WVC54GCA Installation issue

I have read a few posts re installation issues and 192.168.1.115 ip errors trying to get the camera to work. I dont find a resolution that helps me so thought I would post before I launch the camera with trash!
Im hooked up on a netgear WNR854T router on with gateway 192.168.11.1. When running setup the settings reproted back are;
Status:             Unconfigured
Camera Name:  MyCamera
NW Config:       DHCP
IP:                   192.168.1.115
SN Mask          255.255.255.0
DF GW            0.0.0.0
I then proceed through set up, setting both DHCP and static on different attempts and manualy configuring wireless as it fails to find on search or after many refresh.
Encryption is - WPA-PSK [TKIP] + WPA2-PSK [AES]
I have tried many hard reboots all without success, receiving "Save configuration has failed!"
I am running W7 and camera does not appear in [Network] and so far has not apperead under [Attached Devices] on router.
HELP!!!!!!!!!!!!

WVC54GCA Camera works on the DHCP. If you hardwired the Camera to the Router, your router should automatically assign a IP to your Camera. To know the camera IP address you need to login to the camera setup page and under the DHCP Client table list you will find the Camera IP address. Using that IP address you can login to your camera and make the changes on it.
If its not listed under the DHCP Client table list, then you need to Press and Hold the reset button on your camera for 30sec.. Release the Reset button and then after 30sec plug the power to the Camera.... Now check if the Camera is listed under the DHCP Client table. If yes then you can use that IP address to login to the camera setup page and make the changes on your Camera. 

Similar Messages

  • Lightroom 4.2 Installation Issue

    Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct.  4.2 install ran fine.
    I've read through the posts in the Lightroom forum regarding  LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
    1) Downloaded the installation software twice.
    2) Ran the setup program in admin user mode.
    3) Ran the install in admin user mode.
    4) Get the following error in a Windows Installer window:
    The feature you are trying to use is on a network resource that is unavailable.
    Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
    Use source:
    c:\Users\RMJF\AppData\Local\Temp\{...}
    What I have found (after displaying hidden AppData folder):
    The location where the .msi file resides is different from the one defaulting in the above window.
    I select this alternate path, but still cannot complete the installation.
    Furthermore, when I cancel the install, I get this error:
    Adobe Photoshop Lightroom 4.2 64-bit Installer Info
    Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
    I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
    Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
    The installation source for this product is not available. Verify that the source exists and that you can access it.
    All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
    So, looking for suggestions.
    Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
    All quite frustrating.  Hope you can get me to a speedy solution.
    (System info:  Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare!  Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well.  No other apps are running during the install.)
    Message was edited by: marzo19

    untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
    even the microsoft fixid diden't help.
    So also desperate.

  • Installation issue on opensuse 11

    Hey All,<br /><br />Im a Windows guy still struggling with Linux set-upsso take it easy on me! :)  and Im having a hard time getting blaze installed and running.<br /><br />This is what Ive done so far.  I've successfully set-up the latest copy of openSuse11 64 bit version with: <br />  Tomcat 6.0.16 (Tested and running)<br />  ANT 1.7<br />  JAVA SDK & JDK 6<br />  Junit (ant-junit, junit, junit-javadoc, junit-manual, libcppunit-1_12-0)<br />  Downloaded both blazeds.war and blazeds_src_3-0-0-544.zip<br />  From Tomcat Manager I uploaded the blazeds.war file successfully.<br />  I unzipped the zip file into root/blazeds and from a command prompt ran     ant.  These are the errors Im getting:<br />     *  [taskdef] Could no load definitions from resource net/sf/antcontrib/antcontrib.properties.  It could not be found.  (Repeats about a dozen times)<br />     *  BUILD FAILED<br />     *  /root/blazeds/build.xml:445:  The following error occurred while executing this line:<br />     *  /root/blazeds/resources/fds-ajax-bridge/build.xml:52  Problem:  failed to create task or type if Cause:  The name is undefined.<br />     *  Action:  Check the spelling<br />     *  Action:  Check that any custom tasks/types have been declared<br />     *  Action:  Check that any <presetdef>/<mac  rodef> declarations have taken place.<br /><br />Variables:<br />env | grep _HOME<br /><br />ANT_HOME  = /usr/share/ant<br />JRE_HOME =/usr/lib64/jvm/java/jre<br />JAVA_HOME =/usr/lib64/jvm/java/jre<br />SDK_HOME =/usr/lib64/jvm/java/jre<br />JDK_HOME =/usr/lib64/jvm/java/jre<br /><br />Any ideas?<br />Brad

    Hi Alex,
    Sorry I've been away and just got back.  Presently I'm working from jrun4 and would like to use blazeds instead.  Once my projects get going I would need the ability to use my customers already made linux/tomcat boxes and just plug in blaze.
    I look forward to your answer.
    Brad
    On Fri, Aug 1, 2008 at 12:57 PM, Alex Glosband
    <
    [email protected]> wrote:
    A new message was posted by Alex Glosband in
    Configuration and Getting Started Discussion --
      Installation issue on opensuse 11
    Are you just trying to install and run BlazeDS? Why do you need to build from source?
    -Alex
    View/reply at
    Installation issue on opensuse 11
    Replies by email are OK.
    Use the
    unsubscribe form to cancel your email subscription.

  • Forms 10g Installation issue on windows 7 Professional service pack 1

    hi
    I am trying to install oracle forms 10g  64 bit windows 7 Professional service pack 1 ..
    Below are 2 files that i am using ..
    ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
    ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
    But it failed but the error is .. 
    Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.    Actual 6.1     Failed <<<<
    just wondering if there are any workaround ..

    Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7.  You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified.  You must have a My Oracle Support account to obtain the patch.
    Now, to your question - is there a workaround; the answer is yes.  There are known issues with this installer.  I'll list them and their workaround.
    1.  The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
    Workaround:  Right-click the Installer and select Properties.  Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for:  Windows XP SP3).
    2.  The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
    Workaround:  You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes.  See this Microsoft article for more information on changing VM settings.  http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
    This change will require you to restart your computer.  After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
    3.  The Oracle installer MUST be installed as an "Administrator". 
    Workaround:  Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab.  Click the "Run this program as an administrator" checkbox.
    4.  Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
    Run the Oracle installer and it should now install succesfully.
    Craig...

  • HP Photosmart D7360 -- Driver/Installation issue

    For some reason my HP Pavillion Laptop no longer recognizes my HP Photosmart printer.  I have downloaded the drivers, I have the disk and no matter what I do, I can't get the printer driver to install. 
    It tells me that it can load verythign BUT the driver.  Any ideas?
    Thanks
    jstjohn

    Welcome to the forums @Pierre-Louis ,
    I read about the installation issue you're having with your Photosmart C4280 on Windows 8. I have a guide that I have heard successful results from and I hope they work for your scenario as well!
    Click this link to get started: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
    Good luck
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Photoshop CS6 Installation issues

    Anyone on 10.7.5 having PSCS6 installation issues after trying to apply update via Creative Cloud?

    This link took me to location where I chose the appropriate version of Bridge update and it worked.  My verion was updated to 5.0.1.23
    http://www.adobe.com/support/downloads/product.jsp?product=108&platfor m=Windows

  • NWDS installation issue - "Please wait... completing the install"

    Hi all,
    I got the same "Problem" each time I update my NWDS.
    [Re: NWDS installation issue.|Re: NWDS installation issue.]
    After the installation, when I start the NWDS I get always the message:
    "Please wait... completing the install"
    If I create a new Workspace this really solves the problem but I don't like to create every time a new workspace after an update and copy all my projects back to this new workspace.
    Is there no other solution around? I think I'm not the only one who has this troubles, am I?
    Regards,
    Stefan

    Hi all,
    I solved this problem by myself. So for everyone who is interested in how to solve this problem:
    Just delete the folder .config in
    \workspace\.metadata\
    During the next start of NWDS this folder will be created and everything will work as excpected!
    Stefan

  • Application Runtime Environment installation issue

    Hi,
    JDeveloper 11.1.1.3.0
    OS: Solaris SPARC
    I am trying to install the application runtime environment and I am getting the below error. Please advice me on how to resolve this issue.
    JAVA Version in Solaris SPARC :
    weblogic@comm1 ~/Installs $ java -version
    java version "1.5.0_24"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_24-b02)
    Java HotSpot(TM) Server VM (build 1.5.0_24-b02, mixed mode)
    Error:
    weblogic@comm1 ~/Installs $ cd Disk112/
    weblogic@comm1 ~/Installs/Disk112 $ cd Disk1/
    weblogic@comm1 ~/Installs/Disk112/Disk1 $ ./runInstaller
    ./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
    ./runInstaller: syntax error at line 299: `count1=$' unexpected
    Thanks,
    Rajesh

    Hi,
    I have installed the jdk 64bit version and tried the application runtime environment installation but I am still getting the same old error. Here it is..
    weblogic@dwlsalescomm1-c2 ~/Installs/Disk112/Disk1 $ ./runInstaller -jreLoc /apps/wls/WL10/jdk1.6.0_21/
    ./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
    ./runInstaller: syntax error at line 299: `count1=$' unexpected
    JDK Version:
    WL10/jdk1.6.0_21/bin $ ./java -d64 -version
    java version "1.6.0_21"
    Java(TM) SE Runtime Environment (build 1.6.0_21-b06)
    Java HotSpot(TM) 64-Bit Server VM (build 17.0-b16, mixed mode)
    Please advice me on how to resolve this installation issue.
    Thanks,
    Rajesh
    Edited by: Rajesh on Mar 15, 2011 8:28 AM

  • Acrobat Installation Issues due to Computer Switch

    My surface bit the dust last week and I had to replace it. Downloaded acrobat successfully tot eh surface but then that apparently cut off access to the adobe pro on my home computer.
    How do I get acrobat re-installed without the "you don't have a license" error message.
    I am on a subscription plan
    P

    licensing issue-the system does not recognize that I have a license so I would love to eb able to speak with a real person so they coudl go and look at my purchase and fix the problem.
    I'll be calling on Monday- right now I am using a trial version again but need to fix before the 39 days are up Peter Collopy, CSP, CIH, CHP
    Damariscotta, ME518.859.1944 (cell)
          From: RahulTyagi4you <[email protected]>
    To: Peter Collopy <[email protected]>
    Sent: Sunday, March 1, 2015 5:30 AM
    Subject:  Acrobat Installation Issues due to Computer Switch
    Acrobat Installation Issues due to Computer Switch
    created by RahulTyagi4you in Acrobat Installation & Update Issues - View the full discussionHi Peter Collopy, Is Acrobat properly installed on your system?Please confirm if you facing installation issues or licensing issues? Regards,Rahul Tyagi If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240431#7240431 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240431#7240431 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Adobe AIR Installation Issue

