WS And Web Dynpro: Error while processing document security
Hi all,
We have a problem when use Web Services (stateless session bean) in Web Dynpro.
When two users calls the same web dynpro in the same time we have this error:
Errore in: it.sap.mdm.pdcmodelcomponent.wdp.InternalLookUpModelController getLookUpTable:
Class___: com.sap.tc.webdynpro.model.webservice.api.WDWSModelExecuteException Additional Info:
Message_: Exception on execution of web service on destination 'FS_MDM_PDC' for operation 'getLookupTable' in interface 'ZMDM_FS_PDCVi_Document'
Causa__:
Error while processing document security. The error was class com.sap.engine.frame.core.configuration.ConfigurationException Configuration webservices/proxies/sap.com/ mapping is not valid - configuration is closed.. See trace entry [no trace for com.sap.security.core.client.ws.DeployableSecurityProtocol (severity above PATH)].; nested exception is: com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClientProtocolException: Error while processing document security. The error was class com.sap.engine.frame.core.configuration.ConfigurationException Configuration webservices/proxies/sap.com/ mapping is not valid - configuration is closed.. See trace entry [no trace for com.sap.security.core.client.ws.DeployableSecurityProtocol (severity above PATH)].
If I call the same web dynpro ,without other user, it's ok.
Where is the problem?
I have to congigure some parameter in J2ee???
Hi
Use this pdf to implement Mutual Exclusion
http://java.sun.com/developer/Books/performance2/chap3.pdf
http://navet.ics.hawaii.edu/~casanova/courses/ics432_fall08/slides/ics432_jmonitors.ppt#313,10,Synchronizing on Multiple Objects
thanks
Similar Messages
-
Error while processing message to remote system
Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
RaghavendraHi,
>>><i>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.</i>
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha. -
Error while uploading document in Primavera portfolio management
Dear All,
I am getting error while uploading document with particular user in PPM
Error occur when I upload document and click on save button.
Error from log :
<Exception>
System.InvalidCastException: Specified cast is not valid.
at ProSight.Portfolios.Infrastructure.Database.IpsDataRow.getInt(DataColumn iColumn)
at ProSight.Portfolios.BusinessLogic.Infrastructure.Objects.psLinkObj.addNew(Int32 iUserID, Int32 iPortfolioID, Boolean isPortfolioLink, IpsDataTable iLinkRec)
at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenario.psTSTabset.update(Int32 iUserID, Int32 iFormsetID, Int32 iPortfolioID, Boolean iIsImmediate, psResultContainer iParam)
</Exception>
</Trace>
<Trace Type="Error" Time="1/31/2015 1:44:36.758" class="psTransactionalScenarioInterface" Method="handleException" Process="w3wp.exe (4236)" Client="">
Error in psTSFormset.update
<Exception>
System.InvalidCastException: Specified cast is not valid.
at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.invokeTS(String className, String methodName, Object[] parameters, Int32 maxRetries, Int32 minRetryWait, psResultContainer containerToClean, Boolean iDisableTransaction)
</Exception>
</Trace>
<Trace Type="Error" Time="1/31/2015 1:44:36.758" class="Transaction" Method="handleException" Process="w3wp.exe (4236)" Client="">
Unhandled Error GUID: a3640801-43cb-48d4-89b4-cede50780e47 \"File name: /Prosight/forms/saveForm.aspx\\nStack trace: at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.handleException(Exception iEx, String iAddionalMsg)\\r\\n at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.invokeTS(String className, String methodName, Object[] parameters, Int32 maxRetries, Int32 minRetryWait, psResultContainer containerToClean, Boolean iDisableTransaction)\\r\\n at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTransactionalScenarioInterface.invokeTS(String className, String methodName, Object[] parameters, Int32 maxRetries, Int32 minRetryWait, psResultContainer containerToClean)\\r\\n at ProSight.Portfolios.BusinessLogic.TS.TransactionalScenarioInterface.psTSITabset.update(Int32 iUserID, Int32 iDashboardID, Int32 iPortfolioID, Boolean iIsImmediate, psResultContainer iParam)\\r\\n at ProSight.Portfolios.Server.Presentation.Logic.Forms.psPLForms.update(psResultContainer iResultContainer)\\r\\n at invoker137.Invoke(Object , Object[] )\\r\\n at Microsoft.JScript.JSMethodInfo.Invoke(Object obj, BindingFlags options, Binder binder, Object[] parameters, CultureInfo culture)\\r\\n at Microsoft.JScript.LateBinding.CallOneOfTheMembers(MemberInfo[] members, Object[] arguments, Boolean construct, Object thisob, Binder binder, CultureInfo culture, String[] namedParameters, VsaEngine engine, Boolean& memberCalled)\\r\\n at Microsoft.JScript.LateBinding.Call(Binder binder, Object[] arguments, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParameters, Boolean construct, Boolean brackets, VsaEngine engine)\\r\\n at Microsoft.JScript.LateBinding.Call(Object[] arguments, Boolean construct, Boolean brackets, VsaEngine engine)\\r\\n at ASP.forms_saveform_aspx.main()\\nError code: -1\\nError Reason: Specified cast is not valid.\\n\\n\", \"/ProSight\"
</Trace>
<Trace Type="Error" Time="1/31/2015 1:44:47.584" class="psException" Method="printException" Process="w3wp.exe (4236)" Client="">
Could not update form data
USERID: 422
DEADLOCK DETECTED: False
Kindly help.Hi,
chk ur authorizaion errors... su53 dump.
