WS-X6348 Module use for non-POE?
We have two WS-X6348 48-port RJ-45 power-over-ethernet (POE) cards in our 6509 switch. We do not need to use these cards for POE. Can they be used for non-POE devices without any problem? Does the card have to be configured as such? We are worried about damaging equipment (non-POE device, the WS-X6348 card or the 6509 chasiss itself).
Can anyone render any advice relating to this?
Thank you!
Frank Nye
While you can use the WS-X6348 card with Non-PoE Device, I would also take a look at the power consumption of this module, so you can provision your power supply accordingly.
http://www.cisco.com/warp/customer/788/AVVID/cat6k_inline_pwr.html
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/6000hw/inst_aug/02prep.htm
Regards,
Arul
** Please rate all helpful posts **
Similar Messages
-
Function module used for ENQUEUE_EIQMEL & DEQUEUE_EIQMEL function
Hi All,
It should be highly appreciable if any one could please help.
I need the name of the function module used for ENQUEUE_EIQMEL & DEQUEUE_EIQMEL function.
waiting for help.
Thanks
ShawHi,
The names 'ENQUEUE_EIQMEL' and 'DEQUEUE_EIQMEL ' you have mentioned are itself the function modules. Which other FM's you need i didnt understand.
These are FM to ahndle lock objects 'QMEL'.
please reframe your question in case of further issues.
Regards,
Mansi. -
Can SCAN be used for non 11gR2 databases ?
I am in the processes of database consolidation phase, where in I am consolidating 15 server to a 6 node single Grid for RAC , non -RAC & RAC one node.
I have non -RAC standalone database on NFS mount , visible on all the 6 nodes , idea is to be able to start the db from any node I like for maintenance which I can do with RAC & RAC ONE NODE.
I am planning to run SCAN on 3 node , but the question is, can I use SCAN listener for all the databases ?.
Currently started with a 2 node cluster where I have 11gR2 and couple of RAC one nodes and a 10g rac .
I am able to point to scan LISTENER and able to connect to 10g db , to me SCAN looks very pomissing for our kind of environment where db's can run on any node with out impacting client changes.
Before I present this to the management which I am planning to do This Thursday ( big day for me as I am projecting to save quite a bit of money ).
I don't want to push some thing that's not going to work , even thoug I can prove it now that it works.
And more importantly I have not see a document in google or ORACLE support that says I can nor a sign that any one using for non 11gR2.
How is this SCAN compared to OID or SUN OPEN DS ?Hi,
generally, SCAN can be used for 10g databases and you discovered the first half: for 10g databases you will have to modify the REMOTE_LISTENER entry for each 10g database instance to point to the SCAN listeners (as opposed to pointing to the remote local listeners, which is the default in 10g). You could even have the databases registers themselves with SCAN and the remote listeners, if you wanted to... It's more or less a matter of configuration. But for simplification reasons, I will stick to the case where you have your 10g databases register with the SCAN listeners only.
Now the other half is the client and the client configuration. An 11g Rel. 2 client configured for RAC would have a TNSNAMES entry that has only one address line for the RAC databases. The host entry in this one address line should point to the SCAN (the SCAN name is ideally resolved in DNS). A 10g client configured for RAC would have as many address lines in the TNSNAMES as you have nodes in the cluster.
The 10g client SCAN configuration would then be in the middle so to speak: You would have 3 address lines in your TNSNAMES, in which each host entry would resolve to one SCAN address (I assume you will use the recommended default of 3 SCAN IPs). If you choose, you can have a name resolution for each of your SCAN IPs, but this would not be required. Now, why would you do it this way? Because this configuration will always work and does not make you dependent on certain functionality that your DNS server may or may not offer.
For the remaining questions: SCAN is a DNS entry resolving one name to more than one (typically 3) IP addresses. OID is short for Oracle Internet Directory, which is a complete LDAP server. And you are right that there is no document how to configure 10g clients for SCAN from Oracle yet. However, there is a quite good document on SCAN on otn.oracle.com/rac, but I am sure you are aware of it already.
Hope that helps. Thanks,
Markus -
What is this function module used for? -QKRT_MEAN_VALUE_SHEWHART
What is this function module used for? What does a K-factor mean?
What is this function module used for? What does a K-factor mean?
-
I need to know thelist of bapi's and function modules used for transaction
I need to know thelist of bapi's and function modules used for transaction in order to use these FM or BAPI in reading some fields of equipment master and functional loocation.Can any one suggest me some methods...or do i need to write a report for the same.
Steps to find the BAPI/function modules used in a transaction
1) Find the package of the transaction thro' SE93.
For example the package for the transaction VA03 is VA
2) Go to Se80, key-in the package (say VA)
3) You can see the function modules under the folder finction group and
you can see the BAPI's under the folder Business Engineering-> Business Objects-> double click on the released methods of the Business Objects -
To know thelist of bapi's and function modules used for transaction IH10
I need to know thelist of bapi's and function modules used for transaction in order to use these FM or BAPI in reading some fields of equipment master and functional loocation.Can any one suggest me some methods...or do i need to write a report for the same.
hi,
provide report name (here: RIEQUI20)
goto se38 - utilities - cross reference - function modules
or use report RPR_ABAP_SOURCE_SCAN
with search string call function
A.