    Hi,
    I am facing an installation issue with AIR file on multiple machines.Though I am able to install it on some machiens.Below is the log for same.
    [2011-08-05:11:56:02] Application Installer begin with version 2.7.0.19530 on Windows XP x86
    [2011-08-05:11:56:02] Commandline is: E:\ASMTv3India\ASMT2011_Beta-4Aug2011\ASMT2011_Beta.air
    [2011-08-05:11:56:02] Installed runtime (2.7.0.19530) located at c:\Program Files\Common Files\Adobe AIR
    [2011-08-05:11:56:02] Unpackaging file:///E:/v3India/App_Beta.air to C:\Documents and Settings\Media\Local Settings\Temp\fla2D.tmp
    [2011-08-05:11:56:03] Application signature verified
    [2011-08-05:11:56:03] Unpackaging/validation complete
    [2011-08-05:11:56:03] No app located for appID 'App2011-Beta' and pubID ''
    [2011-08-05:11:56:12] Converting unpackaged application to a native installation package in C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp
    [2011-08-05:11:56:18] Native installation package creation succeeded
    [2011-08-05:11:56:18] Starting app installation to C:\Program Files. Installing app ASMT2011-Beta version v3.010 using the source file at file:///E:/v3India/App_Beta.air
    [2011-08-05:11:56:18] Installing msi at C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp\setup.msi with guid {EBF346A2-FD8C-08C2-07E8-AA91ABD1CAE6}
    [2011-08-05:11:56:21] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
    [2011-08-05:11:56:21] Rolling back install of C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp\setup.msi
    [2011-08-05:11:56:21] Rollback complete
    [2011-08-05:11:56:21] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
    [2011-08-05:11:56:28] Application Installer end with exit code 7
    Please do the needful.
    Thanks & Regards
       Vishal

    Ok, I understand.  So before we continue, we really need to figure out what the exact error is.  Can you, on at least 2 systems, generate the MSI logs we'll need?  Here's a document that explains how to enable logging and where to find the logs once they've been created:
    How to enable Windows logging
    Once you've enabled logging, try installing again.  Grab the newly created msi logs and either post here or email me at [email protected]  I'll examine the logs and see if we can find a common issue between the systems.
    Thanks,
    Chris

  • Windows 2008 r2 windows installer issue error 1719 when install Backup exec 12.5

    Hi all
    After a epic weekend of rebuilding our exchange server I have tried to reinstall Backup exec 12.5 64bit, this was installed with no issues during the last build, however at the end of this build I went to reinstall Backup Exec 12.5 and it is failing with
    error 1719 Windows installer issue.
    I have looked on many sites and tried many things non of them have worked, has anyone managed to resolve this issue.
    Dave
    DJH