Thx,
waseem -
Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Error while billing document releasing to accounting.
Hi Experts,
Please give me possible reasons for below error while billing document releasing to accounting.
"Valuation with material cost estimate: error with product "500258045"
Message no. KE350
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "BDE98561002" in plant "9856".
Display material (View: Costing)
The system looked for the material cost estimate using costing key "ZK1", as defined in the Customizing settings for CO-PA.
System Response
The document cannot be processed.
Procedure
Contact your system administrator".
I have checked CKR1 transaction there were no cost estimates with KF costing status.
NOTE: Material Ledger Activated.
Please suggest the possible reasons and what to check?
Regards
Chandra.Check the cost estimate that is mentioned against the Costing key ZK1 whether it exists in the system and as you are saying there seems to be no cost estimate for the said material.
Hence release the std cost estimate for the said materia using CK11n or CK40n -
Error while processing library references. Unresolved application library
Hi All,
I created one ADF task-flow,in which I used content from share point, and then I converted portlets and deployed into integrated WLS server.and then I consumed thoese portlets into web-center spaces its working file.
but i want to deploy those portlets into standalone server while deploying those I am getting following Errors. I am using 11.1.1.1.6 version for all my development.(Jdeveloper,webcenter and all).
[07:48:08 PM] [Deployer:149193]Operation 'deploy' on application 'SP2010_application1' has failed on 'AdminServer'
[07:48:08 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application SP2010_application1 on AdminServer.: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.content.jcr.sharepoint, Specification-Version: 11.1.1, exact-match: false]..
[07:48:08 PM] Weblogic Server Exception: weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.content.jcr.sharepoint, Specification-Version: 11.1.1, exact-match: false].
[07:48:08 PM] See server logs or server console for more details.
[07:48:08 PM] weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.content.jcr.sharepoint, Specification-Version: 11.1.1, exact-match: false].
[07:48:08 PM] #### Deployment incomplete. ####
[07:48:08 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
please take a look into this. resolve me.
regards
SivaGeorge,
To solve my problemn I uninstall my JDev, remove all folders (Oracle_home, and JDeveloper folder in users - app data - roaming). Install again, and get Webcenter Bundle from Help - Updates. Before a uninstall I was using a bundle that a have here in my machine.
Thks -
Error while processing Idoc - Urgent!
Hi all,
I am getting the following error while processing the IDOC :
"Application Document not posted "
Status = 51
Error Details :
" V51VP - item was not found - process cancelled ".
Any ideas, what's wrong?
Please Help.
Regards,Hi,
U might be not passing any item value to idoc which might be necessary...wat u can do is
goto WE19 TCODE,give the error idoc number and press execute button,now in the next screen CLICK ON INBOUND FUNCTION MODULE in the application tool bar,now give the FM NAME which triggers teh idoc,check the check box IN DEBUG MODE and radio button IN FOREGROUND....Now it will take to inside of the FM ,now debug and see where it caught the error..
Regards,
Nagaraj -
Differences between ITS based and web dynpro based ESS
Hi all,
What are the main differences between ( in functionality ) for ITS based and web dynpro based ESS.
I know a few
Underlying technology
ITS ESS had inbox concept, where as web dynpro based ESS/MSS has UWL concept for approvals.
The time statemment in ITS uses smart form while we can use Adobe document services for time statement in ESS 2004.
