X-fi fatal1ty device not detected when running speaker selection wizard

Gx-fi fatalty device not detected when running speaker selection wizard? ?
System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
Origional CD fails to detect the card, claiming a supported device is not present.
This card has worked prevously, and is verified as fully functional in windows Vista. ?
Please note Windows Vista can not be used.
I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
does anyone hav a sugestion that is not already posted on this forum.

Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
I'm guessing that the card is pretty much toasted eh?
--Jakk

Similar Messages

Organization not detected when running E2010 SP3 setup

I am working on an Exchange 2010 organization with two multi-role servers in it. They are running SP2 with no rollups. I attempted to install an additional server using SP3 media, but during the setup, it does not detect the existing Exchange organization,
but instead asks me if i want to create the First Organization object.
Initially I thought that perhaps this might be because some schema needed updating, so I ran setup /PrepareDomain using the SP3 media, but when I reran GUI setup, I got the same thing: it doesn't see an existing Exchange org and wants to create one called
First Organization.
I used ADSIEdit to confirm that the Exchange org objects were there, but I'm not sure what to look at next.
Any ideas?
Dave Shackelford

Hi Shackelford,
Please make sure we are operating as Administrator.
Please make sure the DC/GC server running well during the setup.
Please verify whether the services are running well.
Feel free to contact me if there is any update.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Sony Smartwatch 2 - device not detected when plugging into laptop

Hi, When plugging my smartwatch 2 into my laptop I get that the USB device cannot be detected / no driver error and PC companion doesn't recognise it too. I know it's not a laptop issue as I connect my Xperia Z tablet and Z1 phone to it fine. Any help would be much appreciated. Gavin
Solved!
Go to Solution.

The SW2 isn't a device that will be detected as an external device being connected - Updates are done via an app update and apps are done via the phone - So you can't transfer files to it merely charge it via your Laptop
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

Device not detected My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net.

Device not detected
My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net. Still the problem has not been solved

Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts

Video device not detected

I am new to using flash media live encoder, very little
knowledge on how this works. I downloaded it today and plugged my
JVC HD 110 with firewire and got the error message that no video
device was detected when I opened the application. I also tried
using my Sony Handycam connecting it with a USB and still nothing.
I am running the encoder on the PC side of my Mac using Parallels.
Any thoughts?

The Mac thing may throw this for a loop, but try buying a
Dazzle RCA to USB converter (yes, even if your camera already has
USB-sometimes cameras does not have a setting to allow the video
out in real time).
Once you connect the Dazzle (they are at every computer store
'Micro Center', etc.), it will be in the list to select, if it
already isn't the systems selected choice-you will be able to
select it. Now, if your video camera does not have RCA and it has
the 1/8 inch or any other plug-you may be back to scratch (if you
have the 1/8 inch-you can adapt that to RCA and continue from
there).
Good Luck!
Happy Holidays,
Dirty South TV

[FINALLY SOLVED] "Audio device not detected by EAX Console/Speaker Setting Panel" Prob

PROBLEM: A message pops up saying "The audio device supported by this application is not detected" when clicking on any Creative Utilities like EAX Console or the Speakers Control Panel.
SOLUTION: After 6 hours of trying out all solution advices/attempts for the problem above, I figured that there are only 2 ways to get rid of this issue.
[color="#ff0000"]st way: Kill your whole system, by doing format C:
[color="#800000">2nd way: Follow this advice from Shag:
[color="#800000">?
[color="#800000">An installation error causes this problem which in the first instance is addressed by ensuring that you have disabled the onboard audio. If this does not work in the second instance you will need to uninstall the card as follows:
() Uninstall software and drivers either, through control panel or the installation CD
(2) Move the card to PCI slot 3 (if not already there) [VERY IMPORTANT]
[color="#800000">?
[color="#800000">(3) Manually remove registry entries as follows:
. Delete the files from "\Creative".
2. Delete the following registry node from the registry
- HKLM\Software\Creative Tech\Software Installed
- HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uni nstall\5CDDF96A-BC34-4D72-9ABA-EFFF0C39977
(4) Reinstall the software and drivers.
Eventually I'd like to recommend the Creative Team to put this solution in the FAQ, since I counted at least 20 members in this forum, having the same problem without getting to a solution.
Cheers,
Diabolius

BTW just in case people search for the error message in German:
in German the pop up says:
"Das von dieser Anwendung unterst?tzte Audioger?t wurde nicht gefunden"

M-audio device not detected

I keep getting this message no matter what I do. Every time I try to op the M-audio firewire software, PT m-powered 7, I always get that message. "m-audio device not detected on this mac". I can't figure it out.

Is the device turned on? The blue light should be solid blue (not flashing).
If it never goes solid blue, try a different cable, try using the adapter power (not bus power). Run System Profiler and check that your firewire bus does not say "No information found". Make sure you have the latest drivers installed. Is the audio device shown in the System Preferences -> Sound drivers? Is the audio device one of the few compatible ones with PT M-Powered?
Never hot plug the firewire cable, especially if any device is bus powered.
See where that lot gets you...

