X-Fi digital out problem with FPS 2000 speak

I just upgraded my old SB Li've! to X-Fi ExtremeMusic.
I connected my 4. digital FPS 2000 Cambridge Soundwork speakers to the digital i/o port at the back of the sound card, but I could only hear from front speakers. Nothing from the rear speakers.
Also when I run the speaker connection wizard, after I pick digital output, the program only allows me to select either headphone or 2. speakers even though I connected to my FPS2000 which is 4. speakers.
Is it because my orginal mini-plug to DIN converter cable from FPS2000 is a 3-pole only and X-Fi digital out port is 4-pole? If that's the case, is it possible to buy a 4-pole mini-plug to DIN converter cable which works for FPS2000?
Will this cable http://us.creative.com/products/product.asp?category=3&subcategory=58&product=0375 &nav=systemRequirements
work?

Actually you are having exactly the same problem as other users with DTT3500 or 5700 speakers. The X-Fi does not support the DIN connection. The digital-out of the X-Fi is the industry standard SPDIF. This means only 2-channels can be sent!
You should connect your FPS speakers to the analog outs of the soundcard. Quality will be anyway better, as the X-Fi includes modern DACs at 24-bits, which is not the case of the FPS2000 speakers.

Similar Messages

  • SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

    JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
    The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
    I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
    The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
    Karen

    OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
    HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
    Thanks anyway! Any comments or advice will still be appreciated.

  • Error out problems with measuring frequency VI

    I am having some error out problems with measure frequency VI. The instructions is change error out from indicator to control but does not work. Anyone can help? The VI is attached
    Attachments:
    Measure Frequency VI error.vi ‏27 KB

    This VI does not have an error out. Obviously, you replaced a subVI that did have an error out with this one, otherwise you would not have been able to create this wire.
    Simply remove the wire or save the subVI with another name then modify it to have the error out that you are looking for.
    Hope that this helps,
    Bob
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

    Try going into your settings and 'reset all settings'
    You will need to retweak your device but it's been said to help with sound issues.

  • I have a problem with the phone speaker

    I started yesterday to have a problem with the phone speaker, I cant hear anything when using the normal speacker, but its ok when using the loud speaker. I dont know what happened. its not working nether with phone calls nor calling apps such as viber

    If you have a docking station try putting it on there.  I lost my sounds, docked it and they came back immediately.

  • Hi i am having problems with a crackling speaker on calls. Its started with every once a hour or so, to now being every call. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update

    Hi i am having problems with a crackling speaker on calls. Its started with every once a hour or so, to now being every call. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update to ios 5... What should i do. I have now resulted in using another phone as i cannot operate like this...

    Hi i am also having problems with a crackling speaker on calls every few calls. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update to ios 5... I will watch to see what advice you get.

  • Report generation toolkit problem with office 2000 and office XP

    Hello, I am having a problem with running my vi after it is compiled with application builder. The dev machine is an XP box and the targer is windows 2000. I included _Excel Dynamic VIs.vi and _Word Dynamic VIs.vi from the office 2000 section of the install cd (for the report toolkit) in the compile but did not include those files for XP. When I run the application on the target machine (2000), the reporting functions call Excel just fine and the program does not come up with any errors. The program however, is not loading the approprate template and inserting the approprate data. Did I leave some neccessary files out of the compile? Thanks in advance!
    Greg
    Gregory Osenbach, CLA
    Fluke

    Hi Acer,
    The recommended procedure in your case is to install Microsoft Office 2000 on the development machine and then reinstall the LabVIEW Report Generation Toolkit. When the toolkit is installed, it will check for the current version of Office and install the corresponding VIs to support it. The VIs include different ActiveX calls according to the version of Office. Therefore it is not enough to change the support manually without having the correct version of Office installed first.
    However, I would recommend that you just try to run your executable on a machine that has Office 2000 installed. The difference in the ActiveX API for Office XP and 2000 is not that significant, so your application might work perfectly on an Office 2000 machine. If you try to run the executable on a machine with Office 97 installed I'm willing to bet my right arm that you will experience errors.
    Good luck Acer!
    - Philip Courtois, Thinkbot Solutions