    Hi Lenora
    See below
    Symantec Backup Exec (TM) 12.5 for Windows Servers Installation Log
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe
    03-19-2013,17:33:38 : CSetupApp::GetInstalledGUID
    03-19-2013,17:33:38 : CSetupApp::LoadSetupXML
    03-19-2013,17:33:38 : CSetupApp::ScanXML
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\Setup.xml
    03-19-2013,17:33:38 : MSI File Name = WindowsInstaller-KB893803-v2-x86.exe
    03-19-2013,17:33:38 : MSI Version = 3.1
    03-19-2013,17:33:38 : MSI Package Name = Symantec Backup Exec for Windows Servers.msi
    03-19-2013,17:33:38 : System Central Processor = 64
    03-19-2013,17:33:38 : Product Type = SETUP_BEX64
    03-19-2013,17:33:38 : Product Name = Symantec Backup Exec for Windows Servers
    03-19-2013,17:33:38 : Current Installing GUID ={BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : Product Version = 12.5
    03-19-2013,17:33:38 : CSetupSupport::IsValidMSIPackage
    03-19-2013,17:33:38 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Symantec Backup Exec for Windows Servers.msi
    03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : {BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:33:38 : Equal PID
    03-19-2013,17:33:38 : Product version: 12.5.2213
    03-19-2013,17:33:38 : StartBESequence
    03-19-2013,17:33:38 : Executing BE_PreCheckInstall
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:33:38 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:33:38 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:33:38 : Executing StartBESequence
    03-19-2013,17:33:38 : Pulling user data from the MSI
    03-19-2013,17:33:38 : Upgrade state set to 0
    03-19-2013,17:33:38 : Executing SSO::PullDataMSI()
    03-19-2013,17:33:38 : Executing CDlgCAS::PullDataMSI()
    03-19-2013,17:33:38 : MSI processing complete
    03-19-2013,17:33:38 : Pulling user data from the command line
    03-19-2013,17:33:38 : COMMAND LINE: Checking UIMODE value
    03-19-2013,17:33:38 : COMMAND LINE: Checking for program group placement value
    03-19-2013,17:33:38 : COMMAND LINE: Checking for main feature selection
    03-19-2013,17:33:38 : COMMAND LINE: Checking for serialization values
    03-19-2013,17:33:38 : CDlgChooseCustom::PullDataSilent
    03-19-2013,17:33:38 : After check for parameter file exists.
    03-19-2013,17:33:38 : CDlgLocalChooseCustom::Pass
    03-19-2013,17:33:38 : After Check for INSTALL_CHOICE.
    03-19-2013,17:33:38 : After Check for INSTALL_TYPE.
    03-19-2013,17:33:38 : After Check for INSTALL_MODE.
    03-19-2013,17:33:38 : CDlgLocalChooseCustom Pass Function end.
    03-19-2013,17:33:38 : Agent for Microsoft Exchange Server was added for evaluation
    03-19-2013,17:33:38 : Agent for Microsoft SQL Server was added for evaluation
    03-19-2013,17:33:38 : Ignoring the TSM switch.
    03-19-2013,17:33:38 : COMMAND LINE: Checking for service account values
    03-19-2013,17:33:38 : Not in Maintenance mode
    03-19-2013,17:33:38 : Getting the Silent Params.
    03-19-2013,17:33:38 : COMMAND LINE: checking for SSO values
    03-19-2013,17:33:38 : COMMAND LINE: checking for DlgChooseDBServer values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for tape drivers values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for TSM values
    03-19-2013,17:33:38 : COMMAND LINE: checking for CASO values
    03-19-2013,17:33:38 : COMMAND LINE: Checking for clone values
    03-19-2013,17:33:38 : COMMAND LINE: Checking progress settings
    03-19-2013,17:33:38 : COMMAND LINE: Checking for NOINSTALL value
    03-19-2013,17:33:38 : Setup Command Line = "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\setup.exe"
    03-19-2013,17:33:38 : List of switches set follows:
    03-19-2013,17:33:38 : /DEST: = C:\Program Files\Symantec1\Backup Exec\
    03-19-2013,17:33:38 : /SNO: = 0930292112010690
    03-19-2013,17:33:38 : /USER: = backup
    03-19-2013,17:33:38 : /DOM: = ACCENTPRESS
    03-19-2013,17:33:38 : /PASS: = ********
    03-19-2013,17:33:38 : /TS:
    03-19-2013,17:33:38 : /TD: = ALL
    03-19-2013,17:33:38 : /DOCS:
    03-19-2013,17:33:38 : /LOADER:
    03-19-2013,17:33:38 : /AOFO:
    03-19-2013,17:33:38 : /EXCH:
    03-19-2013,17:33:38 : /SQL:
    03-19-2013,17:33:38 : /NTA:
    03-19-2013,17:33:38 : /RAULUS:
    03-19-2013,17:33:38 : /DBSERVER:
    03-19-2013,17:33:38 : /DBINSTPATH: = C:\Program Files\Microsoft SQL Server\BE\
    03-19-2013,17:33:38 : /BACKUPDATA: = 0
    03-19-2013,17:33:38 : /MAC:
    03-19-2013,17:33:38 : Command line processing complete
    03-19-2013,17:33:38 : Install set to run in UI mode
    03-19-2013,17:33:38 : CDlgPushWelcome::Pass
    03-19-2013,17:33:40 : CinstOpenDlg::ValidateData
    03-19-2013,17:33:43 : Validating license data
    03-19-2013,17:33:44 : CDlgChooseInstall::ValidateData
    03-19-2013,17:33:44 : CDlgValidationSummary::LaunchValidationTest
    03-19-2013,17:33:44 : m_bUseNativeClient = 1
    03-19-2013,17:33:44 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:33:44 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:33:44 : Connected to SQL Server.
    03-19-2013,17:33:44 : m_bUseNativeClient = 1
    03-19-2013,17:34:05 : CDlgValidationSummary::ValidateData
    03-19-2013,17:34:05 : BEOperations::BE_GetInstalledProdCodeVersion
    03-19-2013,17:34:05 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:05 : CDlgSerialNumber Pass Function.
    03-19-2013,17:34:05 : After Check for Remote_Install.
    03-19-2013,17:34:05 : After Check for RA_INSTALL.
    03-19-2013,17:34:07 : Validating serialization data
    03-19-2013,17:34:07 : CDlgLocalChooseCustom::Pass
    03-19-2013,17:34:07 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:07 : After Check for INSTALL_TYPE.
    03-19-2013,17:34:07 : After Check for INSTALL_MODE.
    03-19-2013,17:34:07 : CDlgLocalChooseCustom Pass Function end.
    03-19-2013,17:34:07 : On Init of CDlgChooseCustom
    03-19-2013,17:34:07 : Leaving Init of CDlgChooseCustom
    03-19-2013,17:34:07 : CDlgLocalChooseCustom::OnInitDialog
    03-19-2013,17:34:07 : On Init of CDlgLocalChooseCustom
    03-19-2013,17:34:07 : Leaving Init of CDlgLocalChooseCustom
    03-19-2013,17:34:12 : Validating Local Options Data
    03-19-2013,17:34:13 : Validating service account data
    03-19-2013,17:34:13 : CDlgSSO Pass Function.
    03-19-2013,17:34:13 : After Check for INSTALL_MODE.
    03-19-2013,17:34:13 : DlgChooseDBServer Pass Function.
    03-19-2013,17:34:20 : m_bUseNativeClient = 1
    03-19-2013,17:34:20 : Validating DlgChooseDBServer data
    03-19-2013,17:34:20 : Drive C:     Required: 1102 MB     Available: 37138 MB
    03-19-2013,17:34:20 : CDlgChooseTapeDrivers Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_MODE.
    03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:20 : After Check for INSTALL_TYPE.
    03-19-2013,17:34:20 : CDlgSerialNumber Pass Function.
    03-19-2013,17:34:20 : CDlgCAS Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_MODE.
    03-19-2013,17:34:20 : CDlgClone Pass Function.
    03-19-2013,17:34:20 : CDlgClone not passed.
    03-19-2013,17:34:20 : CDlgRemoteChooseCustom Pass Function.
    03-19-2013,17:34:20 : After Check for INSTALL_CHOICE.
    03-19-2013,17:34:20 : Install Summary XML File:
    03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.xml
    03-19-2013,17:34:20 : Install Summary XSL File:
    03-19-2013,17:34:20 : D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\BE\Bin\InstallSummary.xsl
    03-19-2013,17:34:20 : Install Summary HTML File:
    03-19-2013,17:34:20 : C:\Users\ADMINI~1\AppData\Local\Temp\1\BE61998B-E5BD-4E41-B2D7-96551E6FECE0\InstallReview.htm
    03-19-2013,17:34:20 : Not Quickstart Edition
    03-19-2013,17:34:20 : Entering GetSQLAndCASOInformation
    03-19-2013,17:34:20 : Leaving GetSQLAndCASOInformation
    03-19-2013,17:34:20 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:20 : m_bUseNativeClient = 1
    03-19-2013,17:34:20 : *************** About Backing Up Exchange 2007 Servers *************** To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this
    computer.  The Management Tools can be installed during a custom install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft
    Exchange Server MAPI Client and Collaboration Data Objects package version 06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:34:21 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:34:27 : Executing InstallLiveUpdate.
    03-19-2013,17:34:40 : Installing .Net Framework 2.0 SP1.
    03-19-2013,17:34:40 : Checking for .Net Framework 2.0 SP1.
    03-19-2013,17:34:40 : Vista or Longhorn server.  Not installing .NET Frameworks.
    03-19-2013,17:34:40 : .NET Framework was detected.  Skipping install.
    03-19-2013,17:34:41 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:34:41 : m_bUseNativeClient = 1
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes;DATABASE=master
    03-19-2013,17:34:41 : SQL Server version 9
    03-19-2013,17:34:41 : SQL version returned:  9
    03-19-2013,17:34:41 : Executing SQL_GetServicePack.
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:34:41 : Connected to SQL Server.
    03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:34:41 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:34:41 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:34:41 : Connected to SQL Server.
    03-19-2013,17:34:41 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Express Edition
    03-19-2013,17:34:41 : "D:\Software\Backupexec 12.5 64bit\WINNT\INSTALL\SQLExpress\SQLEXPR.exe" /wait /qn /norestart /lv "C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt" INSTANCENAME=BKUPEXEC SQLACCOUNT="NT AUTHORITY\SYSTEM" SQLPASSWORD=""
    UPGRADE=SQL_Engine,SQL_Data_Files,SQL_Replication,Client_Components,Connectivity SAPWD=**** DISABLENETWORKPROTOCOLS=0
    03-19-2013,17:34:45 : V-225-53:  ERROR: Failed to install SQL Express BKUPEXEC instance with error 1601.  ***To search for information about this error, click
    here
    03-19-2013,17:34:45 : Please review C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt for more details.
    03-19-2013,17:34:45 : Failed to install third party products.
    03-19-2013,17:37:25 : Validating install complete
    03-19-2013,17:37:25 : Success unloading BEINSTDLGS.DLL.
    03-19-2013,17:37:25 : CLEANUP: Install has removed the following files from: C:\Users\ADMINI~1\AppData\Local\Temp\1\{BE61998B-E5BD-4E41-B2D7-96551E6FECE0}
    03-19-2013,17:37:25 : Removed files:
    03-19-2013,17:37:25 : ERROR:  Installation failed with error 1603.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,17:41:16 : Windows Operating System Version: 6.1
    03-19-2013,17:41:16 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,17:41:18 : Executing managed _Setup:
    03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,17:41:18 : Loading XML from:
    03-19-2013,17:41:18 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,17:41:18 : RawsDlgSequence::CheckInstMode
    03-19-2013,17:41:18 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,17:41:19 : Launching UI Install
    03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:41:19 : m_bUseNativeClient = 1
    03-19-2013,17:41:19 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:41:20 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,17:41:20 : CopySupportFiles
    03-19-2013,17:41:20 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,17:41:20 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:41:20 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:41:20 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:41:28 : Typical install value is set to : True
    03-19-2013,17:41:29 : m_bUseNativeClient = 1
    03-19-2013,17:41:29 : Executing SQL_GetServicePack.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:41:29 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : Executing SQL_GetServicePack.
    03-19-2013,17:41:29 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:41:29 : Connected to SQL Server.
    03-19-2013,17:41:29 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:41:29 : m_bUseNativeClient = 1
    03-19-2013,17:41:51 : m_bUseNativeClient = 1
    03-19-2013,17:41:51 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:43:04 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,17:43:04 : Install is not executing as the service account.
    03-19-2013,17:43:04 : Successfully Logged on as service account.
    03-19-2013,17:43:04 : Successfully impersonated service account.
    03-19-2013,17:43:04 : EUserName value successfully written to the registry.
    03-19-2013,17:43:04 : EPassword value successfully written to the registry.
    03-19-2013,17:43:04 : EDomain value successfully written to the registry.
    03-19-2013,17:43:09 : There were no remote computers selected for install
    03-19-2013,17:43:09 : m_bUseNativeClient = 1
    03-19-2013,17:43:09 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:43:10 : Terminal Services enabled.
    03-19-2013,17:43:10 : Terminal Services server has been set to Install mode.
    03-19-2013,17:43:11 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,17:43:11 : Executing InstallLiveUpdate.
    03-19-2013,17:44:35 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,17:44:35 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:44:35 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,17:44:35 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,17:44:35 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:44:35 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,17:44:35 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:44:35 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,17:44:35 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:44:36 : Starting Install
    03-19-2013,17:44:36 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,17:44:36 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:44:36 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,17:44:36 : Discovered Total Actions: 115
    03-19-2013,17:44:36 : The return code from the MSI is: 1601
    03-19-2013,17:44:36 : Cleaning up the symc status key
    03-19-2013,17:44:36 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,17:44:36 : Clean up Symantec installer keys.
    03-19-2013,17:44:37 : Terminal Services enabled.
    03-19-2013,17:44:37 : Terminal Services server has been set to Execute mode.
    03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,17:44:57 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,17:44:57 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:44:57 : Skipping push of remote servers and agents due to failed local install.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,17:45:25 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:45:28 : Gathering Telemetry items
    03-19-2013,17:45:28 : Failed to start the management service
    03-19-2013,17:45:28 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,17:45:28 : Sending Telemetry to Symantec
    03-19-2013,17:45:28 : Transmit Telemetry initialized.
    03-19-2013,17:45:28 : TelemetryRegistryHelpers initialized.
    03-19-2013,17:45:29 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,17:56:31 : Windows Operating System Version: 6.1
    03-19-2013,17:56:31 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,17:56:33 : Executing managed _Setup:
    03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,17:56:33 : Loading XML from:
    03-19-2013,17:56:33 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,17:56:33 : RawsDlgSequence::CheckInstMode
    03-19-2013,17:56:33 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,17:56:34 : Launching UI Install
    03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:56:35 : m_bUseNativeClient = 1
    03-19-2013,17:56:35 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,17:56:35 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,17:56:35 : CopySupportFiles
    03-19-2013,17:56:35 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,17:56:35 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:56:35 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,17:56:35 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,17:56:49 : Typical install value is set to : True
    03-19-2013,17:56:50 : Executing SQL_GetServicePack.
    03-19-2013,17:56:50 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:56:51 : Executing SQL_GetSQLServerEdition.
    03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : Executing SQL_GetServicePack.
    03-19-2013,17:56:51 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,17:56:51 : Connected to SQL Server.
    03-19-2013,17:56:51 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,17:57:37 : m_bUseNativeClient = 1
    03-19-2013,17:57:37 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,17:58:41 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,17:58:41 : Install is not executing as the service account.
    03-19-2013,17:58:41 : Successfully Logged on as service account.
    03-19-2013,17:58:41 : Successfully impersonated service account.
    03-19-2013,17:58:41 : EUserName value successfully written to the registry.
    03-19-2013,17:58:41 : EPassword value successfully written to the registry.
    03-19-2013,17:58:41 : EDomain value successfully written to the registry.
    03-19-2013,17:58:51 : There were no remote computers selected for install
    03-19-2013,17:58:51 : m_bUseNativeClient = 1
    03-19-2013,17:58:51 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,17:58:52 : Terminal Services enabled.
    03-19-2013,17:58:52 : Terminal Services server has been set to Install mode.
    03-19-2013,17:58:52 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,17:58:54 : Executing InstallLiveUpdate.
    03-19-2013,17:59:06 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,17:59:06 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,17:59:07 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,17:59:07 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:59:07 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,17:59:07 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:59:07 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,17:59:07 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,17:59:07 : Starting Install
    03-19-2013,17:59:07 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,17:59:07 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,17:59:07 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,17:59:08 : Discovered Total Actions: 115
