WTR1900 Internet Bandwidth Usage Report

Hello,
I have many client devices connected to my WRT1900... When I click on the Internet Bandwidth Usage Report, the results have every device listed as 0.00 MB of internet traffic.  Well, every device on my network access the Internet constantly.
What am I missing to have this report actual provide some information?
//Brew

Hi @brudertl,
I also got confused with this before. I just tried to powercycle the modem, router and all the devices on the network. This might help.

Similar Messages

  • Internet bandwidth usage reporting in real time

    Need some guidance with regard to software selection and physical layout. I've been asked to provide reports on internet usage;
    - IP address
    - port/protocol
    - bandwidth
    We havcusco cisco 4500.
    Our ISP router is 3400 metro router (fibre to Ethernet media converter).
    We have the ISP connected to a port on the 4500 in vlan 99, the users are in vlan 44 (using a virtual layer 3 gateway).
    If I want to do just a quick capture could i simply connect a workstation with wireshark to a port on the 4500 and place that port in vlan 99?
    If so I assume the same theory would work with tool like bandwidthD that is more suited to long term captures and has a nice pretty GUI for my  manager?
    Bit confused as to whether I need a mirror or span port setup.
    Thanks

    You'll need to configure SPAN with VLAN 99 as the source and the port your reporting workstation is connected to as the destination. Otherwise most of the traffic will never reach the reporting workstation.

  • What Is The Network Bandwidth Usage Report?

    I'm looking at the "Network Bandwidth Usage" report and it's just a list of devices with no bandwidth numbers?  Is it ordered by amount of usage and if so, why isn't the usage displayed in the report and how do I see the usage for a device?  
    This topic first appeared in the Spiceworks Community

    Page 22 of this document will give you some numbers that will allow you to estimate the total data used for a meeting. Keep in mind these numbers are what Adobe saw as average consumption, yours may be higher or lower.
    http://www.adobe.com/content/dam/Adobe/en/products/adobeconnect/pdfs/web-conferencing/Adob e-Connect-9-Technical-Guide.pdf

  • Share Internet and Usage Reporting

    Hi,
    I've been from Novell for some time and I've been trying to understand a little bit more about how the Novell Open WorkGroup Suite Small Business 2.5 and I was wondering how can I share the internet to the users and view logs of what sites are being accessed by user. I know I could do this with Bordermanager but I dont know if this is something I can do with NOWS SBE.

    For what it's worth, I know of no way to do this natively in NOWS-SBE 2.5; I
    use unTangle boxes in front of my servers to facilitate exactly what you're
    asking for, in addition to spam, malware, and antivirus, web filtering, web
    failover, bandwidth usage, intrusion prevention, protocol control and
    firewall. It works perfectly, and I have had no problems with it in
    conjunction with NOWS-SBE in any release.
    "adelaespriella" <[email protected]> wrote in message
    news:[email protected]..
    >
    > Hi,
    >
    > I've been from Novell for some time and I've been trying to understand
    > a little bit more about how the Novell Open WorkGroup Suite Small
    > Business 2.5 and I was wondering how can I share the internet to the
    > users and view logs of what sites are being accessed by user. I know I
    > could do this with Bordermanager but I dont know if this is something I
    > can do with NOWS SBE.
    >
    >
    > --
    > adelaespriella
    > ------------------------------------------------------------------------
    > adelaespriella's Profile: http://forums.novell.com/member.php?userid=6667
    > View this thread: http://forums.novell.com/showthread.php?t=420306
    >

  • Usage Report not showing data

    Hello,
    When I am opening usage reports under Site Settings > Site Administraton > Popularity Trends, i cannot see any data after 9th May 2014. It stopped working and all the numbers coming to zero after 9th may. 
    I tried many solutions that are given on internet for this issue like restarting timer job, enabling usage on usage service application, permission on log files, etc.. but none of them worked for me.
    Please help me out. Is usage report depend on any service? search is working fine, usage service application is working fine.
    Thanks.
    chirag

    Hi  chirag,
    For troubleshooting your issue, please take steps as below:
    Make sure the Web Analytics Data Processing Service and Web Analytics Web Service are started on each server.
    Make sure web analytics service application is started
    Deactivate and Activate the site collection Features on Reporting.
    Check the detail error message of ULS log  to determine the exact cause of the error.
    Also you can have a look at the article:
    http://geekswithblogs.net/bjackett/archive/2013/08/26/powershell-script-to-workaround-no-data-in-sharepoint-2013-usage.aspx
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/30d11d27-6708-4bfe-a7d3-4b0aed522e7d/site-web-analytics-reports-no-more-data?forum=sharepointadminprevious
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Bandwidth usage with homesharing

