I bought two.  One for me, and one to bring to my parents), and it still didn't work.  (Can't be that both the routers I got are defective.)
- Searched forums some more and ran across the EasyLink program.  I used it, and it tells me my freaking Wired adaptor is disabled.  Where do I enable it?  Can't be my computer because it all works fine with the old Linksys router I got....or could it?
- Powered down and back up in many different combinations.
Did all that to no avail.  Anyone got a solution?  I couldn't find anything that worked.  I'm about to go return this and get something else tomorrow.  Maybe if I wake up, there will be a workable solution that is replied back.
Thanks in advance to all those that tried to help and posted something, or didn't post due to having no solution.
- Chris

Yup Yup Yup.  I tried the WAN address thing and it still didn't work.
I was about to pack everything up and go return the stupid thing.  BUT.....I decided to talk to Verizon DSL support since I hadn't tried that.
They helped me out good!!!
Here's the solution.
I plugged in the old router, the BEF, and went to Status to click the DHCP Release.  Then unplugged the old router.
Then per Verizon DSL support instruction....powered down the modem, then powered it back up and waited for lights to stabilize.  Then I plugged in the new router, the WRT.  And went to Status (IP was already autofilled, with internet working) but I still clicked DHCP Renew.
It all works.  WOOOOOO!!!! 
By the way.  The WAN address thing is important.  I went to it on the new, WORKING router and disabled the WAN address.  The internet stopped working.  I re-entered in the WAN address I copied and the internet worked again.  So......yeah. 
I hope for all those out there having the same problems as me, and without a solution, see this thread and try this.
Thanks again for your guys' help.
**edit**
By the way.  Is there a way to stop my internet to being a stickler to this MAC address?  I'm just curious.  I'm gonna go google MAC address and see if I can read anything useful. 
Message Edited by MavLy21 on 02-14-200710:51 AM

Similar Messages

  • Bizarre WRT54G, DDNS, internet connectivity problem

    The other day, we lost power at home (my cable modem and router are not on a UPS - they will be shortly). The problems started soon after that (it can't be a coincidence, but I'm stumped as to how they are related). After everything powered up, we could no longer connect to the internet from any machine on the network. When I checked the WRT54G however, I found that it was connected to the outside world and had a valid IP from my ISP. Poking around from outside my network (at work, for example) showed me that if I try to connect to my web server, I instead am routed to the router setup page (I have remote config turned off and port forwarding on, and it has worked flawlessly in the past).
    Further investigation showed that my DDNS service (TZO.com) was not working (the error message is "Connect to server fail"). I double-checked with TZO and they do not see an issue on their side.
    Any ideas for further investigation? I'm stumped at this point. I'd almost say the power problem fried the router, but if it did, it seems to be an awfully selective frying. Thanks in advance, and please let me know if there's additional information needed to help.
    My setup:
    Time Warner Roadrunner cable modem (not sure of the type/model)
    Linksys WRT54G router, firmware 4.21.1
    TZO.com DDNS service
    Solved!
    Go to Solution.

    Well try upgrading the firmware of the router & keep on holding tightly the reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!

  • RG54G2 Wireless Router Internet Connection Problem

    Hi,
    (apologies for the long message - trying to cover all details - summary: wireless router often drops internet connection)
    I recently bought an RG54G2 Wireless Router, a CB54G2 PCMCIA Wireless card and a D-Link GWL-630 PCMCIA Wireless card.  In addition to two laptops connected to the wireless router WLAN, I have two PCs (one Win WP Pro SP 1 and one Win98SE) connected to the router via wired LAN.  I also have a SurfBoard SB3100 Cable Modem connected to the WAN port (this connects to my ISP -  Optusnet (Australia) via DHCP).
    The problem I have is that the internet connection is disconnected many times a day (often every few minutes, sometimes an hour or so).  I am able to reconnect by resetting the wireless router via the wireless router configuration page.  When the internet is disconnected I am still able to access the computers on the LAN/WLAN (via Windows Explorer and Ping), I am also able to ping the router and the Cable Modem, but nothing outside of the cable modem.
    Also, when the internet is disconnected the System Status page indicates that the router is still connected to the internet, and the Diagnostics page passes the Test Connection test, though no external pings work.
    I did not have this problem when the cable modem was connected directly to the Win98SE PC (and other PCs via ICS).
    I have disabled the WLAN and the problem still exists with only the wired LAN.
    I have changed numerous settings in the wireless router config page with no success (eg disabling DHCP and setting each IP address, minimising LAN and WLAN speeds to 10 and 11MBps plus others).
    I have upgraded the wireless router firmware to R1.0.6.0 (no change to the problem).
    Searching on Google I have found several other cases of routers with unstable internet connections (none refering to the MSI routers), but none had solutions that helped my situation (most replies suggested updating the firmware).
    Any suggestions of how to make the router internet connection stable?
    Thanks,
    Mike

