WVC54G setup for third party applications and also firmware query.

I have resurrected someone's old WVC54G and installed it to work initially wirelessly to my netwark and then my Windows 7 64-bit laptop. I did an initial reset, then set up the ip address etc. to the system here, and everything seems to work even though the viewer and recorder software installer gave a Windows error message.
I'd like to be able to look at the camera via the VLC viewer application, and I see from another posting here that this should work. Is there a guide anywhere showing how to do this? Ideally I'd like to understand how to interface the camera so that I can test various third party camera applications.
Also, the Linksys setup software says the firmware version is V5.10, Feb 21, 2005, which seems a much higher number than it should be. Is this right?

Try downloading the viewer and recorder utility from the linksys website under the download section which is pretty user friendly.
To view it in VLC player, you can use the option 'open url' in file menu and type in http://your camera's IP
The latest FW for wvc54g is ver. 2.11. The version you have mentioned might be software version.

Similar Messages

Submitting to third party application and post back creating refresh issue

Hi,
I am doing a web application in which I need to hit a third party application from a view and come back to the same view if the third party sends a response back.
For this I am getting the adfCtrlState and submitting it as a postbackurl for the third party.
After coming back to the same view from the third party, I need to go to the next activity in the taskflow without any user interaction.
I am using the following code to find the next activity
<af:commandButton text="AutoSubmit" id="cb2"
action="processResponse"
binding="#{pageFlowScope.responseBean.braodCastAction}"
visible="false"/>
In the responseBean : I am using the RichCommandButton to broadcast event
RichCommandButton myEvent;
public RichCommandButton getMyEvent(){
if(conditions satisfied){
myEvent.broadcast(new ActionEvent(myEvent));
The above code is executing the action(processResponse) specified in the commandButton.
But it is not able to find the next activity in the taskflow, if a hit F5(refresh) it is rendering the next view in the taskflow.
My primary requirement is to execute or render the next method call activity or view after coming back from the third party application without user interaction. Is there any other way to go to the next activity without broadcasting the event ?*
Thanks
Mohan.

Hi there
I see some flaws with that.
J41 wrote:
It would act somewhat like an LMS where users could post their dev files on a network share.
Dev files need to always be local. Placing on a network share for the purposes of using RoboHelp to compile or generate is risky business and may explode in your face. LMS to me means Learning Management System. Those are typically used for eLearning. RoboHelp does help systems. Captivate does eLearning. So you are losing me with your LMS reference.
When ready to review with the customer, the would use the registration tool to push the project to preview.
I'm lost. What "registration tool" are you even referring to here? Or is this what you are planning on creating and that's what you are choosing to call it?
The app would call the RH command prompt using a server side technology, in my case .NET, and supply the necessary arguments and push the generated project to preview.
There is no "preview" of projects. Preview of individual topics, sure. But not for a project. There is only compile or generate to create the final output.
Once it had been reviewed and ready, then the user could push to production.
Sounds like what one might typically accomplish using RoboHelp in a typical development cycle. You edit content on the local hard drive. If a review is needed, you compile or generate the content and place the output on a server. After approval is complete the content is then copied to the production server.
Sure sounds like you are attempting to reinvent the wheel in many situations here.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Can't visit internet for third party applications

I have an unlocked Blackberry 8900, now I am using Chinese Mobile SIM card in China.
Now I am confused that sometimes it can't visit internet (I am using edge data plan of China mobile) with other third party applications (I mean the application is not from RIM, like UC browser, gmail). Most of time these third parrty applications work well, but sometimes, these third party applications can't visit internet via edge, but Blackberry browser is working well. I have to take out battery and reboot the device.
My OS verison is v5.0.0.822, bundle 1385, platform 5.2.0.76
Today I saw below message when application could't not use edge.
Reason
net.rim.device.api.io.connection
closedException: stream closed.
How can I solve the problem?

Yes - you can do it via Terminal or do as I do - use TRIM Enabler.
Just be aware that each time you update your System software (from 10.8.1 to 10.8.2, for example) you'll have to enable TRIM all over again. Not such a big deal.
Clinton

Progress bar for third party applications

i invoke the third party application from a java program, maybe using runtime class.
what are the other ways to do invoke third party applications/programs.
how do i know how much work the third party application has finished.

What kind of a third party application is it?