    03-19-2013,17:59:08 : The return code from the MSI is: 1601
    03-19-2013,17:59:08 : Cleaning up the symc status key
    03-19-2013,17:59:08 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,17:59:08 : Clean up Symantec installer keys.
    03-19-2013,17:59:10 : Terminal Services enabled.
    03-19-2013,17:59:10 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:00:01 : The return code is: 0
    03-19-2013,18:00:01 : SUCCESS:  Installation has completed successfully.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:02:24 : Windows Operating System Version: 6.1
    03-19-2013,18:02:24 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:02:26 : Executing managed _Setup:
    03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:02:26 : Loading XML from:
    03-19-2013,18:02:26 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:02:26 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:02:26 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:02:26 : Launching UI Install
    03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:02:26 : m_bUseNativeClient = 1
    03-19-2013,18:02:26 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:02:26 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:02:26 : CopySupportFiles
    03-19-2013,18:02:26 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:02:27 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:02:27 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:02:27 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:03:11 : The return code is: 0
    03-19-2013,18:03:11 : SUCCESS:  Installation has completed successfully.
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:03:21 : Windows Operating System Version: 6.1
    03-19-2013,18:03:21 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:03:22 : Windows Operating System Version: 6.1
    03-19-2013,18:03:22 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:03:23 : Executing managed _Setup:
    03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:03:23 : Loading XML from:
    03-19-2013,18:03:23 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:03:23 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:03:23 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:03:24 : Launching UI Install
    03-19-2013,18:03:24 : Executing managed _Setup:
    03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:03:24 : m_bUseNativeClient = 1
    03-19-2013,18:03:24 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:03:24 : Loading XML from:
    03-19-2013,18:03:24 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:03:24 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:03:24 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:03:24 : CopySupportFiles
    03-19-2013,18:03:24 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:03:24 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:03:24 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:03:24 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:03:24 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:03:58 : Typical install value is set to : True
    03-19-2013,18:03:58 : m_bUseNativeClient = 1
    03-19-2013,18:03:58 : Executing SQL_GetServicePack.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:03:58 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : Executing SQL_GetServicePack.
    03-19-2013,18:03:58 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:03:58 : Connected to SQL Server.
    03-19-2013,18:03:58 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:03:58 : m_bUseNativeClient = 1
    03-19-2013,18:04:20 : m_bUseNativeClient = 1
    03-19-2013,18:04:20 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:05:35 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:05:35 : Install is not executing as the service account.
    03-19-2013,18:05:35 : Successfully Logged on as service account.
    03-19-2013,18:05:35 : Successfully impersonated service account.
    03-19-2013,18:05:35 : EUserName value successfully written to the registry.
    03-19-2013,18:05:35 : EPassword value successfully written to the registry.
    03-19-2013,18:05:35 : EDomain value successfully written to the registry.
    03-19-2013,18:05:36 : There were no remote computers selected for install
    03-19-2013,18:05:36 : m_bUseNativeClient = 1
    03-19-2013,18:05:36 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:05:37 : Terminal Services enabled.
    03-19-2013,18:05:37 : Terminal Services server has been set to Install mode.
    03-19-2013,18:05:37 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:05:38 : Executing InstallLiveUpdate.
    03-19-2013,18:05:50 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,18:05:50 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,18:05:50 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,18:05:50 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:05:50 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,18:05:50 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:05:50 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,18:05:50 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:05:50 : Starting Install
    03-19-2013,18:05:50 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,18:05:50 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:05:50 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,18:05:50 : Discovered Total Actions: 115
    03-19-2013,18:05:50 : The return code from the MSI is: 1601
    03-19-2013,18:05:51 : Cleaning up the symc status key
    03-19-2013,18:05:51 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,18:05:51 : Clean up Symantec installer keys.
    03-19-2013,18:05:51 : Terminal Services enabled.
    03-19-2013,18:05:51 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:06:32 : The return code is: 0
    03-19-2013,18:06:32 : SUCCESS:  Installation has completed successfully.
    03-19-2013,18:07:36 : Setup is already running.  Unable to initialize another instance of setup.
    03-19-2013,18:07:39 : Error initializing shared data
    03-19-2013,18:07:39 : ERROR:  Installation failed with error 1603. GetLastError = :0
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:13:44 : Windows Operating System Version: 6.1
    03-19-2013,18:13:44 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:13:44 : Windows Operating System Version: 6.1
    03-19-2013,18:13:44 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:13:46 : Executing managed _Setup:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:13:46 : Executing managed _Setup:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:13:46 : Loading XML from:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:13:46 : Loading XML from:
    03-19-2013,18:13:46 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:13:46 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:13:46 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:13:47 : Launching UI Install
    03-19-2013,18:13:47 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:13:48 : m_bUseNativeClient = 1
    03-19-2013,18:13:48 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:13:48 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:13:48 : CopySupportFiles
    03-19-2013,18:13:48 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:13:48 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:13:48 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:13:48 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:13:54 : Typical install value is set to : True
    03-19-2013,18:13:55 : m_bUseNativeClient = 1
    03-19-2013,18:13:55 : Executing SQL_GetServicePack.
    03-19-2013,18:13:55 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:13:56 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : Executing SQL_GetServicePack.
    03-19-2013,18:13:56 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:13:56 : Connected to SQL Server.
    03-19-2013,18:13:56 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:13:56 : m_bUseNativeClient = 1
    03-19-2013,18:14:41 : m_bUseNativeClient = 1
    03-19-2013,18:14:41 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:16:09 : Service account specified is not valid
    03-19-2013,18:16:09 : Unable to authenticate with the user and password information given for ACCENTPRESS\backup.
    03-19-2013,18:16:10 : Error validating service account credentials.
    03-19-2013,18:16:20 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:16:20 : Install is not executing as the service account.
    03-19-2013,18:16:20 : Successfully Logged on as service account.
    03-19-2013,18:16:20 : Successfully impersonated service account.
    03-19-2013,18:16:20 : EUserName value successfully written to the registry.
    03-19-2013,18:16:20 : EPassword value successfully written to the registry.
    03-19-2013,18:16:20 : EDomain value successfully written to the registry.
    03-19-2013,18:16:22 : There were no remote computers selected for install
    03-19-2013,18:16:22 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:16:23 : Terminal Services enabled.
    03-19-2013,18:16:23 : Terminal Services server has been set to Install mode.
    03-19-2013,18:16:23 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:16:25 : Executing InstallLiveUpdate.
    03-19-2013,18:16:37 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,18:16:37 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,18:16:38 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,18:16:38 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:16:38 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,18:16:38 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:16:38 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,18:16:38 : "C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,18:16:38 : Starting Install
    03-19-2013,18:16:38 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,18:16:38 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,18:16:38 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\1\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,18:16:39 : Discovered Total Actions: 115
    03-19-2013,18:16:39 : The return code from the MSI is: 1601
    03-19-2013,18:16:39 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,18:16:39 : Clean up Symantec installer keys.
    03-19-2013,18:16:39 : Cleaning up the symc status key
    03-19-2013,18:16:41 : Terminal Services enabled.
    03-19-2013,18:16:41 : Terminal Services server has been set to Execute mode.
    03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,18:17:08 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,18:17:08 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:17:08 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,18:17:09 : Gathering Telemetry items
    03-19-2013,18:17:09 : Failed to start the management service
    03-19-2013,18:17:09 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,18:17:09 : Sending Telemetry to Symantec
    03-19-2013,18:17:09 : Transmit Telemetry initialized.
    03-19-2013,18:17:09 : TelemetryRegistryHelpers initialized.
    03-19-2013,18:17:21 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,18:17:33 : TransmitTelemetry.TransmitMessage URL=http://statsbe.norton.com/n/p, Caught WebException The remote name could not be resolved: 'statsbe.norton.com'
    03-19-2013,18:17:33 : Telemetry transmission failed.  Data was not sent.
    03-19-2013,18:17:33 : The return code is: 1601
    03-19-2013,18:17:33 : ERROR:  Installation failed with error 1601. GetLastError = :0
    03-19-2013,18:17:48 : Setup is already running.  Unable to initialize another instance of setup.
    03-19-2013,18:17:51 : Error initializing shared data
    03-19-2013,18:53:53 : m_bUseNativeClient = 1
    03-19-2013,18:53:53 : Executing SQL_GetServicePack.
    03-19-2013,18:53:53 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:53:54 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : Executing SQL_GetServicePack.
    03-19-2013,18:53:54 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:53:54 : Connected to SQL Server.
    03-19-2013,18:53:54 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:53:54 : m_bUseNativeClient = 1
    Symantec Backup Exec (TM) 13 Installation Log
    03-19-2013,18:58:06 : Windows Operating System Version: 6.1
    03-19-2013,18:58:06 : GetProductInfo returned success.  Checking for CORE OS values.
    03-19-2013,18:58:08 : Executing managed _Setup:
    03-19-2013,18:58:08 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\_Setup.exe
    03-19-2013,18:58:09 : Loading XML from:
    03-19-2013,18:58:09 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\BEx64\Install\IFProducts.xml
    03-19-2013,18:58:09 : RawsDlgSequence::CheckInstMode
    03-19-2013,18:58:09 : BEOperations::BE_GetInstalledProdCodeVersion()
    03-19-2013,18:58:09 : Launching UI Install
    03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:58:10 : m_bUseNativeClient = 1
    03-19-2013,18:58:10 : MDAC 6.1.7601.17514 is installed on this system.
    03-19-2013,18:58:10 : BeSeqDlgs::DlgBERemoteConfig
    03-19-2013,18:58:10 : CopySupportFiles
    03-19-2013,18:58:10 : Saved support files to C:\ProgramData\Symantec\Backup Exec\Logs\InstallSummary
    03-19-2013,18:58:11 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:58:11 : Executing BE_SetSQLxLangVersion.  Setting language version of SQL Express BKUPEXEC instance.
    03-19-2013,18:58:11 : BKUPEXEC SQLx setup file is SQLEXPR.EXE.
    03-19-2013,18:58:15 : Typical install value is set to : True
    03-19-2013,18:58:16 : m_bUseNativeClient = 1
    03-19-2013,18:58:16 : Executing SQL_GetServicePack.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:58:16 : Executing SQL_GetSQLServerEdition.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : Executing SQL_GetServicePack.
    03-19-2013,18:58:16 : DRIVER={SQL Native Client};SERVER=ACCENTPRESSDC\BKUPEXEC;Trusted_Connection=Yes
    03-19-2013,18:58:16 : Connected to SQL Server.
    03-19-2013,18:58:16 : ACCENTPRESSDC\BKUPEXEC is a SQL Server Product Level: 'SP4'
    03-19-2013,18:58:16 : m_bUseNativeClient = 1
    03-19-2013,18:58:49 : m_bUseNativeClient = 1
    03-19-2013,18:58:49 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,18:59:43 : Currently executing as ACCENTPRESS\administrator
    03-19-2013,18:59:43 : Install is not executing as the service account.
    03-19-2013,18:59:43 : Successfully Logged on as service account.
    03-19-2013,18:59:44 : Successfully impersonated service account.
    03-19-2013,18:59:44 : EUserName value successfully written to the registry.
    03-19-2013,18:59:44 : EPassword value successfully written to the registry.
    03-19-2013,18:59:44 : EDomain value successfully written to the registry.
    03-19-2013,18:59:46 : There were no remote computers selected for install
    03-19-2013,18:59:46 : m_bUseNativeClient = 1
    03-19-2013,18:59:46 : To back up Microsoft Exchange Server 2007, you must install the Exchange Management Tools for Microsoft Exchange Server 2007 on this computer.  The Management Tools can be installed during a custom
    install of Microsoft Exchange Server 2007.  To support individual mailbox message and folder restores from Information Store backups, you must also download and install the Microsoft Exchange Server MAPI Client and Collaboration Data Objects package version
    06.05.7888 or later on the Exchange 2007 server.  This package can be found on the Microsoft Web site.
    03-19-2013,18:59:47 : Terminal Services enabled.
    03-19-2013,18:59:47 : Terminal Services server has been set to Install mode.
    03-19-2013,18:59:47 : Checking for .Net Framework 3.5 SP1.
    03-19-2013,18:59:49 : Executing InstallLiveUpdate.
    03-19-2013,19:00:01 : The return value for Symantec LiveUpdate returned error code: 0
    03-19-2013,19:00:01 : Installing Microsoft Report Viewer Redistributable 2005
    03-19-2013,19:00:01 : The return value for Microsoft Report Viewer Redistributable 2005 returned error code: 0
    03-19-2013,19:00:01 : ==================Installing MS VC 8.0 SP1 runtimes.==================
    03-19-2013,19:00:01 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,19:00:01 : Extracting runtime installer package vcredist_x64.exe to BE support folder.
    03-19-2013,19:00:01 : D:\Software\Symantec Backup Exec 2010 32-64bit\BE\WINNT\INSTALL\VCRedist\vcredist_x64.exe /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,19:00:02 : Extracting runtime installer package VCREDI~2.EXE to BE support folder.
    03-19-2013,19:00:02 : "C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\VCREDI~2.EXE" /q:a /C /T:"C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist"
    03-19-2013,19:00:02 : Starting Install
    03-19-2013,19:00:02 : Using Command Line: REBOOT=ReallySuppress
    03-19-2013,19:00:02 : Support directory: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\
    03-19-2013,19:00:02 : Launching MSI: C:\Users\ADMINI~1\AppData\Local\Temp\2\{DD8FD4D3-F0FB-4FB2-8A34-25E2C7756A51}\VCRedist\vcredist.msi
    03-19-2013,19:00:03 : Discovered Total Actions: 115
    03-19-2013,19:00:03 : The return code from the MSI is: 1601
    03-19-2013,19:00:03 : Cleaning up the symc status key
    03-19-2013,19:00:03 : The return value for Microsoft Visual C++ 2005 SP1 Redistributable returned error code: 1601
    03-19-2013,19:00:03 : Clean up Symantec installer keys.
    03-19-2013,19:00:05 : Terminal Services enabled.
    03-19-2013,19:00:05 : Terminal Services server has been set to Execute mode.
    03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,19:00:07 : BeSeqDlgs::DlgInstallComplete
    03-19-2013,19:00:07 : AgentSeqDlgs::Misc_BE_CommonOps
    03-19-2013,19:00:07 : Skipping push of remote servers and agents due to failed local install.
    03-19-2013,19:00:10 : Gathering Telemetry items
    03-19-2013,19:00:10 : Failed to start the management service
    03-19-2013,19:00:10 : Service BackupExecManagementService was not found on computer '.'.
    03-19-2013,19:00:10 : Sending Telemetry to Symantec
    03-19-2013,19:00:10 : Transmit Telemetry initialized.
    03-19-2013,19:00:10 : TelemetryRegistryHelpers initialized.
    03-19-2013,19:00:10 : TransmitTelemetry.TransmitMessage URL=http://statsbe.hro.rnd.veritas.com/betelemetry/stats.php, Caught WebException The remote name could not be resolved: 'statsbe.hro.rnd.veritas.com'
    03-19-2013,19:00:10 : Telemetry data was successfully sent to Symantec
    03-19-2013,19:00:10 : The return code is: 1601
    03-19-2013,19:00:11 : ERROR:  Installation failed with error 1601. GetLastError = :0 
    DJH