    maybe this is the FIX 4 wireles router internet connection problem
    please let me know if any one fix the problem with this tips
    thankz
    M. B.      Feb 6 2004, 8:20 am     hide options
    Newsgroups: comp.os.ms-windows.networking.windows
    From: "M. B." - Find messages by this author
    Date: Fri, 06 Feb 2004 16:20:48 GMT
    Local: Fri, Feb 6 2004 8:20 am
    Subject: SOLUTION to my router loosing connection to Windows XP
    Reply | Reply to Author | Forward | Print | Individual Message | Show original | Report Abuse
    I am happy to report that after 8 days of constant battles, reboots, phone
    calls, cable pulling, router changing, it seems that I finally have found a
    combination that has had me using Verizon DSL account for over 12 hours so
    far without any kind of interruptions.
    Since so many of you tried giving me comments and suggestions, I felt that
    it is necessary for me to post this here so that the next person will not
    (hopefully) need to go through this hell as I did!
    My original problem was that when after I purchased a D-Link Wireless Router
    DI-624, I would get disconnected from Verizon DSL at least once every 2
    hours or so. My internet access would "freeze" and then a little popup box
    at the bottom right system tray would tell me that the "LAN cable has been
    unplugged".   After about a minute or so, my internet connection would be
    back working   This was NEVER happening during the 2+ years I was using my
    Westell modem alone (running in router mode).
    Please keep in mind: The problem I was having was not wireless related as
    it was happening to the desktop computer to which the router/westell was
    connected to!
    During these last 8 days, I tried: one DI-624 wireless router, two Netgear
    614v3 routers and two Linksys WRT54G v.2 routers. In addition, I received a
    brand new Westell 2200 modem from Verizon.   I also tried about four
    different CAT-5 cables. Here is the final outcome:
    I have the Linksys WRT54G (version 2) wireless router connected to the
    Netgear Fast Ethernet FA310TX network card in Auto-Sense mode (using the
    built-in XP drivers, as Netgear told me that there was never a newer
    revision released). I have DISABLED the built-in 3Com Gigabit LOM (3C940)
    network card (via the ASUS P4C800 Deluxe motherboard BIOS), DISABLED the
    Zero Wireless Configuration service, and have put in the IP/Gateway/DNS
    address numbers inside my Windows XP Network Connections | LAN setup. My
    operating system is Windows XP Pro SP1 and the modem is a Westell 2200
    configured as bridge only.
    If my situation continues to be stable, I *might* try to go back to the 3Com
    built-in card (disable any power management) and then re-enabling the Zero
    Wireless Configuration services. But in reality, I am happy with the way
    things are and have already spent enough time trying to get my router to
    work with Verizon DSL without having it drop connections!
    Now, the next step will be setting up the WIRELESS part of this. I don't
    even yet have a laptop with me on the premises, but the 802.11g card that I
    already have is the D-Link DWL-G650. I hope and assume that this will work
    okay with the Linksys...
    One thing I must say is that I never realized that how many problems other
    users are having. I would have thought that since 802.11x has been around
    in the mainstream by now 2+ years, that things would have been much more
    "system friendlier".   And again, my issues were not even WIRELESS related.
    All 3 tech supports were not really helpful, as none of them realized that
    the problem is somehow between the router and Windows XP (Ethernet card?)
    loosing a connection, which of course results in Verizon DSL loosing the
    connection also.
    One other comment about the Netgear 614 v.3 router: A number of people have
    responded to tell me that they have had this random "router resetting"
    happen to them (where the routers behaves as if someone turned the power off
    and then back on, and the lights flash) just as if you first turn it on). I
    was lucky to witness it myself during one of the "disconnects" that I had.
    This was actually the reason why I went back to try the Linksys one more
    time. So, I would definitely recommend staying way from this 614 (version
    3) model.
    Once again - THANK YOU everyone!

  • When is Apple going to fix Yosemite's internet connection problem

    Is Apple going to fix Yosemite"s internet connection problem?

    Nobody here knows any more than you do about what Apple is going to do. If you want help from other end users with your problem, you'll have to describe it in more detail.

