X-Fi ExtremeMusic Software doesn't look ri

I just installed the card last night and I figured I would just get the latest drivers from the web, rather than use the CD. The card works but the software does not look at all like what's advertised everywhere. I just have a boring panel with tabs that I can go to to turn on and adjust parameters. But I have no EQ which is rather strange.

Make sure you're using the supplied applications, instead of the standard Windows ones. The mixer/EQ will differ aswell depending on which mode you are. You can switch between the modes (Entertainment Mode, Audio Creation Mode and Game Mode).
Missed the part where you mentioned you went right for the updated drivers. I'd recommend installing the CD first and then the update. The update doesn't include all of the applications that are on the CD, it's a small download compared to a full CD install.
Cat
Message Edited by Catherina-CL on 2-20-2005 02:44 PM

Similar Messages

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install.

Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.

The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod. The iCloud backup and restore took a long time, but worked. I was very grateful.
Trying again to backup to iTunes locally proved to be the same challenging problem. The same backup to corrupt file was the message. The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error.
When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy. Any restore would need to be from the iCloud which already worked but isn't the final solution.
Your suggestions were good, I am just in the same boat. Any thoughts about doing the following?
1) creating a cloud backup
2) resetting the iPod to factory defaults
3) removing all traces of iTunes from my computer and
4) installing iTunes and setting up iPod from scratch.
This is the next thing on my list.

[T410s] Lenovo Software doesn't work for me

Hi,
System:
- T410s 2912 W69, (8 GB RAM)
- Windows 7 Prof. 64bit
The following software is installed on my system: Office Prof. Plus 2010 (64bit), SQL Server 2008 R2 (64bit), Visual Studio Ultimate 2010, Sybase Powerdesigner 15.2, Adobe Reader 9 and Kaspersky IS 2011.
Since some days nearly the whole Lenovo Software doesn't work. The only exception is System Update 4.
When I try to start e.g. Lenovo Toolbox I get the error message "ThinkVantage Toolbox doesn't work...". A View into the Windows solution center offers the following message:
Beschreibung
Stopped working
Pfad der fehlerhaften Anwendung: C:\Program Files\PC-Doctor\pcdrcui.exe
Problemereignisame: CLR20r3
Problemsignatur 01: pcdrcui.exe
Problemsignatur 02: 6.0.5692.7
Problemsignatur 03: 4c87004b
Problemsignatur 04: PresentationCore
Problemsignatur 05: 3.0.0.0
Problemsignatur 06: 4b594d40
Problemsignatur 07: 5017
Problemsignatur 08: 0
Problemsignatur 09: System.TypeInitialization
Betriebsystemversion: 6.1.7600.2.0.0.256.48
Gebietsschema-ID: 1031
The same problems occured in starting e.g. the lenovo power manager, the fingerprint reader etc. and the graphics properties window (gfxui.exe)
Beschreibung
Stopped working
Pfad der fehlerhaften Anwendung: C:\Windows\System32\GfxUI.exe
Problemereignisame: CLR20r3
Problemsignatur 01: gfxui.exe
Problemsignatur 02: 8.15.10.2154
Problemsignatur 03: 4c2053e7
Problemsignatur 04: PresentationCore
Problemsignatur 05: 3.0.0.0
Problemsignatur 06: 4b594d40
Problemsignatur 07: 5017
Problemsignatur 08: 0
Problemsignatur 09: System.TypeInitialization
Betriebsystemversion: 6.1.7600.2.0.0.256.48
Gebietsschema-ID: 1031
I also try to reinstall the ThinkVantage Toolbox via http://web.lenovothinkvantagetoolbox.com/index.html. The installation fails with the following protocol:
Informationen über das Aufrufen von JIT-Debuggen
anstelle dieses Dialogfelds finden Sie am Ende dieser Meldung.
Ausnahmetext
System.UnauthorizedAccessException: Der Zugriff auf den Pfad "full_5692_08_64_00.exe" wurde verweigert.
   bei System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive)
   bei System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive)
   bei appupdater.utility.ProcessLauncherManager.DeleteFiles(String exePath)
   bei appupdater.utility.ProcessLauncherManager.LaunchProcess(String exePath, Boolean bWaitForExit, Int32 sleepInMilliSeconds, String buildID)
   bei appupdater.formcontrols.download.DownloadProgressFooter.LaunchInstall()
   bei appupdater.controllers.UIBuildIDManager.NotifiyDownloadDelegate.Invoke(Boolean bFlag)
   bei appupdater.controllers.UIBuildIDManager.UpdateDownloadComplete(String buildID, String saveFileName, DownloadStates state)
   bei appupdater.utility.DownloadLargeFile.m_webClient_DownloadFileCompleted(Object sender, AsyncCompletedEventArgs e)
Geladene Assemblys
mscorlib
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4952 (win7RTMGDR.050727-4900).
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll.
mscorlib.resources
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4952 (win7RTMGDR.050727-4900).
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll.
appupdater
    Assembly-Version: 1.0.5551.3.
    Win32-Version: 1.0.5551.03.
    CodeBase: file:///C:/Users/STEPHA~1/AppData/Local/Temp/nsk41D2.tmp/appupdater.exe.
System.Windows.Forms
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4927 (NetFXspW7.050727-4900).
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll.
System
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4927 (NetFXspW7.050727-4900).
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll.
System.Drawing
    Assembly-Version: 2.0.0.0.
    Win32-Version: 2.0.50727.4927 (NetFXspW7.050727-4900).
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll.
System.Configuration
    Assembly-Version: 2.0.0.0.
The rest of the software mentioned above works great and fast. Only the Lenovo software doesn't work. This is rather annoying, because I can't change e.g. important property values in the power manager.
I've deinstalled and installed (manually) again graphics driver as well as the troubleshooting software without success.
What shell I do now?
Regards
Dorian
Moderator edit: Title adjusted to better reflect message content

