WRTU54G-TM Slow Setup Page and HTML Error on Access Restrictions Page

I have a WRTU54G-TM Wireless Router. It has v1.00.21 firmware and I have done a reset with no solution. Everything seems to work, except the setup pages load very, very, very slow. Also in Internet explorer I get an HTML error on the access restrictions page. Resets don't help. The router did not have this issue until about a month ago that I recall. I can see on the access restrictions page the gray shading is all lined up except at the bottom on the page, like ther is some sort of issue in the html within the router.
One more problem, after I reset the router the saved config file I made would not change the default settings back, I had an older saved config file also, it would not work either.
Is this an issue with this firmware version? Any one else see this?
Message Edited by johnsonle9 on 01-24-2010 01:24 PM
Message Edited by johnsonle9 on 01-24-2010 01:24 PM

Are you getting the same problem with another computer...?
Try using different computer and check if you are getting the same problem or not...If yes then,I would suggest you to re-flash/upgrade the router's firmware,reset the router and re-configure it from scratch..Do not use the save config file.

Similar Messages

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Slow shut down and repeating error message on Console

MacBook shutdown is very slow. This error message is repeated many times:
com.apple.Dock.agent[99] Sat Apr 23 21:50:12 JEBMacbk.local Dock[99] <Error>: kCGErrorIllegalArgument: CGSSetWindowTransformAtPlacement: Singular matrix [nan 0.000 0.000 nan]
Can anyone tell me a what to change to eliminate that error? (JEBMacbk is the name of my computer.)
Thanks

Pl indicate which version of Win 7 - you will need Professional or higher - Home version is not supported for installs - http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#BABIICFE
Pl confirm you meet all of the pre-reqs listed in the link.
Pl post the last 100 lines from the install log - http://docs.oracle.com/cd/E11882_01/install.112/e24186/ts.htm#i1090466
HTH
Srini

Time Machine won't back up. Starts of REALLY SLOW, and the errors out.

I've been having a hard time getting time machine to back up. To start off I'll give you my specs and what I have done.
iMac
OS 10.6.6
2.4 GHz Intel Core 2 Duo
4 GB 667 DDR@ SDRAM
320 GB HD
All software updates are current. I am trying to back up to an external Western Digital 1 GB drive connected by USB2. I have formatted the external drive, and set a single partition on that drive from the Disc Utility. I have run disk repair on both the external and local hard drive. I have run disk repair permission on the local drive. I have restarted, after every time. I have done everything listed above multiple times, and have done them all in kinda different orders each time.
My thought is that the issue may not be with the hard drives, but maybe a file its trying to back up. When it starts out for the first time, it tells me that it needs to back up over 100 GB of data. It gets about halfway done, and then errors out. When I try to start it again, it tells me that it needs to backup around 50 GB of data. And this time, its REALLY slow. Like bytes slow, not Mega bytes, or even kilobytes. Bytes. 36 bites backed up, 120 bytes backed up. 2 Kilobytes backed up. SLOW SLOW SLOW.
Then it picks up, and usually gets up to 120 MB, and then gives me this error message "The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?

woody24 wrote:
"The Backup was not performed because an error occurred while copying files to the backup disk. - The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk."
See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Its a pretty generic message, and gives me no help in trying to figure out what the problem is. I've been trying again for almost 3 days now, and nothing is working. Is there an error log file that I can go find that would help me a little more?
Tell Apple about the inadequacy of that message: http://www.apple.com/feedback/timemachine.html

Error in router's web-based setup page (WRT54G V5)

Hi,
My router’s web-based setup page is unable to load fully.
There seems to be an error with some document.setup.save file.
I have tried to reset my router but the router’s web-based setup page is still unable to load fully.
Please help.
Thanks.

Try Internet Explorer, it usually works.
JavaScript must be enabled.
Temporarily turn off your computer's software firewall, and see if that corrects your problem.
Hope this helps.

Customizing 400 and 500 error pages

Hello,
We are using default 404 and 500 error pages, how can I customize these error pages?
I have changed the default error page under global settings, however it is still not showing the error page which I have changed?
Could someone help in this regard.
Thanks in advance
Message was edited by:
419365

Normally those are page not found errors.
I got the steps from metalink. See below.
Subject: Changing the default error pages
Hi,
Steps mentioned below are used to have customize error message page for http 404 error,you can find out error no. for 'internal server error' and apply same steps.
1.Create an HTML file (Say test.html) as per your requirement and place it in
application_home\Apache\Apache\htdocs folder.
2.Edit the HTTPD.conf file and Uncomment the Local redirects as follows
# 2) local redirects
ErrorDocument 404 /test.html
Save it.
3. Restart the HTTP server.
********