    I have recently found my bandwidth being used while streaming from Macbook Pro to Apple TV whilst using Home Sharing. Watching a 1.2 GB movie streamed from iTunes to Apple TV uses 1.2 GB of bandwidth!
    I have reset my Apple TV but the problem continues.
    I have disconected the Bell modem from the internet and the problem goes away. The Macbook streams efficiently to the Apple TV using the home wireless network.
    Has anyone encountered this problem? And, more importantly, can anyone suggest a solution.
    Thanks for any help you may be able to provide.
    D

    Hi diesel vdub
    I am definitely using the Computers icon of my Apple TV. I have factory reset the modem but the issue remains. As I mentioned before when the modem is on, but disconnected from the internet, movies and videos stream fine to the Apple TV with no significant bandwidth usage.
    D

  • Does Apple TV need Internet bandwidth even if the content is available on LAN?

    Hi,
    I was wondering whether Apple TV needs Internet connection just to verify user credentials or it actually uses bandwidth to stream media even if the videos are available locally on a storage device.
    I am using an Apple TV 2nd Generation connected to a HD TV. I use Air Video Server to stream videos from a laptop connected to the same LAN.
    Even though both devices are connected to a LAN I see usage of Internet bandwidth on my Telstra account.
    can someone explain to me why ATV needs Internet to stream local videos?
    Regards,
    Kiran

    I noticed the same problem with my ATV2. I have a laptop connected to a router at my cottage and it is not connected to the internet. As soon as i upgraded to 6.0 it took forever to stream movie that were in itunes. I tried both wirelessly and wired. I even bought a different brand of router and that made no difference. It worked fine before the update. When I brought the router home and connected it to the internet, it was instanteneous, but when disconnected it slowed to being unusable. I think that something changed in V 6.0 and it hasn't been corrected yet becuase I just updated to the latest version and it made no difference.

  • Usage Report Filter

    Hello Skype,
    We are a language company considering purchasing Skype business/manager. Let me explain our intended use:  we would have one central account from which we would be calling our clients, however not Skype-to-Skype but Skype-to-Phone, as a medium for providing our services. There are a few features under the usage reporting that would therefore be essential for our business, however it is unclear if they are available.
    These include:
    The ability to create filtered usage reports based on each phone contact. We need to be able to provide proof of call times and durations, but client specific.
    The ability to see on the filtered usage reports that the call was made even if the client didn’t pick up and be able to show specifically that the client did not pick up.
    Are these features available?
    Thank you and best regards,
    Stephanie

    Hi, Stephanie,
    I suggest you reach out to the Skype for Business people ...
    Using Skype in your businessTransform the way your business works with cost effective and collaborative tools.Contact our solutions team
    Best regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • What is the actual bandwidth usage?

    When I use Adobe Connect I am online and broadcasting for about 4 hours a day, for 10 days at a time. I only do screen sharing and voice -- no video.
    I have DSL Internet. The DSL upload speeds are very poor (under 1Mb). To speed things up, I thought I'd look into getting a 4G hotspot, but I'm worried about actual bandwidth usage, since such plans have a practical limit of 5 or 10Gb per month.
    My off-hand guess is that If I were to watch a video of myself, I guess it would be a couple of gigs for a four hour, non-HD video. So by that very rough guestimate, I'd hit 20Gb pretty easily over the 40 hours of my meeting. Is that right the way to think about it?
    Has anyone monitored actual consumed bandwidth for a simple meeting of one person talking and sharing his screen? I'm not looking for definitive answers -- just some ballpark estimate of what such a meeting consumes each hour...
    Thanks! :-)

    Page 22 of this document will give you some numbers that will allow you to estimate the total data used for a meeting. Keep in mind these numbers are what Adobe saw as average consumption, yours may be higher or lower.
    http://www.adobe.com/content/dam/Adobe/en/products/adobeconnect/pdfs/web-conferencing/Adob e-Connect-9-Technical-Guide.pdf

  • Adobe CC - Bandwidth usage

    I live in the sticks, unfortunately my only option for internet is satellite which has limited monthly bandwidth usage. My question is, Abobe CC constantly send and receive data, which would use my bandwidth usage?