  • Timed out error with Fp-2000 while find devices

    When I try to Find Devices in MAX (version 3.1) I get the error "The connection to a remote device timed out". With the File Transfer and the Install Software I don't have the problem. I tried to use a different Workstation, different IP Address but the problem persists. Do you have a solution?
    Vincenzo Pascariello

    Hi,
    the 2 flashes of the Status led are indicating that the software is not properly installed.
    As for the Devices not found problem, I don't think the problem has to do with MAX, FP software or LabVIEW 7.1.
    When devices are not found, generally there is a communication problem.
    This can be possibly due to 2 situations:
    1) There is a bent Pin on one of the FP-TB which is making the Fieldpoint bus not to work properly.
    2) There are network problems. One way to workaround this might be to connect to the FP-2000 using a crossover cable and link directly to the PC. This avoids any network connection problems.
    The last thing you need to take into account is that the FP-2000 module might be damaged and need repair.
    If you are unable to get to a solution, contact NI Tech Support at
    02.41.30.92.17 and ask for support with an Engineer
    Regards,
    AlessioD
    National Instruments

  • Digital output problem with new Audigy 2 driv

    I updated to the 02.08.0004 drivers today and everything seemed fine till after I calibrated my speakers within speaker settings. I have Z680s hooked up to a Audigy 2 PCI card using both digital out and analog. As with previous drivers I calibrated using 6 Channel direct input.
    Anyway, the problem is that when I use windows media player or any other media app, with the speakers set to Coax input (digital) I get the sound coming from the rear 2 speakers, instead of through the front 2 as it should. However, this only happens if I choose a speaker calibration under speaker settings.
    It's a bit annoying because I didn't have this problem before. Anyone else have this problem or a solution? Or is it a case of Rolling back to an old driver and hoping the problem doesn't stick?
    Thanks

    Anyone have any ideas?

  • Persistent Behavior Tracking (Portal4.0) problem with MSSQL 2000

    Hi,
    We are having some problems with the Presistent Behavior Checking fucntion.
    When we turned that on, we found out that once we add the
    'com.bea.b13n.trackig.listeners.BehaviorTrackingListener class' to the event
    service, navigating the samples templates will return 'java class not
    implemented' error. We have tried the Microsoft JDBC beta driver and it was
    not working neither (quite predictable : ) ). However, when we tried
    another 3rd party product from http://www.j-netdirect.com/ , it worked well
    and all the JDBC 2 class was supported as claimed (or course, you have to
    pay for that). In this case, do you guys com accross the same problem?
    It is quite odd that portal 4.0 claimed to be support SQLServer 2000 but the
    JDBC packaged performed otherwise. I've tried to reach for both the
    support and pre-sales with no answer for a long time now...
    Below is a portion of the error message:
    ####<2002/1/10 ¤U¤È02®É13¤À02¬í> <Error> <Tracking> <tdlp0yy> <portalServer>
    <ExecuteThread: '7' for queue: 'default'> <> <> <402207> <Error persisting
    event to database.>
    java.sql.SQLException: java.sql.SQLException: This JDBC 2.0 method is not
    implemented
    at
    weblogic.jdbc.rmi.SerialPreparedStatement.setCharacterStream(SerialPreparedS
    tatement.java:428)
    at com.bea.p13n.util.jdbc.JdbcHelper._setClob(JdbcHelper.java:424)
    at com.bea.p13n.util.jdbc.JdbcHelper.setClob(JdbcHelper.java:404)
    at
    com.bea.p13n.tracking.internal.persistence.BehaviorTrackingPersister.setPrep
    aredStatementData(BehaviorTrackingPersister.java:93)
    at
    com.bea.p13n.tracking.internal.persistence.AbstractDatabasePersister.persist
    (AbstractDatabasePersister.java:157)
    at
    com.bea.p13n.tracking.internal.persistence.BufferManager$PersistenceRequest.
    execute(BufferManager.java:250)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    ####<2002/1/10 ¤U¤È02®É32¤À22¬í> <Error> <Tracking> <tdlp0yy> <portalServer>
    <ExecuteThread: '14' for queue: 'default'> <> <> <402207> <Error persisting
    event to database.>
    java.sql.SQLException: java.sql.SQLException: This JDBC 2.0 method is not
    implemented
    at
    weblogic.jdbc.rmi.SerialPreparedStatement.setCharacterStream(SerialPreparedS
    tatement.java:428)
    at com.bea.p13n.util.jdbc.JdbcHelper._setClob(JdbcHelper.java:424)
    at com.bea.p13n.util.jdbc.JdbcHelper.setClob(JdbcHelper.java:404)
    at
    com.bea.p13n.tracking.internal.persistence.BehaviorTrackingPersister.setPrep
    aredStatementData(BehaviorTrackingPersister.java:93)
    at
    com.bea.p13n.tracking.internal.persistence.AbstractDatabasePersister.persist
    (AbstractDatabasePersister.java:157)
    at
    com.bea.p13n.tracking.internal.persistence.BufferManager$PersistenceRequest.
    execute(BufferManager.java:250)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    ####<2002/1/10 ¤U¤È04®É00¤À30¬í> <Alert> <WebLogicServer> <tdlp0yy>
    <portalServer> <ExecuteThread: '4' for queue: 'default'> <system> <>
    <000228> <The disabling of server logins has been requested by system>
    Pls advise, thanks guys.
    Regards,
    Cal