Wrtu54g-tm slow internet and ? about 1.15 vs 1.20 vs 1.21

Been noticing that my internet is slow, especially on websites that source a lot of small pictures (rcgroups dotcom for instance).
Tonight for the heck of it I went to see if there was a FW update and saw that Linksys has 1.21 available.
Was surprised to see my modem is at 1.20 as the last I remembered it was at 1.15 and working great. Read that 1.21 has bugs.
So, the question is:
- is 1.20 a problem with my slow internet? FTP's UL and DL are fast, and my VOIP testing is good, but internet pages are laggy.
- Why isn't TM pushing out 1.21?
- Should I go back to 1.15?
thanks,
Dave

Well, T-Mobile did push out 1.00.15 at one time and I certainly didn't put 1.00.20 on my router, neither did my 10 yr old daughter.
MTU is currently at 1365 when I changed it over a year ago.
Speed testing on DSL Reports gives respectable #'s. It's web pages with a lot of different content that is laggy. First the banner, then the headings, then the rest. Even this Linksys forum section is doing it.
Dave
Gollum wrote:
The Router will not upgrade the firmware on it Automatically. May be you or someone must have tried to upgrade the firmware on your Router. V.120 is a good firmware.
When you login to the Setup page of your Router, below you need to change the MTU size from 1500 to 1350 and click on Save settings...
Now you can check the speed on your computer...

Error in Grid Control: Setup - Management Services and Repository - error

Hi, sometimes , in our grid control, we could see in
Setup -> Management Services and Repository -> errors, the following error
OMS failover: Error in OMS status collection. ORA-20233: Invalid Target=Management Services and Repository or Metric=Management_Servlet_Status (validate_target_metric)
How can I correct this ?
We are in 10.2.0.5 ( with 3 management servers )
thanks for your help
regards,

See the metalink note 388280.1,4487966 for solution.
Hope this helps,
Regards
Click here to [ Restore and recover OCR|http://www.oracleracexpert.com/2009/08/restore-and-recover-ocr-from-backup.html]
Click here to [Replace and repair OCR|http://www.oracleracexpert.com/2009/09/how-to-move-or-replace-and-repair-ocr.html]
Click here to [Backup and Recover VOTE|http://www.oracleracexpert.com/2009/08/voting-disk-backup-and-recovery.htmll]
http://www.oracleracexpert.com

Balancing Segment Value set Does't show values and Giving error Page.

In R12,LOV of Balancing segment, doesn't show values and giving error page while creating Retained Earnings Account in Ledger Options Page.
If once the ledger options finished, and it gets the status completed, can't we modify the Ledger options in future.
By mistake we finished. can i delete Primary ledger from Accounting stucture?
Thanks in advance,
VRC Murthy

Turn on the dynamic insert for your chart of account structure.
Make sure you have at least one value in each of the value value set attached to COA segments. Make sure retained earning account value exists in your Account value set.
Now you will be able to pick your retained earnings account in Accounting Setups screen.
After completing your ledger setup you will be able to modify some options like suspense account, reversal set, future enterable periods etc.
I have explained the GL setup in detail in my online training videos at http://handsonerp.com
Regards
Edited by: user2648997 on Nov 13, 2009 11:50 AM

MDT 2012 Windows 7 Deployment Stops At User Account and Computer Name Setup Page

I was given a sysprepped custom Windows 7 WIM image that was set up by a third party that didn't use MDT to create the WIM.
I created a task sequence to deploy it, but it never finishes. After the OS installs and it reboots, it comes up to the white setup page asking for a user name and computer name that looks like this image:
Is there a setting in MDT that can change that behavior?

Are you joining the computer to a domain?
It sounds like MDT did not create the unattend.xml file itself (or is there an unattend file already in the image itself?)
MDT needs to be able to autologin with the local admin account
From MDT in your task sequence - OS info - Edit unattend.xml you can check if your unattended file is correct.
Check what's in there for:
- computer name in 4 Specialize area - Windows-Shell-Setup_neutral (it should be empty if you want MDT to handle it).
- Also i think you need to have in the Specialize section, under Microsoft-Windows-Deployment_neutral - Run Synchronous an EnableAdmin insert
This will enable the local admin account
- Also check in phase 7 oobe System in Shell-Setup_neutral
There should be an autologon with a count of 999
Check if you have any Local Accounts there.
Finally read this:
When I am joining clients to a domain, can I avoid creating a local user
account on the computer?
Yes. To do this, create an image unattend file that adds a domain account to the Administrators group. In addition, you must delete the <LocalAccounts> section if it is present in your
unattend file (simply commenting it out will not work). An example file is below. Note that if domain join fails, Windows Deployment Services will not use the unattend file so you will be able to create a local account. For more information about creating
unattend files, see Automating Setup.
<?xml version='1.0' encoding='utf-8'?>
<unattend xmlns="urn:schemas-microsoft-com:unattend" xmlns:ms="urn:schemas-microsoft-com:asm.v3" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="amd64">
<UserAccounts>
<AdministratorPassword>
<Value>password</Value>
<PlainText>true</PlainText>
</AdministratorPassword>
<DomainAccounts>
<DomainAccountList wcm:action="add">
<DomainAccount wcm:action="add">
<Group>Administrators</Group>
<Name>DomainAdmin</Name>
</DomainAccount>
<Domain>DomainName</Domain>
</DomainAccountList>
</DomainAccounts>
</UserAccounts>
</component>
</settings>
</unattend>
I tried opening the unattend.xml from the MDT workbench, but it errors out saying it cannot be done because the captured image is x86.