    Hi Fabian,
    Thanks for your interest in Typekit!  The font licensing through Typekit does not include the option to embed the fonts in a native app. In order to use a font in an app, you will need to purchase a separate license from the foundry.
    For more details, please refer to the "Typekit Font Licensing" help page.
    We hope to be able to support embedded fonts in the future, but it isn't available at this time. Sorry I couldn't be of more help; please let me know if you have any other questions.
    -- liz

  • High bandwidth usage while inactive

    Twice today I've glanced at Activity Monitor's Dock icon, which I have set to view Network Usage, and saw a large amount of data streaming continuously through my internet connection.
    This morning when I noticed it for the first time, I poked around my system, and after not seeing any other programs (Safari, Software Update, etc.) being active, I tried quitting Messages Beta - and the bandwidth instantly dropped down to nothing. At that time, it was moving around 60KB/sec upstream, and probably around half that downstream according to Activity Monitor.
    A few minutes ago this evening, I saw it happen again - my Activity Monitor was showing heavy continuous bandwidth usage. This time I simply set my status to 'Offline' in Messages Beta and once again it instantly dropped down to nothing. This time the bandwidth was closer to 160kb/sec upstream, and half that downstream! When I changed my status back to 'Available' a few seconds later, everything continued on normally, with almost no data usage.
    I had no active chats going, never used video, screen or file sharing - so what in the world is Messages Beta doing with so much data streaming? I'm quite mystified, and wondering if anybody else has seen this happen....

    The issue seemed to be local network traffic.

  • [Solved] Unknown bandwidth usage coming from pacman mirrors

    Each 1 or 2 days, there is a brief unknown bandwidth usage coming my
    pacman mirrors, downloading about 15-20mb. I would like to know what is
    responsible for this behavior.
    During the bandwidth usage, I did the following commands to get some hints:
    $ tshark -i wlan0
    18.601379 192.75.96.254 -> [ my_ip ] TCP 1506 [TCP segment of a reassembled PDU
    18.604131 192.75.96.254 -> [ my_ip ] TCP 1506 [TCP segment of a reassembled PDU]
    18.604139 [ my_ip ] -> 192.75.96.254 TCP 66 41989 > http [ACK] Seq=173 Ack=3281761 Win=239040 Len=0 TSval=14001135 TSecr=3310908095
    $ sudo netstat -apntu
    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 [ my_ip ]:41989 192.75.96.254:80 ESTABLISHED 5331/python3
    where 192.75.96.254 seems related to the domain name of my first mirror in the mirrorlist:
    http://mirror.its.dal.ca/
    Last edited by ramboman (2012-03-04 22:30:02)

    In cron.daily, there is a "pkgfile" :
    #!/bin/bash
    . /etc/pkgtools/pkgfile.conf
    if (( $UPDATE_CRON )); then
    /usr/bin/pkgfile --update >/dev/null
    fi
    from package : pkgtools
    which seems to be the main suspect.
    Thanks fukawi2 to make me figure it out.

  • Wifi Calling - Bandwidth usage

    Hi there I have bought an iPhone 6 so that I can use the wifi calling at home due to lack of phone signal. I am trying to find out the bandwidth usage for a call using this service? If I have a few friends around and my home internet is a terrible 1Mb down and 0.5 up - when will teh calls start bombing or jittering etc? I also work for a tech company and I'm interested how this will effect our client's office internet or their public wifi for the hospitality clients  Thanks in advance Neil

    Hi ,
    Thanks for joining the EE Community.
    To use WiFi calling we recommend a minimum connection speed of 1mbps.
    Thanks
    James

  • N/W Bandwidth usage

    All,
    I was wondering of there is any documentation around the typical network bandwidth usage by the BOE XI R2 application (InfoView/WebI)? As part of the deployment of some new servers here, before they can allocate us the appropriate bandwidth, the network team wants us to give them some numbers around what are the typical data transfer rates on the network pipe. For this, we have assessed the total number of concurrent users of the application, but there isn't really any way for us to gather the data usage rates.
    Does anyone know if the PSO/PG/SC or another group has any information about this - where they may have run tests and gathered results fro typical data bandwidth usage rates when running WebI reports via InfoView?
    I know this is a rather unusual request, but we don't have an option - the network team won't move until we have a good backing from the vendor (BOBJ/SAP) about the "recommended" numbers for this!
    Any help will be greatly appreciated!
    Cheers,
    Sarang

    Denis,
    Thanks for the response! That was my first answer to them also, and something that I have already asked the team to take a look at on our side.
    In the meanwhile, I wasn't sure if the PG or PSO runs any benchmark tests every now and then, from data gathered from the the most typical app usage by a group of clients. I remember seeing something in the past about load testing from the PG, but not sure if something like this exists for n/w b/w usage.
    I think your idea still is the best starting point, but benchmark results (if any) would be a great help!