    Hi.
    Please try posting your question on weblogic.developer.interest.personalization
    - more people reading that newsgroup have experience with Portal.
    Regards,
    Michael
    cal wrote:
    Hi,
    We are having some problems with the Presistent Behavior Checking fucntion.
    When we turned that on, we found out that once we add the
    'com.bea.b13n.trackig.listeners.BehaviorTrackingListener class' to the event
    service, navigating the samples templates will return 'java class not
    implemented' error. We have tried the Microsoft JDBC beta driver and it was
    not working neither (quite predictable : ) ). However, when we tried
    another 3rd party product from http://www.j-netdirect.com/ , it worked well
    and all the JDBC 2 class was supported as claimed (or course, you have to
    pay for that). In this case, do you guys com accross the same problem?
    It is quite odd that portal 4.0 claimed to be support SQLServer 2000 but the
    JDBC packaged performed otherwise. I've tried to reach for both the
    support and pre-sales with no answer for a long time now...
    Below is a portion of the error message:
    ####<2002/1/10 ¤U¤È02®É13¤À02¬í> <Error> <Tracking> <tdlp0yy> <portalServer>
    <ExecuteThread: '7' for queue: 'default'> <> <> <402207> <Error persisting
    event to database.>
    java.sql.SQLException: java.sql.SQLException: This JDBC 2.0 method is not
    implemented
    at
    weblogic.jdbc.rmi.SerialPreparedStatement.setCharacterStream(SerialPreparedS
    tatement.java:428)
    at com.bea.p13n.util.jdbc.JdbcHelper._setClob(JdbcHelper.java:424)
    at com.bea.p13n.util.jdbc.JdbcHelper.setClob(JdbcHelper.java:404)
    at
    com.bea.p13n.tracking.internal.persistence.BehaviorTrackingPersister.setPrep
    aredStatementData(BehaviorTrackingPersister.java:93)
    at
    com.bea.p13n.tracking.internal.persistence.AbstractDatabasePersister.persist
    (AbstractDatabasePersister.java:157)
    at
    com.bea.p13n.tracking.internal.persistence.BufferManager$PersistenceRequest.
    execute(BufferManager.java:250)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    ####<2002/1/10 ¤U¤È02®É32¤À22¬í> <Error> <Tracking> <tdlp0yy> <portalServer>
    <ExecuteThread: '14' for queue: 'default'> <> <> <402207> <Error persisting
    event to database.>
    java.sql.SQLException: java.sql.SQLException: This JDBC 2.0 method is not
    implemented
    at
    weblogic.jdbc.rmi.SerialPreparedStatement.setCharacterStream(SerialPreparedS
    tatement.java:428)
    at com.bea.p13n.util.jdbc.JdbcHelper._setClob(JdbcHelper.java:424)
    at com.bea.p13n.util.jdbc.JdbcHelper.setClob(JdbcHelper.java:404)
    at
    com.bea.p13n.tracking.internal.persistence.BehaviorTrackingPersister.setPrep
    aredStatementData(BehaviorTrackingPersister.java:93)
    at
    com.bea.p13n.tracking.internal.persistence.AbstractDatabasePersister.persist
    (AbstractDatabasePersister.java:157)
    at
    com.bea.p13n.tracking.internal.persistence.BufferManager$PersistenceRequest.
    execute(BufferManager.java:250)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    ####<2002/1/10 ¤U¤È04®É00¤À30¬í> <Alert> <WebLogicServer> <tdlp0yy>
    <portalServer> <ExecuteThread: '4' for queue: 'default'> <system> <>
    <000228> <The disabling of server logins has been requested by system>
    Pls advise, thanks guys.
    Regards,
    Cal--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • TOSLINK/SPDIF optical digital out problem

