X2-01 giving me trouble browsing internet

Im having problems using internet on my x2-01 ,i can't access social networks and my phone has been configered well.please help on what should do.

Thahblose,
Welcome to Nokia Discussions
You need an active internet connection in order to do that and to check the internet settings of the phone, go to Menu> Settings> Configuration - you may also keep in touch with your network provider to obtain the right settings. Aside from that, you must also have a good reception / network coverage to utilize internet services within the network.
The default security code for Asha and as well as other Nokia phones is 12345.

Similar Messages

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

I use reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine. Now i have upgraded my osx to mavericks. The reliance software gets installed but dosent open giving some er

i used reliance dongle to browse internet on mountain lion, at first it gave me problems but after updating the reliance software it worked fine. Now i have upgraded my osx to mavericks. The reliance software gets installed but dosent open giving some error, Now i cannot use the internet !!! and itz the latest version of reliance software,,, plz help me !!!

At last i did some experiments and it solved my problem... heres the solution :
1. Install the reliance drivers and software from their website.
2. As the reliance software is not supported my mavericks it wont open, but dont worry.
3. Now after installation go to system preferences->network->and select "ZTE Wireless Terminal".
4. Configuration: Default
     Telephone number: #777
     Account name and password should be the owners number.
5.Finish ! press apply and click Connect...
   Enjoy browsing !!!

Having trouble with internet connections using my Apple G5. Updates turn out to be incompatible with my system. What should I do short of trashing the wonderful computer and spending cash I don't have on a new iMac?

Having trouble with internet connections using my Apple G5 OSX 10.4.11. Attempts to upgrade FireFox or Safari results in being incompatible with with this system. Tried to locate earlier versions to replace upgraded incompatible software only to find that problems have worsened with crashing results. What should I do short of trashing this wonderful G5 and purchasing a new iMac which I really can't afford?
Chuck's Dilema

Hi Chuck,
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/
Might also look into iCab & OmniWeb versions.
Also...
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
Might be later ones around also... saw 11.3 I think.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html

Always redirected to u verse verification while browsing Internet.

New uverse customer, still no internet. Did self install. Never been able to browse Internet while on wifi wo being redirected to uverse verification page. Still able to get email/texts. Customer service no help, have reset network, cleared cookies, reset router/modem/tablet, nothing. Never had this trouble w previous providers. If anybody has solution please let me know.

Mbihlmaier wrote:
New uverse customer, still no internet. Did self install. Never been able to browse Internet while on wifi wo being redirected to uverse verification page. Still able to get email/texts. Customer service no help, have reset network, cleared cookies, reset router/modem/tablet, nothing. Never had this trouble w previous providers. If anybody has solution please let me know.
Click the ATT Uverse Care link in my signature below, send the PM, explain your verification situation.
Include your name, account #, email address and a good phone # (land or cell) and time to contact you on.
Check the blue PM envelope, upper right on every page, for their reply. Good luck
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

Unable to browse internet on a domain user's computer through ASA 5503 Firewall

Dear All,
I am trying to configure my new firewall for the last one month but still unable to fix it. I have a domain in windows 2012 standard edition and the firewall with unlimited license. Here is the output of show startup-config. Please note that prpgb.org is my local domain.
prpgbasa# show startup-config
: Saved
: Written by enable_15 at 02:50:45.169 PKT Thu Nov 20 2014
ASA Version 8.2(5)
hostname prpgbasa
domain-name prpgb.org
enable password AExqpLntfuzsVQrq encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.0.0.0
interface Vlan2
nameif outside
security-level 0
ip address 202.142.XXX.YY 255.255.255.252
ftp mode passive
clock timezone PKT 5
dns server-group DefaultDNS
domain-name prpgb.org
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 202.142.XXX.YZ 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 10.0.0.0 255.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 10.0.0.0 255.0.0.0 inside
telnet timeout 5
ssh 10.0.0.0 255.0.0.0 inside
ssh timeout 5
console timeout 0
dhcpd dns 10.0.0.2 255.0.0.0
dhcpd dns 208.67.222.222 208.67.220.220 interface inside
dhcpd lease 86400 interface inside
dhcpd domain prpgb.org interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:23c0af4b2ddf9e925f83ce13909ab900
prpgbasa#
You all are requested to have a look into the problem and suggest me the modifications.
Thanks