Message was edited by:
Andreas Mann -
Can Jdeveloper Be Used For Non-Oracle Databases
I have been trying to evaluate Jdeveloper 9i and Jbuilder 7 Enterprise for Swing database development. I am particularly interested in the productivity enhancements such as BC4J and Jclient. The underlying database might be Oracle, SapDb (excellent, easy to use, and free), SQLServer, etc.
I evaluated Jbuilder Enterprise tools and it worked flawlessly with SapDb. This emphasized using their DataExpress and DbSwing components which provide many useful capabilities similar to BC4j and Jclient. It also involved using their DBPilot tool which allows browsing similar to that provided via a Jdeveloper connection.
I tried to use Jdeveloper for the same SapDB and it is essentially non-functional. I followed the instructions for using a non-default driver and tried to define a connection. It behaved inconsistently: often saying no suitable driver can be found and yet when you edit the connection and test without making any changes, it works. If you try to establish a BC4J definition, it is very inconsistent and fails to recognize important details as foreign keys. Even if you define a ViewLink manually, it still does not work properly if you attempt to define a Master-Detail Jclient form. As I have stated, all these types of capabilities worked flawlessly in their Jbuilder equivalent. Furthermore, I really like the fact that Jbuilder gives many of BC4Js benefits without needing a BC4J J2EE container.
Has anyone had real success using Jdeveloper's advanced features to develop for non-Oracle databases and if so, how did you get around these types of problems?Hi,
generally, SCAN can be used for 10g databases and you discovered the first half: for 10g databases you will have to modify the REMOTE_LISTENER entry for each 10g database instance to point to the SCAN listeners (as opposed to pointing to the remote local listeners, which is the default in 10g). You could even have the databases registers themselves with SCAN and the remote listeners, if you wanted to... It's more or less a matter of configuration. But for simplification reasons, I will stick to the case where you have your 10g databases register with the SCAN listeners only.
Now the other half is the client and the client configuration. An 11g Rel. 2 client configured for RAC would have a TNSNAMES entry that has only one address line for the RAC databases. The host entry in this one address line should point to the SCAN (the SCAN name is ideally resolved in DNS). A 10g client configured for RAC would have as many address lines in the TNSNAMES as you have nodes in the cluster.
The 10g client SCAN configuration would then be in the middle so to speak: You would have 3 address lines in your TNSNAMES, in which each host entry would resolve to one SCAN address (I assume you will use the recommended default of 3 SCAN IPs). If you choose, you can have a name resolution for each of your SCAN IPs, but this would not be required. Now, why would you do it this way? Because this configuration will always work and does not make you dependent on certain functionality that your DNS server may or may not offer.
For the remaining questions: SCAN is a DNS entry resolving one name to more than one (typically 3) IP addresses. OID is short for Oracle Internet Directory, which is a complete LDAP server. And you are right that there is no document how to configure 10g clients for SCAN from Oracle yet. However, there is a quite good document on SCAN on otn.oracle.com/rac, but I am sure you are aware of it already.
Hope that helps. Thanks,
Markus -
Function module used for formatting alv
hi gurus,
which function module is uesd to format alv?Hi
see the following
ABAP List Viewer
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
Check the program in the following link:
http://sap-img.com/abap/display-secondary-list-using-alv-grid.htm
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_basic.htm
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
13. Top-of-page in ALV
selection-screen and top-of-page in ALV
14. ALV Group Heading
http://www.sap-img.com/fu037.htm
How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
15. ALV output to PDF conversion
It has an example code for PDF Conversion.
http://www.erpgenie.com/abap/code/abap51.htm
converting the output of alv in pdf
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Regards
Anji -
List of function module used for cluster table
hi,
I want to know the list of all function module used th extract data from cluster table such as such MONI, STXL.
thanks,
john diasWhen inside SE11 for MONI, lets say, press the where-used list button and select the option for FUNCTION MODULE INTERFACES to see a list of FMs that take a structure of type MONI as input/output parameter. Although this will not give an exhaustive list of FMs, it will assist you to a good extent.
Additionally, you can try FM APPLICATION_DATA_GET.
For STXL, take a look at FM READ_TEXT and associated include file LSTXDUXX for more functions in this function group SAPLSTXD.
Regards
Message was edited by: Shehryar Khan
Message was edited by: Shehryar Khan -
Alert Categories - Can they be used for Non-BPM scenarioes?
Hi experts,
I have a quick question and it's regarding the question I posted yesterday on:
How do I configure an auto-email alert for Adapter engine errors
Will I be able to send alerts for Adapter Engine errors (Through the use of Alert Categories), if I am not using BPM?
Please advise.
Thanks.
