X-fi midi reverb (again) - does this work or wh

I've just swapped from SBLi've Platinum to X-fi Platinum. I'm using Sonar 4 XL.
I'm trying to add reverb to midi tracks (as I successfully did on the same midi tracks on SBLi've). However, I can't get it to happen on the x-fi.
I know there's been a long inquest into this subject on this message board, but I can't work out whether there was a definiti've yes/no on whether it works; and what Creative's response is. If it does work ... how does it work?
Right - I'm in Audio Creation Mode, I have the mixer. I can select reverb and change parameters and hear what happens to the test drum loop. But I can't get reverb (or any other effects) on the midi track. The label at the top of the column has the correct synth and midi soundfont name. The track slider and solo/mute controls work Ok.
Yesterday I'm sure I did change something which created a reverb. But today - can't get it at all. The audio tracks reverb very well (and I don't want them too because Sonar has all the audio effects I need).
Am I incredibly dumb (actually, yes...) or am I missing something?
Thanks for any help on this.
jdf

Ok - I think I see it now - it's just a very low effect level. Is that right?
jdf

Similar Messages

  • My iPhone was stolen and I have contacted the police who are using the meid number to locate.  How does this work and what are my chances of getting the phone back?

    My iPhone was stolen.  I used Find My iPhone app to lock it and display a message.  The phone has not connected to the internet to locate it.  I contacted the police and they have taken my meid number.  How does this work and what are my chances of getting the phone back?  Are there other ways the theif can use it.  I was told once they put in a new sim card and use it, whatever software the police have, it will show up.

    Honestly? In the US (I can't speak to other countries, though I doubt it works much differently in a lot of the world) The police took your report and filed it either in their computers or, on paper. They will now not think of this again. The only time it will cross anyones mind is if, in the course of entering information into evidence about items recovered or seized at a crime scene, the serial number of an iPhone that was found/seized happens to match yours, in which case you will be contacted.
    The police in the US can and will do nothing to 'blok' the phone and it's not worth their time to try and locate it unless you know for a fact that it was stolen by a big time drug lord, master criminal, or some other such prime target and they can get a court order to track the location of the phone in order to locate this individual for your own purposes.  If they do that, they'll probably keep him under surveilance for a year or so before they act.
    Basically, the police don't care about your phone. If they find it, they will give it back to you. They are not, however, going to go looking for it. They have better things to do.
    I'm sorry, but that's the way it is.

  • HT2357 So how does this work on Mountain Lion? I cannot seem to ignore the iTunes 11 updates, which now seem to appear every 5 minutes!!

    So how does this work on Mountain Lion? I cannot seem to ignore the iTunes 11 updates, which now seem to appear every 5 minutes!!

    Fantastic!  Didn't work at first so restarted App store and tried again.  This time it asked 'ignore update'.  All gone!

  • HTMLResources, does this work in the adobe content viewer on the iPad

    HTMLResources, does this work in the adobe content viewer. I have created my HTMLResources folder with the pdf and zipped it. It how ever does not download anything when I press the button in the content viewer.

    Hi Bob, I just did my test again. What I didn't do in the first place was zip the contents, not the folder. It worked, thank you very much. My next question is can these pdfs be saved into ibooks? Can we download content such as forms that can be filled in and then eamiled back via the ipad mail program?

  • HT3702 I reported a problem and I got a confirmation saying that my money was refund, I have't received anything yet. How does this work?

    I  reported a problem and I got a confirmation saying that my money was refund, I have't received anything yet. How does this work?

    It should be added either to your iTunes account, or possibly to your credit card if the purchase was made on with it.
    How long ago did you get the email ? It may take 48 hours for it to appear - if it's been longer than that and you can't see it on your iTunes balance (and you've tried logging out and back into the account to see if the balance updates) nor on your credit card then try contacting Support again, and include your case number if you have one.

  • Was told a USB device would create a PDF automatically from the data contained within when plugged into my USB port. Doesn't seem to work. How does this work and how can I fix the device I received?

    Acrobat is not on the USB device - only Adobe Reader needed on the PC. How does this work? How can I fix this device if at all?

    You need to ask the people who sold it to you. Doesn't sound like it has anything to do with Reader.
    However, you should be wary of devices that automatically try to open files when plugged in. They can also infect your computers with all kinds of viruses or malware.

  • TS1425 My co worker has given me his iPod to take home and transfer his music to my laptop, however, I am unable to access his music to download it to my computer.  How does this work?

    My co-worker has given me his iPod to take home and transfer his music to my laptop, however, I am unable to access his music to download it to my computer.  How does this work?

    You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
    You can't transfer the full iTunes Library from the iPad back to iTunes.
    There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before.

