WRT54G2 V1 default gateway offline at seemingly random..
I use a WRTG54G2 version 1 router and had some internet problems before after I started using Windows 7, but thought I had it fixed by uninstalling AVG Free and doing a dns flush.
But just now twice in a row my internet connection failed again.
Some facts:
-Removing the internet cable in my PC and putting it back in fixes it.
-Disabling and re enabling the Realtek Driver fixes it.
-Windows 7 troubleshoot finds nothing, but Windows Live Messenger says my default gateway is offline.
-The one other PC (with XP) in the home network is not affected.
-I can not even access my router through my browser.
-I don't see anything wrong when I use ipconfig in cmd.exe (could be wrong)
-Screaming and crying does not fix it.
-Network map feature in Windows 7 has never worked even when I have internet.
-I have an Asus motherboard, so no Nvidia Nforce.
-Powersave for the Realtek driver is turned off.
It seems there are no driver or firmware upgrades for this router on this site, is this correct or did Cisco misplace them on the site?
I also made a screenshot of the ipconfig /all command in command prompt when my internet failed.
Message Edited by captain kid on 12-17-2009 02:34 PM
1. It's an "ethernet cable" not an "internet cable".
2. What you write sounds more like a computer problem. If you disconnect the connection either through the driver or by pulling the cable it reconnects again. You have another computer which works fine. You should try a different port on the WRT but I guess it makes no difference.
As uninstalling antivirus helped somewhat it could be malware on your computer. Malware and antivirus usually don't place nicely together on a computer.
Otherwise I would say it could be either the switch in the WRT or the port on your computer being slightly off the spec. Which one it really is is difficult to find out...
3. There is firmware on the US server:
07/08/2009
Ver.1.0.04 (Build 5)
Download 1.71 MB
But it's for US models. It may or may not work well with your router. I also kind of doubt that it will fix your problem.
Similar Messages
-
help me please. The internet keeps connecting and disconnecting.
Sorry i did not get your issue..........
Please post the Model number of Linksys device & also the Internet service provider details ..... -
Ran my profile manager to create a second user profile for work and noticed there were a ton of profiles in there. all with seemingly random hashes, they all finished in |....hat| not sure what to make of it.
Marcelo,
I've been trying to load hundreds of pictures onto an SD card for digital photo frame and have the exact same problem. This also happens with a USB flash drive.
Found a solution - stuff the files - copy the stuffed file onto card and unstuff at destination. Give it a try - would love to know if it works for you as well. -
When viewing most text on most websites, it displays properly. However, there are two instances where text will either tend to, or consistently, become jumbled into a mess of seemingly random characters. Oddly enough, these seemingly random characters are not, in fact, random. The same weird character will be used to replace the same regular English text character consistently across the entire area that has been jumbled.
The two instances where this tends to occur most often, or consistently in some cases, are, first, when a paragraph or particular section of formatted text contains special characters, such as Chinese or Japanese characters, or accented letters. When this happens, usually the paragraph that contains the special characters is completely jumbled, while the rest of the text on the page will have intermittent jumbling on a word or two. Most often, the word "the" is jumbled in this case.
The second instance where this happens is when a website uses specially formatted text in some form or another. I, not being an expert at web development, am not sure what kind of formatting causes it, but I can provide consistent examples in lieu of my experience:
- Example 1:
[http://img408.imageshack.us/img408/9564/firefoxcharencodingissu.jpg]
Example 1 shows a portion of a screen-shot of the website "Joystiq.com". Every single article title on the front page of this blog is consistently jumbled, while the text of the article itself remains untouched. Please note that when this jumbled text is highlighted, it is visible un-jumbled in the right-click menu as well as in the source code of the page. Other consistent instances can be found within many search fields on various websites. For instance, the search bar located at the top right of "Kotaku.com" consistently displays jumbled characters both on its default text of "Search" and on any text that is typed into the search box itself.
- Example 2:
[http://img822.imageshack.us/img822/9564/firefoxcharencodingissu.jpg]
Example 2 shows both the jumbling of the paragraph containing the character "☆" as well as the subsequent peppering of the rest of the article's text with small jumbled words. Below this is the DOM Source of the selected text which shows how the text itself is being rendered properly within the site's source. Additionally, for convenience, I have edited on to the bottom of the image a small snippet of what the search bar on the same page looks like. Notice how the grayed-out text that normally would read "Search" is instead jumbled.
This issue has been plaguing my browser for the past year or so, and I had hoped that it would go away with subsequent Firefox updates. It has not gone away.