Customer invoice for Third Party return and Credit Invoice???

Hi All,
Business needs third party return with vendor & customer Credit invoice.
I am fully aware that standard SAP does not support this scenario.
I am looking any other best way to implement this scenario in sap, if any body has worked on this.. I am thinking in below line:
Changing VBUK-FKSAK and VBUP-FKSAA by using program once vendor invoice generated... but not sure its impact in other area. one impact I can see its making cost negative in invoice.
Another option tried is to delink vendor & credit invoice by using 'B' Billing relevance, This is generating zero invoice if billing block is removed & PO has been created..
Please advice
Regards

Dear Neeraj L,
Can you explain the process more in detail?
Because,in 3rd party - returns will occur only after Customer rejects the goods from the Vendor. then goods has to be returned from teh Customer , but not from the Vendor.
You might thought of - Returns from Customer & then return to Vendor- which is std process? Doesnt it fit your requirement?
But in this case, there is no sales order link to Vendor returns.
Regards,
Reazuddin MD

How to clear documents and data for third party applications

Anyone can help me how to clear the documents and data for apps like facebook , i tried to delete the app and re-install but there is no change , please advise ,
thank you.

Manage the data on the device via iTunes.

Proxy support for third party applications

Hi all.
I have seen many posts by users saying that some applications cannot access the internet, while connected to a network with proxy authentication.
Ultimately, the problem lies in iOS not supporting system-wide proxy settings. We are therefore stuck with applications where the developer has not included their own proxy authentication methods. This is really pathetic in my opinion, seeing as the iPad, although primarily focused on a media and leisure based market, is actually used by a lot of people in the enterprise world.
There has not been any official announcement by Apple about this issue on other threads, or any announcement as to when support for this will be added. As a university student, I am forced to bring both my MacBook and iPad to campus, simply because I cannot access certain online services, such as DropBox, from my iPad. It actually makes me question what the point in getting the device was in the first place, as my primary intended usage is to eliminate the need for my MacBook to come with me to university.
I would like Apple to please give any response on this, especially seeing as these devices are bought by many people with the intention of using it on many different networks on the move. Please, don't get me wrong - with the applications that work, and the usage I have with my iPad as is, I really enjoy the device, and it is great in many aspects, but simple functions such as internet access for applications under proxy authentication should be a given feature.
With that all said, I have not had a chance to update to 4.3.1 yet, and I am not aware if it has been fixed yet or not - the change log says nothing about it though. Has anyone found a solution to this yet? Are some of you also experiencing it?
MrP.
EDIT: I notice that in the change log of 4.3.1, it says: "Resolves an issue authenticating with some enterprise web services". Can anyone confirm if this has fixed the issue?
Message was edited by: Padie

Yes same here, Ipad and Iphone 4S all iOS 5.1.1 behind a proxy....Safari works but pretty much none of my other Apps. proxy acceptance will be a critical blow in the war for the Enterprise market. I need access to Apps I now rely on and they simply do not work.
With MS Surface only weeks away once people start using this with 100% success through a proxy, ( not to mention real Office that works with macros and all formatting..Oh and stylus friendly too!) a lot of apple devices may start to gather dust.
Common Apple, lets move on from Toys and get serious about work too. I am guessing there are a lot of us out there trying to make ipads work at work...help us out!

Third-party applications and input method in OS 10.7

After updating to OS 10.7, the input method for Spell Catcher 10.4 does not load. Application functions in every way, except that I am am no longer able to utilize the interaction feature (i.e., can't paste from Spell Catcher to text file). What is the cause of the lost interaction feature? Who is responsible, Apple or Spell Catcher?

Spell Catcher is suspiciously silent about the input problem. The head of software development responded immediately to my first inquiries, and assured me that Sell Catcher is compatible with OS 10.7. I recall reading on the Spell Catcher site that the fault was with OS 10.7. Ultimately, the Spell Catcher official stopped communicating with me via email and references to the input problem disappeared from the web site.
I'm hoping that you're wrong about who is responsible, and that a 10.7 update will solve the problem. By the way, I experienced the same input problem after installing Grammarian Pro.
Message was edited by: juliusl2

UCCX SQL access for third party application

We have a requirement from customer to allow read access to UCCX database. This account would be used to query the UCCX database and it will use as a service account for another system.
Please let me know how create DB account on UCCX.
UCCX version:7.1
UCCX database: MSDE