  • Another Adobe Air installation issue

    I've tried removing the following directories and still get an error while installing.
    C:\Program Files\Common Files\Adobe AIR
         C:\Users\Default\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com
         C:\Users\phil\AppData\Roaming\Macromedia\Flash Player\www.macromedia.com
         C:\Users\phil\AppData\Local\Adobe\AIR
         C:\Users\phil\AppData\Roaming\Adobe\AIR
         C:\ProgramData\Adobe\AIR
    Yes, I ran it as administrator but not the default admin account. Phil's account has administrative privileges.
    [2011-09-20:18:00:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-20:18:00:52] Commandline is: -x1 file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
    [2011-09-20:18:00:52] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
    [2011-09-20:18:00:52] Invoking Application Installer for combined install
    [2011-09-20:18:00:52] Launching subprocess with commandline C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -withRuntime -url file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
    [2011-09-20:18:00:52] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-20:18:00:52] Commandline is: -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -withRuntime -url file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
    [2011-09-20:18:00:52] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
    [2011-09-20:18:00:53] Unpackaging file:///C:/Users/phil/Downloads/LIFR-1.1.0.air to C:\Users\phil\AppData\Local\Temp\fla41C0.tmp
    [2011-09-20:18:00:55] Application signature verified
    [2011-09-20:18:00:55] Unpackaging/validation complete
    [2011-09-20:18:00:55] No app located for appID 'com.amz.retirementplanner' and pubID ''
    [2011-09-20:18:01:10] Converting unpackaged application to a native installation package in C:\Users\phil\AppData\Local\Temp\fla841F.tmp
    [2011-09-20:18:01:11] Native installation package creation succeeded
    [2011-09-20:18:01:11] Launching subprocess with commandline C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\Adobe AIR\Versions\1.0\Adobe AIR Application Installer -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
    [2011-09-20:18:01:11] Relaunching with elevation
    [2011-09-20:18:01:14] Application Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-20:18:01:14] Commandline is: -stdio \\.\pipe\AIR_3948_0 -runtime C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp -silent -logToStdout -withRuntime -url -location "C:\Program Files (x86)" -desktopShortcut -programMenu file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
    [2011-09-20:18:01:14] Installed runtime (1.5.0.7220) located at c:\Program Files (x86)\Common Files\Adobe AIR
    [2011-09-20:18:01:15] Unpackaging file:///C:/Users/phil/Downloads/LIFR-1.1.0.air to C:\Users\phil\AppData\Local\Temp\fla98F4.tmp
    [2011-09-20:18:01:17] Application signature verified
    [2011-09-20:18:01:17] Unpackaging/validation complete
    [2011-09-20:18:01:17] No app located for appID 'com.amz.retirementplanner' and pubID ''
    [2011-09-20:18:01:17] Converting unpackaged application to a native installation package in C:\Users\phil\AppData\Local\Temp\flaA064.tmp
    [2011-09-20:18:01:18] Native installation package creation succeeded
    [2011-09-20:18:01:18] Starting silent combined runtime update and app install.
    Updating runtime from version 1.5.0.7220 to version 2.7.1.19610.
    Installing app com.amz.retirementplanner version 1.1.0 to C:\Program Files (x86)  using the source file at file:///C:/Users/phil/Downloads/LIFR-1.1.0.air
    [2011-09-20:18:01:19] Installing msi at C:\Users\phil\AppData\Local\Temp\AIR30EF.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-20:18:01:24] Installing msi at C:\Users\phil\AppData\Local\Temp\flaA064.tmp\setup.msi with guid {05E8C32F-06A7-1EF5-81B0-485BEAFD69AB}
    [2011-09-20:18:01:28] Application Installer end with exit code 0
    [2011-09-20:18:01:28] Elevated install completed
    [2011-09-20:18:01:28] Launching subprocess with commandline C:\Program Files (x86)\LIFR Retirement Planner 1.1\LIFR Retirement Planner 1.1.exe
    [2011-09-20:18:01:29] Application Installer end with exit code 0
    [2011-09-20:18:01:29] Subprocess app installer succeeded
    [2011-09-20:18:01:29] Runtime Installer end with exit code 0
    [2011-09-20:18:05:59] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-20:18:05:59] Commandline is:
    [2011-09-20:18:05:59] No installed runtime detected
    [2011-09-20:18:06:03] Relaunching with elevation
    [2011-09-20:18:06:03] Launching subprocess with commandline c:\users\phil\appdata\local\temp\aire262.tmp\adobe air installer.exe -ei
    [2011-09-20:18:06:07] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-20:18:06:07] Commandline is: -stdio \\.\pipe\AIR_3744_0 -ei
    [2011-09-20:18:06:07] No installed runtime detected
    [2011-09-20:18:06:07] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-20:18:06:07] Installing msi at c:\users\phil\appdata\local\temp\aire262.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-20:18:06:07] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-20:18:06:07] Rolling back install of c:\users\phil\appdata\local\temp\aire262.tmp\setup.msi
    [2011-09-20:18:06:07] Rollback complete
    [2011-09-20:18:06:07] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-20:18:06:07] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-20:18:06:07] Runtime Installer end with exit code 7
    [2011-09-20:18:06:11] Runtime Installer end with exit code 7
    [2011-09-20:18:06:30] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
    [2011-09-20:18:06:30] Commandline is:
    [2011-09-20:18:06:30] No installed runtime detected
    [2011-09-20:18:06:34] Relaunching with elevation
    [2011-09-20:18:06:34] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5b97.tmp\adobe air installer.exe -ei
    [2011-09-20:18:06:37] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-20:18:06:37] Commandline is: -stdio \\.\pipe\AIR_1032_0 -ei
    [2011-09-20:18:06:37] No installed runtime detected
    [2011-09-20:18:06:37] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-20:18:06:37] Installing msi at c:\users\phil\appdata\local\temp\air5b97.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-20:18:06:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-20:18:06:37] Rolling back install of c:\users\phil\appdata\local\temp\air5b97.tmp\setup.msi
    [2011-09-20:18:06:37] Rollback complete
    [2011-09-20:18:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-20:18:06:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-20:18:06:37] Runtime Installer end with exit code 7
    [2011-09-20:18:06:44] Runtime Installer end with exit code 7
    [2011-09-21:06:20:28] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:06:20:28] Commandline is:
    [2011-09-21:06:20:28] No installed runtime detected
    [2011-09-21:06:20:32] Relaunching with elevation
    [2011-09-21:06:20:32] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air4ee8.tmp\adobe air installer.exe -ei
    [2011-09-21:06:20:36] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:06:20:36] Commandline is: -stdio \\.\pipe\AIR_5268_0 -ei
    [2011-09-21:06:20:36] No installed runtime detected
    [2011-09-21:06:20:36] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:06:20:36] Installing msi at c:\users\phil\appdata\local\temp\air4ee8.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:06:20:37] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:20:37] Rolling back install of c:\users\phil\appdata\local\temp\air4ee8.tmp\setup.msi
    [2011-09-21:06:20:37] Rollback complete
    [2011-09-21:06:20:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:20:37] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:20:37] Runtime Installer end with exit code 7
    [2011-09-21:06:20:45] Runtime Installer end with exit code 7
    [2011-09-21:06:39:03] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:06:39:03] Commandline is:
    [2011-09-21:06:39:03] No installed runtime detected
    [2011-09-21:06:39:23] Relaunching with elevation
    [2011-09-21:06:39:23] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5445.tmp\adobe air installer.exe -ei
    [2011-09-21:06:39:29] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:06:39:29] Commandline is: -stdio \\.\pipe\AIR_7016_0 -ei
    [2011-09-21:06:39:29] No installed runtime detected
    [2011-09-21:06:39:29] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:06:39:29] Installing msi at c:\users\phil\appdata\local\temp\air5445.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:06:39:30] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:39:30] Rolling back install of c:\users\phil\appdata\local\temp\air5445.tmp\setup.msi
    [2011-09-21:06:39:30] Rollback complete
    [2011-09-21:06:39:30] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:39:30] Runtime Installer end with exit code 7
    [2011-09-21:06:39:40] Runtime Installer end with exit code 7
    [2011-09-21:06:41:16] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
    [2011-09-21:06:41:16] Commandline is:
    [2011-09-21:06:41:16] No installed runtime detected
    [2011-09-21:06:41:23] Relaunching with elevation
    [2011-09-21:06:41:23] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5f4d.tmp\adobe air installer.exe -ei
    [2011-09-21:06:41:32] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:06:41:32] Commandline is: -stdio \\.\pipe\AIR_5904_0 -ei
    [2011-09-21:06:41:32] No installed runtime detected
    [2011-09-21:06:41:32] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:06:41:32] Installing msi at c:\users\phil\appdata\local\temp\air5f4d.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:06:41:32] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:41:32] Rolling back install of c:\users\phil\appdata\local\temp\air5f4d.tmp\setup.msi
    [2011-09-21:06:41:32] Rollback complete
    [2011-09-21:06:41:32] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:41:32] Runtime Installer end with exit code 7
    [2011-09-21:06:41:41] Runtime Installer end with exit code 7
    [2011-09-21:06:46:44] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
    [2011-09-21:06:46:44] Commandline is:
    [2011-09-21:06:46:44] No installed runtime detected
    [2011-09-21:06:46:52] Relaunching with elevation
    [2011-09-21:06:46:52] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air5aca.tmp\adobe air installer.exe -ei
    [2011-09-21:06:46:56] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:06:46:56] Commandline is: -stdio \\.\pipe\AIR_6308_0 -ei
    [2011-09-21:06:46:56] No installed runtime detected
    [2011-09-21:06:46:56] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:06:46:56] Installing msi at c:\users\phil\appdata\local\temp\air5aca.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:06:46:56] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:46:56] Rolling back install of c:\users\phil\appdata\local\temp\air5aca.tmp\setup.msi
    [2011-09-21:06:46:56] Rollback complete
    [2011-09-21:06:46:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:46:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:46:58] Runtime Installer end with exit code 7
    [2011-09-21:06:54:29] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
    [2011-09-21:06:54:29] Commandline is:
    [2011-09-21:06:54:29] No installed runtime detected
    [2011-09-21:06:54:33] Relaunching with elevation
    [2011-09-21:06:54:33] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air7942.tmp\adobe air installer.exe -ei
    [2011-09-21:06:54:35] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:06:54:35] Commandline is: -stdio \\.\pipe\AIR_4300_0 -ei
    [2011-09-21:06:54:35] No installed runtime detected
    [2011-09-21:06:54:36] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:06:54:36] Installing msi at c:\users\phil\appdata\local\temp\air7942.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:06:54:36] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:54:36] Rolling back install of c:\users\phil\appdata\local\temp\air7942.tmp\setup.msi
    [2011-09-21:06:54:36] Rollback complete
    [2011-09-21:06:54:36] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:06:54:36] Runtime Installer end with exit code 7
    [2011-09-21:06:54:38] Runtime Installer end with exit code 7
    [2011-09-21:08:29:22] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
    [2011-09-21:08:29:22] Commandline is:
    [2011-09-21:08:29:22] No installed runtime detected
    [2011-09-21:08:29:25] Relaunching with elevation
    [2011-09-21:08:29:25] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air556f.tmp\adobe air installer.exe -ei
    [2011-09-21:08:29:29] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:29:29] Commandline is: -stdio \\.\pipe\AIR_7108_0 -ei
    [2011-09-21:08:29:29] No installed runtime detected
    [2011-09-21:08:29:29] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:29:29] Installing msi at c:\users\phil\appdata\local\temp\air556f.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:29:29] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:29:29] Rolling back install of c:\users\phil\appdata\local\temp\air556f.tmp\setup.msi