SAP Gateway- environmental variables not loaded when running brconnect

Hello
i have installed the Sap gateway on MSCS
and the RFC check in sm59 is successful,
However when i run a job in db13 it fails with "brconnect is not recognized as ......... "
<sid>adm has all environmental variables set correctly
SAPService<SID> has them too
when i run brconnect on OS level it works fine with <sid>adm and SAPService<SID>
however if create a brconnect.cmd file where i specify the command as
SET ORACLE_SID= ....
SET SAPDATA_HOME=....
C:\windows\sapcluster\brconnect.exe ...........
and run it in sm69 it works fine
Any ideas how to solve this, seems the variables are not taken when running sapxpg
, i don't want to edit the SDBAC for every command
P.S
set from sm69 returns only the system wide variables, however i have the two systems on this host, and can not make the environmental variables for ORACLE_SID and SAPDATA_HOME system wide as this will cause problem with the other sap system
Edited by: Yavor Markov on Apr 12, 2010 6:07 PM

Hi Markov,
Can you tell us with which user id you have installed SAP as well as check the sap services are running with which user id, if it is not <sid>adm then you have to check the environment variables of that user.
Also you can try adding c:\windows\sapcluster in PATH environment variable.
Regards,
Kishore Soma

How do I enlarge the "presenter notes" window when running my presentation on an external display?

In the latest version of Keynote, the "Presenter Notes" window is a small horizontal field at the bottom of the presenter's computer screen. Only 3-4 lines of text can be seen. This means that when you have a few paragrahs of notes, you have to scroll through them as you are presenting. This is very cumbersome. In the previous version of Keynote you could change the relative size of the slides versus the "presenter's notes" boxes when running a presentation on an external display, but in the new version, I can't find a way of enlarging the "presenter's notes" field.
Also, in the new version, the preview slide doesn't show the initial text on the next slide if that text emerges as a "dissolve in" build when you advance forward through your slides. I always have the initial text on my slides automatically "dissolve in" after each slide transtion. But in the new version of Keynote, when in presenter mode, I can't see any of the text on the "next slide." This makes it difficult to anticipate what slide comes next . . . without going to the Navigator. Does any one have a solution for this?
Thank you.

I figured it out with the help of a post from a few days ago. Although posted for a different problem, I followed these steps from Cornelia-I and it worked like a charm:
You can change the link of LR to the images from the network drive to your local drive, best done on parent folder level: right-click the highest folder in library left panel, and choose update storage location. In the opening dialog window point it to your internal folder.

RE: my input fields does not display when running the page

my input fields does not display when running the page
why is that so?

Hi,
Can you send the HTML code for us?
Afonso

Audio device not detected in control panels

+Audio device not detected in control panelsa I've been using my X-Fi Platinum with Windows 7 64-bit fine for around a month now. Recently I encountered a problem where I couldn't record any sound including talking on Teamspeak. I decided to reinstall the drivers, so I cleaned them out with a driver cleaner tool, and reinstalled. Everything works fine again, but none of the applications will work anymore. They all give an error message about not being able to detect the device. This includes AutoUpdate, Creative Audio Control Panel, and Creative Console Launcher. The card appears to be working correctly everywhere else: Device manager, teamspeak works fine now, windows recorder, guitar rig (guitar amp emulator), dx diag, all working well.
I also tried installing Daniel_K's driver pack to no avail.
Any ideas?
Thanks,
Glorfindel

/Hi Glorfindel,
Did?you?reinstall the applications from the installation cd?
Download and install the latest applications from our support site to see if it helps, click on the link and select your product. Note that some of the applications are not available on Windows 7.

HT1296 i am trying to load my iphone3 via my computer, but it gives a message that device not connected, when it is clearly showing on the control panel

i am trying to load my iphone3 via my computer, but it gives a message that device not connected, when it is clearly showing on the control panel

Hi glomp,
From the information provided, it sounds like your device may not be fully recognized by iTunes. Here are two articles (depending on your computer's operating system) for troubleshooting this:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Have a good one,
- Ari

Why does phone say "this device not supported" when charging

why does phone say "this device not supported" when charging?

If it is clean connect a 2nd accessory of the same kind to see if you need to replace the accessory or continue troubleshooting the phone.

I'm getting a message "USB Device Not Recognized" when I try to sync my iPad. What should I do?

I'm getting a message "USB Device Not Recognized" when I try to sync my iPad. What do I do?

Is the iPod Touch specifically stated as being compatible? Have you tried to perfrom a hard reset of the iPod with it still connected? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock

HT3887 why does my iPhone say device not supported when connecting to my make even after it has successfully paired?

why does my iphone say device not supported when connecting to my mac pro, even though it has already succesfuly paired? I also use a wirless bluetooth keyboard and mouse on the computer successfully.
Also when I turn Bluetooth on on the phone the devices cog never stops turning (forever serching for a device)

iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer.
It couldn't be much easier than that as you don't actually have to do anything more than normal.
This lets you listen to voice memos on your computer and provides a backup if you delete them from iPhone.
Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
USB syncing is far faster than Bluetooth.

X-fi fatal1ty device not detected when running speaker selection wizard

Similar Messages

Maybe you are looking for