Funcitonality
There was not collective time approvals option In ITS ESS ( not even in ESS 2004 ) but ther is a collective time apporvals in ESS 2004s
Am not pretty mich intrested in look and feel, or the overview page concept but any additional functionality and a shift in the technology used.
Please add.
regards
Sam
Message was edited by:
sameer chilama
Message was edited by:
sameer chilama
Message was edited by:
sameer chilamaanswered
-
Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek -
Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
ThanksHi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Creating database problem with ORA-01519: error while processing file '' ne
Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek -
Object failed to run due to an error while processing on the Job Server
when i am scheduling a report ith email notification i am getting below error
error msg: Object failed to run due to an error while processing on the Job Server
i have configured email notification in bo cmc and server also SMTP enabled. while scheduling report to ueser i am getting error and even mails are delivered to users as well.hi prithvi,
i am able to schedule reports to other destinations and reports are delivered as per the requirement.
i am able to telnet SMTP server from Adaptive job server machine on SMTP port.
have to check errors on log file....
@ COULD YOU PLEASE LET ME KNOW USER CAN SEND A MAIL TO USER IN SAME DOMAIN . WHILE SCHEDULING A REPORT AND AS OPTION AVAILABLE IN 4.0 LAUNCH PAD CAN HE SEND A MAIL DIRECTLY AFTER RUNNING REPORT. -
Error while processing sales order as factory calendar missing.
"factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.
Hi Malik, How are you? I'm sorry to trouble you,
Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
the topic "How to update Factory Calendar in SRM", and might I have the same
problem. It's with the "factory calendar".
In transaction va02 when I choose a Delivery Date, and I sent it to process, as
a result in the "shipping tab" it calculated to the first item one date, and to
the rest one date different. I don't know What it happen?
I debugged the program and I saw that to the first item use to calculate the
date is the function 'APO_SCHEDULING', and to the rest item use
'SD_SCHEDULING', and until here I come.
How can I do to what the dates calculated are the same? or What would be the
problem?
I need the dates calculated are equal.
I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
correct?
Thanks In Advance,
My best regards, -
'error while signing document'
i got this error ('error while signing document') on my 1st attempt to use the service. simple 4 page PDF, no doc. security, same error both b4 & after i edited my user profile (i filled in the missing details & changed the default signature image).
cheers,Hi,
I am also getting this error while attempting to sign a document. I have checked the first and name fields in my default signature profile for any non-English characters but I am still getting this error. I have also tested with a different signature profile with same results. Please advise if there are
other fields I need to check.
Thanks. -
Error while loading document when user executes IW32
we have brand new laptops and desktops installed SAP GUI 6.40 patch level 27 and microsoft office 2003.when the user tries to execute IW32 and click on the long text button.when we try to change the editor it is giving ERROR WHILE LOADING DOCUMENT
ERROR WHILE LOADING DOCUMENT
message no .sofficeintegration142
DIAGNOSIS
An internal error occured in the SAP Document Container Control while loading a document
PROCEDURE
If the error recurs,enter a problem message.There are notes relating to how to create the log file using the report SAPROFFICEINTEGRATIONTRACE1Hi Rajanarenderreddy,
Were you able to resolve your problem?
If so how? We have a customer that is experiencing the same problem.
Thank you for your feedback.
Br,
Tom.
Maybe you are looking for
-
Will we still be able to use the Adobe FormsCentral desktop app after FormsCentral retires?
Is it just the online service that is expiring? Will I be able to create fillable PDF's using the desktop app (not online) to create fillable PDF's? Thanks!
-
HS link from Oracle 9.2 to MySQL under Solaris 8
Solaris 8 ( 64 bit ) Recent versions of MySQL are dynamically linked ( i think) and as such the Shared Object / driver mentioned in the HS installation details isn't there after you've installed MySQL onto your machine. So how then do you get libodbc
-
Change document items (CDPOS)
hello boss how to use these tables CDPOS and CDHDR , in that i had given the document no as sceduling agreement no but i didnot get result, in that table waht is that object value and change doc object what is that kindly tell me what is the use of
-
Stopping cell editing in a JTable using a JComboBox editor w/ AutoComplete
Hi there! Me again with more questions! I'm trying to figure out the finer parts of JTable navigation and editing controls. It's getting a bit confusing. The main problem I'm trying to solve is how to make a JTable using a combo box editor stop editi
-
Macbook Battery Update 1.4 won't run on Snow Leopard
Since this topic has been archived and no answer really found, i open it again so you can help me. plz help...that new package you created is working well? has this problem been solved on last updates of snowleopard? or we need to install that 1.2 ed