  • Determining actual DSL bandwidth usage

    Hello All,
               I am seriously considering going to truly wireless (MiFi) internet after years of using DSL service.  However, there's one thing I have no data on:  my actual bandwidth usage month by month.
               Obviously I know I can't go back to day one and get this data, but I find it impossible to believe that it cannot be obtained relatively easily.  There is an old thread from 2010 where someone implied that one could query the DSL modem or modem/router could be queried to get this data.  I was not able to post a reply on that thread, and I presume that's because it's closed to new messages.
                Right now I have the latest D-Link router from Verizon and am able to log in to it without problems.  But this particular router has more possible options on more web pages (or their equivalent) than I've ever seen before.  Although I am a "tech geek" I have no idea where to look among the myriad options to seek out this data.
                If anyone has an answer as to how to query this router, or knows of a web resource that tells you how to do this "generically," I'm sure I can do so after a little noodling around.
                Thanks in advance for your assistance.
    Brian

    I'm not the most familiar with the D-Link routers Verizon hands out, but what you're looking to find is some information on the WAN or "Internet" end of the modem for how many bytes of traffic you have sent and received. This information may be for when the router was last rebooted or it may be from the last time your connection re-connedcted if it has dropped, so it isn't really accurate when it comes down to a breakdown of things. If you can get a byte count, it is easy to convert to Megabytes or Gigabytes from that point (Factorsof 10 in a general sense). By definition a Kilobyte is 1024 Bytes, but in some cases a factor of 10 is applied so a Kilobyte is 1000 Bytes. A Gigabyte can be 1024 or 1000 Kilobytes depending on how the data is being measured like previously mentioned.
    So, 40,960 Bytes / 1024 = 40 Kilobytes / 1024 = 0.039 Gigabytes.
    Considering how large (or small) the data plans tend to be on a Mi-Fi device, consider the type of network traffic you currently have and gauge it against future use. If you currently have gamers in the house, a Mi-Fi should already be off the table as a full blown replacement as cellular connections are poor quality connections for playing video games on. Not to mention, games and patches can consume the cap quickly if the gamer has a lot of games that they play. Also, if your home is Netflix or YouTube heavy, without turning down the video quality you'll find it's quite easy to run over a cap. On a Mi-Fi myself, I have to restrict my YouTube access since I am picky about low quality video, and force everything to HD. I can slip in a few videos on a Grandfathered 3GB plan with Verizon but if I watch some of the common, 20 minute videos I watch, that's a Gigabyte per video on average. My normal net usage would burn me through the cap in less than an hour.
    Just some food for thought, but keep in mind Verizon will most likely be unable to provide any sort of data usage counter. You may need to use third party routers or software in order to determine your usage per month.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

Maybe you are looking for

  • Ipod in not recognised by windows or itunes. PLEASE HELP!!!!!!!!!!

    I have a 5th gen 30gb video ipod which was fine up until the start of january when i tried to connect my ipod to my laptop and it was not recognised by windows as a usb device, i'v been through the device manager and can not find it there. USB port a

  • New mac ,illustrator and photoshop don't work, any compatible downloads

    Help, Just bought a new Mac and discovered the old CS2 illustrator and Photoshop are not compatible-.so does this mean I have to buy new ??   Bit miffed off to say the least !   Is there any alternative that can be downloaded ? Any advice gratefully

  • Parameter passing  into column

    Hi , We have one prompt as TimeHorizion. How can we pass this value in column formula. I mean based on user selection I should pass TimeHorizion value in to column formula I wrote following query in column formula but it is not working properly CASE

  • How to receive and send V/A signal in one host?

    The sample code VideoTransmit.java,sames only can send the V/A signal over network,but the sending host cannot receive the signal. I hope receive and send signal in one host,what should I do? s.

  • New PowerBook Ti User Wants Input on BEST Carrying Case

    Just got a beautiful 15-inch Titanium, hardly used! I'm so excited, but have become quickly confused about choosing a PowerBook Case and additional accessories. This is my first notebook, so every case, stand, pad, skin, protector I read about sounds