Here you go:
Open the command line on your UCCX server and do the following:
List the available sql instances you can connect to (and their syntax)
osql -L
From that list you should see one that looks like:
SERVERNAME\CRSSQL
Connect to MSDE using your Windows local admin account (has admin rights in SQL)
osql -E -S SERVERNAME\CRSSQL
List the current logins in SQL
exec sp_helplogins
go
Create a user account and grant access to db_cra database:
use db_cra
go
exec sp_addlogin 'username','password'
go
exec sp_grantdbaccess 'username'
go
exec sp_addrolemember 'db_wallboard_read','username'
go
* Sorry, I don't have a 7x system anymore and cannot tell you what the role name is for admin rights. You could issue the following to get a list of other roles:
exec sp_helprole
go
Enabling Mixed Mode
Stop the Node Manager
Open Regedit and navigate to:
HKLM\Software\Microsoft\Microsoft SQL Server\CRSSQL\MSSQLServer\
Change LoginMode from 1 to 2
Start the Node Manager
*Remember to fix all HRC clients to support mixed mode (this is a manual task). See here for help on that: https://supportforums.cisco.com/message/3116762

Configure sap xi with third party application?

Hi fredz,
Can any pls explain with technical details and steps how do i configure sap xi with third party application and what type of connectivity and interfacing communication channel is preffered?
Is there any option to web-services for interfacing between SAP system-SAP XI system-Third party Application.
Pls be specific if and only if u have done this scenario.
Regards,
Ameet
Message was edited by:
Ameet Jassani
Message was edited by:
Ameet Jassani

Hi
 
This is a very generic question. There are some getting started guides available in the main XI section on SDN, and also some step-by-step guides in the wiki section. A quick search will get you tons of information.
 
The choice of connectivity and interfacing communication channel is really dependent on the capabilities of the third party system.
 
Also, to get good results on this forum, please read the <a href="https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement">rules of engagement</a>
 
Regards
Manish

Facebook does not update "likes," that people "like," after setting Facebook to an exception for "Third Party Cookies"

I recently changed all my Bookmarks to sites that are exceptions for third party cookies and turned off the acceptance of third party cookies. Facebook will not update any "likes" I get until after I reload the page. It also will not allow me to upload pictures, it says that I am not logged in which is really odd. Is this because I have switched to the https://facebook .com?

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Item category used for third party

Gurus,
need to know the item category used for third party process and its determination, kindly help.
thanks
SP

Dear Partasarathy,
there are three different processes within the third-party.
The usual third-party process (the delivery will be made directly from the third-party partner). The item category here is TAS in the standard.
The individual purchase order (the delivery will be done from third-party partner to SD-partner and then the normal delivery will be created from the sales order). The item category here is TAB in the standard.
The ALE-process is the third-party process where the purchase order (not only the purchase requisition) will be created after saving the sales order. The item category here is ALES in the standard.
I hope, this additional info helps you further.
Kind regards,
Akmal Vakhidov
Development Support IMS SD, SAP, Walldorf/Germany

How do I integrate Configurator and iPad Electronic Flight Bags with applications that utilize a third-party license and subscription that is outside of iTunes?

I am the EFB (Electronic Flight Bag) Manager for a small aviation company that are using 10 iPad with Retina Display as approved in-cockpit EFBs. Our plan is to configure and manage these iPad EFBs with Apple Configurator 1.3. We also use 2 third-party applications for charts, aviation weather, and other aviation functions that depend on a seperate license and subscription with the vendor outside of iTunes. What I am finding through my new education in Configurator is that there does not seem to be a way to maintain the subscription status with those two applications. Is there a way to isolate those two programs from Configurator control? Better yet, is there a way to integrate them with Configurator without losing the subscription status and loss of huge amounts of data that are on a regular, FAA regulatory update schedule? Configurator is awesome at managing iTunes managed applications and is perfect for our company. I need to figure out how to make Configurator work with a subscription-based application. Please help!