Ron> Hi,
> There are 2 kinds of alerts,,
>
> 1. Alerts without BPM
> 2. Alerts with BPM.
>
> Alerts without BPM are used in real time to montior
> any error in yoyur landscape. Whenever an error
> occurs, the alert will be triggered. This will also
> include Adapter Engine Alerts
>
> Please look into this blog for Alerts without BPM,
>
> <a href="/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step">Alerts
> Step by Step</a>
Hi,
From your answer, can I confirm that alerts I defined in ALERTCATDEF can be used by for Non-BPM interfaces?
The essential difference between BPM and Non-BPM alert triggering is BPM allows a control step to trigger an alert.
Please correct me if I'm wrong.
Thanks.
Ron -
Credit Card Info Hacked and used for Non-Skype Pur...
On July 19 my credit card info that is held by Skype for automatic credit purchases was hacked and used to make a non-Skype purchase of $565.27. I only use this card for Skype.
Fortunately my credit card company has credited me for this fraudulant purchase.
Has anyone else had this problem?Apple cannot tell you directly, assuming that the charges were indeed really from the iTunes Store. It's quite possible that they weren't; many fraudsters are sending fictitious "iTunes" charges directly to people's credit card/bank accounts. Your credit card company may be able to request information from Apple if they wish to pursue the matter, but most likely the card company will just refund you the fraudulent charges and cancel and reissue your credit card.
Regards. -
Hi.
I am a part of an organization and we intend to use virtual copies of Windows 7. Is it illegal to use such copies for educational purposes in a non-profit organization?
Arming Windows 7 with trial licenses, is it illegal to use in California?Hello,
The TechNet Wiki Forum is a place for the TechNet Wiki Community to engage, question, organize, debate, help, influence and foster the TechNet Wiki content, platform and Community.
Please note that this forum exists to discuss TechNet Wiki as a technology/application.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
Is WDS useful for non CCKM capable clients?
Hi,
I have been reading abut WDS recently and let's say you have a couple of 1140s and want to have users authenticating with MS IAS (using PEAP) and enable roaming for them.
There aren't any funky IP Phones or other clients that would support CCKM. Just laptops from different vendors.
What benefit can you get from running WDS? Does it support roaming in the way that when a user roams from one AP to another not all of PEAP auth packets go to the RADIUS server so it's quick? And with CCKM it would be super extra quick?
Or, there's no benefit and setting up both APs with the same SSID and auth on non-overlapping channels would be enough?
Thanks and regards,
MiroWhat happens if you only have the same SSID and roam, the clients will reauthenticate with PEAP to the IAS. Count on 1 second gap every time you roam.
This is actually totally ok for data clients usually (applications rarely notice when network is unreachable for less than a second).
Having a WDS has the advantage that it's always the same AP doing the authentication towards IAS so that's less configuration on the IAS side.
The biggest advantage is when used with CCKM indeed.
If CCKM is not an option, you have to rely on WPA2 fast roaming. But on IOS APs, it only occurs when a client roams to an AP it was already associated to. It then reuses the same keys.
Not as effective obviously -
Function Module used for user Authentication in B2B webshop
Hi Gurus,
Can someone please help me in finding a Function module which is getting called for the user authentication in B2B webshop and where can i find this class file which is getting called in the NWDS?
Thanks
SaurabhDepending upon if you are coming from Portal (SSO) or B2B logon screen, one of the following function modules is called to authenticate authorize the B2B application usage.
CRM_ISA_IUSER_LOGIN
CRM_ISA_LOGIN_CHECKS
Easwar Ram
http://www.parxlns.com -
Function Modules used for PO Vendor Confirmation
Hi,
Pls. let me know which function module is used to update EKES table during Vendor Confirmation in Purchase Order.
Thanks in advance.
Regards,
RameshHi Ramesh,
Please check this FM ME_CONFIRMATION_UPDATE.
This FM will perform direct update to table EKES (please be careful).
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.
Maybe you are looking for
-
I am not sure how to get my images to respond to the mouseClicked event. I need to know how I can get an image to play an audio clip once it is clicked on.
-
Cannot install iTune for Windows
Hi, I just bought an iPod nano and I tried to install iTune for windows 64 bit but I always get an error message concerning a Boujour service that it seems I don't have the rights to start. Here are some of the installation events Windows Installer a
-
RoboHelp 7 Crash - MS Visual C Runtime Error
I have been using RH7 for many months. Today, I was using Single Source Layout > Printed Documentation > Properties. And it crashes without doing any more than looking at the dialogue; sometimes when setting the location for the output. I get a Micro
-
System default email client (Thunderbird) does not appear in mailto applications.
I should like to use Thunderbird as the mailto application in Firefox. The only options listed for mailto are GMail, Yahoo mail, always ask, and choose application; use default does not appear.
-
Hi, does anyone knows how to make a listbox with text + a checkbox (boolean), so that it is possible to check a specific item in the listbox? Best regards, Thijs Boeree