Dear All,
I have solved the issue. I have done the following in-order to browse internet on domain user computers. Here are the steps
1. I have disabled my internal DHCP server in the domain.
2. Then I have configured the ASA DHCP server in the default IP address scheme i.e. 192.168.1.100-200
3. I have Connected my ASA to a switch first then from there I connected a cable to my Domain's Server WAN interface. The LAN (192.168.1.2)interface of the Domain server is also plugged into the same switch.
4. I am using my Domain Server's DNS for name resolution and forward queries which are not served by my domain to open dns server.
It works perfectly so far but before applying or setting up the entire netowrk i want your help to look into the configuration file for corrections if i am making any mistakes. Thanks again for your help and here is the output of show confing.
prpgbasa# show startup
: Saved
: Written by Ghaffar at 02:11:24.319 PKT Mon Dec 8 2014
ASA Version 8.2(5)
hostname prpgbasa
domain-name prpgb.org
enable password AExqpLntfuzsVQrq encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ddns update hostname PRPGB.ORG
dhcp client update dns server both
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 202.142.XXX.YY 255.255.255.252
ftp mode passive
clock timezone PKT 5
dns domain-lookup inside
dns server-group DefaultDNS
name-server 192.168.1.2
domain-name prpgb.org
object-group network obj_any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 202.142.XXX.YY 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
aaa authentication serial console LOCAL
aaa authentication enable console LOCAL
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 192.168.1.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.1.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.100-192.168.1.200 inside
dhcpd dns 192.168.1.2 interface inside
dhcpd lease 86400 interface inside
dhcpd domain prpgb.org interface inside
dhcpd update dns both interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username ABC password FL01QCj0LaLWTID0 encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:7c4930a079158c0cb10a42813d3690cd
prpgbasa#
Please suggest me if there are any recomendations.
Thanks in advance.
Ghaffar

My Slot Drive is giving me trouble. Doesn't burn or read discs that i have/want to work!!

My Slot drive is giving me trouble. It will not burn or read discs that i have/want to work on. It makes a strange noise when i put in a blank cd and spits it back out after 20seconds. It will read third party discs no problem which is very strange indeed. Last week i burned photos to a blank disc and went to make a duplicate and this is when the trouble began. Has anyone ever come across an issue such as this before?? Any assistance would be greatly appreciated.

Well it looks like my media i.e. CDs/DVDs have gone past their sell by date. I purchased new discs to test your theory/bad experience and it looks like i too suffer the same fate!! It's great that this problem i have been having seems to be now rectified although it does lead me to a new issue, as the last two/three years of work saved on these discs are being rejected by my iMac If this is the case then what is the point in purchasing and burning discs for storage over a time that is quite reasonable really(at least 5years)!!!!!

Trouble browsing technet on Linux

I have trouble browsing the technet website with Linux. Both in Konqueror and in Netscape. Loads of links are dead or don't work and I cannot get the license agreement accepted when trying to dowload the JDeveloper9i release candidate. I've spend about 10 minutes trying to contact a site-administrator only to discover there doesn't seem to be one.
Hope for some response,
Guido

Hi,
Which version of Konqueror are you using? I noticed that the older versions don't completely implement several W3C standards and therefore have problems on some sites.
I've been able to access OTN fine using Netscape 4.7, recent Mozilla builds and the Konqueror browser in KDE 2.2. There are occasionally problems at busy times of the day, but these didn't appear to be browser specific.
Brian

Is there any way I can trasnfer my "favourites" from my old browser-Internet Explorer to Firefox?