Dorian,
You found me! Thanks for the logs. They confirmed what I was suspecting: a font problem is causing any application built on Windows Presentation Foundation (WPF) to crash. Based on our research there are two potential issues. The fixes are pretty easy.
One or more of your installed fonts does not have a proper date/time
The Registry may have some invalid font path entries
To Detect and Fix the Font Invalid/Missing Date Problem
Open an elevated command prompt (CMD.EXE) and navigate to C:\Windows\Fonts\
Save a font listing to your desktop with the command: DIR *.* /tw /od > %USERPROFILE%\desktop\fontlist.txt
3. Open fontlist.txt with notepad.
4. Remove any fonts with a missing or invalid date (January 1, 1601 for example). Easiest way to do this is by opening Windows Explorer, going to the fonts folder (C:\Windows\Fonts\), and removing the offending fonts.
5. Open LTT or one of the other TVTs to see if the problem is solved. If not, continue with the next section.
To Detect and Fix the Font Registry Problem
WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. I cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk!
Open the Registry Editor (REGEDIT.EXE)
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts
Scan the "Data" column for each font looking for any illegal path characters
If any are found, remove the offending characters. Here are some blogs that may offer additional insight: http://code.logos.com/blog/2009/11/how_to_crash_every_wpf_application.html and http://alissonsol.blogspot.com/2009/02/when-wpf-applications-dont-start.html
Let me know how it goes.
Stephen Streufert
Senior Product Marketing Manager
PC-Doctor, Inc.
http://www.lenovothinkvantagetoolbox.com

I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it

I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it looks OK. The photo looks incorrect in other software such as photo books.
Looking at the same photo before flattening, what is being shown is only the top layer.
How do I correct this?

STEVEN1A wrote:
I have manipulated a photo using layers etc and then flattened it and saved it under a new name. When I use 'Preview' (mac) to view the finished photo it doesn't look right. It's as the layers have not flattened correctly. When viewed in Elements 12 it looks OK. The photo looks incorrect in other software such as photo books.
Looking at the same photo before flattening, what is being shown is only the top layer.
How do I correct this?
The top layer is indeed the one that is visible, unless there is/are area(s) of translucency on that layer, so that you can visualize a portion of the subjacent layer.
the finished photo it doesn't look right. It's as the layers have not flattened correctly.
Are your settings targeted to have the printer manage colors, or, to have PSE manage colors?