    Dunno what the problem is here. I've used a mini-Toslink adapter and cable to successfully send a digital signal to my amplifier with my Macbook Pro and a previous iMac G5 iSight, but recently failed to do the same with my new 24" iMac. The red light and the Sound preferences suggest that the digital output is working, but no sound comes out. The same setup works fine with my MBP's digital output, so I can't explain the problem on the iMac.
    Does anyone know of any other ways to test or verify that the digital output is working? Perhaps there is another way to turn the digital output on/off? I'm hoping this is a software issue ...
    Thanks.

    I'm having a similar problem / issue with the digital outs...
    I'm sending a digital signal via a mini-TOSlink adaptor to my MOTU 828mkII ADAT IN... first problem is that unless I set the MOTU's clock to ADAT IN... (and not use it's only internal clock) then I get digital noise when I playback anything on my iMac... since there is no way to set the iMac clock in Audio Midi Setup to External... it's greyed out.
    The larger issue is that playback works fine as long as the Audio driver is being used... i.e. iTunes playiing something back. When I stop any audio playback... about 30 seconds later, the MOTU sync light starts flashing as it's NOT receiving a sync signal from the iMac anylonger. Then if I start playback again it takes about 2-3 seconds for the playback to sound. Totally unacceptable...
    I noticed a few things... first off... I also send a signal from my MOTU BACK to my iMac through the iMac's digital IN. With the Digital Output on the iMac, plugging in the TOSLINK cable will automatically change the OUTPUT in Audio Midi Setup to Digital Out... when plugging in the 2nd cable to Digital In, Audio Midi Setup DOES NOT change to Digital In unless you start audio playback, and that's where the 2-3 seconds lag comes in. When you actually hear the playback, if Audio Midi Setup is open... you can see the INPUT switch from Line In to Digital In... and if you stop playback, you can see the Digital In go BACK to Line In about 30 secs later... which should NOT be happening... although technically the Digital in should have NO effect on the Digital Out here anyway... and in truth it doesn't... taking the Digital In out of the equation totally - I still see the same issues... just find it interesting that this is happening.
    Anyhow, I have no advice to help you out rwcoch... I wish I did... this is ridiculous! I'm going to search a bit more and see if anyone else has anything remotely similar...
    Can anyone else try to replicate my issue? Try sending a digital signal to another sound card... ?
    Thanks

  • Digital Out Problem

    Hey
    I have a very bothersome Problem.
    Every time I boot into XP Sp2 via bootcamp the internal speakers won't shut up.
    The original speakers I wan't to use are connected via optical out. SPIF
    There is always a kind of low echo. I hate this.
    Additional: Under OS X everything is fine!
    What I already did:
    Play around with the Realtek panel.
    Try to mute in OSX and then switch to XP.
    Install Drivers over and over....
    Please help!