    [2011-09-21:08:29:29] Rollback complete
    [2011-09-21:08:29:29] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:29:29] Runtime Installer end with exit code 7
    [2011-09-21:08:34:00] Runtime Installer end with exit code 7
    [2011-09-21:08:36:08] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:36:08] Commandline is:
    [2011-09-21:08:36:08] No installed runtime detected
    [2011-09-21:08:36:11] Relaunching with elevation
    [2011-09-21:08:36:11] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air7bf3.tmp\adobe air installer.exe -ei
    [2011-09-21:08:36:13] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:36:13] Commandline is: -stdio \\.\pipe\AIR_6760_0 -ei
    [2011-09-21:08:36:13] No installed runtime detected
    [2011-09-21:08:36:13] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:36:13] Installing msi at c:\users\phil\appdata\local\temp\air7bf3.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:36:13] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:36:13] Rolling back install of c:\users\phil\appdata\local\temp\air7bf3.tmp\setup.msi
    [2011-09-21:08:36:13] Rollback complete
    [2011-09-21:08:36:13] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:36:13] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:36:13] Runtime Installer end with exit code 7
    [2011-09-21:08:36:15] Runtime Installer end with exit code 7
    [2011-09-21:08:36:45] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:36:45] Commandline is:
    [2011-09-21:08:36:45] No installed runtime detected
    [2011-09-21:08:36:49] Relaunching with elevation
    [2011-09-21:08:36:49] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air13de.tmp\adobe air installer.exe -ei
    [2011-09-21:08:36:52] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:36:52] Commandline is: -stdio \\.\pipe\AIR_4472_0 -ei
    [2011-09-21:08:36:52] No installed runtime detected
    [2011-09-21:08:36:52] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:36:52] Installing msi at c:\users\phil\appdata\local\temp\air13de.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:36:52] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:36:52] Rolling back install of c:\users\phil\appdata\local\temp\air13de.tmp\setup.msi
    [2011-09-21:08:36:52] Rollback complete
    [2011-09-21:08:36:52] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:36:52] Runtime Installer end with exit code 7
    [2011-09-21:08:36:52] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:37:03] Runtime Installer end with exit code 7
    [2011-09-21:08:37:53] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
    [2011-09-21:08:37:53] Commandline is:
    [2011-09-21:08:37:53] No installed runtime detected
    [2011-09-21:08:37:54] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
    [2011-09-21:08:37:54] Commandline is:
    [2011-09-21:08:37:54] No installed runtime detected
    [2011-09-21:08:37:55] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
    [2011-09-21:08:37:55] Commandline is:
    [2011-09-21:08:37:55] No installed runtime detected
    [2011-09-21:08:38:01] Relaunching with elevation
    [2011-09-21:08:38:01] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air18cd.tmp\adobe air installer.exe -ei
    [2011-09-21:08:38:11] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:38:11] Commandline is: -stdio \\.\pipe\AIR_3020_0 -ei
    [2011-09-21:08:38:11] No installed runtime detected
    [2011-09-21:08:38:11] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:38:11] Installing msi at c:\users\phil\appdata\local\temp\air18cd.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:38:11] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:38:11] Rolling back install of c:\users\phil\appdata\local\temp\air18cd.tmp\setup.msi
    [2011-09-21:08:38:11] Rollback complete
    [2011-09-21:08:38:11] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:38:11] Runtime Installer end with exit code 7
    [2011-09-21:08:38:13] Runtime Installer end with exit code 7
    [2011-09-21:08:38:20] Relaunching with elevation
    [2011-09-21:08:38:20] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air2903.tmp\adobe air installer.exe -ei
    [2011-09-21:08:38:22] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:38:22] Commandline is: -stdio \\.\pipe\AIR_6784_0 -ei
    [2011-09-21:08:38:22] No installed runtime detected
    [2011-09-21:08:38:22] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:38:22] Installing msi at c:\users\phil\appdata\local\temp\air2903.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:38:22] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:38:22] Rolling back install of c:\users\phil\appdata\local\temp\air2903.tmp\setup.msi
    [2011-09-21:08:38:22] Rollback complete
    [2011-09-21:08:38:22] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:38:22] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:38:22] Runtime Installer end with exit code 7
    [2011-09-21:08:38:23] Runtime Installer end with exit code 7
    [2011-09-21:08:38:25] Relaunching with elevation
    [2011-09-21:08:38:25] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air1b7c.tmp\adobe air installer.exe -ei
    [2011-09-21:08:38:27] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:38:27] Commandline is: -stdio \\.\pipe\AIR_4472_0 -ei
    [2011-09-21:08:38:27] No installed runtime detected
    [2011-09-21:08:38:27] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:38:27] Installing msi at c:\users\phil\appdata\local\temp\air1b7c.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:38:27] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:38:27] Rolling back install of c:\users\phil\appdata\local\temp\air1b7c.tmp\setup.msi
    [2011-09-21:08:38:27] Rollback complete
    [2011-09-21:08:38:27] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:38:27] Runtime Installer end with exit code 7
    [2011-09-21:08:38:38] Runtime Installer end with exit code 7
    [2011-09-21:08:38:58] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
    [2011-09-21:08:38:58] Commandline is:
    [2011-09-21:08:38:58] No installed runtime detected
    [2011-09-21:08:39:02] Relaunching with elevation
    [2011-09-21:08:39:02] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air22cc.tmp\adobe air installer.exe -ei
    [2011-09-21:08:39:04] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:39:04] Commandline is: -stdio \\.\pipe\AIR_7868_0 -ei
    [2011-09-21:08:39:04] No installed runtime detected
    [2011-09-21:08:39:05] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:39:05] Installing msi at c:\users\phil\appdata\local\temp\air22cc.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:39:05] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:39:05] Rolling back install of c:\users\phil\appdata\local\temp\air22cc.tmp\setup.msi
    [2011-09-21:08:39:05] Rollback complete
    [2011-09-21:08:39:05] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:39:05] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:39:05] Runtime Installer end with exit code 7
    [2011-09-21:08:39:08] Runtime Installer end with exit code 7
    [2011-09-21:08:39:37] Runtime Installer begin with version 2.7.1.19610 on Windows Vista x86
    [2011-09-21:08:39:37] Commandline is:
    [2011-09-21:08:39:37] No installed runtime detected
    [2011-09-21:08:39:43] Relaunching with elevation
    [2011-09-21:08:39:43] Launching subprocess with commandline c:\users\phil\appdata\local\temp\airb885.tmp\adobe air installer.exe -ei
    [2011-09-21:08:39:46] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:39:46] Commandline is: -stdio \\.\pipe\AIR_6488_0 -ei
    [2011-09-21:08:39:46] No installed runtime detected
    [2011-09-21:08:39:46] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:39:46] Installing msi at c:\users\phil\appdata\local\temp\airb885.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:39:47] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:39:47] Rolling back install of c:\users\phil\appdata\local\temp\airb885.tmp\setup.msi
    [2011-09-21:08:39:47] Rollback complete
    [2011-09-21:08:39:47] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:39:47] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:39:47] Runtime Installer end with exit code 7
    [2011-09-21:08:42:54] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:42:54] Commandline is:
    [2011-09-21:08:42:54] No installed runtime detected
    [2011-09-21:08:42:58] Relaunching with elevation
    [2011-09-21:08:42:58] Launching subprocess with commandline c:\users\phil\appdata\local\temp\airba4a.tmp\adobe air installer.exe -ei
    [2011-09-21:08:43:01] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:43:01] Commandline is: -stdio \\.\pipe\AIR_7176_0 -ei
    [2011-09-21:08:43:01] No installed runtime detected
    [2011-09-21:08:43:01] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:43:01] Installing msi at c:\users\phil\appdata\local\temp\airba4a.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:43:01] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:43:01] Rolling back install of c:\users\phil\appdata\local\temp\airba4a.tmp\setup.msi
    [2011-09-21:08:43:01] Rollback complete
    [2011-09-21:08:43:01] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:43:02] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:43:02] Runtime Installer end with exit code 7
    [2011-09-21:08:43:03] Runtime Installer end with exit code 7
    [2011-09-21:08:43:09] Runtime Installer end with exit code 7
    [2011-09-21:08:48:47] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:48:47] Commandline is:
    [2011-09-21:08:48:47] No installed runtime detected
    [2011-09-21:08:48:55] Relaunching with elevation
    [2011-09-21:08:48:55] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air1b9b.tmp\adobe air installer.exe -ei
    [2011-09-21:08:48:55] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:48:55] Commandline is: -stdio \\.\pipe\AIR_5568_0 -ei
    [2011-09-21:08:48:55] No installed runtime detected
    [2011-09-21:08:48:56] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:48:56] Installing msi at c:\users\phil\appdata\local\temp\air1b9b.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:48:56] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:48:56] Rolling back install of c:\users\phil\appdata\local\temp\air1b9b.tmp\setup.msi
    [2011-09-21:08:48:56] Rollback complete
    [2011-09-21:08:48:56] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:48:56] Runtime Installer end with exit code 7
    [2011-09-21:08:49:26] Runtime Installer end with exit code 7
    [2011-09-21:08:56:37] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:56:37] Commandline is:
    [2011-09-21:08:56:37] No installed runtime detected
    [2011-09-21:08:59:53] Relaunching with elevation
    [2011-09-21:08:59:53] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air41b1.tmp\adobe air installer.exe -ei
    [2011-09-21:08:59:53] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:08:59:53] Commandline is: -stdio \\.\pipe\AIR_5656_0 -ei
    [2011-09-21:08:59:53] No installed runtime detected
    [2011-09-21:08:59:53] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:08:59:53] Installing msi at c:\users\phil\appdata\local\temp\air41b1.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:08:59:53] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:59:53] Rolling back install of c:\users\phil\appdata\local\temp\air41b1.tmp\setup.msi
    [2011-09-21:08:59:53] Rollback complete
    [2011-09-21:08:59:53] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:59:53] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:08:59:53] Runtime Installer end with exit code 7
    [2011-09-21:09:07:06] Runtime Installer end with exit code 7
    [2011-09-21:09:07:39] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:09:07:39] Commandline is:
    [2011-09-21:09:07:39] No installed runtime detected
    [2011-09-21:09:07:44] Relaunching with elevation
    [2011-09-21:09:07:44] Launching subprocess with commandline c:\users\phil\appdata\local\temp\air62c8.tmp\adobe air installer.exe -ei
    [2011-09-21:09:07:44] Runtime Installer begin with version 2.7.1.19610 on Windows 7 x86
    [2011-09-21:09:07:44] Commandline is: -stdio \\.\pipe\AIR_7504_0 -ei
    [2011-09-21:09:07:44] No installed runtime detected
    [2011-09-21:09:07:44] Starting silent runtime install. Installing runtime version 2.7.1.19610
    [2011-09-21:09:07:44] Installing msi at c:\users\phil\appdata\local\temp\air62c8.tmp\setup.msi with guid {FDB3B167-F4FA-461D-976F-286304A57B2A}
    [2011-09-21:09:07:44] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:09:07:44] Rolling back install of c:\users\phil\appdata\local\temp\air62c8.tmp\setup.msi
    [2011-09-21:09:07:44] Rollback complete
    [2011-09-21:09:07:44] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
    [2011-09-21:09:07:44] Runtime Installer end with exit code 7
    [2011-09-21:09:07:59] Runtime Installer end with exit code 7