Here is what is surmise reading ForeFlight web site.
There is the app and the data.
You manage the app through configurator or some other MDM. The acquiring and paying for the data is independ of the configurator. You can buy the data through the app or online. You may want to buy online. This way you can do the buying independent of the ipad. Once you have purchased, the app will download the data. You may have to tell it to procedure with download panel.
Some people use configurator to install mdm app then do the rest of the configuration from MDM. This allows wifi updates of configuration.
You end up with managing apps from MDM. You manage with your data from from the online account. You enter appropriate password on each ipad to gain access to the data. App will download your data. My need to tell it what to download in app.
How do I buy a subscription?
Purchasing a subscription is fast and easy! You can purchase a subscription online or inside the app using your iTunes account.
To purchase a subscription inside the app, launch ForeFlight Mobile and then tap the 'Account' icon. You'll see a list of available plans to purchase in the 'Subscription Plans' table. Tap the one you want to buy. Follow the instructions for entering your email address and iTunes password. When the purchase is complete, you'll receive confirmation inside the app and immediately be able to continue using ForeFlight Mobile.
To purchase a subscription online, visit our secure online ordering page. You'll be asked to choose a plan and enter your credit card information. After your purchase is complete, you'll receive an email with a password to sign into the app on your phone or iPad.
http://www.foreflight.com/support/subscription#66
How do I update charts, plates, and the airport database?
ForeFlight Mobile has a download manager designed to make selecting, downloading, and updating your data easy- whether you like to store a little or a lot. Tap the Downloads icon from within the ForeFlight Mobile app. The Download Manager allows you to select the types of items you want to download and store on your device. ForeFlight Mobile will contact our servers and display the available updates. If you download updates that are not yet effective (future data sets) they will automatically be used by the software when they become effective. The download manager lets you pause a download and resume it later.
http://www.foreflight.com/ipad/faqs/#11

Reinstalling OS 10.9 and third party applications

After trying the many suggestions given here and still having problems with too many "applications quit unexpectedly" I have decided to reinstall 10.3.9. I would like to anticipate what I face by doing this---lost passwords, etc??? Also, how do I identify what are third party applications? Not usually a conspiracist, but five times this pm when i have tried to visit the votenader site, a crash has occured within seconds after I get to the site lol.

Panthetic,
Web browsers, such as Firefox and Camino compatible on 10.3.9, are still being updated by their developers to keep pace with changing web standards. Safari is being updated but not for 10.3.9 and it's version of Safari (1.3.2 is the farthest that a Panther user can update).
Camino will feel very similar to Safari and can be customized to feel even more like it but the benefit is that it will function on sites that Safari 1.3.2 can no longer handle (Google Maps etc.).
Personally, I would leave Safari and Firefox alone on your Mac for now as it's nice to have a backup browser if you have any problems with another that you are using (ie. Camino). If your available disk space is that low perhaps trash one but hold on to at least one spare browser.
If you suspect a third party application of causing system problems I would look first to applications that embed themselves or intergrate more fully into the system. Applications that perhaps add a menubar icon or a system preference pane of it's own. Those would more likely cause problems with the system than a browser I should think.
Can you not remember which apps you have downloaded as third party applications?
"As before, how do you identify which ones are?"
I don't have a method of determining original installed apps that came with your computer. Alot of that depends upon what model you have and what software was bundled with it originally. I'm from the school of "if I don't know for sure don't mess with it" so you don't stand the chance of messing up the system. If there are particular apps that you have questions about deleting you are probably wise to post back and ask before deleting them.
littleshoulders
Message was edited by: littleshoulders

How can I set up printing to queues on a Windows 2008 server directly from the iPad apps and not from third-party applications without using AppleTalk or Bonjour?

We have a Windows 2003/2008 server-based network with a dedicated print server which we would like to be able to print to over Wi-Fi. How can I set up the printers on the iPad without downloading a third party application such as Print Central or Print N Share? I want to just click the arrow and "Print" then choose the printer, which doesnt show up. I want to be able to use the existing TCP/IP-based network that we have to reach these queues, not having to install Bonjour or AppleTalk to reach them.
Thanks,
KMQ7

This would really be the "Holy Grail" right now. I think this a feature that every large organization requires. AirPrint works on a small scale, but is not really an enterprise class application. In addition it uses the Bonjour discovery process which is difficult in a large LAN WAN environment. For those that would remind me, I am aware of the enhancement link

WVC54G setup for third party applications and also firmware query.

Similar Messages

Maybe you are looking for