  • No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

    Hi All,
         It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
    Is there any way around this if i want to use the 2 at the same time?
    How does this work with SharePoint 2013 as i would be doing some migrations?
    Cheers in Advance

    Hi,
    As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
    As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
    you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
    After you choose one of them, you can open the site.
    https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
    When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
    a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
    So I think there are some other reasons to cause the issue.  
    Check these things below:
    1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
    2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
    Settings > SharePoint Designer > ensure Enable SharePoint Designer
     is selected).
    3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
    More references:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
    https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
    Best regards
    Sara Fan
    TechNet Community Support

  • Trying to install iTunes on Windows 8.1.  Apple Application Support was not found.  Error 2.  Uniinstall iTunes and try again, does not work.  Is there a fix?

    Trying to install iTunes on Windows 8.1.  Apple Application Support was not found.  Error 2.  Uniinstall iTunes and try again, does not work.  Is there a fix?

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • HT201335 Does this work with Sky Go? i.e. Can I watch Sky Go on my TV through my iPad?

    Does this work with Sky Go? i.e. Can I watch Sky Go on my TV through my iPad?

    Welcome to the Apple Community.
    No, it won't work, Sky have blocked the ability to mirror the Sky Go app.

  • JP2 Format - does this work in Photoshop Elements 12?

    I need to download a JP2photo.  Does this work in photoshop elements 12?  I have windows 8.

    This jk2 plugin should work in pse 12 for opening jpg 2000 images into the pse 12 editor.
    (you want the 32 bit version that is in the photoshop folder)
    http://www.fnordware.com/j2k/

  • 1GB PC2-5300 667MHz DDR2 Does this work on the 867 Mhz Powerbook?

    PNY 1GB PC2-5300 667MHz DDR2 SODIMM
    Does this work on the 12-inch 867 Mhz Powerbook?
    I know for a fact that it can be upgraded to 1 Gigabyte, but I'm not sure of the exact brands/models that are compatible.

    So is the 1 GB PC2700 the highest/newest model that can be used?
    You could install, for example, PC3200 DDR memory, however, the Powerbook will only use it at the PC2700 level. So no advantage there from a performance standpoint.
    I'm not asking if I can go higher than 1 GB. I already know that 1GB is the maximum. I'm asking if there are other 1 GB cards besides the PC2700. Perhaps other cards that are available and compatible.
    I would stick with Crucial, Kingston (not their valueram), or Samsung memory. You have the link to Crucial, and Kingston is at http://www.kingston.com and Samsung is sold through distributors. OWC at http://www.macsales.com is one vendor I've bought from and would recommend. I've used all 3 brands in Powerbooks with no issues.
    Also this is off topic, but where can I find the tool to remove the certain screws near the keyboard and the lower part of the monitor?
    Tools you might be using are a #0 Phillips head (Lowe's $2 with a companion small flathead), a T6 Torx screwdriver (should also be available at Lowe's), a 4mm socket, and possibly a small allen hex wrench.

  • HT3291 Does this work when listening to radio direct on apple TV? I would like to able to play the radio on apple TV & airport express at the same time.

    Does this work when listening to radio direct on apple TV? I would like to able to play the radio on apple TV & airport express at the same time.

    Welcome to the Apple community.
    No, this doesn't work directly from the Apple TV. However if you play the radio station from your computer you can send it via airplay to both devices, thereby achieving what you require.

  • Does this work with the macbook?

    does this work with the new macbook?
    Apple Mini DVI to Video Adapter
    http://store.apple.com/Apple/WebObjects/ukstore.woa/6644042/wo/Dg4BvxbpYG2k3zYlb 4c1UxPXhbI/8.0.23.1.0.8.25.7.11.0.3
    it dosent state the macbook though

    thanks just got 1

  • Hello! I'm looking to purchase a Bluetooth. I'm really liking the LG Tone Pro. Does this work Good with a Iphone 4S?

    Hello! I'm looking to purchase a Bluetooth. I'm really liking the LG Tone Pro. Does this work Good with a Iphone 4S?

    It should. I don't see why it wouldn't. It all depends on the quality of the headphones though. You should borrow one from someone who has it and test the headphones itself (music, calls, and other features)

Maybe you are looking for

  • Text wrap in text box

    In the book module. I select one of the cover options that has a text box. When I type and get to the end, the text does not wrap to fill the box. Instead it types over the same line. Is there a way to have the text continue to the next line? I am us

  • User input in JDeveloper IDE not working?

    We just started to use JDeveloper. so the problem may be very basic, I could not figure it out what is wrong: I have a java class which is calling a third part application (Lotus Notes, domino server). The task of the class is to open a database on d

  • LOV based on multiple views

    Is it possible to create a dynamic LOV that is based on multiple views? If so, how? Example code?

  • Inbox downloading non-existent emails endlessly

    A few days ago the red "unread mail" counter began rising and rising without downloading any messages. The loading spiral next to the "Inbox" indicates that it thinks it's downloading, and it does not stop. The number began at 300 (I keep a lot of un

  • New JVM with each browser instance

    Hi I am opening an Applet in a new browser window from my menu link I am using the foll. tag to open the applet using JRE1.3 <OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" WIDTH="750" HEIGHT="401" align="baseline" codebase = "/j2re-1_3_