Thank you for reading! Please help!This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica<br><font face="Helvetica" size="25">abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ</font><br>
Helvetica Neue<br><font face="Helvetica Neue" size="25">abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ</font>
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page.<br />
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps -
My Final Cut Pro render files seem to end up in seemingly random locations.
I find my Final Cut Pro render files seem to end up in seemingly random locations on the HDD. for example, they will appear in a sub-folder of an unrelated project. I would like my render files destination to be in a sub-folder for the project I am working on. How do you tell Final Cut where to put the render files? Can't figure it out.
By default they are put inside your scratch folder, so if you change the scratch disk and forget to change it when you switch to a different project, your render files will be put inside the other project's scratch folder.
You can change this by going to Final Cut Pro > System Settings. If you click the Set button below your current scratch disk (not the one next to it) you can assign a second location just for the video / audio renders if you desire (this must be on a different disk though). -
Default Gateway doesn't work when entered in address bar
I'm trying to get to my router's settings. The default IP address of my router (192.168.1.1) doesn't work when I enter it in the address bar. Neither does the Default Gateway that I got from clicking on start, run, typing cmd and then ipconfig/all. Does anybody know how I can access my router settings without resetting it?
That seems to be the modem default gateway... is your PC connected to the modem via a USB cable? (sometimes that might be the case)... or what port of the router is your modem connected to?
-
WRT300N - Default Gateway issue
I'm using a wireless internet connection for my laptop and when I tried to connect to the internet earlier I got an error telling me that my default gateway was offline. I unplugged everything for 5 minutes and it still didn't work so I typed the default gateway address into the bar and it wouldn't even load (I got an error page). When I went into cmd and typed ipconfig/all my default gateway IP wasn't even listed. How do I get this back online?
Message Edited by Mandie on 01-06-2009 03:24 PMIf you don't have any computer connected to the Internet throught the router is highly possible that you have lost the configuration on your router...You should re-configure your router...
If you have a desktop connected to the router fine, else connect your laptop to ethernet port 1 on the router...Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this
If your Internet Service Providor is DSL follow this -
Default gateway arp lookup failed
Hi there
On a 5500 series WLC I see I have an issue where peap clients get randomly disconnected with these errors
MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:444 Max EAPOL-key M1 retransmissions exceeded for client 24:77:03:35:79:34
AAA-6-ARP_LOOKUP_FAIL: radius_db.c:3232 Default gateway arp lookup failed.
aaaQueueReader: Aug 31 19:12:14.938: %AAA-4-RADIUSMSG_SEND_FAILED: radius_db.c:3567 Unable to send RADIUS message to
Any ideas?
Thanks
Naresh
Sent from Cisco Technical Support iPhone App(Cisco Controller) >show wlan 1
WLAN Identifier.................................. 1
Profile Name..................................... SSID1
Network Name (SSID).............................. SSID1
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Enabled
Network Admission Control
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ i_wifi
Multicast Interface.............................. Not Configured
WLAN ACL......................................... unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Enabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver (best effort)
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Drop
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ 1.1.1.1 1812
Authentication................................ 1.2.1.1 1812
Accounting.................................... 1.1.1.1 1813
Accounting.................................... 1.2.1.1 1813
Dynamic Interface............................. Enabled
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Enabled
PSK..................................... Disabled
CCKM.................................... Enabled
FT(802.11r)............................. Disabled
FT-PSK(802.11r)......................... Disabled
FT Reassociation Timeout......................... 20
FT Over-The-Air mode............................. Enabled
FT Over-The-Ds mode.............................. Enabled
CCKM tsf Tolerance............................... 1000
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
H-REAP Local Switching........................ Disabled
H-REAP Local Authentication................... Disabled
H-REAP Learn IP Address....................... Enabled
Client MFP.................................... Optional
Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Mobility Anchor List
WLAN ID IP Address Status -
Default gateways and zones in a multihomed system
We do have some problems concerning default routes and zones in a multihomed system.
I found several posts in this forum, most of them referring to a domument of meljr, but my feeling ist that the paper is either not correct or not applicable to our situation?! Perhaps somebody can give me a hint.
Let me sketch our test environment. We have a multihomed Solaris 10 system attached to three different DMZ's using three different network adapters. We set up two local zones with IP's of the DMZ's of adapter 1 and 2, leaving adapter 0 for the IP of the global zone.
Now we set up default routes to ensure that network traffic from the local zones is routed in the corresponding DMZ's. That makes three different default routes on the global zone. On startup of the local zones, netstat reports the expected default routes to the correct DMZ gateways inside each zone.