    I had this problem, and it's one of those stupid fixes that you want to yell at the universe for.
    In the right-hand part of the desktop toolbar, click the "Volume" icon, and set the slider all the way down to the bottom. Don't click mute, though, because that mutes everything, including the digital out.
    If that doesn't work properly, right-click the "Volume" icon, and select "Open Volume Control." Put the Master Volume slider all the way down, and leave all the others as is. Your SPDIF should be greyed out, which is what the digital would be.

  • Some problems with FPS

    Good Evening everyone,I have one problem and I need to fix it of course
    I have MSI GE70 2PE Apache Pro.This is my first notebook so I do not know a lot of things about gaming nooteboks.I am pretty happy with the performance when my notebook is plugged in but I have big problem with performance on battery.I can play on 40fps(for me not that bad) like for 10 minutes and then just suddenly my FPS dropped to 10-15FPS every time when my notebook is plugged out.And then it is really hard to play...
    Sorry for my bad english I hope you understand me
    Thanks

    It's a gaming laptop which will do its best to consume both AC power and battery power to provide you the maximum performance. If you unplugged the AC power, of course it will affect the performance of the gaming experience since it can only consume power from the battery.
    The important thing is, will you get FPS drops even when you're using both AC power and the battery?

  • Communication problem with FP-2000 and Labview 7.1

    I am using the FP-2000, DO-403 and TC-120 modules with Labview 7.1, being run on a host computer via an ethernet connection.  The setup has operated flawlessly for ~2 years; recently, I have noticed that while a VI is running on my PC, connection to the FP module ceases.  There is no pop-up "connection error" in my VI, and the all the power and status LEDs on the FP modules are normal.  I can still interact with the VI on the front panel while it is running, but nothing is passed to the FP module.  I have tried communicating with MAX when this occurs and receive a "no connection" message.  Is there a simple solution here, such as rebooting the FP module?  Or is it time to invest in new hardware?
    Justin

    I am having a very similar problem with my cFP-1804 and Labview 7.0.  I have no problem initiating communication over ethernet, and the vi will run perfectly for hours or even days.  Inevitably, however, at some point there is no longer communication with the cFP-1804.  Data is no longer being passed either to or from the cFP-1804, and MAX will show that the device is not connected.  I also will not see any pop-up error message that says the connection has been lost, either from Windows or from Labview.  The vi will just continue to run as if nothing has happened.  Turning the power to the cFP-1804 off and then on will always resolve this problem.  Since I am using the cFP-1804 primarily for data logging, however, this behavior is particularly problematic as the system will record nothing but zeroes until I discover that the communication has been severed and perform the manual power cycling.
    I have been unable thus far to determine the cause of this problem.  Any help would be greatly appreciated.
    Thanks,
    Derrick

  • Video out problem with Dynex 32" 720p TV

    Hi folks.  I bought my new Dynex TV a few days before New Years.  It's great, really sharp, and I've had no problems with it.  However, I do have a DVD recorder so I can record my games.  Tonight, I attempted to use the A/V output on my TV and connected them to my DVD recorder (which plugs into my computer).  I clicked "capture" and got an error telling me that a connection could not be established and that I should double check my cables.  I could hear the audio playing through my laptop speakers just fine.  I couldn't see the video, for some reason .
    It's not the cables, I just took them off of my old TV to use them here.
    What can I do?  Should I return my TV?

    What about output from a gaming console, like a PS3? Is that only digital sources or does it matter how the PS3 is connected to the television to determine if's its a digital or analog signal?  Right now I get no output when I try to send the video of my PS3 to my composite video in on my computer's TV tuner card.

Maybe you are looking for