WWI SERVICE not starting

I am trying to connect a new ECC enviornment to an existing WWI GLM server which is already connected to our SAP Dev. server .I have created RFC Connection for the EH&S Management Service and WWI generation server. My RFC connection for EH&S
Management Service is OK. when i log in CGSADM in  new SAP  server i can see the WWI server .
Nextstep i create the WWI generation server. It create the service and i seethe entry added in SAPRFC.INI also but when i try to start the service i get the message
===============================================================
S:c$:137 Error: Unable to start service 'WWGLM**_SERV_S 01_01' due to
following reason. Error = The servic e did not respond to the start or
control request in a timely fashion. , Internal = StartService
Message no. c$137
================================================================
When i try to start from windows service i get this message
===========================================================
Couldnot start service. Error 1053 the service didnot respond.
===========================================================
Can any one provide some input what the issue .Why the new  service is not getting started.

Hey.
I am facing the same problem.
Did you get the solution?
If you get it please post it here.
Thanks n regards.
Mihir

Similar Messages

  • SAP Service Not Starting in BI 7.0

    Hi All,
    Today morning my BI 7.0 server restarted twice automatically, then I started the server in last known good configuration after that when I tried to start the server from SAP MMC it didn't started and when i checked the sap service in services.msc it gives error <b>"Some services stop automatically when they have no work to do"</b>.and didn't get started.
    I found a thread similiar to this problem and following that I used sapstartsrv.exe in usr\sap\SID\......\exe directory. This didn't worked for me and by using this Both the services SAPEP2_00 and SAPEP2_01 got removed from services.msc.
    Now I have installed these service again and now I am at same status as in morning,
    In Event log
    For SAPEP2_00 and SAPEP2_01 the following error are avaliable:
    --Initialization failed. Service not started. [ntservmain.cpp 1269]
    --Unable to change to Directory
    gms40\saploc\EP2\DVEBMGS00\work. (Error 53 ERROR_BAD_NETPATH: The network path was not found. ) [ntservstart.cpp 966]
    If any one have gone through such situation please help me out from this, Its has became too critical for me now.
    Thanks in advance....
    Regards
    Vinay Paul

    Hi
    Service are started now but when I am trying to start the server, it is showing strdbs.cmd, sapcpe.exe in red status "could not be started".
    Regards
    Vinay Paul
    Message was edited by:
            Vinay Paul

  • Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

    Hi Forum members,
    We have a client that has intermittent issues with RDS on a 2012 R2 server.
    As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
    DNS roles amongst others.
    The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
    The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
    Log Name:      System
    Source:        Service Control Manager
    Date:          21/01/2015 4:50:32 PM
    Event ID:      7024
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      intentionally removed.local
    Description:
    The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
    Event Xml:
    <Event xmlns="
      <System>
        <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
        <EventID Qualifiers="49152">7024</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
        <EventRecordID>53721</EventRecordID>
        <Correlation />
        <Execution ProcessID="568" ThreadID="12436" />
        <Channel>System</Channel>
        <Computer> intentionally removed.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="param1">Remote Desktop Management</Data>
        <Data Name="param2">%%2284126209</Data>
        <Binary>520044004D0053000000</Binary>
      </EventData>
    </Event>
    In addition in the "Application" event log, the following error is logged:
    Log Name:      Application
    Source:        MSSQL$MICROSOFT##WID
    Date:          21/01/2015 5:24:47 PM
    Event ID:      18456
    Task Category: Logon
    Level:         Information
    Keywords:      Classic,Audit Failure
    User:          NETWORK SERVICE
    Computer:      intentionally removed.local
    Description:
    Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
    Event Xml:
    <Event xmlns="
      <System>
        <Provider Name="MSSQL$MICROSOFT##WID" />
        <EventID Qualifiers="49152">18456</EventID>
        <Level>0</Level>
        <Task>4</Task>
        <Keywords>0x90000000000000</Keywords>
        <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
        <EventRecordID>4228336</EventRecordID>
        <Channel>Application</Channel>
        <Computer>intentionally removed.local</Computer>
        <Security UserID="S-1-5-20" />
      </System>
      <EventData>
        <Data>NT AUTHORITY\NETWORK SERVICE</Data>
        <Data> Reason: Could not find a login matching the name provided.</Data>
        <Data> [CLIENT: &lt;named pipe&gt;]</Data>
        <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
      </EventData>
    </Event>
    I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
    to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
    My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
    Regards,
    David West.