    I'm sorry you're running into installation issues with AIR.  Microsoft has just released a new utility that can help resolve installation problems.  Would you mind giving this a try and let us know how it works for you?  When running the Fix it, go through the uninstall process and try to remove Adobe AIR from your system.  Once finished, download the latest version of AIR and install again.
    Microsoft Install and Uninstall Fix It
    If you still encounter problems, I created a vb script called AIR zapper that might also help.  You can find it on this post: http://forums.adobe.com/message/3737276#3737276
    Thanks,
    Chris

  • Air runtime bundled with exe installation issue

    Hello,
    I am sorry if my question is not relevent but i am facing an installation issue with air bundlled with my exe app.
    I have created my air app as  myApp.exe  with flash cs5.5.Air 2.6 has been embeded with the package.If i try to install the package on a system without having internet connection, its asking "Air runtime not found, please download or contact app provider".if net connected,then it will install fine.Actually my app requires no internet acces and purely its an offline desktop app.
    Actually is there any background checking / updation is going with the bundled air ?
    i have stucked in between this.any help would be appreciated.
    thanks,
    Arunraj

    Is this problem with the installer, or your application at first launch?  Would it be possible to send this to me at [email protected] so I can give it a try?
    Thanks,
    Chris

  • R12.1 Installation Issue in RHEL-5

    R12 Installation Issue in RHEL-5
    =======================
    I have downloaded R12.1(RAPID INSTALL START,RDBMS SOFTWARE,R12 DATABASE,RAPID INSTALL TOOLS,APPL_TOP) and unziped all the zip files. I started with /u01/startCD/Disk1/rapidwiz/. rapidwiz and everything went smoothly upto "Rapid Install Wizard Alert" and then got a message as given below.I am in the middle of R12.1 installation (on RHEL-5) and got a strange message.System Check Status was OK.
    Select the root directory of the required Rapid Install Disk
    Enter the location for the disk labled:
    Oracle A[pplications Rapid Install - RDBMS Disk 1
    After putting the RDBMS Disk 1 Path (correct location) , the installation process won't start.
    I have installed Oracle Application Server 10g(MID,INFRA), Oracle Database-10g on this server without any issues.
    Any suggestion to fix it up...........                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi user
    Select the root directory of the required Rapid Install Disk
    Enter the location for the disk labled:
    Oracle A[pplications Rapid Install - RDBMS Disk 1
    After putting the RDBMS Disk 1 Path (correct location) , the installation process won't start.
    Did you checked log file for more details?RegardHelios                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Installation Issues with Win XP

    Hi, how are all of you? I am having installation issues with
    Windows XP. Every time I double click the Adobe Air installer, it
    says, "Installer encounters an error and need to be close"
    I have tried on three different PC. All giving same error. I
    downloaded the installer many time from adobe site but nothing
    works.
    Windows XP SP2
    512MB RAM
    Pentium IV 2.4 GHz Processor
    Any suggestion or help will be greatly appreciated.
    Thanks,
    .:.WAHAB