Try to setup powerdvd 13 and got error for my LG blue-ray about 'SATA HL-DT -ST device'

i try to setup powerdvd 13 and got error for my LG blue-ray player about 'SATA HL-DT -ST device' that is not support the program setup. can you help me..?

What is powerdvd, and what does it have to do with Adobe software?
A quick google shows that is the product of a different company... you need to contact that company
http://www.cyberlink.com/store/powerdvd-ultra/buy_en_US.html?affid=2581_1013_80_paidsearch -us_0_1&gclid=COzWlpDVp7gCFadxQgodbhIAmA

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote.

WRT54G Wireless Setup page won't load and other issues.

Well I have had quite the mess the last 24 hours. I'll start from the beginning and attempt to spell out the issues I am having. I have had this router for 4 years or so and have never had a problem.
I recently purchased a PS3 and started using the wireless feature that it offeres. Well I was having problems staying connected and was running in to IP address conflicts with my laptop. So I thought I would cure that by moving the router to the ps3 and using a wired connection for its internet. So that is what I did and that is when the problems started snowballing!! After I got the router moved and everything set up, all seemed well at first.
Shortly thereafter I realized I was still getting IP conflicts. So i did some research and saw where I could dedicate an address for the ps3 and also change some of the wireless settings on the router homepage. I previously had never password protected my network. I'm in a rural area and there aren't many people around that would be trying to get on it. But I figured since I was there I would rename the network and password protect it and all of that. Well that didn't help either. I was still having problems.
I then did all of the resets. Online, on the unit and also a power cycle. So I was back to square one with the settings at this point. So today I noticed that my connection would go from its norm of 54mbps down to1 and then lose connection. I did the resets and restarts and all of that, to no avail. Then it got to the point where it wouldn't connect at all. I checked the actual connection by connecting my computer directly to the modem and it worked flawlessly. So I know it is a router problem. I also tried using 2 seperate laptops and they both responded the same.
I think part of the issue I had then was that the modem and router were on my entertainment center and weren't very high and were in a shelf. Also, my surround sound receiver does use a wireless connection to 2 of its speakers. I didn't know the proper placement of a router until I had this problem. Now that it is back in its previous location the connection seems to be normal, although once in the last hour I did drop down to 1mbps and have to disconnect and reconnect. But it hasn't happened again so far.
However, I am unable to access the wireless page on the router setup page. I did yesterday but it won't load today. On either computer. So I am unable to change the name of my network or assign a password or change any other wireless setting. And again, I've tried every reset method and it still don't work.
Also, does anyone have any advice on the conflicting IP addresses with the ps3? They sent me an email stating that it may be a port or firewall issue? After doing some online research it seems this particualr router has had a lot of problems getting along with the ps3.
I hope I haven't put in too much information but I was just trying to make sure I had any questions I could think of answered ahead of time. I've tried about every avenue I could already. I tried the chat help and was told I didn't qualify and was sent to the phone assistance who after a half hour realized I didn't qualify for that help either. So, here I am!!! Thanks ahead of time!

Make sure that there is no static IP address on any of your computer. You can assign a static IP address on Play station.
Connect the computer to the router with the Ethernet cable.
Download t he latest firmware from Linksys website and save it on your computer.
Open the setup page of the router. Go to Administration tab and click on Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and upgrade it on your router.
After upgrading the firmware on your router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.
Change the MTU size on the router to 1365.
Go to Wireless tab and change the wireless network name and channel to 11. Also change the wireless security settings.

Firefox is slow to load and view pages and repeated "Firefox is not responding" message

Firefox is quite slow to load and view pages with and I keep getting the "Firefox is not responding" message.
I have the latest version, plus the latest Adobe Flash Player, Shockwave Player, etc.

Note that Firefox 36 has been released officially.
*https://www.mozilla.org/en-US/firefox/36.0/releasenotes/
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

I have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i cannot even restore it. does anyone know what to do?

i have an iphone 4 and after updating it to the ios5 software, it will not allow me to activate nor allow me to leave the setup page. i plugged it into itunes and it is stuck there too... i cannot even restore it. does anyone know what to do?

I have had this same issue but thankfully fixed it. Follow he steps below:
Sync your iPhone with you iTunes therefore your info is backed up. Unplug your phone.
Go to Settings > Reset > Erase All Content and Settings
Once your phone has reset and come back on answer the question until it asks if you want to back up from itunes Click this then plug your phone in.
After everything has sync'd back to your phone everything should work fine.
Hope this helps.

WRTU54G-TM Slow Setup Page and HTML Error on Access Restrictions Page

Similar Messages

Maybe you are looking for