Now what happens... My ssh to the global zone sometimes breaks. When this happens, no pings are possible to the IP of the global zone. Meanwhile, pings from other machines in our network (even from different subnets) might produce replies, some don't. By now, I can't tell you if there's is anything deterministic about it... More interesting: the local zone connections aren't affected at all!
So we did some more testing. Binding an IP address to the DMZ interfaces where the zones are tied to makes no difference (we tried both, with or without dedicated addresses for the adapter in the global zone). So the setup we're using right now is made of 5 IP addresses.
IP1, subnet 1: adapter 0, global zone
IP2, subnet 2: adapter 1, global zone
IP3, subnet 2; adapter 1. local zone 1
IP4, subnet 3; adapter 2, global zone
IP5, subnet 3; adapter 2, local zone 2
In the global zone there are three default gateways defined, one in each DMZ subnet. Inside the local zones, at startup you'll find the corresponding gateway into the DMZ. Everything looks fine...
I opened five ssh connections to the different IP's. Now what happened... After approx. half an hour, the connections to two IPs of the global zone (adapter 0 and adapter 1) broke down, while the connections to all other IP's were still open. This behaviour can be reconstructed!
So perhaps anybody has a explaination for this behaviour. Or perhaps anybody can answer me some qustions:
1. How are the three default gateways handled? Is there still some kind of "round robbin" implemenation? How can I guarantee that network traffic from outside isn't routed inside the DMZ's without preventing the local zones from talking to each other (actually we only need to communicate on some ports, but the single IP-stack concept only gives us all or nothing...).
2. If I do a ping from local zone 1 to the default gateway of local zone 2, this route is added as additional default gateway inside local zone 1! So does this mean, the routing decision is made only inside the global zone not taking into account where the packet is sent from?
3. After all, how are the IP packets routed from the different zone and the global zone, and how are they routed back to calling systems from the various DMS's and other networks, routed via these DMS's???
The scenario seems to be covered by http://meljr.com/~meljr/Solaris10LocalZoneDefaultRoute.html, but configuring the machine like stated in the paper leaves me with the problems described.
I'd be happy for any helpful comment!you can have multiple gateway entries in deafultrouter file but the default gateway for global zone can be only one but you can specify different gateways for different zones..
using this default gateway, you should be able to connect via different network...! -
Can't find the option to disable "Default Gateway" of a VPN.
Whenever I try to go to the "Networking" tab of a VPN connection. I get the following error.: "Unable to allow the editing of networking components at this time because they are currently being modified elsewhere" This prevents me from
disabling the default gateway of a VPN. Any help is greatly appreciated!Whenever I try to go to the "Networking" tab of a VPN connection. I get the following error.: "Unable to allow the editing of networking components at this time because they are currently being modified elsewhere" This prevents
me from disabling the default gateway of a VPN. Any help is greatly appreciated!
I have got the same issue using Windows 10 Insider Preview build 10074, please could somebody show us an alternative method to disable the use of the remote default gateway through a VPN ? Thanks.
Edit - From that post : https://social.technet.microsoft.com/Forums/en-US/709f9e02-d903-41a8-b5f8-d0f46d4685bf/how-to-disable-default-gateway-remote-in-vpm-with-windows-10-tp-10049?forum=WinPreview2014General
it seems to be possible to use a PowerShell command to modify this option, by setting "RouteIPv4TrafficOverRAS" to "False" instead of "True" (which is WIndows Default), but I do not know how to do that. Could somebody explain -
Cisco 4000 & 3000 series ip route & ip default gateway
Dear all ;
I have Enterprise Network Contain :
- Foundry Big Iron work on layer 3 , and Combination of 4000 and 3000 and 2000 cisco switches work on layer 2;
management network for the switches is 192.168.100.0
Foundry Big Iron is 192.168.100.1
i use ip default-gateway 192.168.100.1 on all cisco switches.
all other subnets route through the foundry.
but when i ping from any subnet (192.168.15.0) to any 3000 or 2000 switches series it replay and when i ping to 4000 series it don't replay.
when i use default route command on 4000 series it replay.
i need some explanation
Kind RegardsIn the original post it describes the Cisco switches as operating as layer 2 switches and I assume that in terms of how they are configured to forward traffic all the Cisco switches including the 4000 are configured only for layer 2 forwarding. But with IP routing enabled (as seems to have been the case on the 4000) the behavior of the switch becomes a bit different. In particular is the difference in how you identify the default route. For a switch that is layer 2 only you use the default-gateway command (which apparently worked fine for the 2000 and 3000 switches). But when you enable IP routing then the switch does not use the default-gateway to learn its default route and would look for some other mechanism to learn its default route. I am assuming that there was not any other mechanism and so the 4000 basically did not have a default route. When you configure no ip routing (which was good advice from Paul) then the 4000 stops working as layer 2 switch and at that point will use default-gateway to determine its default route.