    Hi David,
    If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
    More information for you:
    Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
    http://support.microsoft.com/kb/2799605/de
    Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
    http://support.microsoft.com/kb/2833839
    If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Apple mobile device service not started

    Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
    I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
    I have the newest itunes and i have windows 7

    first I would check the event viewer for into about what goes wrong that cause the service to fail
    if this don't give a clear image about what the problem is
    then I would uninstall itunes and resinstall it
    if that didn't help I would ask questions about solve the problem in the itunes for windows forum  where people wise in the ways of itunes would be more likely to read your post
    https://discussions.apple.com/community/itunes/itunes_for_windows

  • Apple mobile device service not started please help

    Each time i try to sync my iphone to itunes it keeps on saying "apple mobile device service not started"
    I know how to start it and everything its that when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
    I have the newest itunes and i have windows 7

    when i start it it says "Windows could nt start the Aplle Mobile Device service on local computer"
    Does Windows give you an error code number when AMDS fails to start, Love? If so what number do you you get?

  • Oracle distributed document capture service not started

    Oracle distributed document capture service not started
    and timeout

    I did check the Distributed Document Capture Configuration (from the Start menu) and it also indicates that I have selected "Oracle Distributed Document Capture Prompted Login". Once I click "OK" after I supplied all the paths required by server settings, it also displays the error "The username and password could not be validated". What credentials should be entered in the User ID / Password / Domain fields? You should use the username and password entered while configuring the "capture" security model. Leave the domain field blank.
    I have not yet configured the IIS at this point. Is it required for the Capture application to authenticate the user I specified during the installation configuration at login? IIS will serve web ODDC interface and will be needed for authentication while accessing ODDC web pages. I beleive that it is not needed for authentication from ODC/ODDC applets. However, when something is not working as expected, I would first finish all required installation and especially post installation setup steps.
    I had a look at the IIS configuration in the installation document. It doesn't clearly state which document is the default document for the website one needs to create in IIS. Do you know what it should be? You have to add new web site, say like "Capture" and add virtual directory from assumed path like: C:\Program Files\Oracle\Document Capture\WebPages
    For the default document I have WebCapture.asp.
    The Oracle Distributed Document Capture service does no start on my PC. Is this required for me to atleast login to the Capture application? It's required only for processing the scanned batches.
    I hope that this will help.
    Boris
    Edited by: tombo on 2012.03.16 06:32

  • Critical Services Not Starting Automatically & Access to Server occasionally dropping out

    For the last few months we have been trying to resolve an issue where access to files on the server (SBS2011 - running domain services, exchange, etc) get so slow or just unresponsive. Logging onto the server is also not possible till it starts responding
    again.
    We also found that when the server starts, the Netlogon services does not start automatically event though it is set to auto start. There are a number of other services mainly exchange services that do not start as well but it seems this may be due to the
    net service not starting.
    We have re-installed the OS but this does not seem to have fixed the issue. The environment is a mix of the SBS2011 server, two Windows Server 2003 boxes - one running Terminal Services. The other was being used for SAP but no longer in use. The clients
    are mainly XP with a few Windows 7 machines. We are in the process of planning the replacement of the XP machines.

    You re-installed SBS2011? - that seems rather drastic.  Did you maintain your domain or just set it all up again?
    This sounds like a DNS issue but have a look at the event viewer and google/post the Event ID and Source.  Given those two you can start to track down the cause and possible fixes at www.eventid.net.  Just be aware that SBS2011 has a lot of
    "normal" event errors, see http://support.microsoft.com/kb/2483007
    You should also run the SBS best practice analyzer and maybe run the "Fix my network" wizard in the SBS console.  Also make sure SBS is the DHCP server for the network.
    -- Al

  • I have updated itunes but now phone and ipod will not connect to pc - message reads apple mobile device service not started

    i have updated itunes and cannot connect devices - apple mobile device service not started?

    Hello there, mikemason5.
    The following Knowledge Base article provides some great troubleshooting recommendations:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • EPMA server service not started

    Hi All,
    I installed Hyperion 11.1.2.2 Essbase, Planning, EPMA, Calculation Manager, FDM and HFM in the single machine in windows server 2008 R2.
    but i am facing two issues.
    1. In services, EPMA Server service not started.
    2. In FDM, I am getting error in connecting to Essbase.
    Error: Unable to retrieve target system data.
    Is any thing, i have to install additionally?
    Regards,
    mady