    Hello Tzeng, thank you for your reply. I could not get to the
    log file you mentioned in your reply but here is file generated
    when I get the error:
    FILE LOCATION
    F:\DOCUME~1\DUR-E-~1\LOCALS~1\Temp\c022_appcompat.txt
    <?xml version="1.0" encoding="UTF-16"?>
    <DATABASE>
    <EXE NAME="Adobe AIR Installer.exe"
    FILTER="GRABMI_FILTER_PRIVACY">
    <MATCHING_FILE NAME="Adobe AIR Installer.exe"
    SIZE="42304" CHECKSUM="0xAC3BF086" BIN_FILE_VERSION="1.5.1.8210"
    BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
    FILE_DESCRIPTION="Adobe AIR Installer" COMPANY_NAME="Adobe Systems
    Inc." PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
    ORIGINAL_FILENAME="setup.exe" INTERNAL_NAME="setup.exe"
    LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
    VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
    VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x13891"
    LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
    UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
    19:35:52" UPTO_LINK_DATE="02/12/2009 19:35:52" />
    <MATCHING_FILE NAME="AdobeAIRInstaller.exe"
    SIZE="15739760" CHECKSUM="0xA9D06949" BIN_FILE_VERSION="1.5.1.8210"
    BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
    FILE_DESCRIPTION="Adobe AIR Installer" COMPANY_NAME="Adobe Systems
    Inc." PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
    ORIGINAL_FILENAME="Adobe AIR Installer.exe" INTERNAL_NAME="Adobe
    AIR Installer.exe" LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems
    Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
    VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0xF1128F"
    LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
    UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
    19:35:39" UPTO_LINK_DATE="02/12/2009 19:35:39" />
    <MATCHING_FILE NAME="flashplayer_9_plugin_debug.exe"
    SIZE="1786846" CHECKSUM="0x2FE8A8E1" BIN_FILE_VERSION="9.0.159.0"
    BIN_PRODUCT_VERSION="9.0.159.0" PRODUCT_VERSION="9.0.159.0"
    FILE_DESCRIPTION="Adobe® Flash® Player Plugin Installer"
    COMPANY_NAME="Adobe Systems Incorporated" PRODUCT_NAME="Adobe®
    Flash® Player Plugin" FILE_VERSION="1.0.20"
    LEGAL_COPYRIGHT="Copyright © 1996-2009 Adobe Systems
    Incorporated and its licensors. All Rights Reserved."
    VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4"
    VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x18FD8B"
    LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="9.0.159.0"
    UPTO_BIN_PRODUCT_VERSION="9.0.159.0" LINK_DATE="01/13/2007
    18:28:10" UPTO_LINK_DATE="01/13/2007 18:28:10"
    VER_LANGUAGE="English (United States) [0x409]" />
    <MATCHING_FILE NAME="setup.msi" SIZE="30720"
    CHECKSUM="0xF9521F1C" />
    <MATCHING_FILE NAME="Adobe AIR\Versions\1.0\Adobe AIR
    Application Installer.exe" SIZE="67392" CHECKSUM="0x78783101"
    BIN_FILE_VERSION="1.5.1.8210" BIN_PRODUCT_VERSION="1.5.1.8210"
    PRODUCT_VERSION="1.5.1" FILE_DESCRIPTION="Adobe AIR Application
    Installer" COMPANY_NAME="Adobe Systems Inc." PRODUCT_NAME="Adobe
    AIR 1.5.1" FILE_VERSION="1.5.1.8210" ORIGINAL_FILENAME="Adobe AIR
    Application Installer.exe" INTERNAL_NAME="Adobe AIR Application
    Installer.exe" LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
    VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
    VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x145F9"
    LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
    UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
    19:34:43" UPTO_LINK_DATE="02/12/2009 19:34:43" />
    <MATCHING_FILE NAME="Adobe AIR\Versions\1.0\Adobe
    AIR.dll" SIZE="7876928" CHECKSUM="0x7F6C1C4D"
    BIN_FILE_VERSION="1.5.1.8210" BIN_PRODUCT_VERSION="1.5.1.8210"
    PRODUCT_VERSION="1.5.1" FILE_DESCRIPTION="Adobe AIR"
    COMPANY_NAME="Adobe Systems Inc." PRODUCT_NAME="Adobe AIR 1.5.1"
    FILE_VERSION="1.5.1.8210" ORIGINAL_FILENAME="Adobe AIR.dll"
    INTERNAL_NAME="Adobe AIR.dll" LEGAL_COPYRIGHT="Copyright 2009,
    Adobe Systems Inc." VERFILEDATEHI="0x0" VERFILEDATELO="0x0"
    VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32"
    PE_CHECKSUM="0x789021" LINKER_VERSION="0x0"
    UPTO_BIN_FILE_VERSION="1.5.1.8210"
    UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
    19:33:38" UPTO_LINK_DATE="02/12/2009 19:33:38" />
    <MATCHING_FILE NAME="Adobe CS3\Flash Professional\Adobe
    CS3\Setup.exe" SIZE="2685104" CHECKSUM="0x7309F0C8"
    BIN_FILE_VERSION="1.0.135.0" BIN_PRODUCT_VERSION="1.0.135.0"
    PRODUCT_VERSION="1,0,135,0" FILE_DESCRIPTION="Adobe Setup"
    COMPANY_NAME="Adobe Systems, Copyright 2005-2007"
    PRODUCT_NAME="Adobe Setup" FILE_VERSION="1,0,135,0"
    ORIGINAL_FILENAME="Setup.exe" INTERNAL_NAME="Setup.exe"
    LEGAL_COPYRIGHT="Adobe Systems, Copyright 2005-2007. All rights
    reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4"
    VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x298CDB"
    LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.0.135.0"
    UPTO_BIN_PRODUCT_VERSION="1.0.135.0" LINK_DATE="03/16/2007
    23:30:15" UPTO_LINK_DATE="03/16/2007 23:30:15"
    VER_LANGUAGE="English (United States) [0x409]" />
    <MATCHING_FILE NAME="Adobe CS3\Flash Professional\Adobe
    CS3\WinBootstrapper.msi" SIZE="1823744" CHECKSUM="0x88506662" />
    </EXE>
    <EXE NAME="Adobe AIR.dll"
    FILTER="GRABMI_FILTER_THISFILEONLY">
    <MATCHING_FILE NAME="Adobe AIR.dll" SIZE="7876928"
    CHECKSUM="0x7F6C1C4D" BIN_FILE_VERSION="1.5.1.8210"
    BIN_PRODUCT_VERSION="1.5.1.8210" PRODUCT_VERSION="1.5.1"
    FILE_DESCRIPTION="Adobe AIR" COMPANY_NAME="Adobe Systems Inc."
    PRODUCT_NAME="Adobe AIR 1.5.1" FILE_VERSION="1.5.1.8210"
    ORIGINAL_FILENAME="Adobe AIR.dll" INTERNAL_NAME="Adobe AIR.dll"
    LEGAL_COPYRIGHT="Copyright 2009, Adobe Systems Inc."
    VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004"
    VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x789021"
    LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.5.1.8210"
    UPTO_BIN_PRODUCT_VERSION="1.5.1.8210" LINK_DATE="02/12/2009
    19:33:38" UPTO_LINK_DATE="02/12/2009 19:33:38" />
    </EXE>
    <EXE NAME="kernel32.dll"
    FILTER="GRABMI_FILTER_THISFILEONLY">
    <MATCHING_FILE NAME="kernel32.dll" SIZE="983552"
    CHECKSUM="0x4CE79457" BIN_FILE_VERSION="5.1.2600.2180"
    BIN_PRODUCT_VERSION="5.1.2600.2180" PRODUCT_VERSION="5.1.2600.2180"
    FILE_DESCRIPTION="Windows NT BASE API Client DLL"
    COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft®
    Windows® Operating System" FILE_VERSION="5.1.2600.2180
    (xpsp_sp2_rtm.040803-2158)" ORIGINAL_FILENAME="kernel32"
    INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft
    Corporation. All rights reserved." VERFILEDATEHI="0x0"
    VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2"
    MODULE_TYPE="WIN32" PE_CHECKSUM="0xFF848" LINKER_VERSION="0x50001"
    UPTO_BIN_FILE_VERSION="5.1.2600.2180"
    UPTO_BIN_PRODUCT_VERSION="5.1.2600.2180" LINK_DATE="08/04/2004
    07:56:36" UPTO_LINK_DATE="08/04/2004 07:56:36"
    VER_LANGUAGE="English (United States) [0x409]" />
    </EXE>
    </DATABASE>
    Seems like an XML doc.
    I tried by extracting all the file with WinRAR but nothing
    worked
    Please let me know if you need more information.
    Thanks
    .:.WAHAB

Maybe you are looking for

  • Safari and iTunes store crashing after 10.8.4 update

    Hi, Since I have updated to the 10.8.4 OS on my 27inch Late 2012 iMac (3.4 GHz Intel Core i7) I am having trouble with applications which crash instantly upon opening them. I have tried opening these applications about 30-40 times and sent the report

  • Imported IE bookmarks missing on restart. No IE bar on Bookmarks menu.

    Imported bookmarks to 3.6.9 from EI7 (WinXP). They were there, after restarting computer they are gone. There is no Internet Explorer bar in the Bookmarks drop down. How do I get them back?

  • Query BI7: problem in using the variables of referenced caracteristics.

    Dear Experts, I have posted a question in "BI General" yesterday. Untill now, I haven't got any reply. So i decide to post it under this subject. And I hope somebody can help me. A query was created on the basis of an Infoset, in which there are many

  • Iweb on the new mac air ??

    Hi all, I'm going to buy the new mac AIR , but I knew that the application IWEB doesnt come with the new OSx LION. Do you know if IWEB is available on the apple store and how much does it cost ? Do you know if OSx LION will support IWEB? Thanks a lot

  • Import folder problem

    when i try to import a folder the "import folder" is not activated in explorer.  when i drag and drop the folder  i get "file failure" error message "file format not supported".  however the folder and all files were imported correctly.