MY CONVERTED DOCUMENT DOESN'T LOOK THE SAME

WHEN I CONVERTED THE DOCUMENT ..IT DOESN'T LOOK THE SAME.. MISSING LETTERS.. ODD CHARACTERS ETC

Converted from what to what? Using what software?
P.S. please don't post in all-caps; it is very difficult to read!

My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.

My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.
They error message I get is "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."
This only started after I upgraded my OS to Yosemite.

The upgrade has been know to break Photoshop CS5 installs. An Uninstall/Reinstall may be necessary.

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

HT4904 Help. I have an older 20 inch iMac and had Lion running on it but the internal hard drive died. I'm trying to install Lion on an external drive but it doesn't look like Lion Recovery is supported. I have Leopard installed but am stuck.

Hello,
My 20inch iMac's internal drive died and I'm trying to re-install Lion on an external drive. If I could get the Lion DMG file I think I'd be all set but am not sure how to do this. It doesn't look like the Lion Recovery feature is supported in my older iMac. And I have Leopard installed on the external drive but there's no AppStore to download the Lion DMG file.
Any suggestions?
Thanks,
-Lee

Without a bootable backup/clone or a Time Machine backup of your previous Snow Leopard installation or a saved copy of Lion's install app, you'll have to upgrade your Leopard volume to Snow Leopard (10.6.6+) so you can waste another hour or more DLing the Lion thing again.

HT1338 I need to update my software in order to download the new version of iTunes in order to put songs on my new iPod. But my software doesn't need updating..or so my computer says. What should I do??

I need to update my software in order to download the new version of iTunes in order to put songs on my new iPod. But my software doesn't need updating..or so my computer says. What should I do??

If your iMac has a PowerPC processor, Leopard OS 10.5.x is the max OS. If your iMac has an Intel processor, it can run Snow Leopard OS 10.6.x or possibly higher.
Once we know your iMac model, we can better recommend what OS X version.
 Cheers, Tom

I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won't launch apps. When asked say "launch Facebook" Siri responds with "it doesn't look like you have an app named Facebook" and I get the same results when trying to launch any

I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won’t launch apps. When asked say “launch Facebook” Siri responds with “it doesn’t look like you have an app named Facebook” and I get the same results when trying to launch any app. Siri works for everything else it just won’t launch apps. Any ideas? Thanks.

I have this same problem... Seems like nobody else does. Siri won't launch any apps for me, including native apps.

VMWare Fusion partition software doesn't work in Yosemite, why?

VMWare Fusion partition software doesn't work in Yosemite, why?

Very outdated. You need V7
And FYI, this software has nothing to do with partitioning, it neither creates nor needs one.

Downloading windows support software doesn't proceed

hello
I m trying to bootcamp my macbook pro
the tast status for downloading windows support software doesn't proceed.
it stops half way
what is going wrong? how can I make it work?..
thanks!

I use exFAT file system and it also stops half way.
I try to formatted in FAT file system.
now the issue is slove.
thank you

Settings for a 1280 x 720 video (720p) that doesn't look like garbage?

I've been toying around for a while, but I can't seem to find a decent method to render my 1280x720 video that doesn't look like crap.
I've switched between several video types (mainly avi and mov), but I can't find a suitable method.
I am a total noob to this stuff and though I'd prefer to use a .mov or .avi file (since any PC can pretty much play them), I need some good setting to output a quality video.
All of this stuff about bitrate/pixel type/etc, I just have no idea what I'm doing.
I appreciate any advice.

See: FAQ:What export settings should I use?
You will also find links to many free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie

Iweb website doesn't look good on our web server (apache2)

hello,
I made a website on iweb and then published it to a folder. I then copied the files to our web server (linux, sles9). When I viewed the files on my laptop, it looked fine. But when I put the files on the web server, it looks bad.
please see www DOT tkminc DOT com
Why are all the spaces full of capital letter A's? It's not just that. The second page doesn't look good either. I was all happy about using iweb until I saw the results on the web server. Why is this happening?
Thanks,
oskar

Why are all the spaces full of capital letter A's?
I don't see any A's.
But if one does see such characters, it is normally because the server is (mis)configured to force all browsers to use the wrong encoding. See this note:
http://homepage.mac.com/thgewecke/iwebchars.html

X-Fi ExtremeMusic Software doesn't look ri

Similar Messages

Maybe you are looking for