HTH
Rick -
Am having trouble with maintaining a stable wireless network via the Time Capsule. Am running 1 Mac and 3 PC on a Time Capsule wireless in bridge mode connected to a Verizon wireless router. Verizon wireless is turned off and the Time Capsule seems to be staying connected to the Verizon router. When any of the connected computerss goes to stanby, they often report the internet is no longer available. The PCs say the default gateway has changed ans the Mac simply reports the network parameters have changed. What do I need to do to the Time Capsule to stabilize the wireless network?
It is unlikely that the gateway changes.. but anything is possible.. sorry I am not in the US.. is your service adsl or cable?? What sort of lease time does the public IP have? Some cable companies now rotate then on the hour I noticed.. others on about 3months.. but most it is one day.
Track it yourself.. see what gateway address the TC gets and if it is rotating with the IP.
If your client computers are running Mountain Lion.. the plain fact is, they are not particularly stable.
Wireless is worst.. ethernet tends to be ok.. but for instance Laptops updated to Mountain Lion can be pretty flakey.. with the TC.. and it is the combo that is more the issue. People report improvement with clean install of ML. BUT there is still a bug there that causes the ML to be less than fantastic.
I experience it occasionally even with a dlink wireless router.. after a wake from sleep.. the network will drop out and need to be manually connected back.. I have to admit I expect no better from Mountain Lion. I could load Snow Leopard on it and it would drop once every blue moon.. but I got the laptop with ML so I live with it.. !! -
Can somebdy help i cannot sign in msn because of default gateway :(
Hello can somebdy help me plz, I cannot sign in msn because of default gateway
when i try to log on msn messenger a troubleshoot box appears so i click on the troubleshoot button and it says my default gateway is offline so i uninstalled msn n reinstalled msn n it still says it PLZ CAN SOMEBDY HELP ME!! PLZ xx► What is the model number of your Linksys router?
► Who is your Internet Service Provider?
► How many computers are running through the Linksys network?
Are you online through the router by the way and are you just experiencing problem on the MSN messenger?
Message Edited by sharkbyte on 10-22-200605:02 PM -
The Default Gateway Is Not Available / Problem
Hello, I recently purchased this HP Pavileon laptop, and I've been encountering this problem very often (every 2-10 minutes). This problem is getting extremely frustrating as absolutely nobody has been able to provide a fix for this issue.
When the laptop is on battery mode (this does not happen when plugged in); I commonly get disconnected from my wi-fi connection and to fix it, I must run the troubleshooter. This temporarily fixes the issue by resetting the wi-fi adapter.
What I have tried and has not worked:
* Turn off to save power option in the driver settings (in Device Manager) untickets
* Updated drivers
* New power plan
* Tried different drivers
* Complete system restore
The wireless adapter is Realtek RTL 8188EE. Upon running the troubleshooter, this is all the information from the detailed information section:
Windows Network Diagnostics
Publisher details
Issues foundThe default gateway is not available
The default gateway is not availableThe default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Fixed
Reset the "WiFi" adapter
Completed
Investigate router or broadband modem issues
Not run
Issues found
Detection details
6The default gateway is not availableFixed
The default gateway is a device that connects a local network or computer to the Internet. A broadband modem or router is usually the default gateway.
Reset the "WiFi" adapterCompleted
This can sometimes resolve an intermittent problem.
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Repair.1.etl Investigate router or broadband modem issuesNot run
If you're connected to a hotspot or domain network, contact the network administrator. Otherwise: 1. Unplug or turn off the device. 2. Once all the lights on the device are off, wait at least 10 seconds. 3. Turn the device on or plug it back in to the power outlet. To restart a router or modem that has a built-in battery, press and quickly release the Reset button.
Detection details
Diagnostics Information (Network Adapter)
Details about network adapter diagnosis:
Network adapter WiFi driver information:
Description . . . . . . . . . . : Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Manufacturer . . . . . . . . . : Realtek Semiconductor Corp.
Provider . . . . . . . . . . . : Realtek Semiconductor Corp.