    Hi,
    In Windows Event Viewer i got this message.
    Log Name: System
    Source: Service Control Manager
    Date: 9/3/2012 12:46:12 AM
    Event ID: 7011
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: hyperionepm
    Description:
    A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Parallels Tools Service service.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7011</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2012-09-03T07:46:12.612304600Z" />
    <EventRecordID>70587</EventRecordID>
    <Correlation />
    <Execution ProcessID="440" ThreadID="16540" />
    <Channel>System</Channel>
    <Computer>hyperionepm</Computer>
    <Security />
    </System>
    <EventData>
    <Data Name="param1">30000</Data>
    <Data Name="param2">Parallels Tools Service</Data>
    </EventData>
    </Event>

  • Fix for Apple Mobile Device Services not starting

    Finally a fix for Apple Mobile Device Services not starting. Basically I got this from someone else in these forums and it worked. Go to C:\Documents and Settings\AllUsers\Application Data\Apple and delete any file in there that says Apple Mobile Device Services (I understand these are cached files...I had about 8 files to delete). Next go to your control panel, click on Add/Delete programs, find Apple Mobile Device Support and delete (remove) it. Once this is all done do not reboot, rather open itunes and go to Help menu /Check for Updates and update to the latest version. This will install the latest version of iTunes and also a new version of Apple Mobile Device Services. Next reboot and it should work for many of you...it did for me. Open iTunes and plug in your device...good luck. I wrote this from memory so if some of the phrases don't match exactly what you see I apologize. Also, this worked for me on a Windows XP computer.

    Thanks for posting this, my iTunes randomly started saying the Apple Mobile Device was stopped, and apple's solutions didn't help. I hope this one will, but what do I do if I have the latest iTunes, so it doesn't update? Wait till they come out with an update? It says I need to run the iTunes installer, but I can't find that. Please help, this is really annoying me...=(

  • Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started". I need help because i'm enable do download the new update. Thanks

    Hello, my iphone for several times shows me this message "this iphone can't be used because the Apple Mobile Device service not started".
    I need help, because i'm enable do download the new update.
    Thanks

    Type "Apple Mobile Device service" into the search bar at the top of this age by "Support" and read the resulting help articles.

  • When trying to sync my iPad to iTunes, I get the message that iPad cannot be used as the Apple Mobile Device Service not started.

    When trying to sync my iPad to iTunes, I get the message that iPad cannot be used because Apple Mobile Device Service not started.

    If you are on a PC then there are instructions here for starting it http://support.apple.com/kb/TS1567 . If you are on a Mac then see this page http://support.apple.com/kb/HT1747

  • I am unable to update to IOS5 from Itunes, says "mobile device services not started". What is this and how do I fix it?

    I am unable to update to IOS5 from Itunes, says "mobile device services not started". What is this and how do I fix it?

    Here is a YouTube video which should guide you through a solution:  http://www.youtube.com/watch?v=VLFAo-FWLxE

  • OracleHome92 agent service not started

    hai All,
    I renamed my windows 2003 server machine. After rebooting the server a message appears that oracle intellegent agent exectable encountered a problem and needed to close. After that I noticeed that The oracleHome92 agent service not started. I cannot able to start that service.some eror occurs.... need any extra change?
    Please help?
    Shiju

    You wrote: "Some error occurs"
    Let me rephrase that for you: "My car won't start tell me why."
    No one can help you if you don't post relevant information.
    My advice ... Stop doing things when you don't know the implications. That is why testing environments exist. Rename the server back to its original name and then learn what to do, and test it, before doing it again.

  • I try to sync but get message apple mobile device service not started?

    I try to sync but get message apple mobile device service not started now what?

    Here a link on how to restart AMDS on Windows
    http://support.apple.com/kb/TS1567

Maybe you are looking for

  • My apple id is not working for imessage...

    When I enter my apple id and password for imessage, an error occurs telling me it is wrong...but I have verified it and even went as far as changing the password. 

  • In MTO   scenario i want to have some materials with out account assignment

    Hi,     In MTO scenario i want to have some components in my BOM  to not to get planned with respect to sales order stock / account assignment of specifice sales order( say "C" class items). if i use Consumption based planning" VB" for those material

  • HT1414 i need a passcode? for my ipod?

    Does anyone know the passcode for resting the ipod touch?

  • How to back up iPhoto Library to an external source?

    I am using OS X Mavericks with iPhoto v9.5.1. This morning iPhoto tells me my photo library is either in use by another application or has become unreadable. Stupidly I have not backed it up.  I am reluctant to try making a repair for fear of losing

  • Location server issue

    Hi, We added 2 new location appliances a existing infrastructure as per documentation.However we cannot see the clients on the maps. Previously all the sties were on one loc appliance but now we have distributed the sites among all 3 appliances. Noti