  • Omni 10 mostly internet connection problem, also difficulties responding generally

    Dear all,
    For two weeks now i am proud owner of an omni 10 tablet. However, i already encountered some problems like the loss of the audio System, which was luckily restored with the help of the hp support via telephone.
    Unfortunately, my tablet is not properly connecting to the internet since yesterday. It also has problems opening PDF files with 'adobe read', deleting or newly creating appointments in the challenger app and foremost it sometimes does not open the settings section depite repeatedly tapping on its button..
    Most important currently is the internet connection problem. Is connects but says at the same time that the connection is limited. Additionally, it does not offer any solutions to this. That happend with three differend routers so far..
    I hope you can help me
    Greetings

    The only thing I can suggest is for you to follow as many steps in this document as you can: Troubleshooting Wireless Network
    *** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
    If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

  • How to resolve this: Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode.

    Keep getting this message while using Gmail "Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode. "
    I have to use the older version of gmail for it to work properly.

    now i cant even send emails out of gmail, except when using the older version.

  • I have updated all of my plugins and still cannot get any videos to play i get either an error message or internet connection problem message and my internet is working fine

    videos have stopped playing on firefox, i get an error message on youtube, facebook and on netflix i get an internet connection problem, i have no problem with my internet connection, i have updated all of my plug ins...what has happened

    If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
    iPhone and iPod touch: About backups

  • Some Gmail features have failed to load due to an Internet connectivity problem.

    This error message comes up both using Firefox and Chrome when using G mail. Also if it works at all,
    switching from compose to draft just takes very long or keeps working.
    No problem with G mail using Internet Explorer or Safari.
    I have used Firefox for many years & want to go back when I can solve this Vexing problem.

    Thank you for your help.
    I reset Firefox, re started and wanted to answer using G mail with Firefox,
    and the same error message comes up.. When it does the screan gets
    very lite with the error message on top.
    '''''Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, or using the basic HTML version. Learn More.'''''
    I am now using Explorer to send this!
    Sy

  • Has anyone experienced internet connection problems through Comcast after taking a recent Apple security download?

    Has anyone experienced internet connection problems through Comcast after taking a recent security update download from Apple??

    Hello jessie029, and a warm welcome to the forums!
    What browser do you connect with?
    Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then Open System Preferences>Network>Configure>Proxies Tab, make sure none are set, like for HTTP & HTTPS to use at Home, if you use it at 2 locations, just make a New Location for home.
    Make a New Location, Using network locations in Mac OS X ...
    http://docs.info.apple.com/article.html?artnum=106653
    Then try putting these numbers in Network>TCP/IP>DNS Servers for the Interface you're using...
    208.67.222.222
    208.67.220.220
    Then Apply. These are safer/faster than most ISP's DNS numbers, and have been patched against DNS poisoning.
    https://www.opendns.com/homenetwork/start/device/apple-osx-tige
    How to Flush DNS in Mac OSX using the Terminal.
    In Mac OSX versions 10.5.1 and before, the command lookupd -flushcache performs this task:
    lookupd -flushcache
    Reboot.

  • HT1657 get money back on a movie because of internet connection problem

    I rented a movie but i had an internet connection problem, now after 24 hours it is fixed but my movie has expired. Can I get my money back ?

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • Internet connectivity problems. Conflicting IP address?

    For the last few months I have been experiencing significant internet connection problems on my mac mini. Although at times my connection is ok, the majority of the time I'm suffering from what would best be described as an "intermittent" internet connection. It seems that my internet connection is constantly cutting out for short periods of time before re-establishing itself.
    I'm connected to the internet via a wireless network (netgear router). There are also two windows machines (one laptop and one desktop) and a PS3 connected on the same network (also occasionally there is a macbook connected to the network too).
    I've been with the same ISP for over a year now and previously had always experienced a good connection, also all the other devices connected on this network seem to have fine connectivity so I doubt there is any problem with my service provider.
    It could be a coincidence but the emergence of the problem seems to have conincided with my flatmates purchase of a laptop. When my flatmate first connected his laptop to the internet I received a message on my mac mini stating there was an IP address conflict, although I have not had that message again and I seem to suffer from bad connectivity at all times, not just when my flatmates laptop is turned on! Could these to issues be related?
    I'd be very grateful for any advice on how to resolve this issue as it's getting to be a very significant problem, thanks in advance for any replies...

    Also try using the open dns servers instead or your ISP's. System Preferences>Network. Advanced>DNS. Click on + and add the following: 208.67.222.222 and 208.67.220.220. Hit Ok,then Apply.

  • OSX Mavericks having internet connection problems.

