X-Box Live
I like Linksys but might have to give it up if I can not figure out how to hookup my X-Box 360, can anyone help me. I am getting an MTU failure and unable to connect to live.
Message Edited by byerlyd on 01-30-2009 05:20 PM
So if you to Open the Ports on the Router please follow these steps:-
Hard Wire 1 Computer to the Router with a Ethernet cable to any one of the 4 ports on the Router.
Open an Internet Explorer page and in the Address bar just type the Number 192.168.1.1 and hit Enter.
It will ask you for a username and password, keep the Username blank and the Password type admin.
You will get a Linksys setup page.
Then click on the Application and Gaming tab, then click on the sub tab Port Triggering.
In the Apication name type the Name XBOX without spaces with dahses...
Across it you have 4 boxes for Triggered Range Start and End Port and in the Forward Range Start End Port.
So in the Start port type the number 53 and End port Number 3074, similarly for Forwarded Range Start port type 53 to End port 3074 and check the Enable box and then click on save settings and then on continue.
Please follow this steps the ports will be open for your XBOX.
Similar Messages
-
Can't connect to X-Box live with Air Port Extreme
I just can't figure out how to connect my X-Box (original/first X-Box) to X-Box Live using my Airport Extreme. I am using an X-Box wireless modem. X-Box live phone help told me I needed to contact Apple and have them "Open three NAT Ports: 1. UDP 88, 2. UDP 3074, and 3. TCP 3074. Then to enable UPNP." WHAT?? Since I do not have Apple Care, they are unwilling to help me. I have tried manually entering the IP address and Subnet into my X-Box, but then the X-Box tells me there is no "Gateway" something or other. And I can't seem to find the "Gateway" on my Mac in Airport settings. Can anyone help?
-Thanks!Acces setup page of router .....
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2) On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
ip address :- 192.168.1.20
subnet mask :- 255.255.255.0
default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live. -
I'm having a lot of trouble getting my X-Box live wireless adapter and my Linksys router downstairs...
When I do the test for X-Box live connectivity, everything passes except the MTU test.
I have changed the MTU several times, made sure it's above 1364, even tried some MTU's that are supposedly compatible with AOL, but to no avail. I even called Linksys supportline and no help after a couple hours.
Anyone know what the problem could be?
Thankstry keeping the MTU on 1364....assign a static ip add on the x-box .. say , 192.1681.10 and also the dns address off of the status page on the router ui...
under "applications and gaming" tab , forward ports 88 and 3074....
if nothing works, ensure that u have the latest firmware on the router.... -
Recently, after we upgraded to FiOS my son started noticing lag spikes during games on X-Box Live. (Teleporting, Disconnecting, Etc.)
We had DSL from Verizon, which he originally used the X-Box on, and with the DSL he noticed that it actually was faster then FiOS currently is. Since we can't directly run an ethernet to the router (the router is downstairs), he is currently using ICS on his laptop in order to get an X-Box Live Connection. As I said, with DSL, there were no problems at all. We think it may be router-related.
Any help is greatly appreciated.yes that sounds like a wireless lag issue. there are only a few options for that.
1) run a Ethernet cable to the xbox.
2) get a wireless booster
3) get a second wireless device and place it closer to the xbox. (the option I have done myself) -
Droid X hot spot work for X-box Live???
Does anybody know if it the Mobile Hot Spot would work for x-box live?
Jurgy30 wrote:
Does anybody know if it the Mobile Hot Spot would work for x-box live?
Yes, it can work for Xbox Live. However keep in mind you will exceed the data limit very quickly and if you play any multiplayer games you will be very LAGGY.
For smooth multiplayer on Xbox live you need a download speed of 8mbps, and upload of 2-4mbps. Your droid X will give you numbers like 1.4-2.0 mbps down, and 700k-1.0mbps up. -
T-Box Live TV slow to start...
Recently live TV on my t-box has begun to be really slow to start up. When I power on my t-box the selected channel takes ages to start. I get a black screen, and sometimes even a meessage saying "channel not available", but after a while (10 or 20 seconds) it starts working...and reception does not drop out. All recordings are working ok.I suspect that it may have only started doing this since either a) the last update, or b) the last power failure.Has anyone else had this issue?
Have you performed a soft reset/deep sleep?