Version . . . . . . . . . . . : 2012.2.827.2013
Inf File Name . . . . . . . . . : C:\WINDOWS\INF\oem8.inf
Inf File Date . . . . . . . . . : 12 September 2013 10:17:00
Section Name . . . . . . . . . : HP8188ee.ndi
Hardware ID . . . . . . . . . . : pci\ven_10ec&dev_8179&subsys_197d103c
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2014-07-24 04:19:49-759
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 0 item(s) total, 0 item(s) displayed
Connection History
Information for Auto Configuration ID 1
List of visible networks: 1 item(s) total, 1 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 100 Yes Matt
List of preferred networks: 1 item(s)
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Information for Connection ID 1
Connection started at: 2014-07-24 04:19:49-759
Auto Configuration ID: 1
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 98-fc-11-88-61-b8
Security and Authentication
Configured security type: WPA2-PSK
Configured encryption type: CCMP(AES)
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: Yes
Multicast key received: Yes
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 34302
Ndis Tx: 32619
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 0
Rx failure: 0
Tx success: 0
Tx failure: 0
Tx retry: 0
Tx multiple retry: 0
Tx max lifetime exceeded: 0
Tx ACK failure: 0
Roaming history: 0 item(s)
Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Result of diagnosis: There may be problem
Diagnostics Information (Wireless Network Adapter)
Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM
Initialise status: Success
Information for connection being diagnosed
Interface GUID: 7c04789b-0b43-472c-abd6-a84cb31e9053
Interface name: Realtek RTL8188EE 802.11b/g/n Wi-Fi Adapter
Interface type: Native WiFi
Profile: Matt
SSID: Matt
SSID length: 4
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
Network Diagnostics LogFile Name: 2D0FE1F0-C2C2-43B5-A857-2D2B3C4B8A51.Diagnose.0.etl
Other Networking Configuration and LogsFile Name: NetworkConfiguration.cab Collection information Computer Name: LAPTOP Windows Version:6.3Architecture:x64Time:24 July 2014 04:34:47
Windows Network Diagnostics Detects problems with network connectivity. Package Version:1.0Publisher:Microsoft WindowsRun the HP Support Asssitant's Tune up application. There should be a new BIOS available. sp66866
Have you installed the latest Windows 8.1 updates?
Do not install optional video graphics updates.
I was runnning into a similar problem with my HP product loan Envy Spectre 13 TouchSmart Ultrabook until I did the updates. I had upgraded my wireless router to a model with 802.11AC specification.
Invoke the Device Manager and ensure that the box next to Allow this computer to turn off this device to save power is unchecked.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Hello!
I want to create bat script to create several VPN connection.
There is powershell command to create vpn connection:
add-vpnconnection -name "Test VPN" -serveraddress "vpn.example.com" -splittunneling -tunneltype "pptp"
And I need to create VPN connection without the option "Use default gateway on remote network" option on VPN connection"
Or modify this option on existent VPN connection with command.
Please help me to find command option or other command to disable "Use default gateway on remote network" option on VPN connection" feature.http://technet.microsoft.com/nl-nl/library/ee431701%28v=ws.10%29.aspx RouteIPv4TrafficOverRAS True – Add a default gateway on the VPN connection False – Do not add default gateway on the VPN connection
Maybe you are looking for
-
since latest update to airport extreme im getting 10 unknown base stations and time caps showing up as though they are a part of my network. sometimes i can "forget" them and they will disappear initially but soon return. i need and want only my conn
-
Difference between unit testing and integration testing
What is the difference between unit testing and integration testing in SAP? Is unit testing takes place in Dev client and integration testing takes place in QA system? Please clarify thanks
-
Error when Create Campaign in WebUI (customizing table BSPWD_RF_PROFILE)
Dear experts, I get an error in the WebUI when I try to create a marketing campaign (view CPGOE_DETAILS/OVEFDetails): Marketing -> Create -> Campaign. Error: "Application does not support 'no display mode' runtime setting". I have to configure someth
-
Exporting Keynote 4.0 to Powerpoint 2007 and 2008
I know that this topic has been discussed previously with respect to Powerpoint 2007 but I'm somewhat frustrated with the export to powerpoint feature in Keynote. Some background: 1. Using keynote since version 1.0 2. Never had a significant problems
-
Collecting Message from 'ForEachBlock'
Hi experts, i have a scenario of File-PI-RFC. My FILE is in XML format and consist of, for example, 10 POs (this is only example) with each of them has more than 1 items/details. However my RFC will only receive 1 PO with its items each time. Therefo