    Just updated to OSX Mavericks on my early 2011 MacBook Pro, and it's having internet connection problems. I'm using wi-fi, and so far only Firefox and Mail will connect. All other programs (such as iTunes and App Store) won't establish a connection. This is a problem that only started after I installed Mavericks. What can I do to fix this? Thanks in advance.

    App Store / iTunes Store relies on Safari settings if you can't access secure sites from Safari then they won't work...  Reset Safari  and make sure Block Cookies Setting is not set to Always.  You can also try to create a new user and see if it works there to help isolate the issue.

  • Internet connection problems with OSX 10.10.3

    Does anyone else have very bad Internet connection problems after downloading OSX 10.101.3?  Does anyone have a solution? P.S. What do you think of PHOTOS, after Aperture?

    1, No problems here with internet on 10.10.3
    2, No solution
    3, I think that Photos is a toy. Apple has basically neutered both Aperture and iPhotos with their efforts to make their desktop solution match the iOS solution.
    I am currently looking for a non-Apple solution for my photographic needs since Photos in no way shape or form is able to fill my needs.

  • Just one month before i bought iphone 5... but the iphone has the internet connectivity problem... while a iphone 4s is cathcing 3G tower, whereas iphone 5 is catching 2G network only.... I've tried so many things to get recovered, but alas

    Just one month before i bought iphone 5... but the iphone has the internet connectivity problem... while a iphone 4s is cathcing 3G tower, whereas iphone 5 is catching 2G network only.... I've tried so many things to get recovered, but alas, nothing is workable- such as- restaring the iphone, reseting the networks etc... Please help me out from this problem..

    to be clear, my phone works fine when not in motion in a vehicle.  If I pull over and come to a complete stop, remaining in the car, my phone works.
    And while the phone is not working when I'm in motion, an internet search or a text message will go through, but I can not use Siri or any voice assistance when doing the text message or internet search.  The microphone is greyed out.
    So this is a unique issue, which appears to be the iPhone and not Verizon.

  • Persistent internet connection problems.

    Every 8 months I get a spate of internet connection problems that last for a few months. (Meaning I get relief for two months at a time, and bad service for two months). When the previous bout of internet connection issues happened I was fortunate enough to get a good technician who showed me how to reset the connection at the fios box at the entrance to my home, by unplugging the backup battery, unplugging the connection box and then reconnecting the battery and plugging back in the connection box. The technician had remarked that there were problems with the main fios connection system to the townhouses, and somehow that got fixed.
    This time I have not had as much luck. The technicians on duty have had me reset the cable router (which isn't the problem) and even replace the cable router (also not the problem). Fortunately I have remembered the previous technician's solution and am doing that every three days, without contacting technical support since they have proven useless at this time, only continuing to have me get new routers that do not even connect without the previous steps.
    How do I get Verizion to bother to listen to me? At this time I am really wishing Cox was in my neighborhood, since I was able to go at least eight months straight without problems from them. 
    I am hoping that this causes someone to check on this problem. You had a good technician on technical support once, but  not now.
    By the way - this has been going on for over two years.

    AtrixWolfe
    Since we haven't heard back from you or have received a form submission as requested in your private support case, it appears assistance is no longer required. If you need any future help with your Verizon service, please make a post here on the forums so we can assist.
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Maybe you are looking for

  • Borderless printing from Windows 7 64 to a shared printer on XP Pro system.

    I recently bought a new dv7 HP laptop with Windows 7 64 bit to replace a Dell laptop running XP.  The XP laptop and other XP systems can print to my HP PSC2410 connected to a XP pro system fine.  The XP systems can print both 8x10, 5x6 or 4x6 borderl

  • Resource consumption in different bucket

    Hi all, we have some planned orders which are created by optimizer and they have start date and end date are in different bucket then the total resource consumption is showed in the bucket where start date of the order fall. that means actually there

  • Safari pdf zoom gesture fails

    Hey, Just a comment on features that stop working. After 'some' time I find that the pinch gesture that zooms pdfs inside a safari window just stop working. The only way to fix it I believe is a restart of safari. That is all. thx

  • NAVM / NAVS condition type Use

    Hi Experts, If i am using NAVM/ NAVS condition type in Purchase Pricing Procedure. While creating PO with these condition typeu2019s price is not added to net price. But when I post Goods receipt for PO, condition type value hits the inventory. Can a

  • I would like an RGB Curves adjustment.

    I switched from Aperture 3 to Lightroom 3 for the ColorChecker Passport integration, but I really miss the RGB Curves in both Aperture 3 and Photoshop. I've been using Curves in Photoshop for years. I really wish there was one in Lightroom 3. If anyo