If that doesn't work and you know you have good signal then T-Box support 1300 136 841 would be able to run through some additional troubleshooting with you. -
I can't connect to X-box live anymore! Help please!
I've had xbox live since Sunday and it's worked fine since then. I'm using a Linksys WRT54G with Microsoft's own wireless adapter. When I first got it hooked up, I was using WEP and the xbox live lady on the phone told me to use my phone number for that code and it connected right away after some power cycling. Well, this morning I went to connect and it wasn't working at all. It get's to the IP address and fails. I called xbox live on the phone again and they told me to use a WPA code that I got off my computer. So after half and hour and more power cycling, it connected and after I hung up the phone with the lady, it became unconnected again. Ok, obviously I'm not the smartest person when it comes to this stuff so I REALLY need some guidance on how I should do this. Should I be using WEP or WPA and why can't I stay connected?
Acces setup page of router .....
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2) On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
ip address :- 192.168.1.20
subnet mask :- 255.255.255.0
default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live. -
would 1mbps be to slow or just good enough for xbox live? With games like call of duty and sports games? thank you, this is probably a stupid question but any answer would be greatly appreciated.
First of all, it should work, but you will have to port forward your modem (verizon tech support does not support this, but it is easily done, check out portforward.com) the screen shots may be different and you may have to fish around your modem to find the Port Forwarding section, but the number and infromation needed is the same. that is step 1. step 2 if step 1 does not resolve the issue, is to contact verizon tech support and request your line be changed from "interleave" to "Fast Channel" this will reqire them escalating the issue to your MCO but the change is very dramatic for gammers. Dont' forget to give me Kudos.
-
WRT54G v. 6 router and an x-box
I have a WRT54G v. 6 Router, and I have an X-box. The router is used to connect my laptop wirelessly to my computer. Can I connect the x-box to my laptop and get a connection to x-box live, or do I have to connect the x-box to the router directly? The reason I am asking this is because I don't have a T.V. near my regular computer.
Oh yes, and does the game appear on the computer or on the T.V.?
Message Edited by Arcaneous on 12-30-200607:27 PM
Message Edited by Arcaneous on 12-30-200607:30 PMafter downloading the exact firmware of your router, click on the link below to get the instructions on how to upgrade the firmware of your router
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=557&p_created=108421...
"a helping hand in a community makes the world a universe" -
Time Capsule, Airport Express and Xbox Live
Recently I went out and bought a Time Capsule 1TB hoping to extend my wireless network. I knew that Apple products wouldn't usually help extend a DLINK network so it came as no surprise when I could not extend my DLINK network. My solution was to buy a new Airport Express, disable the wifi on the DLINK router and extend the Airport Expresses network via the Time Capsule.
The current situation is: DLINK <-> Ethernet <-> Airport Express Wireless Time Capsule <-> Ethernet <-> Xbox360
The issue is the Time Capsule as far as I can see. For apparently no reason it will change from a solid green status light to a flashing amber status light. Signing my Xbox into Xbox Live seems to be a trigger, but the Time Capsule goes amber even when the Xbox isnt on at all. When it does change to flashing amber I am no longer able to detect it within Airport Utility and as such am unable to diagnose the issue. Any help would be appreciated.Here it works fine. I have a Time Capsule connected to my ADSL modem. I had to buy an all new Airport Express 802.11n, though, because my old AE could not extend my network.
On an all 802.11n setup you just check the "Allow this network to be extended" on the master (Time Capsule), and choose "Extend a wireless network" on the remotes.
The X-Box is connected with an Ethernet cable to the Airport Express, and connection to X-Box Live works fine.
Good luck! -
I'm hoping this is the right forum and I apologize if it's not.
I'm planning on buying a wireless router to hook up to X-Box Live. So I was wondering if there's a preferred router to pick up that'll be compatible with my eMac?
Any help or info will always be appreciated
eMac G4 Mac OS X (10.2.x)Any Ethernet-compatible router will work on a Mac, as long as it's a hardware one.
-
In the next version , would it not be possible to be able to make a text box "LIVE" or HOT" with some basic parameters that are automatically generated, such as seen when printing like...