For example: I have quite a lot of favourites saved on my old browser, Internet Explorer, is there any way I could tranfer them to Firefox??
Many thanks,
Maria

* Export the favorites in IE to an HTML file (bookmarks.html): File > Import and Export
* Import the HTML file in Firefox: Bookmarks > Organize Bookmarks > Import & Backup > Import HTML: From File
See also:
* http://kb.mozillazine.org/Import_bookmarks ("Import from another browser" and "Import from file")
* [[Importing Internet Explorer Favorites from another computer]]
* [[Importing Bookmarks from an HTML File]]

Default Application setting for Browsing Internet

Hi there,
I try to change the defaut application for browsing internet to opera. but I don't see it takes effect. Can anyone kindly advise?
I try change xhtml&xml and text html. as well.
the only place I see it take effect is open the link in email. and no other place(not sure if I missed any place). e.g. search widget still open the default browser, nokia drop also still open default browser.
thanks in advance for any tips.
regards,

and that's how it works, one other thing which requires attention.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

How to set the same in mozilla? : 1. Go to Tools(Internet Browser)- Internet Options- Security

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

''locking this thread as duplicate, please continue at [https://support.mozilla.org/questions/1002512]''
We are using a tool called BMC and we are unable to run reports. In IE the settings 1. Go to Tools(Internet Browser)->Internet Options->Security
2. Select the Security tab
3. Click on the Internet zone icon at the top of the tab page
4. Click the Custom Level button
5. In the Miscellaneous section change Display mixed content to Enable
6. Repeat steps 1 – 5 for the Local intranet and Trusted sites zones
solved the issue, could u suggest how to set the same in Firefox pls?
Thank you!

Mail is giving me trouble after upgrading to OS X 10.10

Mail is giving me trouble after upgrading to yosemite. I am unable to enter settings and change email settings. Can someone please help.

I have had the same issue (and I've seen many posters on here mention this, as well). I have an external FireWire drive that, since upgrading to 10.4.9 is not recognized by my G4 PowerBook. It worked fine before the update. Some have said the issue may have occurred if the drive was connected to the computer at the time of the upgrade but mine was not. I'm patiently waiting Apple to fix this and many other apparent flaws with the latest so-called "upgrade."
P.S. I have never had any issues with previous OSX updates and have been a Mac user for 3+ years.

Having trouble accessing internet with new wireless WRT54...

Having trouble accessing internet with new wireless WRT54G. Used easylink to read existing router BEFSR41 which works great to westell modem provided by Verizon. When connect new router Easylink configures WRT54G but when trying to connect to internet...fails. All lites indicate good. Not using wireless device yet, just the wired ethernet. Router set up as DHCP.
I keep going back to old router and works great every time. Help!

Thanks for response, however I tried setting unit to 192.168.2.1 (leaving DHCP) to no avail. I put my old unit (BEFSR41) back in and I'm back up. I need to sit back and decide which way to go on this. Perhaps it's defective and I should return it.

Suddently can't browse internet... "You are not connected to Internet"

It has been now 2 months that I have an issue with internet with my Macbook Pro.
I am connected to Internet and browsing internet, however suddenly and without any reason Safari/Firefox give me a message you are not connected to internet. However, MSN or YM are still working fine
It happened to me with both Airport and Ethernet connection but only with my specific provider (but only in my macbook pro, not in my pc or iphone)
When the problem occurs, I run a network diagnostic and found the following
- Pinging an address that need DNS won't work (ping www.facebook.com ==> error: host unknown)
- DNS lookup however working: lookup www.facebook.com ==> 66.220.145.10
- Pinging 66.220.145.10 is working
- any traceroute on IP numeric address is working, however when it need DNS it is not working (traceroute www.facebook.com: unknown host)
The workaround I found is to disable and enable again the interface to make it working...
Did someone have experience the issue?
Regards, Bernard

Me too. What a pain!

Unable to browse Internet intermittently

I have a MacBook air 2011 and updated to latest lion last week. Since then I am having trouble browsing using safari and Firefox.
The pages often won't load at all but occasionally work fine.
I have logged on as guest user and safari works fine but I can't figure out what I need to change.
I have reset safari and cleared cache and repaired permissions etc.
Can anyone suggest a next step?
Thanks.

Does your phone receive a valid ip address from your router?
Does it work fine when connected to other wifi networks? If so, then I'd say your router is the culprit.

X2-01 giving me trouble browsing internet

Similar Messages

Maybe you are looking for