NAME of File
DATE
TIME
COLORS
and a user defined,
This would save so much time. Every studio I know creates their own TAG or SHIRT TAIL with
Information on which designer worked on the job, version of job, colors in job, etc. It would be great if this could be automatically updated. Especially when most of this info today can be applied
thru printing.Hi Mr/Ms Hi
you cannt compare the performance for these two 'type' & 'like'.
Like - it works like as a data type. like as a user defined data type.
Type - it works like as a standard data type.
pls reward pts.
Regards
Deepanker -
Does Airport Extreme/Airport work with X Box live ? Apple rep at local store does not believe that it works !!!!
Also if it does work is there a way to boost the range ??
txNo, I doubt its your router. I knoe for a fact that Xbox Live works on BOTH the Airport Express and Airport Extreme. I am using the extreme right now in my dorm room. Ok so do you have a password on your wireless network? That is step one. So if you do not have a Airport password, then turn on your Xbox 360 and go to the "System tab" on the main dashboard (it is the farthest right) and click down to the "Network Settings" and then click edit settings. If you have the wireless adaptor for the Xbox 360 (http://www.xbox.com/en-US/hardware/x/xbox360wirelessnetadapter/default.htm) then you should have an option to select the very bottom section which says "wireless mode." That will get you in the right direction. The way I have mine set up is that I have a hardwire going directly from the back of the 360, into the LAN port of the Airport Extreme so It is more hardwired than it is wireless. But I have the wireless bridge and It does work just as well but in my "tight" living quarters of college that was the best choice.
So let us know if you have a password on the Airport and if you have the Xbox 360 wireless adaptor. -
WRT54G ver 6, MTU test fails when trying to connect to Xbox360 live
MTU test fails when trying to connect wirelessly to Xbox360 live. Firmware is current. I have a WRT54G version #6, Motorola Surfboard SB5101 Cable Modem, running AOL HighSpeed Broadband through Time Warner Cable. Changing the MTU setting does not work. I have tried several other suggestions found on these boards but nothing seems to work. Any help would be greatly appreciated!
hi twhale.... If you had already tried the settings i posted ... in such case you can do one thing .... access router setup page ... under Security ... uncheck block wan request ... click save settings .... Under Applications & Gaming tab ... click port range forwarding .... forward ports 88 & 3074 for the static Ip of the X-BOX ... click save settings . Click save settings ... check X-BOX live test ... if still shows the same error ... upgrade/reflash the firmware ...
-
I properly installed my WRT54G wireless router and have my internet working fine on my computer. All the proper lights are working on the router as well. I am having difficulty connecting to xbox live. I am using the xbox wireless adapter also. My xbox recognizes the network and has 4 green bars so the connection is good. It is set up to infrastructure, and the security and SSID are correct. When i try to test my connection, it says "Wireless Network Not Connected". Apparently my xbox notices the network but I cant get them connected. Someone please help, I greatly appreciate it. Merry Christmas!
I just did the exact same thing and got the same message. When I did the test the first time, under the WPA key, I typed in Personal. When I ran the test, I got the same message as you. then I typed in the Encryption Key letters and numbers instead(it's a 22 digit code) of Personal, and the test ran fine until I got down to X Box Live-it said FAILED. This is now where I am stuck.
Maybe you are looking for
-
Greetings! I'm a noob and not so much of a techie, henceforth I would greatly appreciate your input. Referring to the above matter, it was stated on my Xperia Ion that I would need to update Whatsapp to the latest version from Google PlayStore in ord
-
ITunes could not connect to the iTunes Store?
Out of the blue I can no longer connect to the iTunes Store - never had a problem before, haven't changed anything. According to the help page I should call my ISP - I did, they said they do not block any websites, I have the latest version of iTunes
-
can some one help me in converting this php code to plsql procedure to handle response code from authorize.net' gateway's response so that i can call it like http://mysite.com/!my_proc < ?php // Get the subscription ID if it is available. // Otherwis
-
Tapimgmt.msc not found on Windows 7 or 8 workstations
We are trying to work with a TAPI application in our office ... Everything appears to install properly, however, when we go to configure the workstations, we are told that tapimgmt.msc is not found. This happens on our Windows 7 and Windows 8 workst
-
Adding broadband to an existing package – is it po...
A phone call from BT prompted me to look into adding broadband to my home phone line. The helpful sales person insists that the only way to do this is to take out a long contract, 12 or 18 months, and to accept a "free" router. The reason for the req